[ Upstream commit 63a41746 ]

When rmmod hip04_eth.ko, we can get the following warning:

Task track: rmmod(1623)>bash(1591)>login(1581)>init(1)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1623 at kernel/irq/manage.c:1557 __free_irq+0xa4/0x2ac()
Trying to free already-free IRQ 200
Modules linked in: ping(O) pramdisk(O) cpuinfo(O) rtos_snapshot(O) interrupt_ctrl(O) mtdblock mtd_blkdevrtfs nfs_acl nfs lockd grace sunrpc xt_tcpudp ipt_REJECT iptable_filter ip_tables x_tables nf_reject_ipv
CPU: 0 PID: 1623 Comm: rmmod Tainted: G           O    4.4.193 #1
Hardware name: Hisilicon A15
[<c020b408>] (rtos_unwind_backtrace) from [<c0206624>] (show_stack+0x10/0x14)
[<c0206624>] (show_stack) from [<c03f2be4>] (dump_stack+0xa0/0xd8)
[<c03f2be4>] (dump_stack) from [<c021a780>] (warn_slowpath_common+0x84/0xb0)
[<c021a780>] (warn_slowpath_common) from [<c021a7e8>] (warn_slowpath_fmt+0x3c/0x68)
[<c021a7e8>] (warn_slowpath_fmt) from [<c026876c>] (__free_irq+0xa4/0x2ac)
[<c026876c>] (__free_irq) from [<c0268a14>] (free_irq+0x60/0x7c)
[<c0268a14>] (free_irq) from [<c0469e80>] (release_nodes+0x1c4/0x1ec)
[<c0469e80>] (release_nodes) from [<c0466924>] (__device_release_driver+0xa8/0x104)
[<c0466924>] (__device_release_driver) from [<c0466a80>] (driver_detach+0xd0/0xf8)
[<c0466a80>] (driver_detach) from [<c0465e18>] (bus_remove_driver+0x64/0x8c)
[<c0465e18>] (bus_remove_driver) from [<c02935b0>] (SyS_delete_module+0x198/0x1e0)
[<c02935b0>] (SyS_delete_module) from [<c0202ed0>] (__sys_trace_return+0x0/0x10)
---[ end trace bb25d6123d849b44 ]---

Currently "rmmod hip04_eth.ko" call free_irq more than once
as devres_release_all and hip04_remove both call free_irq.
This results in a 'Trying to free already-free IRQ' warning.
To solve the problem free_irq has been moved out of hip04_remove.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 85ac30fa ]

In the highly unlikely event that we fail to allocate either of the
"/txrx" or "/control" workqueues, we should bail cleanly rather than
blindly march on with NULL queue pointer(s) installed in the
'fjes_adapter' instance.

Cc: "David S. Miller" <davem@davemloft.net>
Reported-by: Nicolas Waisman <nico@semmle.com>
Link: https://lore.kernel.org/lkml/CADJ_3a8WFrs5NouXNqS5WYe7rebFP+_A5CheeqAyD_p7DFJJcg@mail.gmail.com/Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit af8fd042 ]

The following scenario results in an IO hang:
1) ctrl completes a request with NVME_SC_ANA_TRANSITION.
   NVME_NS_ANA_PENDING bit in ns->flags is set and ana_work is triggered.
2) ana_work: nvme_read_ana_log() tries to get the ANA log page from the ctrl.
   This fails because ctrl disconnects.
   Therefore nvme_update_ns_ana_state() is not called
   and NVME_NS_ANA_PENDING bit in ns->flags is not cleared.
3) ctrl reconnects: nvme_mpath_init(ctrl,...) calls
   nvme_read_ana_log(ctrl, groups_only=true).
   However, nvme_update_ana_state() does not update namespaces
   because nr_nsids = 0 (due to groups_only mode).
4) scan_work calls nvme_validate_ns() finds the ns and re-validates OK.

Result:
The ctrl is now live but NVME_NS_ANA_PENDING bit in ns->flags is still set.
Consequently ctrl will never be considered a viable path by __nvme_find_path().
IO will hang if ctrl is the only or the last path to the namespace.

More generally, while ctrl is reconnecting, its ANA state may change.
And because nvme_mpath_init() requests ANA log in groups_only mode,
these changes are not propagated to the existing ctrl namespaces.
This may result in a mal-function or an IO hang.

