Increase the sizes of the volume ID to 64 bits and the vnode ID (inode
number equivalent) to 96 bits to allow the support of YFS.

This requires the iget comparator to check the vnode->fid rather than i_ino
and i_generation as i_ino is not sufficiently capacious.  It also requires
this data to be placed into the vnode cache key for fscache.

For the moment, just discard the top 32 bits of the vnode ID when returning
it though stat.
Signed-off-by: David Howells <dhowells@redhat.com>

When writing a new page, clear space in the page rather than attempting to
load it from the server if the space is beyond the EOF.
Signed-off-by: David Howells <dhowells@redhat.com>

Add a couple of tracepoints to log the production of I/O errors within the AFS
filesystem.
Signed-off-by: David Howells <dhowells@redhat.com>

Fix afs_deliver_to_call() to handle -EIO being returned by the operation
delivery function, indicating that the call found itself in the wrong
state, by printing an error and aborting the call.

Currently, an assertion failure will occur.  This can happen, say, if the
delivery function falls off the end without calling afs_extract_data() with
the want_more parameter set to false to collect the end of the Rx phase of
a call.

The assertion failure looks like:

	AFS: Assertion failed
	4 == 7 is false
	0x4 == 0x7 is false
	------------[ cut here ]------------
	kernel BUG at fs/afs/rxrpc.c:462!

and is matched in the trace buffer by a line like:

kworker/7:3-3226 [007] ...1 85158.030203: afs_io_error: c=0003be0c r=-5 CM_REPLY

Fixes: 98bf40cd ("afs: Protect call->state changes against signals")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>

Currently the TTL on VL server and address lists isn't set in all
circumstances and may be set to poor choices in others, since the TTL is
derived from the SRV/AFSDB DNS record if and when available.

Fix the TTL by limiting the range to a minimum and maximum from the current
time.  At some point these can be made into sysctl knobs.  Further, use the
TTL we obtained from the upcall to set the expiry on negative results too;
in future a mechanism can be added to force reloading of such data.
Signed-off-by: David Howells <dhowells@redhat.com>

Track VL servers as independent entities rather than lumping all their
addresses together into one set and implement server-level rotation by:

 (1) Add the concept of a VL server list, where each server has its own
     separate address list.  This code is similar to the FS server list.

 (2) Use the DNS resolver to retrieve a set of servers and their associated
     addresses, ports, preference and weight ratings.

 (3) In the case of a legacy DNS resolver or an address list given directly
     through /proc/net/afs/cells, create a list containing just a dummy
     server record and attach all the addresses to that.

 (4) Implement a simple rotation policy, for the moment ignoring the
     priorities and weights assigned to the servers.

 (5) Show the address list through /proc/net/afs/<cell>/vlservers.  This
     also displays the source and status of the data as indicated by the
     upcall.
Signed-off-by: David Howells <dhowells@redhat.com>

Improve the error handling in FS server rotation by:

 (1) Cache the latest useful error value for the fs operation as a whole in
     struct afs_fs_cursor separately from the error cached in the
     afs_addr_cursor struct.  The one in the address cursor gets clobbered
     occasionally.  Copy over the error to the fs operation only when it's
     something we'd be interested in passing to userspace.

 (2) Make it so that EDESTADDRREQ is the default that is seen only if no
     addresses are available to be accessed.

 (3) When calling utility functions, such as checking a volume status or
     probing a fileserver, don't let a successful result clobber the cached
     error in the cursor; instead, stash the result in a temporary variable
     until it has been assessed.

 (4) Don't return ETIMEDOUT or ETIME if a better error, such as
     ENETUNREACH, is already cached.

 (5) On leaving the rotation loop, turn any remote abort code into a more
     useful error than ECONNABORTED.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>

afs_extract_data sets up a temporary iov_iter and passes it to AF_RXRPC
each time it is called to describe the remaining buffer to be filled.

Instead:

 (1) Put an iterator in the afs_call struct.

 (2) Set the iterator for each marshalling stage to load data into the
     appropriate places.  A number of convenience functions are provided to
     this end (eg. afs_extract_to_buf()).

     This iterator is then passed to afs_extract_data().

 (3) Use the new ITER_DISCARD iterator to discard any excess data provided
     by FetchData.
Signed-off-by: David Howells <dhowells@redhat.com>

Include the site of detection of AFS protocol errors in trace lines to
better be able to determine what went wrong.
Signed-off-by: David Howells <dhowells@redhat.com>

Add a new iterator, ITER_DISCARD, that can only be used in READ mode and
just discards any data copied to it.

This is useful in a network filesystem for discarding any unwanted data
sent by a server.
Signed-off-by: David Howells <dhowells@redhat.com>

In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.

Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements.  This makes it easier to add further
iterator types.  Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.

Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself.  Only the direction is required.
Signed-off-by: David Howells <dhowells@redhat.com>

Use accessor functions to access an iterator's type and direction.  This
allows for the possibility of using some other method of determining the
type of iterator than if-chains with bitwise-AND conditions.
Signed-off-by: David Howells <dhowells@redhat.com>

Remove the undefinition of READ and WRITE because these constants may be
used elsewhere in subsequently included header files, thus breaking them.

These constants don't actually appear to be used in the driver, so the
undefinition seems pointless.

Fixes: 4562236b ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: David Howells <dhowells@redhat.com>

net/sched/cls_api.c has overlapping changes to a call to
nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL
to the 5th argument, and another (from 'net-next') added cb->extack
instead of NULL to the 6th argument.

net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to
code which moved (to mr_table_dump)) in 'net-next'.  Thanks to David
Ahern for the heads up.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 6fe94878.

It is causing more serious regressions than the RCU warning
it is fixing.
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to have the 'struct rocker_desc_info *desc_info'
variable static since new value always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David writes:
  "Networking

   1) Fix gro_cells leak in xfrm layer, from Li RongQing.

   2) BPF selftests change RLIMIT_MEMLOCK blindly, don't do that.  From
      Eric Dumazet.

   3) AF_XDP calls synchronize_net() under RCU lock, fix from Björn
      Töpel.

   4) Out of bounds packet access in _decode_session6(), from Alexei
      Starovoitov.

   5) Several ethtool bugs, where we copy a struct into the kernel twice
      and our validations of the values in the first copy can be
      invalidated by the second copy due to asynchronous updates to the
      memory by the user.  From Wenwen Wang.

   6) Missing netlink attribute validation in cls_api, from Davide
      Caratti.

   7) LLC SAP sockets neet to be SOCK_RCU FREE, from Cong Wang.

   8) rxrpc operates on wrong kvec, from Yue Haibing.

   9) A regression was introduced by the disassosciation of route
      neighbour references in rt6_probe(), causing probe for
      neighbourless routes to not be properly rate limited.  Fix from
      Sabrina Dubroca.

   10) Unsafe RCU locking in tipc, from Tung Nguyen.

   11) Use after free in inet6_mc_check(), from Eric Dumazet.

   12) PMTU from icmp packets should update the SCTP transport pathmtu,
       from Xin Long.

   13) Missing peer put on error in rxrpc, from David Howells.

   14) Fix pedit in nfp driver, from Pieter Jansen van Vuuren.

   15) Fix overflowing shift statement in qla3xxx driver, from Nathan
       Chancellor.

   16) Fix Spectre v1 in ptp code, from Gustavo A. R. Silva.

   17) udp6_unicast_rcv_skb() interprets udpv6_queue_rcv_skb() return
       value in an inverted manner, fix from Paolo Abeni.

   18) Fix missed unresolved entries in ipmr dumps, from Nikolay
       Aleksandrov.

   19) Fix NAPI handling under high load, we can completely miss events
       when NAPI has to loop more than one time in a cycle.  From Heiner
       Kallweit."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
  ip6_tunnel: Fix encapsulation layout
  tipc: fix info leak from kernel tipc_event
  net: socket: fix a missing-check bug
  net: sched: Fix for duplicate class dump
  r8169: fix NAPI handling under high load
  net: ipmr: fix unresolved entry dumps
  net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()
  sctp: fix the data size calculation in sctp_data_size
  virtio_net: avoid using netif_tx_disable() for serializing tx routine
  udp6: fix encap return code for resubmitting
  mlxsw: core: Fix use-after-free when flashing firmware during init
  sctp: not free the new asoc when sctp_wait_for_connect returns err
  sctp: fix race on sctp_id2asoc
  r8169: re-enable MSI-X on RTL8168g
  net: bpfilter: use get_pid_task instead of pid_task
  ptp: fix Spectre v1 vulnerability
  net: qla3xxx: Remove overflowing shift statement
  geneve, vxlan: Don't set exceptions if skb->len < mtu
  geneve, vxlan: Don't check skb_dst() twice
  sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead
  ...

David writes:
  "Sparc fixes:

   The main bit here is fixing how fallback system calls are handled in
   the sparc vDSO.

   Unfortunately, I fat fingered the commit and some perf debugging
   hacks slipped into the vDSO fix, which I revert in the very next
   commit."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Revert unintended perf changes.
  sparc: vDSO: Silence an uninitialized variable warning
  sparc: Fix syscall fallback bugs in VDSO.

Dave writes:
  "drm fixes for 4.19 final

   Just a last set of misc core fixes for final.

