Add the atomic die chains in, kprobes needs these.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

With the shared APM emulation code being introduced, hp6xx was missed
in the conversion. Get it building again.
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

hp6xx requires some additional IRQs that aren't currently enabled in
the SH7709 setup code. Wire them up.
Signed-off-by: Takashi YOSHII <takashi.yoshii.ze@hitachi.com>
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds more full-featured support for the SH7722 Solution Engine.
Previously this was using the generic board, and lacked most of the
peripheral support.
Signed-off-by: Ryusuke Sakato <sakato.ryusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

With the addition of the R7780MP and R7785RP, the R7780RP build
ended up breaking. Trivial compile fix.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds support for kexec based crash dumps.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Previously this was done in cpuinfo, but with the number of clocks
growing, it makes more sense to place this in a different proc entry.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This fixes up SH7705 CPU support and the SE7705 board
for some of the recent changes.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds the enable/disable hooks for the port clock to sh-sci.
Signed-off-by: dmitry pervushin <dimka@nomadgs.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds support for the SH7722 (MobileR) to the clock framework.
Signed-off-by: dmitry pervushin <dimka@nomadgs.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Drop the hd64461 I/O ops and wire up pata_platform for MMIO.
Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This wasn't being set before, so now it's set for when it makes sense.
The shwdt case still requires HZ to be fixed at 1000 for the WOVF period,
so this is still preserved.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: SUGIOKA Toshinobu <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add support for the SH7780 PCIC on the Solution Engine 7780,
missing from the previous board-support patch.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds support for the SH7780-based Solution Engine reference board.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

By default we don't have anything to fix up for the SH-4 PCIC, boards can
overload this as necessary.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

L-BOX can use the normal PA_AREA5_IO, there's no reason for it to
reproduce it.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Previously we've been handling udivdi3 references and wrapping
them in to div64_32() automatically. This doesn't get a lot of
use, however, and as akpm noted in the recent thread on l-k:

	http://lkml.org/lkml/2007/2/27/241

we're better off simply ripping it out and going the do_div()
route if there happen to be any places that need it.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This reworks some of the node 0 bootmem initialization in
preparation for discontigmem and sparsemem support.

ARCH_POPULATES_NODE_MAP is switched to as a result of this.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Support the SH7712 (SH3-DSP) Solution Engine reference board.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds support for the L-BOX RE2 router.

	http://www.nttcom.co.jp/l-box/

L-BOX RE2 is a SH7751R-based router. It has CF, Cardbus, serial,
and LAN x2. This is one of the very few SH boards that a general
person can obtain now.

The L-BOX shipped with a 2.4.28 kernel, this is a rewritten patch
adding it to current git.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Updates for the landisk board:

	- The push_switch framework was used.
	- landisk_pwb.c was divided into psw.c and gio.c.
	- pata_platform was supported in USL-5P.
	- irq.c was rewritten.
	- io.c was replaced with generic I/O routines.
Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Trivial compilation fixes for the hp6xx drivers.
Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh uses the same sysrq trigger as ppc, update the documentation to
reflect that.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

With the GDB stub being entered via a special sysrq trigger,
we don't want to hit it directly from sci_br_interrupt().
Without this, there is access to the other sysrq triggers when
kgdb is enabled.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This implements stricter and more compliant knightrider strobing in the
heartbeat handler. While there still seems to be some debate as to
whether the double 0 is "more" correct or not, this updated version
appears to have general consensus. Fixes a long-term "bug".
Signed-off-by: Takashi YOSHII <takashi.yoshii.ze@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This enables pata_platform support for the PCMCIA slot on the
SolutionEngine.
Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Each board sets the total number of IRQs that it's interested in via
the machvec. Previously we cared about the off vs on-chip IRQ range,
but any code relying on that is long dead. Set NR_IRQS to something
sensible given the vector range, and allow boards to cap it if they
really care.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Wire up GENERIC_BUG for SH. This moves off of the special bug
frame and on to the generic struct bug_entry. Roughly the same
semantics are retained, and we can kill off some of the verbose
BUG() reporting code.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

SH7780 has a speculative execution mode where it can speculatively
perform an instruction fetch for subroutine returns, this allows it
to be enabled. There are some various pitfalls associated with this
mode, so it's left as depending on CONFIG_EXPERIMENTAL and not
enabled by default.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The kgdb thread support is woefully out of date (it predates
the pidhash), and needs a complete rewrite before it's useful
again. Just rip it out entirely.