Solution:
nvme_mpath_init() will nvme_read_ana_log() with groups_only set to false.
This will not harm the new ctrl case (no namespaces present),
and will make sure the ANA state of namespaces gets updated after reconnect.

Note: Another option would be for nvme_mpath_init() to invoke
nvme_parse_ana_log(..., nvme_set_ns_ana_state) for each existing namespace.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d3566abb ]

In shutdown/reboot paths, the timer is not stopped:

  qla2x00_shutdown
  pci_device_shutdown
  device_shutdown
  kernel_restart_prepare
  kernel_restart
  sys_reboot

This causes lockups (on powerpc) when firmware config space access calls
are interrupted by smp_send_stop later in reboot.

Fixes: e30d1756 ("[SCSI] qla2xxx: Addition of shutdown callback handler.")
Link: https://lore.kernel.org/r/20191024063804.14538-1-npiggin@gmail.comSigned-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b681a052 ]

eq->buf_list->buf and eq->buf_list should also be freed when eqe_hop_num
is set to 0, or there will be memory leaks.

Fixes: a5073d60 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/1572072995-11277-3-git-send-email-liweihang@hisilicon.comSigned-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d4934f45 ]

_put_ep_safe() and _put_pass_ep_safe() free the skb before it is freed by
process_work(). fix double free by freeing the skb only in process_work().

Fixes: 1dad0ebe ("iw_cxgb4: Avoid touch after free error in ARP failure handlers")
Link: https://lore.kernel.org/r/1572006880-5800-1-git-send-email-bharat@chelsio.comSigned-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 28df0642 ]

This isn't really accurate right. fread() doesn't always
return 0 in error. It could return < number of elements
and set errno.
Signed-off-by: GwanYeong Kim <gy741.kim@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191018032223.4644-1-gy741.kim@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 88f6bf38 ]

A recent info-leak bug manifested itself along with warning about a
negative buffer overflow:

	ldusb 1-1:0.28: Read buffer overflow, -131383859965943 bytes dropped

when it was really a rather large positive one.

A sanity check that prevents this has now been put in place, but let's
fix up the size format specifiers, which should all be unsigned.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191022143203.5260-3-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d482c7bb ]

Endpoints with a maxpacket length of 0 are probably useless.  They
can't transfer any data, and it's not at all unlikely that an HCD will
crash or hang when trying to handle an URB for such an endpoint.

Currently the USB core does not check for endpoints having a maxpacket
value of 0.  This patch adds a check, printing a warning and skipping
over any endpoints it catches.

Now, the USB spec does not rule out endpoints having maxpacket = 0.
But since they wouldn't have any practical use, there doesn't seem to
be any good reason for us to accept them.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>

Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281050420.1485-100000@iolanthe.rowland.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 75be6f70 ]

The events in the same group don't start or stop simultaneously.
Here is the ftrace when enabling event group for uncore_iio_0:

  # perf stat -e "{uncore_iio_0/event=0x1/,uncore_iio_0/event=0xe/}"

            <idle>-0     [000] d.h.  8959.064832: read_msr: a41, value
  b2b0b030		//Read counter reg of IIO unit0 counter0
            <idle>-0     [000] d.h.  8959.064835: write_msr: a48, value
  400001			//Write Ctrl reg of IIO unit0 counter0 to enable
  counter0. <------ Although counter0 is enabled, Unit Ctrl is still
  freezed. Nothing will count. We are still good here.
            <idle>-0     [000] d.h.  8959.064836: read_msr: a40, value
  30100                   //Read Unit Ctrl reg of IIO unit0
            <idle>-0     [000] d.h.  8959.064838: write_msr: a40, value
  30000			//Write Unit Ctrl reg of IIO unit0 to enable all
  counters in the unit by clear Freeze bit  <------Unit0 is un-freezed.
  Counter0 has been enabled. Now it starts counting. But counter1 has not
  been enabled yet. The issue starts here.
            <idle>-0     [000] d.h.  8959.064846: read_msr: a42, value 0
			//Read counter reg of IIO unit0 counter1
            <idle>-0     [000] d.h.  8959.064847: write_msr: a49, value
  40000e			//Write Ctrl reg of IIO unit0 counter1 to enable
  counter1.   <------ Now, counter1 just starts to count. Counter0 has
  been running for a while.

Current code un-freezes the Unit Ctrl right after the first counter is
enabled. The subsequent group events always loses some counter values.

