- 26 Jan, 2017 13 commits
-
-
Bjorn Helgaas authored
commit 89e9f7bc upstream. Martin reported that the Supermicro X8DTH-i/6/iF/6F advertises incorrect host bridge windows via _CRS: pci_root PNP0A08:00: host bridge window [io 0xf000-0xffff] pci_root PNP0A08:01: host bridge window [io 0xf000-0xffff] Both bridges advertise the 0xf000-0xffff window, which cannot be correct. Work around this by ignoring _CRS on this system. The downside is that we may not assign resources correctly to hot-added PCI devices (if they are possible on this system). Link: https://bugzilla.kernel.org/show_bug.cgi?id=42606Reported-by:
Martin Burnicki <martin.burnicki@meinberg.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gu Zheng authored
commit 497de07d upstream. This change was missed the tmpfs modification in In CVE-2016-7097 commit 07393101 ("posix_acl: Clear SGID bit when setting file permissions") It can test by xfstest generic/375, which failed to clear setgid bit in the following test case on tmpfs: touch $testfile chown 100:100 $testfile chmod 2755 $testfile _runas -u 100 -g 101 -- setfacl -m u::rwx,g::rwx,o::rwx $testfile Signed-off-by:
Gu Zheng <guzheng1@huawei.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by:
-
Vladimir Zapolskiy authored
commit af92305e upstream. On i.MX31 AVIC interrupt controller base address is at 0x68000000. The problem was shadowed by the AVIC driver, which takes the correct base address from a SoC specific header file. Fixes: d2a37b3d ("ARM i.MX31: Add devicetree support") Signed-off-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Vladimir Zapolskiy authored
commit 1f87aee6 upstream. i.MX31 Clock Control Module controller is found on AIPS2 bus, move it there from SPBA bus to avoid a conflict of device IO space mismatch. Fixes: ef0e4a60 ("ARM: mx31: Replace clk_register_clkdev with clock DT lookup") Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Vladimir Zapolskiy authored
commit 2e575cbc upstream. The type of AVIC interrupt controller found on i.MX31 is one-cell, namely 31 for CCM DVFS and 53 for CCM, however for clock control module its interrupts are specified as 3-cells, fix it. Fixes: ef0e4a60 ("ARM: mx31: Replace clk_register_clkdev with clock DT lookup") Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit cf346d5b upstream. Both register_perl_scripting() and register_python_scripting() allocate this variable, fix it by checking if it already was. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 7e4b21b8 ("perf/scripts: Add Python scripting engine") Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Kamal Heib authored
commit 0b59970e upstream. Remove the warning print of "can't use of GFP_NOIO" to avoid prints in each QP creation when devices aren't supporting IB_QP_CREATE_USE_GFP_NOIO. This print become more annoying when the IPoIB interface is configured to work in connected mode. Fixes: 09b93088 ('IB: Add a QP creation flag to use GFP_NOIO allocations') Signed-off-by:
Kamal Heib <kamalh@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Eran Ben Elisha authored
commit 1f22e454 upstream. According to the firmware spec, FLOW_STEERING_IB_UC_QP_RANGE command is supported only if dmfs_ipoib bit is set. If it isn't set we want to ensure allocating NET_IF QPs fail. We do so by filling out the allocation bitmap. By thus, the NET_IF QPs allocating function won't find any free QP and will fail. Fixes: c1c98501 ('IB/mlx4: Add support for steerable IB UD QPs') Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
commit 6fa26208 upstream. Report the correct speed in the port attributes when using a 56Gbps ethernet link. Without this change the field is incorrectly set to 10. Fixes: a9c766bb ('IB/mlx4: Fix info returned when querying IBoE ports') Fixes: 2e96691c ('IB: Use central enum for speed instead of hard-coded values') Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
