An error occurred fetching the project authors.
- 18 Oct, 2018 8 commits
-
-
Christoph Hellwig authored
We can't just transfer ownership to the CPU and then unmap, as this will break with swiotlb. Instead unmap the command and sense buffer a little earlier in the I/O completion handler and get rid of the pci_dma_sync_sg_for_cpu call entirely. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Christoph Hellwig authored
Remove the list wrappers, including the pointless list iteration before deletion. Signed-off-by:
-
Hannes Reinecke authored
This patch adds support for the Mylex DAC960 RAID controller, supporting the newer, SCSI-based interface. The driver is a re-implementation of the original DAC960 driver. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Hannes Reinecke authored
This patch adds support for the Mylex DAC960 RAID controller, supporting the older, block-based interface only. The driver is a re-implementation of the original DAC960 driver. Signed-off-by:
-
YueHaibing authored
drivers/scsi/advansys.c: In function 'adv_isr_callback': drivers/scsi/advansys.c:5952:6: warning: variable 'srb_tag' set but not used [-Wunused-but-set-variable] It never used since introduction in commit 9c17c62a ("advansys: use shared host tag map for command lookup") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Laurence Oberman authored
This message floods the log when enabling mask 0x7 for /proc/sys/dev/scsi/logging_level: xxxxxxxx kernel: scsi_block_when_processing_errors: rtn: 1 It's not needed and makes tracing just scsi_eh* messages way too verbose so get rid of it. [mkp: mangled patch, applied by hand] Signed-off-by:
Laurence Oberman <loberman@redhat.com> Reviewed-by:
Chad Dupuis <chad.dupuis@cavium.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Bryant G. Ly authored
There is currently a bug with the driver where there is never a call to target_sess_cmd_list_set_waiting(), it only called target_wait_for_sess_cmd(), which basically means that the sess_wait_list would always be empty. Thus, list_empty(&sess->sess_wait_list) = true, (eg: no se_cmd I/O is quiesced, because no se_cmd in sess_wait_list), since commit 712db3eb ("scsi: ibmvscsis: Properly deregister target sessions") in 4.9.y code. ibmvscsi_tgt does not remove the I_T Nexus when a VM is active so we can fix this issue by removing the call to target_wait_for_sess_cmd() altogether. Signed-off-by:
Bryant G. Ly <bly@catalogicsoftware.com> Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
Evan Green authored
With commit 10e5e375 ("scsi: ufs: Add clock ungating to a separate workqueue"), clock gating work was moved to a separate work queue with WQ_MEM_RECLAIM set, since clock gating could occur from a memory reclaim context. Unfortunately, clk_gating.gate_work was left queued via schedule_delayed_work, which is a system workqueue that does not have WQ_MEM_RECLAIM set. Because ufshcd_ungate_work attempts to cancel gate_work, the following warning appears: [ 14.174170] workqueue: WQ_MEM_RECLAIM ufs_clk_gating_0:ufshcd_ungate_work is flushing !WQ_MEM_RECLAIM events:ufshcd_gate_work [ 14.174179] WARNING: CPU: 4 PID: 173 at kernel/workqueue.c:2440 check_flush_dependency+0x110/0x118 [ 14.205725] CPU: 4 PID: 173 Comm: kworker/u16:3 Not tainted 4.14.68 #1 [ 14.212437] Hardware name: Google Cheza (rev1) (DT) [ 14.217459] Workqueue: ufs_clk_gating_0 ufshcd_ungate_work [ 14.223107] task: ffffffc0f6a40080 task.stack: ffffff800a490000 [ 14.229195] PC is at check_flush_dependency+0x110/0x118 [ 14.234569] LR is at check_flush_dependency+0x110/0x118 [ 14.239944] pc : [<ffffff80080cad14>] lr : [<ffffff80080cad14>] pstate: 60c001c9 [ 14.333050] Call trace: [ 14.427767] [<ffffff80080cad14>] check_flush_dependency+0x110/0x118 [ 14.434219] [<ffffff80080cafec>] start_flush_work+0xac/0x1fc [ 14.440046] [<ffffff80080caeec>] flush_work+0x40/0x94 [ 14.445246] [<ffffff80080cb288>] __cancel_work_timer+0x11c/0x1b8 [ 14.451433] [<ffffff80080cb4b8>] cancel_delayed_work_sync+0x20/0x30 [ 14.457886] [<ffffff80085b9294>] ufshcd_ungate_work+0x24/0xd0 [ 14.463800] [<ffffff80080cfb04>] process_one_work+0x32c/0x690 [ 14.469713] [<ffffff80080d0154>] worker_thread+0x218/0x338 [ 14.475361] [<ffffff80080d527c>] kthread+0x120/0x130 [ 14.480470] [<ffffff8008084814>] ret_from_fork+0x10/0x18 The simple solution is to put the gate_work on the same WQ_MEM_RECLAIM work queue as the ungate_work. Fixes: 10e5e375 ("scsi: ufs: Add clock ungating to a separate workqueue") Signed-off-by:
Evan Green <evgreen@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