Implement pmu_enable and pmu_disable support for uncore, which can help
to batch hardware accesses.

No one uses uncore_enable_box and uncore_disable_box. Remove them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-drivers-review@eclists.intel.com
Cc: linux-perf@eclists.intel.com
Fixes: 087bfbb0 ("perf/x86: Add generic Intel uncore PMU support")
Link: https://lkml.kernel.org/r/1572014593-31591-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e431e79b ]

This saves us writing the IBS control MSR twice when disabling the
event.

I searched revision guides for all families since 10h, and did not
find occurrence of erratum #420, nor anything remotely similar:
so we isolate the secondary MSR write to family 10h only.

Also unconditionally update the count mask for IBS Op implementations
that have read & writeable current count (CurCnt) fields in addition
to the MaxCnt field.  These bits were reserved on prior
implementations, and therefore shouldn't have negative impact.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: c9574fe0 ("perf/x86-ibs: Implement workaround for IBS erratum #420")
Link: https://lkml.kernel.org/r/20191023150955.30292-2-kim.phillips@amd.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 317b96bb ]

The loop that reads all the IBS MSRs into *buf stopped one MSR short of
reading the IbsOpData register, which contains the RipInvalid status bit.

Fix the offset_max assignment so the MSR gets read, so the RIP invalid
evaluation is based on what the IBS h/w output, instead of what was
left in memory.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: d47e8238 ("perf/x86-ibs: Take instruction pointer from ibs sample")
Link: https://lkml.kernel.org/r/20191023150955.30292-1-kim.phillips@amd.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a7d9874c ]

layerscape board sometimes reported some usb call trace, that is due to
kernel sent LPM tokerns automatically when it has no pending transfers
and think that the link is idle enough to enter L1, which procedure will
ask usb register has a recovery,then kernel will compare USBx_GFLADJ and
set GFLADJ_30MHZ, GFLADJ_30MHZ_REG until GFLADJ_30MHZ is equal 0x20, if
the conditions were met then issue occur, but whatever the conditions
whether were met that usb is all need keep GFLADJ_30MHZ of value is 0x20
(xhci spec ask use GFLADJ_30MHZ to adjust any offset from clock source
that generates the clock that drives the SOF counter, 0x20 is default
value of it)That is normal logic, so need remove the call trace.
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1a1c851b ]

We meet several NULL pointer issues if configfs_composite_unbind
and composite_setup (or composite_disconnect) are running together.
These issues occur when do the function switch stress test, the
configfs_compsoite_unbind is called from user mode by
echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt
or disconnect interrupt occurs by hardware. The composite_setup
will get the cdev from get_gadget_data, but configfs_composite_unbind
will set gadget data as NULL, so the NULL pointer issue occurs.
This concurrent is hard to reproduce by native kernel, but can be
reproduced by android kernel.

In this commit, we introduce one spinlock belongs to structure
gadget_info since we can't use the same spinlock in usb_composite_dev
due to exclusive running together between composite_setup and
configfs_composite_unbind. And one bit flag 'unbind' to indicate the
code is at unbind routine, this bit is needed due to we release the
lock at during configfs_composite_unbind sometimes, and composite_setup
may be run at that time.

Several oops:

oops 1:
android_work: sent uevent USB_STATE=CONNECTED
configfs-gadget gadget: super-speed config #1: b
android_work: sent uevent USB_STATE=CONFIGURED
init: Received control message 'start' for 'adbd' from pid: 3515 (system_server)
Unable to handle kernel NULL pointer dereference at virtual address 0000002a
init: Received control message 'stop' for 'adbd' from pid: 3375 (/vendor/bin/hw/android.hardware.usb@1.1-servic)
Mem abort info:
  Exception class = DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgd = ffff8008f1b7f000
[000000000000002a] *pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 4 PID: 2457 Comm: irq/125-5b11000 Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2a98000 task.stack: ffff00000b7b8000
PC is at composite_setup+0x44/0x1508
LR is at android_setup+0xb8/0x13c
pc : [<ffff0000089ffb3c>] lr : [<ffff000008a032fc>] pstate: 800001c5
sp : ffff00000b7bbb80
x29: ffff00000b7bbb80 x28: ffff8008f2a3c010
x27: 0000000000000001 x26: 0000000000000000                                                          [1232/1897]
audit: audit_lost=25791 audit_rate_limit=5 audit_backlog_limit=64
x25: 00000000ffffffa1 x24: ffff8008f2a3c010
audit: rate limit exceeded
x23: 0000000000000409 x22: ffff000009c8e000
x21: ffff8008f7a8b428 x20: ffff00000afae000
x19: ffff0000089ff000 x18: 0000000000000000
x17: 0000000000000000 x16: ffff0000082b7c9c
x15: 0000000000000000 x14: f1866f5b952aca46
x13: e35502e30d44349c x12: 0000000000000008
x11: 0000000000000008 x10: 0000000000000a30
x9 : ffff00000b7bbd00 x8 : ffff8008f2a98a90
x7 : ffff8008f27a9c90 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000001
x3 : 0000000000000000 x2 : 0000000000000006
x1 : ffff0000089ff8d0 x0 : 732a010310b9ed00

