- 10 Jun, 2016 7 commits
-
-
Daniel Vetter authored
Split out from my big nonblocking atomic commit helper code as prep work. While add it, also add some neat asciiart to document how it's supposed to be used. v2: Resurrect misplaced hunk in the kerneldoc. v3: Wording improvements from Liviu. Tested-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Tested-by:
Liviu Dudau <Liviu.Dudau@arm.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-8-git-send-email-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
atomic_flush seems to be the right place, right after we commit the plane updates. Again use the fullproof version, since the pipe might be off. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by:
-
Daniel Vetter authored
The drm core has a nice ready-made helper for exactly the simple case where it should fire on the next vblank. Note that arming the vblank event in _begin is probably too early, and might easily result in the vblank firing too early, before the new set of planes are actually disabled. But that's kinda a minor issue compared to just outright hanging userspace. v2: Be more robust and either arm, when the CRTC is on, or just send the event out right away. v3: Just unconditionally send out the event directly, for safety - arcpgu doesn't even have vblank support ... Cc: Carlos Palminha <palminha@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Signed-off-by:
-
Daniel Vetter authored
- dev is redundant, we have state->atomic - add stall parameter, which must be set when swapping needs to stall for preceeding commits to stop looking at ->state pointers. Currently all drivers need this to be, just prep work for a glorious future. v2: Rebased on top of commit e7cf0963 Author: Gerd Hoffmann <kraxel@redhat.com> Date: Tue May 31 08:50:47 2016 +0200 virtio-gpu: add atomic_commit function Cc: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465509992-19284-1-git-send-email-daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-2-git-send-email-daniel.vetter@ffwll.ch
-
Tomeu Vizoso authored
They are deprecated and by moving their implementations to bind/unbind we can call drm_connector_register_all instead of open-coding it. Signed-off-by:
-
Brian Norris authored
Rockchip DRM does not yet build properly for ARM64, but we might as well get the printf formatting correct now, to avoid the following warnings: drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c: In function 'rockchip_drm_fbdev_create': drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:111:2: warning: format '%d' expects argument of type 'int', but argument 8 has type 'size_t' [-Wformat=] DRM_DEBUG_KMS("FB [%dx%d]-%d kvaddr=%p offset=%ld size=%d\n", ^ drivers/gpu/drm/rockchip/rockchip_drm_gem.c: In function 'rockchip_gem_alloc_buf': drivers/gpu/drm/rockchip/rockchip_drm_gem.c:41:3: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'size_t' [-Wformat=] DRM_ERROR("failed to allocate %#x byte dma buffer", obj->size); ^ Signed-off-by:Brian Norris <briannorris@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Caesar Wang <wxt@rock-chips.com> Signed-off-by:
-
Tobias Jakobi authored
The current bitwise AND should result in the same assembler but this is what the code is actually supposed to do. Signed-off-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by:
Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by:
-
- 09 Jun, 2016 17 commits
-
-
Laurent Pinchart authored
The drm_crtc.c file is a mess, making the ABI documentation confusing since all functions are in the same bag. Split the format-related helpers to a new drm_fourcc.c file. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Daniel Vetter authored
Just a bit of drive-by ocd. v2: Improve per Liviu's feedback. Cc: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by:
-
Daniel Vetter authored
atomic_flush seems to be the right place, but I'm not entirely sure whether this will catch them all. It could be that when disabling the crtc we'll miss the vblank. While at it nuke the dummy functions. v2: Be more robust and either arm, when the CRTC is on, or just send the event out right away. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Archit Taneja <architt@codeaurora.org> Reviewed-by:
-
Daniel Vetter authored
No idea how exactly fsl-du commits hw state changes, but here in flush is probably the safest place. While at it nuke the dummy functions. v2: Be more robust and either arm, when the CRTC is on, or just send the event out right away. Cc: Stefan Agner <stefan@agner.ch> Reviewed-by:
-
Daniel Vetter authored
This is just used for cleanup in preclose, and with the reworked event handling code this is now done properly by the core. Nuke it! But it also shows that arc totally fails at sending out drm events for flips. Next patch will hack that up. v2: Rebase it! Cc: Carlos Palminha <palminha@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Reviewed-by:
-
Daniel Vetter authored
Drivers transitioning to atomic might not yet want to enable full DRIVER_ATOMIC support when it's not entirely working. But using atomic internally makes a lot more sense earlier. Instead of spreading such flags to more places I figured it's simpler to just check for mode_config->funcs->atomic_commit, and use atomic paths if that is set. For the only driver currently transitioning (i915) this does the right thing. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Daniel Vetter authored
kernel-doc wants a : at the end. Acked-by: jani.nikula@linux.intel.com Signed-off-by:
-
Boris Brezillon authored
All outputs have a 1:1 relationship between connectors and encoders and the driver is relying on the atomic helpers: we can drop the custom ->best_encoder() implementations and let the core call drm_atomic_helper_best_encoder() for us. Signed-off-by:
Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
-
Boris Brezillon authored
For all outputs except DSI we have a 1:1 relationship between connectors and encoders and the driver is relying on the atomic helpers: we can drop the custom ->best_encoder() and let the core call drm_atomic_helper_best_encoder() for us. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
-
Boris Brezillon authored
We have a 1:1 relationship between connectors and encoders and the driver is relying on the atomic helpers: we can drop the custom ->best_encoder() implementation and let the core call drm_atomic_helper_best_encoder() for us. Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Lukas Wunner authored
The PM core introduced the ability to keep devices runtime suspended during the entire system suspend/resume process with commit aae4518b ("PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily"). Before this so-called "direct-complete" procedure was introduced, devices were always runtime resumed only to be immediately put to sleep again using their ->suspend hook. Direct-complete is enabled by returning a positive value from the ->prepare hook. The PCI core usually does this automatically. Direct-complete is only available for a device if all children use it as well. Currently we cannot support direct-complete for DRM drivers because the DRM core automatically registers multiple DRM minors which belong to device class drm_class, and drm_class uses a struct dev_pm_ops which lacks the ->prepare callback. While this could be solved by adding the missing ->prepare callback, closer inspection shows that there are no DRM drivers left which declare the legacy ->suspend and ->resume callbacks in their drm_driver struct. The last ones to remove them were i915 with commit 1751fcf9 ("drm/i915: Fix module initialisation, v2.") and exynos with commit e7fefb1d ("drm/exynos: remove legacy ->suspend()/resume()"). Consequently the struct dev_pm_ops of drm_class is now dead code. Remove it. If no dev_pm_ops is declared for a device, the PM core automatically enables direct-complete for it, thereby making that mechanism available to the parent DRM PCI devices. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxDave Airlie authored
omapdrm changes for 4.8 * Update MAINTAINERS file for omapdrm and tilcdc * PLL refactoring to allow versatile use of the PLL clocks * Public omapdss header refactoring to separate omapfb and omapdrm * Gamma table support * Support reset GPIO and vcc regulator in omapdrm's panel-dpi * Minor cleanups * tag 'omapdrm-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (69 commits) drm/omapdrm: Implement gamma_lut atomic crtc properties drm/omapdrm: Workaround for errata i734 (LCD1 Gamma) in DSS dispc drm/omapdrm: Add gamma table support to DSS dispc drm: drm_helper_crtc_enable_color_mgmt() => drm_crtc_enable_color_mgmt() drm/omap: rename panel/encoder Kconfig names drm: omapdrm: add DSI mapping drm: omapdrm: Remove unused omap_framebuffer_bo function drm: omapdrm: Remove unused omap_gem_tiled_size function drm: omapdrm: panel-lgphilips-lb035q02: Remove unused backlight GPIO drm/omap: panel-dpi: implement support for a vcc regulator drm/omap: panel-dpi: make (limited) use of a reset gpio devicetree/bindings: add reset-gpios and vcc-supply for panel-dpi MAINTAINERS: Add maintainer for TI LCDC DRM driver MAINTAINERS: Add maintainer for OMAP DRM driver drm/omap: fix pitch round-up drm/omap: remove align_pitch() drm/omap: remove unnecessary pitch round-up drm/omap: remove unneeded gpio includes drm/omap: Remove the video/omapdss.h and move it's content to local header file [media] omap_vout: Switch to use the video/omapfb_dss.h header file ...
-
git://git.kraxel.org/linuxDave Airlie authored
Virtio-gpu updates * 'virtio-gpu-for-airlied' of git://git.kraxel.org/linux: virtio-gpu: use src not crtc virtio-gpu: pick up hotspot from framebuffer add cursor hotspot to drm_framebuffer virtio-gpu: switch to atomic cursor interfaces virtio-gpu: add atomic_commit function virtio-gpu: fix output lookup
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
- some polish for the guc code (Dave Gordon) - big refactoring of gen9 display clock handling code (Ville) - refactoring work in the context code (Chris Wilson) - give encoder/crtc/planes useful names for debug output (Ville) - improvements to skl/kbl wm computation code (Mahesh Kumar) - bunch of smaller improvements all over as usual * tag 'drm-intel-next-2016-06-06' of git://anongit.freedesktop.org/drm-intel: (64 commits) drm/i915: Update DRIVER_DATE to 20160606 drm/i915: Extract physical display dimensions from VBT drm/i915: Silence "unexpected child device config size" for VBT on 845g drm/i915/skl+: Use scaling amount for plane data rate calculation (v4) drm/i915/skl+: calculate plane pixel rate (v4) drm/i915/skl+: calculate ddb minimum allocation (v6) drm/i915: Don't try to calculate relative data rates during hw readout drm/i915: Only ignore eDP ports that are connected drm/i915: Update GEN6_PMINTRMSK setup with GuC enabled drm/i915: kill STANDARD/CURSOR plane screams drm/i915: Give encoders useful names drm/i915: Give meaningful names to all the planes drm/i915: Don't leak primary/cursor planes on crtc init failure drm/i915: Set crtc->name to "pipe A", "pipe B", etc. drm/i915: Use plane->name in debug prints drm/i915: Use crtc->name in debug messages drm/i915: Reject modeset if the dotclock is too high drm/i915: Fix NULL pointer deference when out of PLLs in IVB drm/i915/ilk: Don't disable SSC source if it's in use drm/i915/bxt: Sanitize CDCLK to fix breakage during S4 resume ...