- 17 Oct, 2018 9 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/lpfc/lpfc_debugfs.c: In function 'lpfc_debugfs_nodelist_data': drivers/scsi/lpfc/lpfc_debugfs.c:553:29: warning: variable 'tgtp' set but not used [-Wunused-but-set-variable] It never used since 2b65e182 ("scsi: lpfc: NVME Target: Add debugfs support") Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114988 ("Missing break in switch") Addresses-Coverity-ID: 114989 ("Missing break in switch") Addresses-Coverity-ID: 114990 ("Missing break in switch") Addresses-Coverity-ID: 114991 ("Missing break in switch") Addresses-Coverity-ID: 114992 ("Missing break in switch") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from enumeration type 'enum iscsi_host_param' to different enumeration type 'enum iscsi_param' [-Wenum-conversion] &addr, param, buf); ^~~~~ 1 warning generated. iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine so add an explicit cast to iscsi_param to make it clear to Clang that this is expected behavior. Link: https://github.com/ClangBuiltLinux/linux/issues/153Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/lpfc/lpfc_hbadisc.c: In function 'lpfc_free_tx': drivers/scsi/lpfc/lpfc_hbadisc.c:5431:19: warning: variable 'psli' set but not used [-Wunused-but-set-variable] Since commit 895427bd ("scsi: lpfc: NVME Initiator: Base modifications") 'psli' is not used any more. Signed-off-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/scsi/bfa/bfa_fcs_lport.c:379:26: warning: implicit conversion from enumeration type 'enum bfa_lport_aen_event' to different enumeration type 'enum bfa_ioc_aen_event' [-Wenum-conversion] BFA_AEN_CAT_LPORT, event); ^~~~~ The root cause of these warnings is the bfad_im_post_vendor_event function, which expects a value from enum bfa_ioc_aen_event but there are multiple instances of values from enums bfa_port_aen_event, bfa_audit_aen_event, and bfa_lport_aen_event being used in this function. Given that this doesn't appear to be a problem since cat helps with differentiating the events, just change evt's type to int so that no conversion needs to happen and Clang won't warn. Update aen_type's type in bfa_aen_entry_s as members that hold enumerated types should be int. Link: https://github.com/ClangBuiltLinux/linux/issues/147Signed-off-by: -
Nathan Chancellor authored
Clang warns when an enumerated type is implicitly converted to another. drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from enumeration type 'enum sci_task_status' to different enumeration type 'enum sci_status' [-Wenum-conversion] status = sci_controller_start_task(ihost, ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from enumeration type 'enum sci_status' to different enumeration type 'enum sci_task_status' [-Wenum-conversion] return SCI_SUCCESS; ~~~~~~ ^~~~~~~~~~~ drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from enumeration type 'enum sci_status' to different enumeration type 'enum sci_task_status' [-Wenum-conversion] return status; ~~~~~~ ^~~~~~ Avoid all of these implicit conversion by just making sci_controller_start_task use sci_status. This silences Clang and has no functional change since sci_task_status has all of its values mapped to something in sci_status. Link: https://github.com/ClangBuiltLinux/linux/issues/153Signed-off-by: -
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from enumeration type 'enum sci_io_status' to different enumeration type 'enum sci_status' [-Wenum-conversion] status = SCI_IO_FAILURE_RESPONSE_VALID; ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from enumeration type 'enum sci_io_status' to different enumeration type 'enum sci_status' [-Wenum-conversion] status = SCI_IO_FAILURE_RESPONSE_VALID; ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h file. Link: https://github.com/ClangBuiltLinux/linux/issues/153Signed-off-by: -
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_sli4_sp_handle_rcqe': drivers/scsi/lpfc/lpfc_sli.c:13430:26: warning: variable 'fc_hdr' set but not used [-Wunused-but-set-variable] drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_cq_create': drivers/scsi/lpfc/lpfc_sli.c:14852:11: warning: variable 'hw_page_size' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Varun Prakash authored
Add IEEE and CEE DCBX support for iSCSI connections. Signed-off-by:
Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
