- 04 Jul, 2004 2 commits
-
-
Jeff Garzik authored
For non-BK users, this is similar to .cvsignore.
-
Jeff Garzik authored
These are generated from drivers/video/logo/*.ppm. For non-BK users, this is the same as .cvsignore.
-
- 03 Jul, 2004 24 commits
-
-
Paul Jackson authored
The remainder of the const qualifiers on cpumask ops. My cpumask overhaul missed specifying the const qualifiers in cpumask.h. Subsequently, Linus has added some. The following should provide the remainder of them. It also fixes one src vs dst variable misnaming. Using crosstool on 2.6.7-mm5, I have built the following arch's with the following change included: alpha ia64 powerpc-405 powerpc-750 sparc sparc64 x86_64 Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
bk://bk.arm.linux.org.uk/linux-2.6-serialLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Andrew Morton authored
arch/i386/kernel/apm.c: In function `suspend': arch/i386/kernel/apm.c:1221: warning: implicit declaration of function `save_processor_state' arch/i386/kernel/apm.c:1223: warning: implicit declaration of function `restore_processor_state' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
s/2.5/2.6/ in MAINTAINERS Signed-off-by: Adrian Bunk <bunk@fs.tum.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paul King authored
Add devfs support to telephony devices. Only tested with a single telephony device. Devices name phone/<minor>. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
James Bottomley authored
This new function fails to build on sparc64 due to nasty include dependencies. Fix that by uninlining it - it was too big for inlining anyway. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Found by the Stanford locking checker Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Found by the Stanford locking checker Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Found by the Stanford locking checker. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Fix deadlock identified by the Stanford locking checker. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Lamely fix a straightforward deadlock in sb_audio.c. Founf by the Stanford locking checker. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Fix deadlock identified by the Stanford locking checker. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Found by the new Stanford locking checker. Minimal fix for a deadlock in sysvfs: get_branch() can take read_lock(&pointers_lock), but one caller already has a write_lock. Perhaps some of the "oh we raced, drop everything and try again" logic in there can go away now, but this is enugh to fix the obvious deadlock. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Antonino Daplas authored
I did some simple benchmarking (time cat linux-2.6.7-mm5/MAINTAINERS) between 2.4 and 2.6 and I am not satisfied with what I see (It's claimed that fbdev-2.6 is faster than 2.4). The reason for the claim: 2.4 putcs - draw small amounts of data a lot of times 2.6 putcs - draw larger amounts of data a fewer times The way characters are drawn in 2.6 is optimal for accelerated drivers but should also give a speed boost for drivers that rely on software drawing. However the penaly incurred when preparing a large bitmap from a number of small bitmaps is currently very high. This is because of the following reasons: 1 fb_move_buf_{aligned|unaligned} uses pixmap->{out|in}buf. This is very expensive since outbuf and inbuf methods process only a byte or 2 of data at a time. 2 fb_sys_outbuf (the default method for pixmap->outbuf) uses memcpy(). Not a good choice if moving only a few bytes. 3 fb_move_buf_unaligned (used for fonts such as 12x22) also involves a lot of bit operations + a lot of calls to outbuf/inbuf which proportionately increases the penaly. So, I thought of separating fb_move_buf_* to fb_iomove_buf_* and fb_sysmove_buf_*. fb_iomove_buf_* - used if drivers specified outbuf and inbuf methods fb_sysmove_buf_* - used if drivers have no outbuf or inbuf methods *Most, if not all drivers fall in the second category. Below is a table that show differences between 2.4, 2.6 and 2.6 + abovementioned changes. To reduce the effect of panning and fillrect/copyarea, the scrollmode is forced to redraw. ================================================================= Test Hardware: P4 2G nVidia GeForce2 MX 64 Scrollmode: redraw time cat