- 25 Oct, 2019 34 commits
-
-
Ajay Singh authored
During concurrent mode(AP/STA + P2P), pass the mgmt frames received from firmware to appropriate interface. Iterate the complete interface list to pass frames on the interface which has registered to receive mgmt frame. Added extra time for 'remain_on_ch' timer to ensure that timeout for uncanceled remain_on_channel is not triggered & 'p2p_listen_state' is not cleared before passing the mgmt frames to p2p interface. Signed-off-by:
Ajay Singh <ajay.kathat@microchip.com> Link: https://lore.kernel.org/r/20191018124511.22751-1-ajay.kathat@microchip.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
The "rates_len" value needs to be capped so that the memcpy() doesn't copy beyond the end of the array. Fixes: c5c77ba1 ("staging: wilc1000: Add SDIO/SPI 802.11 driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Adham Abozaeid <adham.abozaeid@microchip.com> Link: https://lore.kernel.org/r/20191017091832.GB31278@mwandaSigned-off-by:
-
Adham Abozaeid authored
In a fast disconnect/connect sequence, cfg80211_connect_result() can fail to find the bss object which the driver is connecting to. Detailed sequence of events: * Driver is connected in STA mode * Disconnect request arrives from user space. Driver disconnects and calls cfg80211_disconnected() which adds new event to the cfg80211_wq worker thread * Connect request arrives from user space. cfg80211_connect() stores ssid/ssid_len and calls rdev_connect() * __cfg80211_disconnected() runs in worker thread and zero wdev->ssid_len * Connect succeeds. Driver calls cfg80211_connect_result() which fails to find the bss because wdev->ssid_len is zero To overcome this, upon connect request, store the bss object in the driver and upon connect completion pass it to kernel using cfg80211_connect_bss(). Ref: bcdd49b0 ("store bss object and use cfg80211_connect_bss()") Signed-off-by:
-
Michael Straube authored
Remove code valid only for 5 GHz, according to the TODO. - find and remove remaining code valid only for 5 GHz. Most of the obvious ones have been removed, but things like channel > 14 still exist. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20191024155918.13399-1-straube.linux@gmail.comSigned-off-by:
-
Jamal Shareef authored
Fix duplicated arguments to bitwise & operator. Issue detected by coccinelle. Signed-off-by:
Jamal Shareef <jamal.k.shareef@gmail.com> Link: https://lore.kernel.org/r/20191023215105.18049-1-jamal.k.shareef@gmail.comSigned-off-by:
-
CristianeNaves authored
Fix lines ending with a '('. Issue found by checkpatch. Signed-off-by:CristianeNaves <cristianenavescardoso09@gmail.com> Link: https://lore.kernel.org/r/20191024134623.GA4506@cristiane-Inspiron-5420Signed-off-by:
-
Gabriela Bittencourt authored
Cleans up checks of "Alignment should match open parenthesis" in file sm750_cursor.h Signed-off-by:
Gabriela Bittencourt <gabrielabittencourt00@gmail.com> Link: https://lore.kernel.org/r/20191024163822.7157-4-gabrielabittencourt00@gmail.comSigned-off-by:
-
Gabriela Bittencourt authored
Cleans up checks of "Alignment should match open parenthesis" in file sm750_accel.h Signed-off-by:
-
Gabriela Bittencourt authored
Cleans up checks of "Alignment should match open parenthesis" in file ddk750_sii164.c Signed-off-by:
-
Gabriela Bittencourt authored
Formatting comments in file drivers/staging/sm750fb/sm750_accel.h. Signed-off-by:
-
Gabriela Bittencourt authored
Formatting comments in file drivers/staging/sm750fb/sm750_accel.c. Signed-off-by:
-
Jules Irenge authored
Fix warnings of Block comments use * on subsequent lines. Issue detected by checkpatch tool. Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Link: https://lore.kernel.org/r/20191017173837.27336-1-jbi.octave@gmail.comSigned-off-by:
-
Jules Irenge authored
Fix warnings of space required between operator and variables. Issue detected by checkpatch tool Signed-off-by:
-
Jules Irenge authored
Fix warnings of line over 80 characters. Issue detected by checkepatch tool. Signed-off-by:
-
Evan Chime authored
Change "standred" on line 3 to "standard" Signed-off-by:
Evan Chime <chime.evan.dri.devel@gmail.com> Link: https://lore.kernel.org/r/20191018175759.GA8294@ik-ubuntuSigned-off-by:
-
Evan Chime authored
