- 27 Jun, 2019 1 commit
-
-
Olof Johansson authored
Merge tag 'v5.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt - convert arm boads to json-schema mt8183: - add base SoC and evaluation board - add cpacity-dmips-mhz - add pinctrl, auxadc, spi, and efuse nodes * tag 'v5.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8183: add efuse and Mediatek Chip id node to read arm64: dts: mt8183: add spi node arm64: dts: mt8183: Add auxadc device node arm64: dts: mt8183: add pinctrl device node arm64: dts: mt8183: add capacity-dmips-mhz arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile dt-bindings: arm: Convert MediaTek board/soc bindings to json-schema Signed-off-by:
Olof Johansson <olof@lixom.net>
-
- 25 Jun, 2019 25 commits
-
-
Olof Johansson authored
Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.3 Highlights: - new SoC: S922X (G12B family, A73/A53 big.LITTLE) - new board: Hardkernel odroid-N2 (SoC: G12B S922X) - add/use ethernet PHY interrupt/reset lines - G12A: add/enable audio, PWM, IR, i2c, SD/eMMC, WiFi, bluetooth, network - gxbb-vega-s95 board: fix WiFi/BT, enable more peripherals * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (79 commits) arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt line arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line arm64: dts: meson: g12a: sort sdio nodes correctly arm64: dts: meson-g12a-x96-max: add sound card arm64: dts: meson-g12b-odroid-n2: add sound card arm64: dts: meson: sei510: add sound card arm64: dts: meson: sei510: add max98357a DAC ASoC: meson: add tohdmitx DT bindings arm64: dts: meson: g12a: add the GPIO interrupt controller arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node arm64: dts: meson-g12a-sei510: Enable Wifi SDIO module arm64: dts: meson-g12a-x96-max: Enable Wifi SDIO Module arm64: dts: meson-g12a-x96-max: add support for sdcard and emmc arm64: dts: meson: g12a: add SDIO controller ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree changes for 5.3: - Add i.MX8MQ based Librem5 devkit support. - Add SNVS power key support for i.MX8MQ and i.MX8MM. - Add GPIO alias for imx8mq and i.MX8QXP. - A series from Daniel Baluta to add SAI devices and enable audio support for imx8mm-evk board. - Add DDR performance monitor unit support for i.MX8QXP. - Add irqsteer interrupt controller device for i.MX8MQ SoC. - Add CPU speed grading and all OPPs for i.MX8MM and i.MX8MQ. - Add OCOTP device node for i.MX8QXP. - Various device addition for LS1028A: SATA, qDMA, USB, Mali DP500 and temperature sensor. - Random minor coding style improvements. * tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits) arm64: dts: librem5: enable the SNVS power key arm64: dts: librem5: Limit the USB to 5V arm64: dts: imx8qxp: added ddr performance monitor nodes arm64: dts: imx8qxp: sort LSIO subsystem devices arm64: dts: imx8qxp: sort alias alphabetically arm64: dts: imx8qxp: Add lsio_mu13 node arm64: dts: imx8mm-evk: Enable audio codec wm8524 arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit arm64: dts: fsl: ls1028a: Add qDMA node arm64: dts: imx8mm: Enable SNVS power key according to board design arm64: dts: imx8mq-evk: Enable SNVS power key arm64: dts: ls1028a: add crypto node arm64: dts: ls1028a: Add temperature sensor node arm64: dts: imx8mm: Move gic node into soc node arm64: dts: imx8mm: Move usbphy out of soc node arm64: dts: imx8mm: Pass the 'ranges' property arm64: dts: imx8mm: Pass a unit name for the 'soc' node arm64: dts: fsl: imx8mq: add the snvs power key node arm64: dts: ls1028a: fix watchdog device node arm64: dts: ls1028a: Enable sata. ... Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linuxOlof Johansson authored
i.MX arm32 DT changes for 5.3: - New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based Meerkat96 board, and NXP LS1021A-TSN board. - A series from Andrey Smirnov to update vf610-zii-dev and imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path, adding QSPI device, and dropping unused pinmux. - Update imx6sl and imx6qdl device tree to assign corresponding clocks instead of dummy clock. - Update i.MX6/7 boards from NXP to assign corresponding power supply for LDOs. - Update i.MX6/7 device trees to enable SNVS poweroff key support according to board design. - Update coresight DT binding for i.MX7 according to consolidations for CoreSight