linux-2.6.7-mm5/MAINTAINERS 1024x768-8 1024x768-16 1024x768-32 ================================================================= 8x16 noaccel (2.4) real 0m5.490s real 0m8.535s real 0m15.388s user 0m0.001s user 0m0.000s user 0m0.001s sys 0m5.487s sys 0m8.535s sys 0m15.386s 8x16 noaccel (2.6) real 0m5.166s real 0m7.195s real 0m12.177s user 0m0.001s user 0m0.000s user 0m0.000s sys 0m5.164s sys 0m7.192s sys 0m12.176s 8x16 noaccel+patch (2.6) real 0m3.474s real 0m5.496s real 0m10.460s user 0m0.001s user 0m0.001s user 0m0.001s sys 0m5.492s sys 0m5.492s sys 0m10.454s ================================================================= 8x16 accel (2.4) real 0m4.368s real 0m9.420s real 0m22.415s user 0m0.001s user 0m0.001s user 0m0.001s sys 0m4.019s sys 0m9.384s sys 0m22.312s 8x16 accel (2.6) real 0m4.296s real 0m4.339s real 0m4.391s user 0m0.001s user 0m0.001s user 0m0.000s sys 0m4.280s sys 0m4.336s sys 0m4.389s 8x16 accel+patch (2.6) real 0m2.536s real 0m2.649s real 0m2.799s user 0m0.000s user 0m0.000s user 0m0.001s sys 0m2.536s sys 0m2.645s sys 0m2.798s ================================================================= 1024x768-8 1024x768-16 1024x768-32 ================================================================= 12x22 noaccel (2.4) real 0m7.883s real 0m12.175s real 0m21.134s user 0m0.000s user 0m0.000s user 0m0.001s sys 0m7.882s sys 0m12.174s sys 0m21.129s 12x22 noaccel (2.6) real 0m10.651s real 0m13.550s real 0m21.009s user 0m0.001s user 0m0.001s user 0m0.000s sys 0m10.617s sys 0m13.545s sys 0m21.008s 12x22 noaccel+patch (2.6) real 0m4.794s real 0m7.718s real 0m15.173s user 0m0.002s user 0m0.001s user 0m0.000s sys 0m4.792s sys 0m7.715s sys 0m15.170s ================================================================= 12x22 accel (2.4) real 0m3.971s real 0m9.030s real 0m21.711s user 0m0.000s user 0m0.000s user 0m0.000s sys 0m3.950s sys 0m8.983s sys 0m21.602s 12x22 accel (2.6) real 0m9.392s real 0m9.486s real 0m9.508s user 0m0.000s user 0m0.000s user 0m0.001s sys 0m9.392s sys 0m9.484s sys 0m9.484s 12x22 accel+patch (2.6) real 0m3.570s real 0m3.603s real 0m3.848s user 0m0.001s user 0m0.000s user 0m0.000s sys 0m3.567s sys 0m3.600s sys 0m3.844s ================================================================= Summary: 1 2.6 unaccelerated is a bit faster than 2.4 when handling 8x16 fonts, with a higher speed differential at high color depths. 2 2.4 unaccelerated is a bit faster than 2.6 when handling 12x22 fonts, with a smaller speed difference at high color depths (2.6 is actually a bit faster than 2.4 at 32bpp). 3 2.4 rivafb accelerated suffers at high color depths, even becoming slower than unaccelerated, possibly because of the 'draw few bytes many times' method. 4 2.6 rivafb accelerated has similar performance at any color depth, possibly because of 'draw lots of bytes a fewer times' method. 5 With the changes, there is a speed gain of ~1.7 seconds and ~5.7 seconds with 8x16 and 12x22 fonts respectively indepependent of the color depth or acceleration used. The speed gain is constant but significant. Below is a patch against 2.6.7-mm5. The effects will be very noticeable with drivers that uses SCROLL_REDRAW, but one should still see some speed gain even if SCROLL_YPAN/YWRAP is used. Separated fb_sys_move_* into fb_iosys_move_* and fb_sysmove_* to reduce penalty when constructing fb_image->data from character maps. In my testcase (1024x768 SCROLL_REDRAW), I get a ~1.7 second advantage with 'time cat MAINTAINERS' using 8x16 fonts and ~5.7 seconds with 12x22 fonts. The speed gain is independent of acceleration or color depth. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
Signed-off-by: Adrian Bunk <bunk@fs.tum.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
Signed-off-by: Adrian Bunk <bunk@fs.tum.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
rmk's patch found a defined-but-unimplemented symbol Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jan Kara authored
It fixes a possible race between quotaoff and prune_icache. The race could lead to some forgotten pointers to quotas in inodes leading later to BUG when invalidating quota structures. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Martin J. Bligh authored
Based on work from Bill Irwin <wli@holomorphy.com> physnode_map[] needs to be signed so that pfn_to_nid() can return negative values used to detect invalid pfn's. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Matt Porter authored