Change "in to" in "Changing comments in to linux standred format" on line 3 to "into" Signed-off-by:
-
Jules Irenge authored
Fix warnings of comparision to bool. Issue detected by coccinelle tool. Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Link: https://lore.kernel.org/r/20191022185328.9387-1-jbi.octave@gmail.comSigned-off-by:
-
Jamal Shareef authored
Bool initializations should use true and false. Bool tests don't need comparisons. Based on contributions from Joe Perches, Rusty Russell and Bruce W Allan. The semantic patch that makes this report is available in scripts/coccinelle/misc/boolinit.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/Signed-off-by:
-
YueHaibing authored
drivers/staging/comedi/drivers/ni_routes.c:52:21: warning: route_table_size defined but not used [-Wunused-const-variable=] It is never used since introduction. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20191023075206.33088-1-yuehaibing@huawei.comSigned-off-by:
-
Valdis Kletnieks authored
Convert FFS_MEMORYERR to -ENOMEM Signed-off-by:
Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Link: https://lore.kernel.org/r/20191024155327.1095907-9-Valdis.Kletnieks@vt.eduSigned-off-by:
-
Valdis Kletnieks authored
Convert FFS_INVALIDPATH to -EINVAL Signed-off-by:
-
Valdis Kletnieks authored
Convert FFS_FILEEXIST to -EEXIST Signed-off-by:
-
Valdis Kletnieks authored
Convert FFS_NOTNAMETOOLONG to -ENAMETOOLONG Signed-off-by:
-
Valdis Kletnieks authored
Convert FFS_PERMISSIONERR to -EPERM Signed-off-by:
-
Valdis Kletnieks authored
Convert FFS_DIRBUSY to -EBUSY Signed-off-by:
-
Valdis Kletnieks authored
Convert FFS_NOTFOUND to -ENOENT Signed-off-by:
-
Valdis Kletnieks authored
Start cleaning up the odd scheme of return codes, starting with FFS_FULL Signed-off-by:
-
Sudip Mukherjee authored
The build of xtensa allmodconfig gives warning of: In function 'cfg80211_rtw_scan': warning: the frame size of 1040 bytes is larger than 1024 bytes Allocate memory for ssid dynamically to reduce the stack usage, as an added benifit we can remove the memset by using kzalloc while allocating memory. Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191018101854.31876-1-sudipm.mukherjee@gmail.comSigned-off-by:
-
Sudip Mukherjee authored
The build of xtensa allmodconfig gives warning of: In function 'rtw_cfg80211_unlink_bss': warning: the frame size of 1136 bytes is larger than 1024 bytes Instead of having 'select_network' structure as a variable use it as a pointer. Signed-off-by:
-
Aliasgar Surti authored
There is use of if..elseif..else condition which has same logic in all three blocks. Removed if..else block and placed log message instead that. Signed-off-by:
Aliasgar Surti <aliasgar.surti500@gmail.com> Reviewed-by:
-
Alexandru Ardelean authored
The `rtl8188eu` driver is built as a kmod in order to avoid symbol conflicts (at link-time) with other Realtek drivers. Internally, we use this driver as builtin [vs kmod], and we've identified the `efuse_power_switch()` symbol to be conflicting at link-time with the one from the `rtlwifi` driver. An alternative solution would have been to rename the function, but it doesn't look like it's being used outside of this driver, so just make it static. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20191016065834.12186-1-alexandru.ardelean@analog.comSigned-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
-
- 15 Oct, 2019 6 commits
-
-
Jamal Shareef authored
Fix lines over 80 character warnings. Issue found by checkpatch. Signed-off-by:
-
Michael Straube authored
Remove blank lines to reduce whitespace and improve readability. Signed-off-by:
-
Michael Straube authored
Convert the local variables max_ampdu_len and min_mpdu_spacing from unsigned char to u8 and remove unnecessary castings to u8 pointer. Signed-off-by:
-
Michael Straube authored
Rename local variables to avoid mixed case. max_AMPDU_len -> max_ampdu_len min_MPDU_spacing -> min_mpdu_spacing Signed-off-by:
-
Wambui Karuga authored
Add cast to fix the following sparse warning: warning: restricted __be16 degrades to integer Signed-off-by:
Wambui Karuga <wambui.karugax@gmail.com> Link: https://lore.kernel.org/r/20191015084731.8514-1-wambui.karugax@gmail.comSigned-off-by:
-
Wambui Karuga authored
Remove unnecessary casts in pointer types passed to kfree. Signed-off-by:
-