Updating the unified kgdb stub is a more worthwhile endeavour
for anyone that happens to be interested in this, at present
it's just limping along.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This code has suffered quite a bit of bitrot, do some basic
tidying to get it to a reasonably functional state again.
This gets the basic support and the console working again.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (38 commits)
  kconfig: fix mconf segmentation fault
  kbuild: enable use of code from a different dir
  kconfig: error out if recursive dependencies are found
  kbuild: scripts/basic/fixdep segfault on pathological string-o-death
  kconfig: correct minor typo in Kconfig warning message.
  kconfig: fix path to modules.txt in Kconfig help
  usr/Kconfig: fix typo
  kernel-doc: alphabetically-sorted entries in index.html of 'htmldocs'
  kbuild: be more explicit on missing .config file
  kbuild: clarify the creation of the LOCALVERSION_AUTO string.
  kbuild: propagate errors from find in scripts/gen_initramfs_list.sh
  kconfig: refer to qt3 if we cannot find qt libraries
  kbuild: handle compressed cpio initramfs-es
  kbuild: ignore section mismatch warning for references from .paravirtprobe to .init.text
  kbuild: remove stale comment in modpost.c
  kbuild/mkuboot.sh: allow spaces in CROSS_COMPILE
  kbuild: fix make mrproper for Documentation/DocBook/man
  kbuild: remove kconfig binaries during make mrproper
  kconfig/menuconfig: do not hardcode '.config'
  kbuild: override build timestamp & version
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (66 commits)
  KVM: Remove unused 'instruction_length'
  KVM: Don't require explicit indication of completion of mmio or pio
  KVM: Remove extraneous guest entry on mmio read
  KVM: SVM: Only save/restore MSRs when needed
  KVM: fix an if() condition
  KVM: VMX: Add lazy FPU support for VT
  KVM: VMX: Properly shadow the CR0 register in the vcpu struct
  KVM: Don't complain about cpu erratum AA15
  KVM: Lazy FPU support for SVM
  KVM: Allow passing 64-bit values to the emulated read/write API
  KVM: Per-vcpu statistics
  KVM: VMX: Avoid unnecessary vcpu_load()/vcpu_put() cycles
  KVM: MMU: Avoid heavy ASSERT at non debug mode.
  KVM: VMX: Only save/restore MSR_K6_STAR if necessary
  KVM: Fold drivers/kvm/kvm_vmx.h into drivers/kvm/vmx.c
  KVM: VMX: Don't switch 64-bit msrs for 32-bit guests
  KVM: VMX: Reduce unnecessary saving of host msrs
  KVM: Handle guest page faults when emulating mmio
  KVM: SVM: Report hardware exit reason to userspace instead of dmesg
  KVM: Retry sleeping allocation if atomic allocation fails
  ...

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits)
  [ARM] Add comments marking in-use ptrace numbers
  [ARM] Move syscall saving out of the way of utrace
  [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro
  [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header
  [ARM] mm 10: allow memory type to be specified with ioremap
  [ARM] mm 9: add additional device memory types
  [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6
  [ARM] iop: add missing parens in macro
  [ARM] mm 7: remove duplicated __ioremap() prototypes
  ARM: OMAP: fix OMAP1 mpuio suspend/resume oops
  ARM: OMAP: MPUIO wake updates
  ARM: OMAP: speed up gpio irq handling
  ARM: OMAP: plat-omap changes for 2430 SDP
  ARM: OMAP: gpio object shrinkage, cleanup
  ARM: OMAP: /sys/kernel/debug/omap_gpio
  ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon
  ARM: OMAP: Enable 24xx GPIO autoidling
  [ARM] 4318/2: DSM-G600 Board Support
  [ARM] 4227/1: minor head.S fixups
  [ARM] 4328/1: Move i.MX UART regs to driver
  ...

Conflicts:

	include/asm-arm/arch-ixp4xx/io.h