commit c482af64 upstream. For non-special QPs, the port value becomes non-zero only at the RESET-to-INIT transition. If the QP has not undergone that transition, its port number value is still zero. If such a QP is destroyed before being moved out of the RESET state, subtracting one from the qp port number results in a negative value. Using that negative value as an index into the qp1_proxy array results in an out-of-bounds array reference. Fix this by testing that the QP type is one that uses qp1_proxy before using the port number. For special QPs of all types, the port number is specified at QP creation time. Fixes: 9433c188 ("IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Maor Gottlieb authored
commit af4295c1 upstream. Set traffic class within sl_tclass_flowlabel when create iboe AH. Without this the TOS value will be empty when running VLAN tagged traffic, because the TOS value is taken from the traffic class in the address handle attributes. Fixes: 9106c410 ('IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE') Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Eli Cohen authored
commit acbda523 upstream. Wait before continuing unload till all pending mkey async creation requests are done. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Steven Rostedt authored
commit 8329e818 upstream. Matt Fleming reported seeing crashes when enabling and disabling function profiling which uses function graph tracer. Later Namhyung Kim hit a similar issue and he found that the issue was due to the jmp to ftrace_stub in ftrace_graph_call was only two bytes, and when it was changed to jump to the tracing code, it overwrote the ftrace_stub that was after it. Masami Hiramatsu bisected this down to a binutils change: 8dcea93252a9ea7dff57e85220a719e2a5e8ab41 is the first bad commit commit 8dcea93252a9ea7dff57e85220a719e2a5e8ab41 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri May 15 03:17:31 2015 -0700 Add -mshared option to x86 ELF assembler This patch adds -mshared option to x86 ELF assembler. By default, assembler will optimize out non-PLT relocations against defined non-weak global branch targets with default visibility. The -mshared option tells the assembler to generate code which may go into a shared library where all non-weak global branch targets with default visibility can be preempted. The resulting code is slightly bigger. This option only affects the handling of branch instructions. Declaring ftrace_stub as a weak call prevents gas from using two byte jumps to it, which would be converted to a jump to the function graph code. Link: http://lkml.kernel.org/r/20160516230035.1dbae571@gandalf.local.homeReported-by:
Matt Fleming <matt@codeblueprint.co.uk> Reported-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
- 20 Jan, 2017 1 commit
-
-
Greg Kroah-Hartman authored
-
- 19 Jan, 2017 26 commits
-
-
Niklas Söderlund authored
commit 5d7400c4 upstream. Always stating PIN_CONFIG_BIAS_DISABLE is supported gives untrue output when examining /sys/kernel/debug/pinctrl/e6060000.pfc/pinconf-pins if the operation get_bias() is implemented but the pin is not handled by the get_bias() implementation. In that case the output will state that "input bias disabled" indicating that this pin has bias control support. Make support for PIN_CONFIG_BIAS_DISABLE depend on that the pin either supports SH_PFC_PIN_CFG_PULL_UP or SH_PFC_PIN_CFG_PULL_DOWN. This also solves the issue where SoC specific implementations print error messages if their particular implementation of {set,get}_bias() is called with a pin it does not know about. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Johan Hovold authored
commit fe0f3168 upstream. Make sure to drop any reference taken by bus_find_device() in the sysfs callbacks that are used to create and destroy devices based on device-tree entries. Fixes: 6bccf755 ("[POWERPC] ibmebus: dynamic addition/removal of adapters, some code cleanup") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Johan Hovold authored
commit 815a7141 upstream. Make sure to drop any reference taken by bus_find_device() when creating devices during init and driver registration. Fixes: 55347cc9 ("[POWERPC] ibmebus: Add device creation and bus probing based on of_device") Signed-off-by:
-
Johan Hovold authored
commit c090959b upstream. Make sure to drop the reference to the parent device taken by class_find_device() after populating the bus. Fixes: 3b9334ac ("mfd: vexpress: Convert custom func API to regmap") Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Gabriel Krisman Bertazi authored
commit c02ebfdd upstream. Commit 0e87e58b ("blk-mq: improve warning for running a queue on the wrong CPU") attempts to avoid triggering the WARN_ON in __blk_mq_run_hw_queue when the expected CPU is dead. Problem is, in the last batch execution before round robin, blk_mq_hctx_next_cpu can schedule a dead CPU and also update next_cpu to the next alive CPU in the mask, which will trigger the WARN_ON despite the previous workaround. The following patch fixes this scenario by always scheduling the value in hctx->next_cpu. This changes the moment when we round-robin the CPU running the hctx, but it really doesn't matter, since it still executes BLK_MQ_CPU_WORK_BATCH times in a row before switching to another CPU. Fixes: 0e87e58b ("blk-mq: improve warning for running a queue on the wrong CPU") Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Prarit Bhargava authored
commit a545715d upstream. When removing and adding cpu 0 on a system with GHES NMI the following stack trace is seen when re-adding the cpu: WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1349 setup_local_APIC+ Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache coretemp intel_ra CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6+ #2 Call Trace: dump_stack+0x63/0x8e __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 setup_local_APIC+0x275/0x370 apic_ap_setup+0xe/0x20 start_secondary+0x48/0x180 set_init_arg+0x55/0x55 early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x13d/0x14c During the cpu bringup, wakeup_cpu_via_init_nmi() is called and issues an NMI on CPU 0. The GHES NMI handler, ghes_notify_nmi() runs the ghes_proc_irq_work work queue which ends up setting IRQ_WORK_VECTOR (0xf6). The "faulty" IR line set at arch/x86/kernel/apic/apic.c:1349 is also 0xf6 (specifically APIC IRR for irqs 255 to 224 is 0x400000) which confirms that something has set the IRQ_WORK_VECTOR line prior to the APIC being initialized. Commit 2383844d ("GHES: Elliminate double-loop in the NMI handler") incorrectly modified the behavior such that the handler returns NMI_HANDLED only if an error was processed, and incorrectly runs the ghes work queue for every NMI. This patch modifies the ghes_proc_irq_work() to run as it did prior to 2383844d ("GHES: Elliminate double-loop in the NMI handler") by properly returning NMI_HANDLED and only calling the work queue if NMI_HANDLED has been set. Fixes: 2383844d (GHES: Elliminate double-loop in the NMI handler) Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Tejun Heo authored
commit ebc4ff66 upstream. cfq_cpd_alloc() which is the cpd_alloc_fn implementation for cfq was incorrectly hard coding GFP_KERNEL instead of using the mask specified through the @gfp parameter. This currently doesn't cause any actual issues because all current callers specify GFP_KERNEL. Fix it. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: e4a9bde9 ("blkcg: replace blkcg_policy->cpd_size with ->cpd_alloc/free_fn() methods") Signed-off-by:
-
Denis Kirjanov authored
commit 8a10c06a upstream. With preemption turned on we can read incorrect throttling state while being switched to CPU on a different chip. BUG: using smp_processor_id() in preemptible [00000000] code: cat/7343 caller is .powernv_cpufreq_throttle_check+0x2c/0x710 CPU: 13 PID: 7343 Comm: cat Not tainted 4.8.0-rc5-dirty #1 Call Trace: [c0000007d25b75b0] [c000000000971378] .dump_stack+0xe4/0x150 (unreliable) [c0000007d25b7640] [c0000000005162e4] .check_preemption_disabled+0x134/0x150 [c0000007d25b76e0] [c0000000007b63ac] .powernv_cpufreq_throttle_check+0x2c/0x710 [c0000007d25b7790] [c0000000007b6d18] .powernv_cpufreq_target_index+0x288/0x360 [c0000007d25b7870] [c0000000007acee4] .