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
As promised, piles of prep work all around: - drm_atomic_state rework, prep for nonblocking commit helpers - fence patches from Gustavo and Christian to prep for atomic fences and some cool work in ttm/amdgpu from Christian - drm event prep for both nonblocking commit and atomic fences - Gustavo seems on a crusade against the non-kms-native version of the vblank functions. - prep work from Boris to nuke all the silly ->best_encoder implementations we have (we really only need that for truly dynamic cases like dvi-i vs dvi-d or dp mst selecting the right transcoder on intel) - prep work from Laurent to rework the format handling functions - and few small things all over * tag 'topic/drm-misc-2016-06-07' of git://anongit.freedesktop.org/drm-intel: (47 commits) drm/dsi: Implement set tear scanline drm/fb_cma_helper: Implement fb_mmap callback drm/qxl: Remove useless drm_fb_get_bpp_depth() call drm/ast: Remove useless drm_fb_get_bpp_depth() call drm/atomic: Fix remaining places where !funcs->best_encoder is valid drm/core: Change declaration for gamma_set. Documentation: add fence-array to kernel DocBook drm/shmobile: use drm_crtc_vblank_{get,put}() drm/radeon: use drm_crtc_vblank_{get,put}() drm/qxl: use drm_crtc_vblank_{get,put}() drm/atmel: use drm_crtc_vblank_{get,put}() drm/armada: use drm_crtc_vblank_{get,put}() drm/amdgpu: use drm_crtc_vblank_{get,put}() drm/virtio: use drm_crtc_send_vblank_event() drm/udl: use drm_crtc_send_vblank_event() drm/qxl: use drm_crtc_send_vblank_event() drm/atmel: use drm_crtc_send_vblank_event() drm/armada: use drm_crtc_send_vblank_event() drm/doc: Switch to sphinx/rst fixed-width quoting drm/doc: Drop kerneldoc for static functions in drm_irq.c ...
-
Dave Airlie authored
Merge tag 'topic/lockless-gem-bo-freeing-2016-06-01' of git://anongit.freedesktop.org/drm-intel into drm-next lockless gem bo freeing patches (and the oddball related patch) for all the drivers who's maintainers are asleep at the helm - includes you ;-) I based this on top of drm-fixes to include Chris' fix for the cma issue. * tag 'topic/lockless-gem-bo-freeing-2016-06-01' of git://anongit.freedesktop.org/drm-intel: (21 commits) drm/arcpgu: Use lockless gem BO free callback drm/sun4i: Use lockless gem BO free callback drm/omapdrm: Nuke dummy fb->dirty callback drm/msm: Nuke dummy fb->dirty callback drm/rockchip: Use cma gem vm ops drm/sti: Use lockless gem BO free callback drm: sti: remove useless call to dev->struct_mutex drm/virtio: Use lockless gem BO free callback drm/tilcdc: Use lockless gem BO free callback drm/shmob: Use lockless gem BO free callback drm/rockchip: Use lockless gem BO free callback drm/rcar-du: Use lockless gem BO free callback drm/qxl: Use lockless gem BO free callback drm/nouveau: Use lockless gem BO free callback drm/mga200g: Use lockless gem BO free callback drm/fls-dcu: Use lockless gem BO free callback drm/cirrus: Use lockless gem BO free callback drm/bochs: Use lockless gem BO free callback drm/atmel: Use lockless gem BO free callback drm/ast: Use lockless gem BO free callback ...
-
Dave Airlie authored
Daniel has a pull request that relies on stuff in fixes that are in rc2.