   4 fixes, one use after free, one fb integration fix, one EDID fix,
   and one laptop panel quirk,"

* tag 'drm-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drm:
  drm/edid: VSDB yCBCr420 Deep Color mode bit definitions
  drm: fix use of freed memory in drm_mode_setcrtc
  drm: fb-helper: Reject all pixel format changing requests
  drm/edid: Add 6 bpc quirk for BOE panel in HP Pavilion 15-n233sl

Doug writes:
  "Really final for-rc pull request for 4.19

   Ok, so last week I thought we had sent our final pull request for
   4.19.  Well, wouldn't ya know someone went and found a couple Spectre
   v1 fixes were needed :-/.  So, a couple *very* small specter patches
   for this (hopefully) final -rc week."

* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/ucma: Fix Spectre v1 vulnerability
  IB/ucm: Fix Spectre v1 vulnerability

drm-misc-fixes for v4.19:
- Fix use of freed memory in drm_mode_setcrtc.
- Reject pixel format changing requests in fb helper.
- Add 6 bpc quirk for HP Pavilion 15-n233sl
- Fix VSDB yCBCr420 Deep Color mode bit definitions
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/647fe5d0-4ec5-57cc-9f23-a4836b29e278@linux.intel.com

Trivial fix to spelling mistake in DP_INFO message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2018-10-18

This series provides misc updates to mlx5 core and netdevice driver.

1) From Tariq Toukan: Refactor fragmented buffer struct fields and init flow.

2) From Vlad Buslov, Flow counters cache improvements and fixes follow up.
as a follow up work for the previous series of the mlx5 flow counters,
Vlad provides two fixes:
  2.1) Take fs_counters dellist before addlist
Fixes: 6e5e2283 ("net/mlx5: Add new list to store deleted flow counters")
  2.2) Remove counter from idr after removing it from list
Fixes: 12d6066c ("net/mlx5: Add flow counters idr")

From Shay Agroskin,
3) Add FEC set/get FW commands and FEC ethtool callbacks support
4) Add new ethtool statistics to cover errors on rx, such as FEC errors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 058214a4 ("ip6_tun: Add infrastructure for doing
encapsulation") added the ip6_tnl_encap() call in ip6_tnl_xmit(), before
the call to ipv6_push_frag_opts() to append the IPv6 Tunnel Encapsulation
Limit option (option 4, RFC 2473, par. 5.1) to the outer IPv6 header.

As long as the option didn't actually end up in generated packets, this
wasn't an issue. Then commit 89a23c8b ("ip6_tunnel: Fix missing tunnel
encapsulation limit option") fixed sending of this option, and the
resulting layout, e.g. for FoU, is:

.-------------------.------------.----------.-------------------.----- - -
| Outer IPv6 Header | UDP header | Option 4 | Inner IPv6 Header | Payload
'-------------------'------------'----------'-------------------'----- - -

Needless to say, FoU and GUE (at least) won't work over IPv6. The option
is appended by default, and I couldn't find a way to disable it with the
current iproute2.

Turn this into a more reasonable:

.-------------------.----------.------------.-------------------.----- - -
| Outer IPv6 Header | Option 4 | UDP header | Inner IPv6 Header | Payload
'-------------------'----------'------------'-------------------'----- - -

With this, and with 84dad559 ("udp6: fix encap return code for
resubmitting"), FoU and GUE work again over IPv6.

Fixes: 058214a4 ("ip6_tun: Add infrastructure for doing encapsulation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrey reported the following warning triggered while running CRIU tests:

tcp_clean_rtx_queue()
...
	last_ackt = tcp_skb_timestamp_us(skb);
	WARN_ON_ONCE(last_ackt == 0);

This is caused by 5f6188a8 ("tcp: do not change tcp_wstamp_ns
in tcp_mstamp_refresh"), as we end up having skbs in retransmit queue
with a zero skb->skb_mstamp_ns field.

We could fix this bug in different ways, like making sure
tp->tcp_wstamp_ns is not zero at socket creation, but as Neal pointed
out, we also do not want that pacing status of a repaired socket
could push tp->tcp_wstamp_ns far ahead in the future.

So we prefer changing tcp_write_xmit() to not call tcp_update_skb_after_send()
and instead do what is requested by TCP_REPAIR logic.

Fixes: 5f6188a8 ("tcp: do not change tcp_wstamp_ns in tcp_mstamp_refresh")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We initialize a struct tipc_event allocated on the kernel stack to
zero to avert info leak to user space.