__cpufreq_driver_target+0x394/0x8c0 [c0000007d25b7920] [c0000000007b22ac] .cpufreq_set+0x7c/0xd0 [c0000007d25b79b0] [c0000000007adf50] .store_scaling_setspeed+0x80/0xc0 [c0000007d25b7a40] [c0000000007ae270] .store+0xa0/0x100 [c0000007d25b7ae0] [c0000000003566e8] .sysfs_kf_write+0x88/0xb0 [c0000007d25b7b70] [c0000000003553b8] .kernfs_fop_write+0x178/0x260 [c0000007d25b7c10] [c0000000002ac3cc] .__vfs_write+0x3c/0x1c0 [c0000007d25b7cf0] [c0000000002ad584] .vfs_write+0xc4/0x230 [c0000007d25b7d90] [c0000000002aeef8] .SyS_write+0x58/0x100 [c0000007d25b7e30] [c00000000000bfec] system_call+0x38/0xfc Fixes: 09a972d1 (cpufreq: powernv: Report cpu frequency throttling) Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
NeilBrown authored
commit cfd278c2 upstream. Various places assume that if nfs4_fl_prepare_ds() turns a non-NULL 'ds', then ds->ds_clp will also be non-NULL. This is not necessasrily true in the case when the process received a fatal signal while nfs4_pnfs_ds_connect is waiting in nfs4_wait_ds_connect(). In that case ->ds_clp may not be set, and the devid may not recently have been marked unavailable. So add a test for ds_clp == NULL and return NULL in that case. Fixes: c23266d5 ("NFS4.1 Fix data server connection race") Signed-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Olga Kornievskaia <aglo@umich.edu> Acked-by:
Adamson, Andy <William.Adamson@netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 79f687a3 upstream. Ben Coddington reports that commit 311324ad, by adding the function nfs_dir_mapping_need_revalidate() that checks page cache validity on each call to nfs_readdir() causes a performance regression when the directory is being modified. If the directory is changing while we're iterating through the directory, POSIX does not require us to invalidate the page cache unless the user calls rewinddir(). However, we still do want to ensure that we use readdirplus in order to avoid a load of stat() calls when the user is doing an 'ls -l' workload. The fix should be to invalidate the page cache immediately when we're setting the NFS_INO_ADVISE_RDPLUS bit. Reported-by:
Benjamin Coddington <bcodding@redhat.com> Fixes: 311324ad ("NFS: Be more aggressive in using readdirplus...") Reviewed-by:
-
Trond Myklebust authored
commit ee284e35 upstream. We must put the task to sleep while holding the inode->i_lock in order to ensure atomicity with the test for NFS_LAYOUT_RETURN. Fixes: 500d701f ("NFS41: make close wait for layoutreturn") Signed-off-by:
-
Neil Armstrong authored
commit f24d311f upstream. The pinctrl_gpio_request is called with the "full" gpio number, already containing the base, then meson_pmx_request_gpio is then called with the final pin number. Remove the base addition when calling meson_pmx_disable_other_groups. Fixes: 6ac73095 ("pinctrl: add driver for Amlogic Meson SoCs") CC: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Kevin Hilman <khilman@baylibre.com> Acked-by:
Beniamino Galvani <b.galvani@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Jeff Mahoney authored
commit aa7c8da3 upstream. In __btrfs_run_delayed_refs, the error path when run_delayed_extent_op fails sets locked_ref->processing = 0 but doesn't re-increment delayed_refs->num_heads_ready. As a result, we end up triggering the WARN_ON in btrfs_select_ref_head. Fixes: d7df2c79 (Btrfs: attach delayed ref updates to delayed ref heads) Reported-by:
Jon Nelson <jnelson-suse@jamponi.net> Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Jeff Mahoney authored
commit d0280996 upstream. In __btrfs_run_delayed_refs, when we put back a delayed ref that's too new, we have already dropped the lock on locked_ref when we set ->processing = 0. This patch keeps the lock to cover that assignment. Fixes: d7df2c79 (Btrfs: attach delayed ref updates to delayed ref heads) Signed-off-by:
-
Lukasz Odzioba authored