X7: 0xffff8008f27a9c10:
9c10  00000002 00000000 00000001 00000000 13110000 ffff0000 00000002 00208040
9c30  00000000 00000000 00000000 00000000 00000000 00000005 00000029 00000000
9c50  00051778 00000001 f27a8e00 ffff8008 00000005 00000000 00000078 00000078
9c70  00000078 00000000 09031d48 ffff0000 00100000 00000000 00400000 00000000
9c90  00000001 00000000 00000000 00000000 00000000 00000000 ffefb1a0 ffff8008
9cb0  f27a9ca8 ffff8008 00000000 00000000 b9d88037 00000173 1618a3eb 00000001
9cd0  870a792a 0000002e 16188fe6 00000001 0000242b 00000000 00000000 00000000
using random self ethernet address
9cf0  019a4646 00000000 000547f3 00000000 ecfd6c33 00000002 00000000
using random host ethernet address
 00000000

X8: 0xffff8008f2a98a10:
8a10  00000000 00000000 f7788d00 ffff8008 00000001 00000000 00000000 00000000
8a30  eb218000 ffff8008 f2a98000 ffff8008 f2a98000 ffff8008 09885000 ffff0000
8a50  f34df480 ffff8008 00000000 00000000 f2a98648 ffff8008 09c8e000 ffff0000
8a70  fff2c800 ffff8008 09031d48 ffff0000 0b7bbd00 ffff0000 0b7bbd00 ffff0000
8a90  080861bc ffff0000 00000000 00000000 00000000 00000000 00000000 00000000
8ab0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8ad0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8af0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

X21: 0xffff8008f7a8b3a8:
b3a8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3c8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3e8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b408  00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000
b428  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b448  0053004d 00540046 00300031 00010030 eb07b520 ffff8008 20011201 00000003
b468  e418d109 0104404e 00010302 00000000 eb07b558 ffff8008 eb07b558 ffff8008
b488  f7a8b488 ffff8008 f7a8b488 ffff8008 f7a8b300 ffff8008 00000000 00000000

X24: 0xffff8008f2a3bf90:
bf90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010  00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030  f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050  f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070  f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008

X28: 0xffff8008f2a3bf90:
bf90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010  00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030  f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050  f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070  f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008

Process irq/125-5b11000 (pid: 2457, stack limit = 0xffff00000b7b8000)
Call trace:
Exception stack(0xffff00000b7bba40 to 0xffff00000b7bbb80)
ba40: 732a010310b9ed00 ffff0000089ff8d0 0000000000000006 0000000000000000
ba60: 0000000000000001 0000000000000000 0000000000000001 ffff8008f27a9c90
ba80: ffff8008f2a98a90 ffff00000b7bbd00 0000000000000a30 0000000000000008
baa0: 0000000000000008 e35502e30d44349c f1866f5b952aca46 0000000000000000
bac0: ffff0000082b7c9c 0000000000000000 0000000000000000 ffff0000089ff000
bae0: ffff00000afae000 ffff8008f7a8b428 ffff000009c8e000 0000000000000409
bb00: ffff8008f2a3c010 00000000ffffffa1 0000000000000000 0000000000000001
bb20: ffff8008f2a3c010 ffff00000b7bbb80 ffff000008a032fc ffff00000b7bbb80
bb40: ffff0000089ffb3c 00000000800001c5 ffff00000b7bbb80 732a010310b9ed00
bb60: ffffffffffffffff ffff0000080f777c ffff00000b7bbb80 ffff0000089ffb3c
[<ffff0000089ffb3c>] composite_setup+0x44/0x1508
[<ffff000008a032fc>] android_setup+0xb8/0x13c
[<ffff0000089bd9a8>] cdns3_ep0_delegate_req+0x44/0x70
[<ffff0000089bdff4>] cdns3_check_ep0_interrupt_proceed+0x33c/0x654
[<ffff0000089bca44>] cdns3_device_thread_irq_handler+0x4b0/0x4bc
[<ffff0000089b77b4>] cdns3_thread_irq+0x48/0x68
[<ffff000008145bf0>] irq_thread_fn+0x28/0x88
[<ffff000008145e38>] irq_thread+0x13c/0x228
[<ffff0000080fed70>] kthread+0x104/0x130
[<ffff000008085064>] ret_from_fork+0x10/0x18