This patch enables the Redwood 5 and Redwood 6 platforms to use the smc91x ethernet driver. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paul Mackerras authored
We have a platform-specific function pointer on ppc64 for a function to log errors detected by the platform, but it was never getting set. This patch sets it on pSeries (the only ppc64 platform which has an error logging function). Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paul Mackerras authored
From: Linas Vepstas <linas@austin.ibm.com> This patch eliminates the usage of the deprecated ibm,fw-phb-id token for idnetifying PCI bus heads in favor of the documented, offically supported mechanism for obtaining this info. Please note that some versions of firmware may return incorrect values for the ibm,fw-phb-id token. Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
gcc-2.95 chokes on this. Cc: Anton Altaparmakov <aia21@cantab.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 02 Jul, 2004 14 commits
-
-
Chris Wright authored
SuSE discovered this problem with chown and ATTR_GID. Make sure user is authorized to change the group, CAN-2004-0497.
-
Linus Torvalds authored
It's one of the rare files that has almost no includes what-so-ever, so it actually never got NULL any other way.
-
Andries E. Brouwer authored
Two years ago, OGAWA Hirofumi removed some ugly code and added a few simple tests to the FAT filesystem code, intended to avoid recognizing non-FAT as FAT (for people who fail to specify rootfstype=, forcing the kernel to guess). That worked fairly well, until this year. I have now seen a thread in Czech and a report from Holland that involved the "FAT: bogus sectors-per-track value" error message. The patch below removes this test again. The advantage is that some real-life FAT filesystems can be mounted again. The disadvantage that more non-FAT fss will be accepted as FAT. Ferry van Steen <freaky@bananateam.nl> reports "the patch Andries Brouwer gave me seems to work". Signed-off-by: Andries Brouwer <aeb@cwi.nl> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Mika Kukkonen authored
This fixes the the remaining 0 to NULL things that were found with 'make allmodconfig' and 'make C=1 vmlinux'.
-
bk://linux-ntfs.bkbits.net/ntfs-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Anton Altaparmakov authored
into cantab.net:/home/src/ntfs-2.6
-
Anton Altaparmakov authored
into cantab.net:/home/src/ntfs-2.6
-
Anton Altaparmakov authored
enables the writing of page cache pages belonging to mst protected attributes like the index allocation attribute in directory indices and other indices like $Quota/$Q, etc. This means that the quota is now marked out of date on all volumes rather than only on ones where the quota defaults entry is in the index root attribute of the $Quota/$Q index. Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
-
Anton Altaparmakov authored
page has buffers. Otherwise we could end up with a dirty page without buffers and our set_page_dirty() would not mark the buffers dirty when they are created and thus they would not be written out and the dirty records would be lost. Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
-
Chris Wright authored
Any proc entry with default proc_file_inode_operations allow unauthorized attribute updates. This is very dangerous for proc entries that rely solely on file permissions for open/read/write. Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Anton Altaparmakov authored
buffers that are inside the ntfs record in the page dirty after which it sets the page dirty. This allows ->writepage to only write the dirty index records rather than having to write all the records in the page. Modify fs/ntfs/index.h::ntfs_index_entry_mark_dirty() to use this rather than __set_page_dirty_nobuffers(). Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
-
Anton Altaparmakov authored
It is simply set to __set_page_dirty_nobuffers() to make sure that running set_page_dirty() on a page containing mft/ntfs records will not affect the dirty state of the page buffers. Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
-
bk://kernel.bkbits.net/davem/tg3-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
David S. Miller authored
into kernel.bkbits.net:/home/davem/tg3-2.6
-