replicator and funnel. - A series from Marek Vasut to update M53Menlo board on various devices like UART, USB, ethernet PHY, GPIOs etc. - Enable USBOTG support for imx7ulp and evk board. - A series from Peter Robinson to update imx6sx-udoo board, switching to SPDX License Identifier, enabling I2C devices and bluetooth support. - Add video capture support for i.MX53 and imx53-smd board. - Add PXP device for i.MX6UL. - Other random small updates on various boards. * tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (46 commits) ARM: dts: imx7ulp-evk: enable USBOTG1 support ARM: dts: imx7ulp: add imx7ulp USBOTG1 support ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path' ARM: dts: Add support for 96Boards Meerkat96 board ARM: dts: imx6ul: Add PXP node ARM: dts: imx6sll: Enable SNVS poweroff according to board design ARM: dts: imx7s: Enable SNVS power key according to board design ARM: dts: imx6sll: Enable SNVS power key according to board design ARM: dts: imx6ul: Enable SNVS power key according to board design ARM: dts: imx6sx: Enable SNVS power key according to board design ARM: dts: imx6qdl: Enable SNVS power key according to board design ARM: dts: imx53: Bind CPLD on M53Menlo ARM: dts: Introduce the NXP LS1021A-TSN board ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1 ARM: dts: imx7d: Update cpufreq OPP table ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3 ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT changes with new clock for 5.3: - This is a set of device tree changes with new clocks - adding clock info for i.MX8 GPIO and SNVS RTC device. * tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mq: add clock for SNVS RTC node arm64: dts: imx8mm: add clock for SNVS RTC node arm64: dts: imx8mm: add clock for GPIO node clk: imx8m: Add GIC clock dt-bindings: clock: imx8m: Add GIC clock clk: imx8mm: add SNVS clock to clock tree dt-bindings: clock: imx8mm: Add SNVS clock clk: imx8mq: add SNVS clock to clock tree dt-bindings: clock: imx8mq: Add SNVS clock clk: imx8mm: add GPIO clocks to clock tree dt-bindings: clock: imx8mm: Add GPIO clocks Signed-off-by:
-
Olof Johansson authored
Merge tag 'imx-bindings-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings for 5.3: - Add vendor prefix for Purism SPC. - Add bindings for i.MX8MQ EVK Board, Purism Librem5 devkit and i.MX7 Meerkat96 Board. - Add LS1028A specific compatible into qDMA bindings doc. - Move Emtrion i.MX6 board bindings to schema. - Add missing schemas for i.MX7ULP and i.MX1/31/35 bindings. * tag 'imx-bindings-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add missing schemas for i.MX1/31/35 dt-bindings: arm: fsl: Add back missing i.MX7ULP binding dt-bindings: arm: Move Emtrion i.MX6 board bindings to schema dt-bindings: arm: fsl: Add the imx8mq boards dt-bindings: Add an entry for Purism SPC dt-bindings: fsl-qdma: Add LS1028A qDMA bindings dt-bindings: arm: Document 96Boards Meerkat96 devicetree binding Signed-off-by:
-
https://github.com/rjarzmik/linuxOlof Johansson authored
This is the pxa devicetree changes for 5.3 cycle : - devicetree pinmux support for bias on pxa3xx - devicetree pinmux bias usage for raumfeld * tag 'pxa-dt-5.3' of https://github.com/rjarzmik/linux: ARM: dts: pxa300-raumfeld-speaker-one: add channel output mapping for STA320 ARM: pxa: raumfeld-common: fix comments in gpio_keys pinctrl node ARM: pxa: raumfeld-controller: add pinctrl for charger pins ARM: pxa: raumfeld-controller: fix 'dock detect' GPIO key ARM: pxa3xx: dts: Add defines for pinctrl-single,bias-pull{up,down} Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linuxOlof Johansson authored
AT91 DT for 5.3 - switch to new sckc bindings - convert soc bindings to json-schema * tag 'at91-5.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: dt-bindings: arm: Convert Atmel board/soc bindings to json-schema ARM: dts: at91: sama5d3: switch to new sckc bindings ARM: dts: at91: at91sam9rl: switch to new sckc bindings ARM: dts: at91: at91sam9g45: switch to new sckc bindings ARM: dts: at91: at91sam9x5: switch to new sckc bindings ARM: dts: at91sam9261ek: remove unused chosen nodes Signed-off-by:
-
Olof Johansson authored