oops2:
composite_disconnect: Calling disconnect on a Gadget that is                      not connected
android_work: did not send uevent (0 0           (null))
init: Received control message 'stop' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx)
init: Sending signal 9 to service 'adbd' (pid 22343) process group...
------------[ cut here ]------------
audit: audit_lost=180038 audit_rate_limit=5 audit_backlog_limit=64
audit: rate limit exceeded
WARNING: CPU: 0 PID: 3468 at kernel_imx/drivers/usb/gadget/composite.c:2009 composite_disconnect+0x80/0x88
Modules linked in:
CPU: 0 PID: 3468 Comm: HWC-UEvent-Thre Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2349c00 task.stack: ffff00000b0a8000
PC is at composite_disconnect+0x80/0x88
LR is at composite_disconnect+0x80/0x88
pc : [<ffff0000089ff9b0>] lr : [<ffff0000089ff9b0>] pstate: 600001c5
sp : ffff000008003dd0
x29: ffff000008003dd0 x28: ffff8008f2349c00
x27: ffff000009885018 x26: ffff000008004000
Timeout for IPC response!
x25: ffff000009885018 x24: ffff000009c8e280
x23: ffff8008f2d98010 x22: 00000000000001c0
x21: ffff8008f2d98394 x20: ffff8008f2d98010
x19: 0000000000000000 x18: 0000e3956f4f075a
fxos8700 4-001e: i2c block read acc failed
x17: 0000e395735727e8 x16: ffff00000829f4d4
x15: ffffffffffffffff x14: 7463656e6e6f6320
x13: 746f6e2009090920 x12: 7369207461687420
x11: 7465676461472061 x10: 206e6f207463656e
x9 : 6e6f637369642067 x8 : ffff000009c8e280
x7 : ffff0000086ca6cc x6 : ffff000009f15e78
x5 : 0000000000000000 x4 : 0000000000000000
x3 : ffffffffffffffff x2 : c3f28b86000c3900
x1 : c3f28b86000c3900 x0 : 000000000000004e

X20: 0xffff8008f2d97f90:
7f90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
libprocessgroup: Failed to kill process cgroup uid 0 pid 22343 in 215ms, 1 processes remain
7fd0
Timeout for IPC response!
 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
using random self ethernet address
7ff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010  00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc
using random host ethernet address
 ffff0000
8030  f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050  f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070  f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008

X21: 0xffff8008f2d98314:
8314  ffff8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8334  00000000 00000000 00000000 00000000 00000000 08a04cf4 ffff0000 00000000
8354  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8374  00000000 00000000 00000000 00001001 00000000 00000000 00000000 00000000
8394  e4bbe4bb 0f230000 ffff0000 0afae000 ffff0000 ae001000 00000000 f206d400
Timeout for IPC response!
83b4  ffff8008 00000000 00000000 f7957b18 ffff8008 f7957718 ffff8008 f7957018
83d4  ffff8008 f7957118 ffff8008 f7957618 ffff8008 f7957818 ffff8008 f7957918
83f4  ffff8008 f7957d18 ffff8008 00000000 00000000 00000000 00000000 00000000

X23: 0xffff8008f2d97f90:
7f90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fd0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7ff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010  00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc ffff0000
8030  f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050  f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070  f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008

X28: 0xffff8008f2349b80:
9b80  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9ba0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9bc0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9be0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9c00  00000022 00000000 ffffffff ffffffff 00010001 00000000 00000000 00000000
9c20  0b0a8000 ffff0000 00000002 00404040 00000000 00000000 00000000 00000000
9c40  00000001 00000000 00000001 00000000 001ebd44 00000001 f390b800 ffff8008
9c60  00000000 00000001 00000070 00000070 00000070 00000000 09031d48 ffff0000

