- 21 Jun, 2013 6 commits
-
-
Jussi Kivilinna authored
This patch adds unaligned buffer tests for blkciphers. The first new test is with one byte offset and the second test checks if cra_alignmask for driver is big enough; for example, for testing a case where cra_alignmask is set to 7, but driver really needs buffers to be aligned to 16 bytes. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Jussi Kivilinna authored
Patch adds check for alg_test_descs list order, so that accidentically misplaced entries are found quicker. Duplicate entries are also checked for. Signed-off-by:
-
Jussi Kivilinna authored
This reverts commit cf1521a1. Instruction (vpgatherdd) that this implementation relied on turned out to be slow performer on real hardware (i5-4570). The previous 8-way twofish/AVX implementation is therefore faster and this implementation should be removed. Converting this implementation to use the same method as in twofish/AVX for table look-ups would give additional ~3% speed up vs twofish/AVX, but would hardly be worth of the added code and binary size. Signed-off-by:
-
Jussi Kivilinna authored
This reverts commit 60488010. Instruction (vpgatherdd) that this implementation relied on turned out to be slow performer on real hardware (i5-4570). The previous 4-way blowfish implementation is therefore faster and this implementation should be removed. Signed-off-by:
-
Jussi Kivilinna authored
Add implementation tuned for more performance on real hardware. Changes are mostly around the part mixing 128-bit extract and insert instructions and AES-NI instructions. Also 'vpbroadcastb' instructions have been change to 'vpshufb with zero mask'. Tests on Intel Core i5-4570: tcrypt ECB results, old-AVX2 vs new-AVX2: size 128bit key 256bit key enc dec enc dec 256 1.00x 1.00x 1.00x 1.00x 1k 1.08x 1.09x 1.05x 1.06x 8k 1.06x 1.06x 1.06x 1.06x tcrypt ECB results, AVX vs new-AVX2: size 128bit key 256bit key enc dec enc dec 256 1.00x 1.00x 1.00x 1.00x 1k 1.51x 1.50x 1.52x 1.50x 8k 1.47x 1.48x 1.48x 1.48x Signed-off-by: -
Arnd Bergmann authored
The MODULE_LICENSE macro invocation must use either "GPL" or "GPL v2", but not "GPLv2" in order to be detected by the module loader. This fixes the allmodconfig build error: FATAL: modpost: GPL-incompatible module bcm2835-rng.ko uses GPL-only symbol 'platform_driver_unregister' Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Dom Cobley <popcornmix@gmail.com> Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Matt Mackall <mpm@selenic.com> Cc: linux-rpi-kernel@lists.infradead.org Acked-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
- 05 Jun, 2013 9 commits
-
-
Linus Walleij authored
The Nomadik HW RNG driver has seen some rust and is not preparing the clock before use. Fix this up so we get rid of runtime complaints from the clock subsystem. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Jingoo Han authored
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Sachin Kamat authored
These symbols are referenced only in this file and hence should be static. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Tested-by:
Tobias Rauter <tobiasrauter@gmail.com> Signed-off-by:
-
Sachin Kamat authored
Use NULL instead of 0 for pointer variables. Signed-off-by:
-
Sachin Kamat authored
devm_* APIs are device managed and make cleanup and exit code simpler. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Also, unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: -
Joel A Fernandes authored
Calling runtime PM API for every block causes serious perf hit to crypto operations that are done on a long buffer. As crypto is performed on a page boundary, encrypting large buffers can cause a series of crypto operations divided by page. The runtime PM API is also called those many times. We call runtime_pm_get_sync only at beginning on the session (cra_init) and runtime_pm_put at the end. This result in upto a 50% speedup as below. This doesn't make the driver to keep the system awake as runtime get/put is only called during a crypto session which completes usually quickly. Before: root@beagleboard:~# time -v openssl speed -evp aes-128-cbc Doing aes-128-cbc for 3s on 16 size blocks: 13310 aes-128-cbc's in 0.01s Doing aes-128-cbc for 3s on 64 size blocks: 13040 aes-128-cbc's in 0.04s Doing aes-128-cbc for 3s on 256 size blocks: 9134 aes-128-cbc's in 0.03s Doing aes-128-cbc for 3s on 1024 size blocks: 8939 aes-128-cbc's in 0.01s Doing aes-128-cbc for 3s on 8192 size blocks: 4299 aes-128-cbc's in 0.00s After: root@beagleboard:~# time -v openssl speed -evp aes-128-cbc Doing aes-128-cbc for 3s on 16 size blocks: 18911 aes-128-cbc's in 0.02s Doing aes-128-cbc for 3s on 64 size blocks: 18878 aes-128-cbc's in 0.02s Doing aes-128-cbc for 3s on 256 size blocks: 11878 aes-128-cbc's in 0.10s Doing aes-128-cbc for 3s on 1024 size blocks: 11538 aes-128-cbc's in 0.05s Doing aes-128-cbc for 3s on 8192 size blocks: 4857 aes-128-cbc's in 0.03s While at it, also drop enter and exit pr_debugs, in related code. tracers can be used for that. Tested on a Beaglebone (AM335x SoC) board. Signed-off-by:
Joel A Fernandes <joelagnel@ti.com> Acked-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Herbert Xu authored
lib/crc-t10dif.c:42:1-3: WARNING: PTR_RET can be used Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR Generated by: coccinelle/api/ptr_ret.cocci Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
- 28 May, 2013 14 commits
-
-
Thomas Meyer authored
Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Jussi Kivilinna authored
Add sha224 implementation to sha256_ssse3 module. This also fixes sha256_ssse3 module autoloading issue when 'sha224' is used before 'sha256'. Previously in such case, just sha256_generic was loaded and not sha256_ssse3 (since it did not provide sha224). Now if 'sha256' was used after 'sha224' usage, sha256_ssse3 would remain unloaded. Cc: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Jussi Kivilinna authored
Add sha384 implementation to sha512_ssse3 module. This also fixes sha512_ssse3 module autoloading issue when 'sha384' is used before 'sha512'. Previously in such case, just sha512_generic was loaded and not sha512_ssse3 (since it did not provide sha384). Now if 'sha512' was used after 'sha384' usage, sha512_ssse3 would remain unloaded. For example, this happens with tcrypt testing module since it tests 'sha384' before 'sha512'. Cc: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Jussi Kivilinna authored
'sha512_generic' should set driver name now that there is alternative sha512 provider (sha512_ssse3). Signed-off-by:
-
Lars-Peter Clausen authored
free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: <smpl> @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) </smpl> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Tobias Rauter authored
This patch enables the DCP crypto functionality on imx28. Currently, only aes-128-cbc is supported. Moreover, the dcpboot misc-device, which is used by Freescale's SDK tools and uses a non-software-readable OTP-key, is added. Changes of v2: - ring buffer for hardware-descriptors - use of ablkcipher walk - OTP key encryption/decryption via misc-device (compatible to Freescale-SDK) - overall cleanup The DCP is also capable of sha1/sha256 but I won't be able to add that anytime soon. Tested with built-in runtime-self-test, tcrypt and openssl via cryptodev 1.6 on imx28-evk and a custom built imx28-board. Signed-off-by:
Tobias Rauter <tobias.rauter@gmail.com> Signed-off-by:
-
Andrei Varvara authored
Add Class Context SRC / DEST flags for the LOAD & STORE commands Signed-off-by:
Andrei Varvara <andrei.varvara@freescale.com> Reviewed-by:
Phillips Kim-R1AAHA <Kim.Phillips@freescale.com> Reviewed-by:
Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Signed-off-by:
-
Andrei Varvara authored
Add define for "Adjust Output Frame Length" in order to set the AOFL bit in the IPsec ESP Decapsulation PDB. Signed-off-by:
Anca-Jeanina Floarea <anca.floarea@freescale.com> Signed-off-by:
-
Andrei Varvara authored
add defines for: append load immediate command setting SEQ LIODN equal to the Non-SEQ LIODN for the job replace job descriptor command Signed-off-by: -
Andrei Varvara authored
Store command has options to overwrite the Job Desc, Shared Desc or the entire Descriptor in memory, using the address from which the Descriptor was fetched. Signed-off-by:
-
Andrei Varvara authored
added all supported math funtion on 8 byte boundary with immediate flag bit set automatically added MATH_SRC0_DPOVRD & MATH_SRC1_DPOVRD The function/defines above are needed for creating descriptors longer than 64 words Signed-off-by:
-
Andrei Varvara authored
Perform 32-bit left shift of DEST and concatenate with left 32 bits of SRC1. {DEST[31:0],SRC1[63:32]} Signed-off-by:Mihai Serb <mihai.serb@freescale.com> Reviewed-by:
-
Andrei Varvara authored
In case Store command is used with overwrite Shared Descriptor feature there is no need for pointer, it is using the address from which the Shared Descriptor was fetched. Signed-off-by:
-
Andrei Varvara authored
SEQ IN PTR command does not require pointer if RTO or PRE bit is set Updated desc_constr.h accordingly. Signed-off-by:
-
- 24 May, 2013 10 commits
-
-
Paul Bolle authored
The Kconfig symbol EXPERIMENTAL was removed in v3.9. So this dependency makes it impossible to set CRYPTO_DEV_SAHARA. It's unlikely that this is what is intended, so let's remove this dependency. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Laurent Navet authored
Replace calls to deprecated devm_request_and_ioremap by devm_ioremap_resource. Found with coccicheck and this semantic patch: scripts/coccinelle/api/devm_request_and_ioremap.cocci. Signed-off-by:
Laurent Navet <laurent.navet@gmail.com> Signed-off-by:
-
Tim Chen authored
These are simple tests to do sanity check of CRC T10 DIF hash. The correctness of the transform can be checked with the command modprobe tcrypt mode=47 The speed of the transform can be evaluated with the command modprobe tcrypt mode=320 Set the cpu frequency to constant and turn turbo off when running the speed test so the frequency governor will not tweak the frequency and affects the measurements. Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Tim Chen authored
Glue code that plugs the PCLMULQDQ accelerated CRC T10 DIF hash into the crypto framework. The config CRYPTO_CRCT10DIF_PCLMUL should be turned on to enable the feature. The crc_t10dif crypto library function will use this faster algorithm when crct10dif_pclmul module is loaded. Signed-off-by:
-
- 20 May, 2013 1 commit
-
-
Tim Chen authored
This is the x86_64 CRC T10 DIF transform accelerated with the PCLMULQDQ instructions. Details discussing the implementation can be found in the paper: "Fast CRC Computation for Generic Polynomials Using PCLMULQDQ Instruction" http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdfSigned-off-by:
-
