- 22 Oct, 2010 13 commits
-
-
Mauro Carvalho Chehab authored
Switch to a state machine that properly handles all incoming urb data packets, and reads much cleaner and corrects some minor parsing errors that were hindering decode on cx231xx/Polaris integrated IR. Also tested with four different mceusb variants, and works perfectly with all of them (at least for the rc6a mce remotes). Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com>
-
Jarod Wilson authored
Jochen Kühner reports lirc_it87 works with his hardware with this device ID. Tested-by:
Jochen Kühner <jochen.kuehner@gmx.de> Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Tighten up error checking, rename some functions to less generic names, remove unnecessary cruft, add missing debug modparam wiring, and fix up some printk output. Signed-off-by:
-
Jarod Wilson authored
Talked to Christoph Bartelmus about this a bit, and he says this driver actually *should* work okay on CONFIG_SMP, the check was a legacy one from the very early days of SMP support before it had stabilized (yes, this driver is that ancient). Also remove some completely unused code, only noticed after building this driver for the first time in an eternity (on an SMP host now, of course). Signed-off-by:
-
Jarod Wilson authored
Fixes an oops when an lirc driver that doesn't provide its own fops is unplugged while the lirc cdev is open. Tested with lirc_igorplugusb, with a special thanks to Timo Boettcher for providing the test hardware. Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Can't explain it (yet), but I've seen the 'get irctl via private_data' setup fail for a number of people (ioctl called before its filled in?), so lets go back to a variant of the old way, but one that still works with unlocked_ioctl. Signed-off-by:
-
Jarod Wilson authored
If an lirc device driver doesn't specify its own fops, we set set ir->cdev.owner to THIS_MODULE. If it does specify its own fops, we set ir->cdev.owner to ir->d.owner. Subsequent module_{get,put} calls should be using ir->cdev.owner, not ir->d.owner. Signed-off-by: -
Jarod Wilson authored
Use names that clearly identify functions as lirc functions. Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
- 21 Oct, 2010 27 commits
-
-
Jean-François Moine authored
The errors were found by checkpatch.pl. Most fixes are: - remove spaces followed by TAB(s), - split lines greater than 80 characters, - move most '{'s from start of line to end of previous line. (Some '{'s at start of line remain when the '}'s are on the same line) Signed-off-by:Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Németh Márton authored
The PO2030N sensor chip found in hama AC-150 webcam supports horizontal and vertical flipping the image by hardware. Signed-off-by:
-
Németh Márton authored
The number 0xdd is used for marking delay init sequence steps. Replace 0xdd values only if the meaning is delay. Signed-off-by:
-
Jean-François Moine authored
The bug was introduced by commit d5aa3856 removing the probe sequence of hv7131r with bridge sn9c120 and so, letting the sensor inactive. Signed-off-by:
-
Jean-François Moine authored
The bug was introduced by commit 23a98274 applying values of sensor sp80708 to sensors hv7131r and mi0360. Signed-off-by:
-
Ruslan Pisarev authored
This is a patch to the tm6000.h file that fixed up a macros and comment error found by the checkpatch.pl tools. Signed-off-by:
Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
Ruslan Pisarev authored
This is a patch to the tm6000-cards.c file that fixed up a space error found by the checkpatch.pl tools. Signed-off-by:
-
Ruslan Pisarev authored
This is a patch to the tm6000-cards.c tm6000-core.c tm6000-dvb.c tm6000-i2c.c tm6000-input.c tm6000-regs.h tm6000-stds.c tm6000-usb-isoc.h tm6000.h files that fixed up a comments warnings found by the checkpatch.pl tools. Signed-off-by:
-
Ruslan Pisarev authored
This is a patch to the tm6000-video.c file that fixed up a braces, tabs, comments and space Errors and Warnings found by the checkpatch.pl tools. [mchehab@redhat.com: some changes didn't apply as it were based to an older version, so used patch -f to apply only the changes that are OK] Signed-off-by:
-
Ruslan Pisarev authored
This is a patch to the tm6000-i2c.c file that fixed "ERROR: do not initialise statics to 0 or NULL" found by the checkpatch.pl tools. Signed-off-by:
-
Jonathan Corbet authored
Add a driver for the video capture port on VIA integrated chipsets. This version has a remaining OLPCism or two and expects to be talking to an ov7670; those can be improved as the need arises. This work was supported by the One Laptop Per Child project. Thanks to Laurent Pinchart for a number of useful comments. Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Daniel Drake authored
The QVGA mode has a green horizontal line on the left hand side, and a red (or sometimes blue) vertical line at the bottom. Tweak the visible area to remove them. Thanks to Mauro for explaining how to fix this. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
-
Derek Kelly authored
This patch changes the name of the av7110 driver from the generic "dvb" to "av7110", to be descriptive of the driver. I've included Oliver Endriss's ack from the original post, which contained a mangled patch. The content of the patch is unchanged. Signed-off-by:
Derek Kelly <user.vdr@gmail.com> Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Michel Garnier authored
Signed-off-by:
Michel Garnier <catimimi@orange.fr> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
In file included from drivers/media/video/cx231xx/cx231xx-audio.c:40: drivers/media/video/cx231xx/cx231xx.h:559: error: field ‘frontends’ has incomplete type make[4]: ** [drivers/media/video/cx231xx/cx231xx-audio.o] Erro 1 make[3]: ** [drivers/media/video/cx231xx] Erro 2 make[2]: ** [drivers/media/video] Erro 2 make[1]: ** [drivers/media] Erro 2 make: ** [drivers] Erro 2 Reported-by:
Marcio Araujo Alves <froooozen@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Polaris design uses MCE support. Instead of reinventing the wheel, just let mceusb handle the remote controller. Acked-by:
Sri Devi <Srinivasa.Deevi@conexant.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Interface 0 is used by IR. The current driver starts initializing on it, finishing on interface 6. Change the logic to only handle interface 1. This allows another driver (mceusb) to take care of the IR interface. Reviewed-by:
-
Mauro Carvalho Chehab authored
For now, it adds support for Conexant EVK and for Pixelview. We should probably find a better way to specify all Conexant Polaris devices, to avoid needing to repeat this setup on both mceusb and cx231xx-cards. Reviewed-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
This avoids a race condition Signed-off-by: -
Mauro Carvalho Chehab authored
Those locking issues affect tvtime, causing a kernel oops/panic, due to a race condition. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead, use core lock handling. Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/cx25840/cx25840-core.c: In function ‘cx25840_s_frequency’: drivers/media/video/cx25840/cx25840-core.c:1563: warning: unused variable ‘state’ Signed-off-by: -
Sylwester Nawrocki authored
Signed-off-by: -
Maxim Levitsky authored
This is just unnessesary, and now more logical Also a lot of refactoring Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
-
Maxim Levitsky authored
Signed-off-by:
-