-
- 07 Jun, 2016 16 commits
-
-
Vinay Simha BN authored
Provide a small convenience wrapper that transmits a set_tear_scanline command. v2: * helper function suggested by Thierry for set_tear_scanline * Also includes small build fixes from Sumit Semwal. v3: one scanline parameter suggested by jani v4: passing the payload properly as suggested by jani Cc: Archit Taneja <archit.taneja@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:Vinay Simha BN <simhavcs@gmail.com> Reviewed-by:
Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Robin Murphy authored
In the absence of an fb_mmap callback, the fbdev code falls back to a naive implementation which relies upon the DMA address being the same as the physical address, and the buffer being physically contiguous from there. Whilst this often holds for standard CMA allocations via the platform's regular DMA ops, if the allocation is provided by an IOMMU then such assumptions can fall apart spectacularly. To resolve this, reroute the fb_mmap call to the appropriate DMA API implementation, as per the other cma_helper calls. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Laurent Pinchart authored
The function has no side effect and its returned values are ignored, don't call it. Signed-off-by:
-
Laurent Pinchart authored
The function has no side effect and its returned values are ignored, don't call it. Signed-off-by:
-
Boris Brezillon authored
Adapt drm_pick_crtcs() and update_connector_routing() to fallback to drm_atomic_helper_best_encoder() if funcs->best_encoder() is NULL so that DRM drivers can leave this hook unassigned if they know they want to use drm_atomic_helper_best_encoder(). Update the vtables documentation accordingly. Signed-off-by:
-
Jyri Sarha authored
Implement gamma_lut atomic crtc properties, set crtc gamma size to 256 for all crtcs and use drm_atomic_helper_legacy_gamma_set() as gamma_set func. The tv-out crtc has 1024 element gamma table (with 10bit precision) in HW, but current Xorg server does not accept anything else but 256 elements so that is used for all CRTCs. The dss dispc API converts table of any length for HW and uses linear interpolation in the process. The default gamma table is restored if gamma_lut property is deleted. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Jyri Sarha authored
Workaround for errata i734 in DSS dispc - LCD1 Gamma Correction Is Not Working When GFX Pipe Is Disabled For gamma tables to work on LCD1 the GFX plane has to be used at least once after DSS HW has come out of reset. The workaround sets up a minimal LCD setup with GFX plane and waits for one vertical sync irq before disabling the setup and continuing with the context restore. The physical outputs are gated during the operation. For details see: OMAP543x Multimedia Device Silicon Revision 2.0 Silicon Errata Literature Number: SWPZ037E Or some other relevant errata document for the DSS IP version. Signed-off-by:
-
Jyri Sarha authored
Add gamma table support to DSS dispc. DSS driver initializes the default gamma table at component bind time and holds a copy of all gamma tables in its internal data structure. Each call to dispc_mgr_set_gamma() updates the internal table and triggers write to the HW, if it is enabled. The tables are restored to HW in PM resume callback. The drivers internal data structure match the HW tables in size and in number of significant bits per color component. The dispc_mgr_set_gamma() converts the size of any given table for the internal data structure using linear interpolation. Default gamma table is restored if NULL is given in place of gamma lut. dispc_mgr_gamma_size() gives HW gamma table size for the channel and returns 0 if gamma table is not supported by the HW or the DSS driver. Signed-off-by:
-
Jyri Sarha authored
Add drm_crtc_enable_color_mgmt(), remove drm_helper_crtc_enable_color_mgmt() and update drm/i915-driver (the only user of the old function). The new function is more flexible. It allows driver to enable only the features it has without forcing to enable all three color management properties: degamma lut, csc matrix (ctm), and gamma lut. Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Maarten Lankhorst authored
Change return value to int to propagate errors from gamma_set, and remove start parameter. Updates always use the full size, and some drivers even ignore the start parameter altogether. This is needed for atomic drivers, where an atomic commit can fail with -EINTR or -ENOMEM and should be restarted. This is already and issue for drm_atomic_helper_legacy_set_gamma, which this patch fixes up. Changes since v1: - Fix compiler warning. (Emil) - Fix commit message (Daniel) Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Eric Anholt <eric@anholt.net> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Mathieu Larouche <mathieu.larouche@matrox.com> Cc: Thierry Reding <treding@nvidia.com> Acked-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Tomi Valkeinen authored
Merge omapdss public header refactoring, which separates the public header into omapdrm and omapfb parts.
-
Gerd Hoffmann authored
Pick up the correct source rectangle from framebuffer. Without this multihead setups are not working correctly. Signed-off-by:Gerd Hoffmann <kraxel@redhat.com>
-
Gerd Hoffmann authored
Signed-off-by: -
Gerd Hoffmann authored
Reviewed-by:
-
Gerd Hoffmann authored
Signed-off-by: -
Gerd Hoffmann authored
Do modesets first, then call drm_atomic_helper_commit_planes with active_only = true. That way the outputs doesn't get disabled temporarly on atomic commits. Signed-off-by:
-
