- 20 Mar, 2012 27 commits
-
-
Joonyoung Shim authored
We should release pending pageflip events when closed. If not, they will be dangling events. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Inki Dae authored
this function would be used for drm based 2d acceleration driver to get/put dma address through gem handle. when exynos_drm_get_dma_address is called reference count of gem object would be increased not to be released by gem close and when exynos_drm_put_dma_address is called the reference count of this gem object would be decreased to be released. Signed-off-by:
-
Inki Dae authored
with this patch, we can allocate physically continuous or non-continuous memory and also it creates scatterlist for iommu support so allocated memory region can be mapped to iommu page table using scatterlist. Signed-off-by:
-
Inki Dae authored
this patch adds mode_fixup feature for hdmi module that specific driver changes current mode to driver desired mode properly. Signed-off-by:
-
Joonyoung Shim authored
Later Exynos series from Exynos4X12 support HDMI version 1.4. We will distinguish to use which version via platform data. This patch supports only default features of HDMI version 1.4(The 3D, sound and etc don't support yet) Signed-off-by:
-
Joonyoung Shim authored
The contents of exynos_mixer.h are used only in exynos_mixer.c, so separated header is unnecessary. Signed-off-by:
-
Yoichi Yuasa authored
It cannot map correctly if page fault begins from a intermediate address. [The driver prefaults the mapping, so we need to work from the correct base address not the faulting address otherwise the map appears offset by the fault offset] Signed-off-by:
Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by:
Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-2012-03-01' of git://people.freedesktop.org/~danvet/drm-intel into drm-next * tag 'drm-intel-next-2012-03-01' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Only clear the GPU domains upon a successful finish drm/i915: reenable gmbus on gen3+ again drm/i915: i2c: unconditionally set up gpio fallback drm/i915: merge gmbus and gpio i2c adpater into one drm/i915: merge struct intel_gpio into struct intel_gmbus i2c: export bit-banging algo functions drm/nouveau: do a better job at hiding the NIH i2c bit-banging algo drm/i915: add dev_priv to intel_gmbus drm/i915: Fix single msg gmbus_xfers writes drm/i915: error_buffer->ring should be signed drm/i915: Silence the error message from i915_wait_request() drm/i915: use the new hdmi_force_audio enum more drm/i915: No need to search again after retiring requests drm/i915: Only bump refcnt on objects scheduled for eviction drm/i915/bios: Downgrade the "signature missing" DRM_ERROR to debug drm/i915: Ignore LVDS on hp t5745 and hp st5747 thin client drm/i915: Fixes distorted external screen image on HP 2730p
-
Michel Dänzer authored
Only radeon_gem_object_unpin was used anymore, in only one place. Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Michel Dänzer authored
The hardware only takes 27 bits for the offset, so larger offsets are truncated, and the display shows random bits other than the intended ones. Signed-off-by:
-
Michel Dänzer authored
The hardware only takes 27 bits for the offset, so larger offsets are truncated, and the hardware cursor shows random bits other than the intended ones. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46796 Cc: stable@vger.kernel.org Signed-off-by:
-
Tvrtko Ursulin authored
On a system with one HDMI and one VGA connector the latter causes output polling to run every ten seconds. This causes full EDID re-fetch on every poll and approx. 100ms rendering stalls are experienced by full screen page-flipping applications. Optimisation is to trust HPD sense on R600+ ASICs and to skip doing these expensive probes unless HPD sense has changed. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=47007 agd5f: fix patch and message formatting. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by:
-
Alex Deucher authored
vbios lists DVI-I port as VGA and DVI-D. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=47007Signed-off-by:
-
Alex Deucher authored
We digital encoders have a detect function as well (for DP to VGA bridges), so we make sure we choose the analog one here. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=47007Signed-off-by:
-
Joe Perches authored
Use the more current logging style. Add pr_fmt and remove the TTM_PFX uses. Coalesce formats and align arguments. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Julia Lawall authored
Most of the error handling code in this function frees the buffers kcmd_addr, kvb_addr, and kbox_addr allocated at the beginning of this function. These two branches are changed to do the same. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
The function radeon_cs_parser_init is only called from two places, in drivers/gpu/drm/radeon/radeon_cs.c and drivers/gpu/drm/radeon/r600_cs.c. In each case, if the call fails another function is called that frees all of the kdata and dpage information in the chunks array. So this information should not be freed in radeon_cs_parser_init as well. Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Dave Airlie authored
DisplayPort spec v1.1a, Table 2-52. Same commit to Intel by ajax in 9962c925Reviewed-by:
-
Marek Olšák authored
Signed-off-by:
Marek Olšák <maraeo@gmail.com> Reviewed-by:
-
Marek Olšák authored
Signed-off-by:
-
Marek Olšák authored
and document the other unused ones. Signed-off-by:
-
Marek Olšák authored
Signed-off-by:
-
Marek Olšák authored
Signed-off-by:
-
Marek Olšák authored
There are also two fixes: - In DRAW_INDEX_2, we read idx_value, but should have read idx+1. - When correcting SQ_VTX_CONSTANT_WORD1_0.SIZE, we should subtract the offset. Signed-off-by:
-
Marek Olšák authored
Signed-off-by:
-
Marek Olšák authored
Signed-off-by:
-
Dave Airlie authored
In order to satisfy all the various Kconfig options between USB and DRM, we need to split the USB code out into a separate module and export symbols to it. This fixes build problems in -next reported by sfr. Signed-off-by:
-
- 16 Mar, 2012 1 commit
-
-
Dave Airlie authored
reported by sfr on -next merge. Signed-off-by:
-
- 15 Mar, 2012 12 commits
-
-
Dave Airlie authored
This is an initial drm/kms driver for the displaylink devices. Supports fb_defio, supports KMS dumb interface supports 24bpp via conversion to 16bpp, hw can do this better. supports hot unplug using new drm core features. On an unplug, it disables connector polling, unplugs connectors from sysfs, unplugs fbdev layer (using Kay's API), drops all the USB device URBs, and call the drm core to unplug the device. This driver is based in large parts on udlfb.c so I've licensed it under GPLv2. Signed-off-by: -
Dave Airlie authored
Two parts to this, one is simple unplug from sysfs for the device node. The second adds an unplugged state, if we have device opens, we just set the unplugged state and return, if we have no device opens we drop the drm device. If after a lastclose we discover we are unplugged we then drop the drm device. v2: use an atomic for unplugged and wrap it for users, add checks on open + mmap + ioctl entry points. Signed-off-by: -
Dave Airlie authored
In order to get correct ordering at hot-unplug for userspace, we need to tear down all the sysfs bits at the correct time. This adds a helper to allow drivers to remove the sysfs nodes for all connectors. Signed-off-by: -
Dave Airlie authored
a step towards correct hot unplug for USB devices, we need to remove the userspace facing bits at the unplug time for correct udev operation. Signed-off-by: -
Kay Sievers authored
The USB graphics card driver delays the unregistering of the framebuffer device to a workqueue, which breaks the userspace visible remove uevent sequence. Recent userspace tools started to support USB graphics card hotplug out-of-the-box and rely on proper events sent by the kernel. The framebuffer device is a direct child of the USB interface which is removed immediately after the USB .disconnect() callback. But the fb device in /sys stays around until its final cleanup, at a time where all the parent devices have been removed already. To work around that, we remove the sysfs fb device directly in the USB .disconnect() callback and leave only the cleanup of the internal fb data to the delayed work. Before: add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb) add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb) add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb0 (graphics) remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb) remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb) remove /2-1.2:1.0/graphics/fb0 (graphics) After: add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb) add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb) add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics) remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics) remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb) remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb) Cc: stable@vger.kernel.org Tested-by:
Bernie Thompson <bernie@plugable.com> Acked-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Dave Airlie authored
Merge the fixes so far into core-next, needed to test intel driver. Conflicts: drivers/gpu/drm/i915/intel_ringbuffer.c
-
Ville Syrjälä authored
Add a helper function to copy a display mode. Use it in drm_mode_duplicate() and nouveau mode_fixup hooks. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
The blob property data is always allocated immediately after the object header. No need for the extra indirection when accessing it, just use a flexible array member. Signed-off-by:
-
Ville Syrjälä authored
Check drm_mode_object_get() return value everywhere. Signed-off-by:
-
Ville Syrjälä authored
drm_crtc_convert_umode() and drm_crtc_convert_to_umode() are never used outside drm_crtc.c, so make them static. Also make the input mode structure const for both functions. Signed-off-by:
-
Ville Syrjälä authored
Change drm_mode_attachmode_crtc() to take an "all or nothing" approach. If an error is returned, there are no side effects visible. Also change the function to always duplicate the mode passed in. Also change the function to not give up when it finds the first connector without and encoder. A simpler approach would be to just remove the function completely as it's unused currently. Signed-off-by:
-
Ville Syrjälä authored
Make sure the requested CRTC viewport fits inside the framebuffer. Signed-off-by:
-