Merge tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.3-rc1 This contains the bulk of the Tegra changes this cycle. It has a bunch of improvements across almost all boards. These are mostly small and not too exciting additions. Most notably perhaps is the continuation of Jetson Nano support, which is now mostly on feature parity with Jetson TX1. * tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (28 commits) arm64: tegra: Enable PCIe slots in P2972-0000 board arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT arm64: tegra: Add PEX DPD states as pinctrl properties arm64: tegra: Enable ACONNECT, ADMA and AGIC arm64: tegra: Add ACONNECT, ADMA and AGIC nodes arm64: tegra: Sort device tree nodes alphabetically arm64: tegra: Fix Jetson Nano GPU regulator arm64: tegra: Update Jetson TX1 GPU regulator timings arm64: tegra: Fix AGIC register range arm64: tegra: Add INA3221 channel info for Jetson TX2 arm64: tegra: Enable PWM on Jetson Nano arm64: tegra: Enable CPU sleep on Jetson Nano arm64: tegra: Add ID EEPROMs on Jetson Nano arm64: tegra: Add ID EEPROM for Jetson TX2 Developer Kit arm64: tegra: Add ID EEPROM for Jetson TX2 module arm64: tegra: Add ID EEPROM for Jetson TX1 Developer Kit arm64: tegra: Add ID EEPROM for Jetson TX1 module arm64: tegra: Don't use architected timer for suspend on Tegra210 arm64: tegra: Mark architected timer as always on arm64: tegra: Add pin control states for I2C on Tegra186 ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.3, round 1 Highlights: ---------- MPU part: -Add stm32mp157a-avenger board support: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) , 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet 10/100/1000, WiFi 5 GHz & 2.4GHz, ... -Add STMFX support en stm32mp157c-ev1 and enable joystick connected on it. -Add I2S and SAI support on stm32mp157c. -Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards (EV1 and DK2 inherit of it). -Add camera support: -Add DCMI support on stm32mp157c SOC -Enabled OV5640 camera support on stm32mp157c-ev1 board -Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1 board. MCU part: -Add STMFX support en stm32746g-eval and enable connections on it: leds and joystick * tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (27 commits) ARM: dts: stm32: replace rgmii mode with rgmii-id on stm32mp15 boards ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A dt-bindings: arm: stm32: Document Avenger96 devicetree binding dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157 ARM: dts: stm32: add sai id registers to stm32mp157c ARM: dts: stm32: add power supply of rm68200 on stm32mp157c-ev1 ARM: dts: stm32: enable display on stm32mp157c-dk1 board ARM: dts: stm32: Add I2C 1 config for stm32mp157a-dk1 ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board ARM: dts: stm32: add DCMI pins to stm32mp157c ARM: dts: stm32: add DCMI camera interface support on stm32mp157c ARM: dts: stm32: enable Vivante GPU support on stm32mp157a-dk1 board ARM: dts: stm32: enable Vivante GPU support on stm32mp157c-ed1 board ARM: dts: stm32: Add Vivante GPU support on STM32MP157c ARM: dts: stm32: add i2s pins muxing on stm32mp157 ARM: dts: stm32: add i2s support on stm32mp157c ARM: dts: stm32: add sai pins muxing on stm32mp157 ARM: dts: stm32: add sai support on stm32mp157c ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1 ... Signed-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu dt64 for 5.3 (part 1) For Armada 7K/8K: - enable AP806 thermal throttling with CPUfreq - add missing #interrupt-cells property allowing configuring interrupt for GPIO On Armada 8040 based board: - Fix PCI memory window on Mcbin board - Set SFP power limit on clearfog GT board - Disable AP I2C on Armada-8040-DB On Armada 3720 based board espressobin correct the SPI node used for NOR flash On Armada 7040 DB board add USB current regulators * tag 'mvebu-dt64-5.3-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: add missing #interrupt-cells property arm64: dts: marvell: armada-7040-db: Add USB current regulators arm64: dts: armada-3720-espressobin: correct spi node arm64: dts: marvell: Disable AP I2C on Armada-8040-DB arm64: dts: marvell: Enable AP806 thermal throttling with CPUfreq arm64: dts: marvell: Change core numbering in AP806 thermal-node arm64: dts: marvell: clearfog-gt-8k: set SFP power limit arm64: dts: marvell: mcbin: enlarge PCI memory window Signed-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu dt for 5.3 (part 1) Add LCD support on Netgear RN104 * tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada: netgear-rn104: Add LCD to RN104 dts. Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM64 Based SoC DT Updates for v5.3 * Renesas SoCs - Revise usb2_phy nodes and phys properties according to updated bindings - Use ip=on for bootargs * R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs - Add dynamic power coefficient - Create thermal zone to support IPA * R-Car E3 (r8a77990) and D3 (r8a77995) SoCs - Point LVDS0 to its companion LVDS1 * R-Car E3 (r8a77990) SoC - Corresct register range of DU * R-Car E3 (r8a77990) based Ebisu board - Remove renesas, no-ether-link property * R-Car D3 (r8a77995) based Draak board: - Remove unnecessary index from vin4 port * RZ/G2M (r8a774a1) based HiHope main and sub-boards: - Initial support - Describe CPU capacity and topoligy - Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0 * RZ/G2E (r8a774c0) SoC based EK874 board: - Clean up CPU compatible strings - Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN * tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (53 commits) arm64: dts: renesas: hihope-common: Remove "label" from LEDs arm64: dts: renesas: hihope-common: Add HDMI support arm64: dts: renesas: r8a774a1: Add HDMI encoder instance arm64: dts: renesas: r8a774a1: Add dynamic power coefficient arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC arm64: dts: renesas: hihope-common: Add LEDs support arm64: dts: renesas: hihope-common: Enable USB3.0 arm64: dts: renesas: hihope-common: Add USB 2.0 support arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks arm64: dts: renesas: r8a774a1: Add TMU device nodes arm64: dts: renesas: r8a774a1: Add CMT device nodes arm64: dts: renesas: hihope-common: Add uSD and eMMC arm64: dts: renesas: r8a77990: Fix register range of display node arm64: dts: renesas: cat874: Enable usb role switch support arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device node arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1 arm64: dts: renesas: hihope-common: Add RWDT support arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM Based SoC DT Updates for v5.3 * Renesas SoC based boards - Use ip=on for bootargs * Renesas R-Car Gen 2 SOC based boards - Configure PMIC IRQ pinmux * R-Car V2H (r8a7792) SoC - Describe CMT devices in DT * RZ/G1C (r8a77470) based iWave SBC (iwg23s-sbc) and RZ/G1N (r8a7744) based boards: - Correct SDHI2 VccQ regulator to fix SDR50 mode * RZ/A2M (r7s9210) based rza2mevb EVB RZ/A1H (r7s72100) based rskrza1 board - Describe input switch in DT * RZ/A2M (r7s9210) based rza2mevb EVB - Sort nodes to ease future maintenance - Add USB host, Ethernet and SDHI support * RZ/A2M (r7s9210) and RZ/A1H (r7s72100) SoCs - Describe IRQC device in DT * tag 'renesas-arm-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits) ARM: dts: r8a7792: Add CMT0 and CMT1 to r8a7792 ARM: dts: iwg23s-sbc: Fix SDHI2 VccQ regulator ARM: dts: iwg20d-q7-common: Fix SDHI1 VccQ regularor ARM: dts: rza2mevb: Add input switch ARM: dts: r7s9210: Add IRQC device node ARM: dts: rza2mevb: sort nodes of rza2mevb board ARM: dts: renesas: Use ip=on for bootargs ARM: dts: rza2mevb: Add USB Host support ARM: dts: r7s9210: Add USB Device support ARM: dts: r7s9210: Add USB Host support ARM: dts: rskrza1: Add input switches ARM: dts: r7s72100: Add IRQC device node ARM: dts: r8a779x: Configure PMIC IRQ pinmux ARM: dts: rza2mevb: Add 48MHz USB clock ARM: dts: r7s9210: Add USB clock ARM: dts: rza2mevb: add ethernet aliases ARM: dts: rza2mevb: Add SDHI support ARM: dts: rza2mevb: Add Ethernet support ARM: dts: r7s9210: Add SDHI support ARM: dts: r7s9210: Add RIIC support ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-dt-bindings-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM Based SoC DT Bindings Updates for v5.3 * Renesas Gen3 DWC HDMI TX Encoder - Add RZ/G2M (r8a774a1) support * Renesas R-Car Compare Match Timer (CMT) - Add R-Car H3 (r8a7795), M3-N (r8a77965) and E3 (r8a77990) support * Renesas R-Car CAN FD Controller - Add R-Car M3-N (r8a77965) and E3 (r8a77990), and RZ/G2E (r8a774c0) support * Renesas R-Car CAN Controller - Add RZ/G2M (r8a774a1) support - Correct RZ/G2 clocks * Vendor prefixes: Add vendor prefix for HopeRun * Renesas SoCs and boards: Add HopeRun RZ/G2[M] boards * tag 'renesas-dt-bindings-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: dt-bindings: display: renesas: Add r8a774a1 support dt-bindings: timer: renesas, cmt: Document r8a779{5|65|90} CMT support dt-bindings: can: rcar_canfd: document r8a774c0 support dt-bindings: can: rcar_canfd: document r8a77990 support dt-bindings: can: rcar_canfd: document r8a77965 support dt-bindings: can: rcar_can: Add r8a774c0 support dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks dt-bindings: Add vendor prefix for HopeRun dt-bindings: arm: renesas: Add HopeRun RZ/G2[M] boards Signed-off-by:
-
Olof Johansson authored
Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt This time we only have a single patch for our command branch between arm and arm64, a fix for the array syntax raised by our DT schemas. * tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array Signed-off-by:
-
Olof Johansson authored
Merge tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of arm64 DT changes, this time with: - Some fixes for the DT schemas that were added during this release - Wifi support for the H6 - LRADC suppport for the A64 - Some background work on A64 boards, to enable various devices such as touchscreens, PMIC, audio, wifi, etc. * tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: Add DMA node arm64: dts: allwinner: a64: Add lradc node dt-bindings: input: sun4i-lradc-keys: Add A64 compatible arm64: dts: allwinner: h6: add r_watchog node arm64: dts: allwinner: h6: add watchdog node dt-bindings: watchdog: add Allwinner H6 watchdog arm64: dts: allwinner: a64: Enable audio on Teres-I arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply arm64: dts: allwinner: axp803: add USB power supply node arm64: dts: allwinner: a64: Add pinmux for RGB666 LCD arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodes arm64: dts: allwinner: h6: add PIO VCC bank supplies for Pine H64 arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable GT911 CTP arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node arm64: dts: allwinner: a64: move I2C pinctrl to dtsi Signed-off-by:
-
Olof Johansson authored
Merge tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches: - Some work on the BPi M2-Berry to support various devices - Convert some bindings to a schema, and a lot of fixes reported by the schemas we introduced. - A few other fixes here and there * tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) dt-bindings: pwm: Convert Allwinner PWM to a schema ARM: dts: sun8i: r40: Change the RTC compatible ARM: dts: sun8i: v3s: Add external crystals accuracy ARM: dts: sun8i: v3s: Fix the RTC node ARM: dts: sun6i: Add external crystals accuracy ARM: dts: sun6i: Fix RTC node ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface) ARM: dts: gr8-evb: Fix RTC vendor ARM: dts: sun7i: icnova-swac: Fix the model vendor ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies ARM: dts: sun6i: Add default address and size cells for SPI ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT dt-bindings: bus: Convert Allwinner RSB to a schema ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.3 - SPDX updates - switch to generic ethernet PHY reset bindings - add the canvas module - mxiii-plus board: add regulators * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: switch to the generic Ethernet PHY reset bindings ARM: dts: meson8b: update with SPDX Licence identifier ARM: dts: meson8b-odroidc1: update with SPDX Licence identifier ARM: dts: meson8b-mxq: update with SPDX Licence identifier ARM: dts: meson8: update with SPDX Licence identifier ARM: dts: meson8-minix-neo-x8: update with SPDX Licence identifier ARM: dts: meson6: update with SPDX Licence identifier ARM: dts: meson6-atv1200: update with SPDX Licence identifier ARM: dts: meson: update with SPDX Licence identifier ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805 ARM: dts: meson8m2: mxiii-plus: add the supply for the Mali GPU ARM: dts: meson8m2: mxiii-plus: rename the DCDC2 regulator ARM: dts: meson8b: add the canvas module ARM: dts: meson8m2: update the offset of the canvas module ARM: dts: meson8: add the canvas module Signed-off-by:
-
Olof Johansson authored
Merge tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt This pull request adds CPUFreq support for DA850 boards in device-tree boot using the generic CPUFREQ_DT driver. * tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: Enable CPUFREQ_DT ARM: dts: da850-evm: enable cpufreq ARM: dts: da850-lcdk: enable cpufreq ARM: dts: da850-lego-ev3: enable cpufreq ARM: dts: da850: add cpu node and operating points to DT Signed-off-by:
-
Olof Johansson authored
Merge tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.3 We have various device tree updates from the OpenBMC project to enable bits and pieces in existing systems, notably updates to Google's Zaius. There are some AST2500 machines under development: * Lenovo Hr630 * IBM Swift * Facebook YAMP And some AST2400 machines that have been around but out of tree and have now joined the party: * YADRO VESNIN * Microsoft Olympus * tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Enable video engine on romulus and wtherspoon ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine ARM: dts: aspeed: Add YADRO VESNIN BMC ARM: dts: aspeed: Add Microsoft Olympus BMC ARM: dts: aspeed: Adding Lenovo Hr630 BMC ARM: dts: aspeed: Add Facebook YAMP BMC ARM: dts: aspeed: swift: Add pca9539 devices ARM: dts: aspeed: Add Swift BMC machine ARM: dts: aspeed: cmm: enable ehci host controllers ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots ARM: dts: aspeed: zaius: update 12V brick I2C address ARM: dts: aspeed: zaius: add Infineon and Intersil regulators ARM: dts: aspeed: quanta-q71: Enable p2a node ARM: dts: aspeed: Add aspeed-p2a-ctrl node ARM: dts: aspeed: Add Power9 and Power9 CFAM description ARM: dts: aspeed: Rename flash-controller nodes Signed-off-by:
-
Olof Johansson authored
Merge tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm Device Tree Changes for v5.3 * Add display support to MSM8974 * Add display, backlight, and touchscreen support to MSM8974 Hammerhead * Update coresight bindings for MSM8974 and APQ8064 * tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: msm8974-hammerhead: add support for display ARM: dts: msm8974: add display support ARM: dts: qcom: msm8974-hammerhead: add support for backlight ARM: dts: qcom: msm8974-hammerhead: add touchscreen support ARM: dts: qcom-msm8974: Update coresight DT bindings ARM: dts: qcom-apq8064: Update coresight DT bindings Signed-off-by:
-
Olof Johansson authored
Merge tag 'qcom-arm64-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 Updates for v5.3 * Switch to use second gen PON on PM8998 * Add PSCI cupidle states for MSM8996, MSM8998,and SDM845 * Add MSM8996 UFS phy reset controller * Add propre cpu capacity scaling on MSM8996 * Fixups for APR domain, legacy clocks, and PSCI entry latency on MSM8996 * Enable SMMUs on MSM8996 * Add Dragonboard 845C * Add Q6V5, GPU, GMU, and AOSS QMP node on SDM845 * Fixup CPU topology on SDM845 * Change USB1 to be peripheral on SDM845 MTP * Add PCIe Phy, RC nodes, ANOC1 SMMU, and RPMPD node on MSM8998 * Update coresight bindings for MSM8916 * Update idle state names and entry-method on MSM8916 * Add PCIe, RPMPD, LPASS, Q6, TCSR, TuringCC, PSCI cpuidle states, and CDSP on QCS404 * Add reset-cells property to QCS404 GCC node * Fixup s3 max voltage, l3 min voltage, drive strength typo, and s3 supply definition on QCS404-evb * Fixup ADC outputs and VADC calibration on PMS405 * tag 'qcom-arm64-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits) arm64: dts: qcom: qcs404-evb: fix vdd_apc supply arm64: dts: qcom: pm8998: Use qcom,pm8998-pon binding for second gen pon arm64: dts: qcom: msm8996: Enable SMMUs arm64: dts: qcom: msm8996: Correct apr-domain property arm64: dts: qcom: Add Dragonboard 845c arm64: dts: qcom: qcs404-evb: Enable PCIe arm64: dts: qcom: qcs404: Add PCIe related nodes arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes arm64: dts: qcom: msm8998: Add ANOC1 SMMU node arm64: dts: qcom: msm8996: Stop using legacy clock names arm64: dts: msm8996: fix PSCI entry-latency-us arm64: dts: qcom: msm8998: Add PSCI cpuidle low power states arm64: dts: qcom: sdm845: Add Q6V5 MSS node arm64: dts: qcom: Add AOSS QMP node arm64: dts: qcom-qcs404: Add reset-cells to GCC node arm64: dts: qcom-msm8916: Update coresight DT bindings arm64: dts: qcom: msm8998: Add rpmpd node arm64: dts: qcom: qcs404: Add rpmpd node arm64: dts: qcom: qcs404: Move lpass and q6 into soc arm64: dts: qcom: qcs404: Fully describe the CDSP ... Signed-off-by:
-
git://github.com/hisilicon/linux-hisiOlof Johansson authored