Reported-by: syzbot+057458894bc8cada4dee@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds checksum offload and TSO support for the HiNIC
driver. Perfomance test (Iperf) shows more than 100% improvement
in TCP streams.
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: Xue Chaojing <xuechaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In ethtool_ioctl(), the ioctl command 'ethcmd' is checked through a switch
statement to see whether it is necessary to pre-process the ethtool
structure, because, as mentioned in the comment, the structure
ethtool_rxnfc is defined with padding. If yes, a user-space buffer 'rxnfc'
is allocated through compat_alloc_user_space(). One thing to note here is
that, if 'ethcmd' is ETHTOOL_GRXCLSRLALL, the size of the buffer 'rxnfc' is
partially determined by 'rule_cnt', which is actually acquired from the
user-space buffer 'compat_rxnfc', i.e., 'compat_rxnfc->rule_cnt', through
get_user(). After 'rxnfc' is allocated, the data in the original user-space
buffer 'compat_rxnfc' is then copied to 'rxnfc' through copy_in_user(),
including the 'rule_cnt' field. However, after this copy, no check is
re-enforced on 'rxnfc->rule_cnt'. So it is possible that a malicious user
race to change the value in the 'compat_rxnfc->rule_cnt' between these two
copies. Through this way, the attacker can bypass the previous check on
'rule_cnt' and inject malicious data. This can cause undefined behavior of
the kernel and introduce potential security risk.

This patch avoids the above issue via copying the value acquired by
get_user() to 'rxnfc->rule_cn', if 'ethcmd' is ETHTOOL_GRXCLSRLALL.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

On multi adapter setup if the uld registration fails even on
one adapter, the allocated resources for the uld on all the
adapters are freed, rendering the functioning adapters unusable.

This commit fixes the issue by freeing the allocated resources
only for the failed adapter.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When dumping classes by parent, kernel would return classes twice:

| # tc qdisc add dev lo root prio
| # tc class show dev lo
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
| # tc class show dev lo parent 8001:
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:

This comes from qdisc_match_from_root() potentially returning the root
qdisc itself if its handle matched. Though in that case, root's classes
were already dumped a few lines above.

Fixes: cb395b20 ("net: sched: optimize class dumps")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The struct type was copied from the line before but it should be "tx"
instead of "rx".  I have reviewed the code and I can't immediately see
that this bug causes a runtime issue.

Fixes: 36e53349 ("bnxt_en: Add additional extended port statistics.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Doc Updates 2018-10-18

This series contains documentation fixes and updates for Intel wired
LAN drivers.

The following was done:
 - Updated incorrect URLs
 - removed document references which did not apply to the current
   in-kernel drivers
 - added documentation for fm10k driver
 - added missing documentation on existing or new features
 - added SPDX headers to all the documentation files

Lastly, the documentation was converted over to the RST (reStructured
Text) format, so that 'make htmldocs' produces pretty html driver
documentation for our drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang warns:

drivers/atm/zatm.c:513:7: error: while loop has empty body
[-Werror,-Wempty-body]
        zwait;
             ^
drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to
silence this warning

Get rid of this warning by using an empty do-while loop. While we're at
it, add parentheses to make it clear that this is a function-like macro.

Link: https://github.com/ClangBuiltLinux/linux/issues/42Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang warns:

drivers/atm/eni.c:244:48: error: for loop has empty body
[-Werror,-Wempty-body]
        for (order = 0; (1 << order) < *size; order++);
                                                      ^
drivers/atm/eni.c:244:48: note: put the semicolon on a separate line to
silence this warning

In this case, that loop is expected to be empty so silence the warning
in the way that Clang suggests.

Link: https://github.com/ClangBuiltLinux/linux/issues/42Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update Shrijeet's email address for the VRF entry.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These are counters for errors received on rx side, such as
FEC errors.
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Added "Per lane raw errors" capability bit in
Ports Capabilities Mask (PCAM) enhanced features
layout.

This bit determines if the fields "phy_raw_errors_laneX"
in "Physical Layer statistical" counters group are supported.
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Driver callback function for 'ethtool --show-fec',
'ethtool --set-fec' commands.

The query function returns active and configured FEC policy
for current link speed.

The set function sets FEC policy for all supported link
speeds.
1) If current link speed doesn't support requested FEC policy,
   the function fails.
2) If a different link speed doesn't support requested FEC
   policy, FEC capbilities for this speed are turned off.
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Added functions to query and set link FEC policy.
To get/set FEC capabilities in PPLM reg we need to query
current link speed.
'mlx5_get_fec_speed_field' queries current link speed and returns
correct field offset.

FEC Query's return value is divided into 'active FEC policy', which is
the FEC policy used by the link, and 'configured FEC policy', which
is the FEC policy requested by the user.
The two values may differ if:
1) FEC policy was configured to 'auto',
   in which case the active FEC policy would be the default FEC policy
   for current link speed.

2) FEC policy was changed, but no link reset is performed. In which case,
   the active FEC policy would become the configured one after a link
   reset.

FEC set function sets FEC policy for all link speeds and perform link
reset.
1) If current link speed doesn't support requested FEC policy,
   the function fails.
2) If a different link speed doesn't support requested FEC policy,
   FEC capbilities for this speed are turned off and a warning message
   is printed.
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Added FEC related fields to PPLM layout.
These fields are needed to set and query FEC policy
for different link speeds.
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>