- 16 Oct, 2018 23 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_reset_handler': drivers/scsi/megaraid/megaraid_mbox.c:2580:7: warning: variable 'recovering' set but not used [-Wunused-but-set-variable] drivers/scsi/megaraid/megaraid_mbox.c: In function 'mbox_post_sync_cmd': drivers/scsi/megaraid/megaraid_mbox.c:2728:12: warning: variable 'mbox64' set but not used [-Wunused-but-set-variable] drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_mbox_support_random_del': drivers/scsi/megaraid/megaraid_mbox.c:3138:11: warning: variable 'mbox' set but not used [-Wunused-but-set-variable] drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_mbox_flush_cache': drivers/scsi/megaraid/megaraid_mbox.c:3266:10: warning: variable 'mbox' set but not used [-Wunused-but-set-variable] drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_mbox_fire_sync_cmd': drivers/scsi/megaraid/megaraid_mbox.c:3302:12: warning: variable 'mbox64' set but not used [-Wunused-but-set-variable] drivers/scsi/megaraid/megaraid_mbox.c: In function 'gather_hbainfo': drivers/scsi/megaraid/megaraid_mbox.c:3797:10: warning: variable 'dmajor' set but not used [-Wunused-but-set-variable] [mkp: applied by hand due to conflict with hch's DMA cleanup] Signed-off-by:
-
Nathan Chancellor authored
Clang generates a warning when it sees a logical not followed by a conditional operator like ==, >, or < because it thinks that the logical not should be applied to the whole statement: drivers/scsi/qla2xxx/qla_nx.c:3702:7: warning: logical not is only applied to the left hand side of this comparison [-Wlogical-not-parentheses] if (!qla2x00_eh_wait_for_pending_commands(vha, 0, 0, ^ drivers/scsi/qla2xxx/qla_nx.c:3702:7: note: add parentheses after the '!' to evaluate the comparison first if (!qla2x00_eh_wait_for_pending_commands(vha, 0, 0, ^ ( drivers/scsi/qla2xxx/qla_nx.c:3702:7: note: add parentheses around left hand side expression to silence this warning if (!qla2x00_eh_wait_for_pending_commands(vha, 0, 0, ^ ( 1 warning generated. It assumes the author might have made a mistake in their logic: if (!a == b) -> if (!(a == b)) Sometimes that is the case; other times, it's just a super convoluted way of saying 'if (a)' when b = 0: if (!1 == 0) -> if (0 == 0) -> if (true) Alternatively: if (!1 == 0) -> if (!!1) -> if (1) Simplify this comparison so that Clang doesn't complain. Link: https://github.com/ClangBuiltLinux/linux/issues/80Signed-off-by: -
Nathan Chancellor authored
Clang warns when a variable is assigned to itself. drivers/scsi/bfa/bfa_fcbuild.c:199:6: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] len = len; ~~~ ^ ~~~ drivers/scsi/bfa/bfa_fcbuild.c:838:6: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] len = len; ~~~ ^ ~~~ drivers/scsi/bfa/bfa_fcbuild.c:917:6: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] len = len; ~~~ ^ ~~~ drivers/scsi/bfa/bfa_fcbuild.c:981:6: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] len = len; ~~~ ^ ~~~ drivers/scsi/bfa/bfa_fcbuild.c:1008:6: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] len = len; ~~~ ^ ~~~ 5 warnings generated. This construct is usually used to avoid unused variable warnings, which I assume is the case here. -Wunused-parameter is hidden behind -Wextra with GCC 4.6, which is the minimum version to compile the kernel as of commit cafa0010 ("Raise the minimum required gcc version to 4.6"). However, upon further inspection, these functions aren't actually used anywhere; they're just defined. Rather than just removing the self assignments, remove all of this dead code. Link: https://github.com/ClangBuiltLinux/linux/issues/148Signed-off-by: -
Nathan Chancellor authored
Clang warns when a variable is assigned to itself. drivers/scsi/qla2xxx/qla_mbx.c:1514:4: warning: explicitly assigning value of variable of type 'uint64_t' (aka 'unsigned long long') to itself [-Wself-assign] l = l; ~ ^ ~ 1 warning generated. This construct is usually used to avoid unused variable warnings, which I assume is the case here. -Wunused-parameter is hidden behind -Wextra with GCC 4.6, which is the minimum version to compile the kernel as of commit cafa0010 ("Raise the minimum required gcc version to 4.6"). Just remove this line to silence Clang. Link: https://github.com/ClangBuiltLinux/linux/issues/83Signed-off-by: -
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/arcmsr/arcmsr_hba.c: In function 'arcmsr_drain_donequeue': drivers/scsi/arcmsr/arcmsr_hba.c:1320:10: warning: variable 'lun' set but not used [-Wunused-but-set-variable] drivers/scsi/arcmsr/arcmsr_hba.c:1320:6: warning: variable 'id' set but not used [-Wunused-but-set-variable] Never used since introduction in commit ae52e7f0 ("arcmsr: Support 1024 scatter-gather list entries and improve AP while FW trapped and behaviors of EHs"). Signed-off-by:
-
Wenwen Wang authored