ARM: DT: Hisilicon ARM32 SoCs updates for v5.3 - Updated CoreSight funnel and replicator using new bindings to fix warning for the hip04. * tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi: ARM: dts: hip04: Update coresight DT bindings Signed-off-by:
-
git://github.com/hisilicon/linux-hisiOlof Johansson authored
ARM64: DT: Hisilicon SoCs DT updates for v5.3 * Hi3660 SoC and related boards: - Added CoreSight trace components * Hi6220 SoC and related boards: - Updated CoreSight funnel and replicator using new bindings to fix warning * tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi: arm64: dts: hi3660: Add CoreSight support arm64: dts: hi6220: Update coresight DT bindings Signed-off-by:
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contain Broadcom ARM-based SoCs Device Tree changes for 5.3 please pull the following: - Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI controller - Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files and provides a fix for devices failing to boot after the removal of skelton.dtsi (that commit has been submitted as a separate fix) * tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux: ARM: dts: BCM5301X: Fix most DTC W=1 warnings ARM: dts: NSP: Fix the bulk of W=1 DTC warnings ARM: dts: BCM63xx: Fix DTC W=1 warnings ARM: dts: BCM53573: Fix DTC W=1 warnings ARM: dts: bcm-mobile: Fix most DTC W=1 warnings ARM: dts: Cygnus: Fix most DTC W=1 warnings ARM: dts: Fix BCM7445 DTC warnings ARM: bcm283x: Enable DMA support for SPI controller ARM: dts: bcm: Add missing device_type = "memory" property Signed-off-by:
-
- 24 Jun, 2019 14 commits
-
-
Peter Chen authored
Enable USBOTG1 support for evk board, it is dual-role function port. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Peter Chen authored
Add imx7ulp USBOTG1 support. Signed-off-by:
-
Michael Grzeschik authored
The patch adds the following interfaces according the SMARC Spec 1.1 [1] and provided schematics: - SMARC SPI0/1 Note: Since Kontron still uses silicon revisions below 1.3 they have add a spi-nor to implement Workaround #1 of erratum ERR006282. - SMARC SDIO - SMARC LCD - SMARC HDMI - SMARC Management pins Note: Kontron don't route all of these pins to the i.MX6, some are routed to the SoM CPLD. - SMARC GPIO - SMARC CSI Camera Note: As specified in [1] the data lanes are shared to cover the csi and the parallel case. The case depends on the baseboard so muxing the data lanes is not part of this patch. - SMARC I2S - SMARC Watchdog Note: The watchdog output pin is routed to the CPLD and the SMARC header. The CPLD performs a reset after a 30s timeout so we need to enable the watchdog per default. - SMARC module eeprom Due to the lack of hardware not all of these interfaces are tesetd. [1] https://sget.org/standards/smarcSigned-off-by:Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Daniel Mack authored
These settings are needed to make the hardware operable. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr>
-
Daniel Mack authored
Careless oversight. Signed-off-by:
-
Daniel Mack authored
The PEN2 line needs to be pulled up for the charger to enter high-current mode. Do this with a static pull on the GPIO. Signed-off-by:
-
Daniel Mack authored
The dock detection input key is active low. Also add a pinmux for it. Signed-off-by:
-
Daniel Mack authored
This allows users of the pinctrl driver to specify either pinctrl-single,bias-pullup = MPF_PULL_UP; or pinctrl-single,bias-pulldown = MPF_PULL_DOWN; To activate the pull bits in the MFP registers. Signed-off-by:
-
Angus Ainslie (Purism) authored
Enable the snvs power key. Signed-off-by:
Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by:
-
Angus Ainslie (Purism) authored
The charge controller can handle 14V but the PTC on the devkit can only handle 6V so limit the negotiated voltage to 5V. Signed-off-by:
-
Frank Li authored
Add ddr performance monitor Signed-off-by:
Frank Li <Frank.Li@nxp.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Shawn Guo authored
We prefer to sort device nodes under simple bus in order of unit address. Let's sort the devices under lsio_subsys properly. Signed-off-by: -
Shawn Guo authored
We prefer to sort alias entries alphabetically, so let's move serial0 to the right place. Signed-off-by: -
Daniel Baluta authored
lsio_mu13 node is used to communicate with DSP. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
-