Call trace:
Exception stack(0xffff000008003c90 to 0xffff000008003dd0)
3c80:                                   000000000000004e c3f28b86000c3900
3ca0: c3f28b86000c3900 ffffffffffffffff 0000000000000000 0000000000000000
3cc0: ffff000009f15e78 ffff0000086ca6cc ffff000009c8e280 6e6f637369642067
3ce0: 206e6f207463656e 7465676461472061 7369207461687420 746f6e2009090920
3d00: 7463656e6e6f6320 ffffffffffffffff ffff00000829f4d4 0000e395735727e8
3d20: 0000e3956f4f075a 0000000000000000 ffff8008f2d98010 ffff8008f2d98394
3d40: 00000000000001c0 ffff8008f2d98010 ffff000009c8e280 ffff000009885018
3d60: ffff000008004000 ffff000009885018 ffff8008f2349c00 ffff000008003dd0
3d80: ffff0000089ff9b0 ffff000008003dd0 ffff0000089ff9b0 00000000600001c5
3da0: ffff8008f33f2cd8 0000000000000000 0000ffffffffffff 0000000000000000
init: Received control message 'start' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx)
3dc0: ffff000008003dd0 ffff0000089ff9b0
[<ffff0000089ff9b0>] composite_disconnect+0x80/0x88
[<ffff000008a044d4>] android_disconnect+0x3c/0x68
[<ffff0000089ba9f8>] cdns3_device_irq_handler+0xfc/0x2c8
[<ffff0000089b84c0>] cdns3_irq+0x44/0x94
[<ffff00000814494c>] __handle_irq_event_percpu+0x60/0x24c
[<ffff000008144c0c>] handle_irq_event+0x58/0xc0
[<ffff00000814873c>] handle_fasteoi_irq+0x98/0x180
[<ffff000008143a10>] generic_handle_irq+0x24/0x38
[<ffff000008144170>] __handle_domain_irq+0x60/0xac
[<ffff0000080819c4>] gic_handle_irq+0xd4/0x17c
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9bbfceea ]

In dwc3_pci_probe a call to platform_device_alloc allocates a device
which is correctly put in case of error except one case: when the call to
platform_device_add_properties fails it directly returns instead of
going to error handling. This commit replaces return with the goto.

Fixes: 1a7b12f6 ("usb: dwc3: pci: Supply device properties via driver data")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1c20c89b ]

composite_dev_cleanup call from the failure of configfs_composite_bind
frees up the cdev->os_desc_req and cdev->req. If the previous calls of
bind and unbind is successful these will carry stale values.

Consider the below sequence of function calls:
configfs_composite_bind()
        composite_dev_prepare()
                - Allocate cdev->req, cdev->req->buf
        composite_os_desc_req_prepare()
                - Allocate cdev->os_desc_req, cdev->os_desc_req->buf
configfs_composite_unbind()
        composite_dev_cleanup()
                - free the cdev->os_desc_req->buf and cdev->req->buf
Next composition switch
configfs_composite_bind()
        - If it fails goto err_comp_cleanup will call the
	  composite_dev_cleanup() function
        composite_dev_cleanup()
	        - calls kfree up with the stale values of cdev->req->buf and
		  cdev->os_desc_req from the previous configfs_composite_bind
		  call. The free call on these stale values leads to double free.

Hence, Fix this issue by setting request and buffer pointer to NULL after
kfree.
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ba3a1a91 ]

Fix interrupt storm generated by endpoints when working in FIFO mode.
The TX_COMPLETE interrupt is used only by control endpoints processing.
Do not enable it for other types of endpoints.

Fixes: 914a3f3b ("USB: add atmel_usba_udc driver")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bc1e3a2d ]

Check memory resource existence before releasing it to avoid NULL
pointer dereference
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2bce1ebe ]

When a macsec interface is created, it increases a refcnt to a lower
device(real device). when macsec interface is deleted, the refcnt is
decreased in macsec_free_netdev(), which is ->priv_destructor() of
macsec interface.

The problem scenario is this.
When nested macsec interfaces are exiting, the exit routine of the
macsec module makes refcnt leaks.