In megasas_mgmt_compat_ioctl_fw(), to handle the structure compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket 'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle the packet. Since the two data structures have different fields, the data is copied from 'cioc' to 'ioc' field by field. In the copy process, 'sense_ptr' is prepared if the field 'sense_len' is not null, because it will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and saved to kernel-space variables 'local_sense_off' and 'user_sense_off' respectively. Given that 'ioc->sense_off' is also copied from 'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the same value. However, 'cioc' is in the user space and a malicious user can race to change the value of 'cioc->sense_off' after it is copied to 'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing so, the attacker can inject different values into 'local_sense_off' and 'user_sense_off'. This can cause undefined behavior in the following execution, because the two variables are supposed to be same. This patch enforces a check on the two kernel variables 'local_sense_off' and 'user_sense_off' to make sure they are the same after the copy. In case they are not, an error code EINVAL will be returned. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in beiscsi_log message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in lpfc_printf_log message text. Signed-off-by:
-
John Garry authored
Currently a spin_unlock_irqrestore() call is missing on the error path, so add it. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Jens Axboe authored
We just need to free the request here. Additionally, this is currently wrong for a queue that's using MQ currently, it'll crash. Cc: Doug Gilbert <dgilbert@interlog.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
Jens Axboe <axboe@kernel.dk> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Jens Axboe authored
This is currently wrong since it isn't dependent on if we're using mq or not. At least now it'll be correct when we force mq. Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
Add missing break statement in order to prevent the code from falling through to case TEST_UNIT_READY. Addresses-Coverity-ID: 1357338 ("Missing break in switch") Suggested-by: -
Bart Van Assche authored
COMPARE AND WRITE command execution starts with a call of sbc_compare_and_write(). That function locks the caw_sem member in the backend device data structure and submits a read request to the backend driver. Upon successful completion of the read compare_and_write_callback() gets called. That last function compares the data that has been read. If it matches transport_complete_callback is set to compare_and_write_post and a write request is submitted. compare_and_write_post() submits a write request to the backend driver. XDWRITEREAD command execution starts with sbc_execute_rw() submitting a read to the backend device. Upon successful completion of the read the xdreadwrite_callback() gets called. That function xors the data that has been read with the data in the data-out buffer and stores the result in the data-in buffer. Call transport_complete_callback() not only if COMPARE AND WRITE fails but also if XDWRITEREAD fails. This makes the code more systematic. Make sure that the callback functions handle (cmd, false, NULL) argument triples fine. Reviewed-by:
Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
The purpose of sg_alloc_table() is to allocate and initialize an sg-list. Use that function instead of open-coding it. This patch will make it easier to share code for caching sg-list allocations between the SCSI and NVMe target cores. Signed-off-by:
-
Bart Van Assche authored
Instead of duplicating the SECTOR_SHIFT definition from <linux/blkdev.h>, use it. This patch does not change any functionality. Reviewed-by:
-
Bart Van Assche authored
Commit 057085e5 ("target: Fix race for SCF_COMPARE_AND_WRITE_POST checking") removed the code that checks the SCF_COMPARE_AND_WRITE_POST flag. Hence also remove the flag itself. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Bart Van Assche authored
A value is assigned to the xcopy_op member of struct xcopy_pt_cmd but that value is never used. Hence remove the xcopy_op member. Reviewed-by:
-
Bart Van Assche authored
Change one occurrence of "aleady" into "already" and one occurrence of "is" into "if". Reviewed-by:
-
David Disseldorp authored
sess_err_stats are currently filled on NOP ping timeout, but not Data-Out timeout. Stash details of Data-Out timeouts using a ISCSI_SESS_ERR_CXN_TIMEOUT value for last_sess_failure_type. Signed-off-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
-
David Disseldorp authored
Replace existing nested code blocks with helper function calls. Signed-off-by:
-
David Disseldorp authored
Events resulting in connection outages like this should be logged as errors. Include the I_T Nexus in the message to aid path identification. Signed-off-by:
-
David Disseldorp authored
Data-Out timeouts resulting in connection outages should be logged as errors. Include the I_T Nexus in the message to aid path identification. Signed-off-by:
-
David Disseldorp authored
Move the ISCSI_IQN_LEN definition up, so that it can be used in more places instead of a hardcoded value. Signed-off-by:
-