commit dd853fd2 upstream. A negative number can be specified in the cmdline which will be used as setup_clear_cpu_cap() argument. With that we can clear/set some bit in memory predceeding boot_cpu_data/cpu_caps_cleared which may cause kernel to misbehave. This patch adds lower bound check to setup_disablecpuid(). Boris Petkov reproduced a crash: [ 1.234575] BUG: unable to handle kernel paging request at ffffffff858bd540 [ 1.236535] IP: memcpy_erms+0x6/0x10 Signed-off-by:
Lukasz Odzioba <lukasz.odzioba@intel.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 030ee7ae upstream. The modem-control signals are managed by the tty-layer during open and should not be asserted prematurely when set_termios is called from driver open. Also make sure that the signals are asserted only when changing speed from B0. Fixes: 664d5df9 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by:
-
Johan Hovold authored
commit ce5e2928 upstream. Fix reset-resume handling which failed to resubmit the read and interrupt URBs, thereby leaving a port that was open before suspend in a broken state until closed and reopened. Fixes: 1ded7ea4 ("USB: ch341 serial: fix port number changed after resume") Fixes: 2bfd1c96 ("USB: serial: ch341: remove reset_resume callback") Signed-off-by:
-
Alex Deucher authored
commit 8a08403b upstream. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98897 https://bugs.launchpad.net/bugs/1651981Acked-by:
Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: Adrian Fiergolski <A.Fiergolski@gmail.com> Signed-off-by:
-
Zhou Chengming authored
commit 93362fa4 upstream. Fixes CVE-2016-9191, proc_sys_readdir doesn't drop reference added by grab_header when return from !dir_emit_dots path. It can cause any path called unregister_sysctl_table will wait forever. The calltrace of CVE-2016-9191: [ 5535.960522] Call Trace: [ 5535.963265] [<ffffffff817cdaaf>] schedule+0x3f/0xa0 [ 5535.968817] [<ffffffff817d33fb>] schedule_timeout+0x3db/0x6f0 [ 5535.975346] [<ffffffff817cf055>] ? wait_for_completion+0x45/0x130 [ 5535.982256] [<ffffffff817cf0d3>] wait_for_completion+0xc3/0x130 [ 5535.988972] [<ffffffff810d1fd0>] ? wake_up_q+0x80/0x80 [ 5535.994804] [<ffffffff8130de64>] drop_sysctl_table+0xc4/0xe0 [ 5536.001227] [<ffffffff8130de17>] drop_sysctl_table+0x77/0xe0 [ 5536.007648] [<ffffffff8130decd>] unregister_sysctl_table+0x4d/0xa0 [ 5536.014654] [<ffffffff8130deff>] unregister_sysctl_table+0x7f/0xa0 [ 5536.021657] [<ffffffff810f57f5>] unregister_sched_domain_sysctl+0x15/0x40 [ 5536.029344] [<ffffffff810d7704>] partition_sched_domains+0x44/0x450 [ 5536.036447] [<ffffffff817d0761>] ? __mutex_unlock_slowpath+0x111/0x1f0 [ 5536.043844] [<ffffffff81167684>] rebuild_sched_domains_locked+0x64/0xb0 [ 5536.051336] [<ffffffff8116789d>] update_flag+0x11d/0x210 [ 5536.057373] [<ffffffff817cf61f>] ? mutex_lock_nested+0x2df/0x450 [ 5536.064186] [<ffffffff81167acb>] ? cpuset_css_offline+0x1b/0x60 [ 5536.070899] [<ffffffff810fce3d>] ? trace_hardirqs_on+0xd/0x10 [ 5536.077420] [<ffffffff817cf61f>] ? mutex_lock_nested+0x2df/0x450 [ 5536.084234] [<ffffffff8115a9f5>] ? css_killed_work_fn+0x25/0x220 [ 5536.091049] [<ffffffff81167ae5>] cpuset_css_offline+0x35/0x60 [ 5536.097571] [<ffffffff8115aa2c>] css_killed_work_fn+0x5c/0x220 [ 5536.104207] [<ffffffff810bc83f>] process_one_work+0x1df/0x710 [ 5536.110736] [<ffffffff810bc7c0>] ? process_one_work+0x160/0x710 [ 5536.117461] [<ffffffff810bce9b>] worker_thread+0x12b/0x4a0 [ 5536.123697] [<ffffffff810bcd70>] ? process_one_work+0x710/0x710 [ 5536.130426] [<ffffffff810c3f7e>] kthread+0xfe/0x120 [ 5536.135991] [<ffffffff817d4baf>] ret_from_fork+0x1f/0x40 [ 5536.142041] [<ffffffff810c3e80>] ? kthread_create_on_node+0x230/0x230 One cgroup maintainer mentioned that "cgroup is trying to offline a cpuset css, which takes place under cgroup_mutex. The offlining ends up trying to drain active usages of a sysctl table which apprently is not happening." The real reason is that proc_sys_readdir doesn't drop reference added by grab_header when return from !dir_emit_dots path. So this cpuset offline path will wait here forever. See here for details: http://www.openwall.com/lists/oss-security/2016/11/04/13 Fixes: f0c3b509 ("[readdir] convert procfs") Reported-by:
CAI Qian <caiqian@redhat.com> Tested-by:
Yang Shukui <yangshukui@huawei.com> Signed-off-by:
Zhou Chengming <zhouchengming1@huawei.com> Acked-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Akinobu Mita authored
commit 802c0388 upstream. The sysrq input handler should be attached to the input device which has a left alt key. On 32-bit kernels, some input devices which has a left alt key cannot attach sysrq handler. Because the keybit bitmap in struct input_device_id for sysrq is not correctly initialized. KEY_LEFTALT is 56 which is greater than BITS_PER_LONG on 32-bit kernels. I found this problem when using a matrix keypad device which defines a KEY_LEFTALT (56) but doesn't have a KEY_O (24 == 56%32). Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Richard Genoud authored
commit 89d82324 upstream. If we don't disable the transmitter in atmel_stop_tx, the DMA buffer continues to send data until it is emptied. This cause problems with the flow control (CTS is asserted and data are still sent). So, disabling the transmitter in atmel_stop_tx is a sane thing to do. Tested on at91sam9g35-cm(DMA) Tested for regressions on sama5d2-xplained(Fifo) and at91sam9g20ek(PDC) Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Eric W. Biederman authored
commit 3895dbf8 upstream. Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Fixes: ce07d891 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by:
Krister Johansen <kjlx@templeofstupid.com> Suggested-by:
-
Augusto Mecking Caringi authored
commit c8a6a09c upstream. In ca91cx42_slave_get function, the value pointed by vme_base pointer is set through: *vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]); So it must be dereferenced to be used in calculation of pci_base: *pci_base = (dma_addr_t)*vme_base + pci_offset; This bug was caught thanks to the following gcc warning: drivers/vme/bridges/vme_ca91cx42.c: In function ‘ca91cx42_slave_get’: drivers/vme/bridges/vme_ca91cx42.c:467:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] *pci_base = (dma_addr_t)vme_base + pci_offset; Signed-off-by:
Augusto Mecking Caringi <augustocaringi@gmail.com> Acked-By:
Martyn Welch <martyn@welchs.me.uk> Signed-off-by:
-
Mathias Nyman authored
commit d6169d04 upstream. If a URB is killed while the host is removed we can end up in a situation where the hub thread takes the roothub device lock, and waits for the URB to be given back by xhci-hcd, blocking the host remove code. xhci-hcd tries to stop the endpoint and give back the urb, but can't as the host is removed from PCI bus at the same time, preventing the normal way of giving back urb. Instead we need to rely on the stop command timeout function to give back the urb. This xhci_stop_endpoint_command_watchdog() timeout function used a XHCI_STATE_DYING flag to indicate if the timeout function is already running, but later this flag has been taking into use in other places to mark that xhci is dying. Remove checks for XHCI_STATE_DYING in xhci_urb_dequeue. We are still checking that reading from pci state does not return 0xffffffff or that host is not halted before trying to stop the endpoint. This whole area of stopping endpoints, giving back URBs, and the wathdog timeout need rework, this fix focuses on solving a specific deadlock issue that we can then send to stable before any major rework. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Vlad Tsyrklevich authored
commit 30f939fe upstream. i2c_smbus_xfer() does not always fill an entire block, allowing kernel stack memory disclosure through the temp variable. Clear it before it's read to. Signed-off-by:
Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
John Garry authored
commit 6f724fb3 upstream. In of_i2c_register_device(), when the check for device address validity fails we print the info.addr, which has not been assigned properly. Fix this by printing the actual invalid address. Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
-