Test commands:
    ip link add dummy0 type dummy
    ip link add macsec0 link dummy0 type macsec
    ip link add macsec1 link macsec0 type macsec
    modprobe -rv macsec

[  208.629433] unregister_netdevice: waiting for macsec0 to become free. Usage count = 1

Steps of exit routine of macsec module are below.
1. Calls ->dellink() in __rtnl_link_unregister().
2. Checks refcnt and wait refcnt to be 0 if refcnt is not 0 in
netdev_run_todo().
3. Calls ->priv_destruvtor() in netdev_run_todo().

Step2 checks refcnt, but step3 decreases refcnt.
So, step2 waits forever.

This patch makes the macsec module do not hold a refcnt of the lower
device because it already holds a refcnt of the lower device with
netdev_upper_dev_link().

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 65de65d9 ]

The IFF_BONDING means bonding master or bonding slave device.
->ndo_add_slave() sets IFF_BONDING flag and ->ndo_del_slave() unsets
IFF_BONDING flag.

bond0<--bond1

Both bond0 and bond1 are bonding device and these should keep having
IFF_BONDING flag until they are removed.
But bond1 would lose IFF_BONDING at ->ndo_del_slave() because that routine
do not check whether the slave device is the bonding type or not.
This patch adds the interface type check routine before removing
IFF_BONDING flag.

Test commands:
    ip link add bond0 type bond
    ip link add bond1 type bond
    ip link set bond1 master bond0
    ip link set bond1 nomaster
    ip link del bond1 type bond
    ip link add bond1 type bond

Splat looks like:
[  226.665555] proc_dir_entry 'bonding/bond1' already registered
[  226.666440] WARNING: CPU: 0 PID: 737 at fs/proc/generic.c:361 proc_register+0x2a9/0x3e0
[  226.667571] Modules linked in: bonding af_packet sch_fq_codel ip_tables x_tables unix
[  226.668662] CPU: 0 PID: 737 Comm: ip Not tainted 5.4.0-rc3+ #96
[  226.669508] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  226.670652] RIP: 0010:proc_register+0x2a9/0x3e0
[  226.671612] Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 39 01 00 00 48 8b 04 24 48 89 ea 48 c7 c7 a0 0b 14 9f 48 8b b0 e
0 00 00 00 e8 07 e7 88 ff <0f> 0b 48 c7 c7 40 2d a5 9f e8 59 d6 23 01 48 8b 4c 24 10 48 b8 00
[  226.675007] RSP: 0018:ffff888050e17078 EFLAGS: 00010282
[  226.675761] RAX: dffffc0000000008 RBX: ffff88805fdd0f10 RCX: ffffffff9dd344e2
[  226.676757] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f6b8c
[  226.677751] RBP: ffff8880507160f3 R08: ffffed100d940019 R09: ffffed100d940019
[  226.678761] R10: 0000000000000001 R11: ffffed100d940018 R12: ffff888050716008
[  226.679757] R13: ffff8880507160f2 R14: dffffc0000000000 R15: ffffed100a0e2c1e
[  226.680758] FS:  00007fdc217cc0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[  226.681886] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  226.682719] CR2: 00007f49313424d0 CR3: 0000000050e46001 CR4: 00000000000606f0
[  226.683727] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  226.684725] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  226.685681] Call Trace:
[  226.687089]  proc_create_seq_private+0xb3/0xf0
[  226.687778]  bond_create_proc_entry+0x1b3/0x3f0 [bonding]
[  226.691458]  bond_netdev_event+0x433/0x970 [bonding]
[  226.692139]  ? __module_text_address+0x13/0x140
[  226.692779]  notifier_call_chain+0x90/0x160
[  226.693401]  register_netdevice+0x9b3/0xd80
[  226.694010]  ? alloc_netdev_mqs+0x854/0xc10
[  226.694629]  ? netdev_change_features+0xa0/0xa0
[  226.695278]  ? rtnl_create_link+0x2ed/0xad0
[  226.695849]  bond_newlink+0x2a/0x60 [bonding]
[  226.696422]  __rtnl_newlink+0xb9f/0x11b0
[  226.696968]  ? rtnl_link_unregister+0x220/0x220
[ ... ]

Fixes: 0b680e75 ("[PATCH] bonding: Add priv_flag to avoid event mishandling")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c24b75e0 ]

syzbot reported the following issue :

BUG: KCSAN: data-race in update_defense_level / update_defense_level

read to 0xffffffff861a6260 of 4 bytes by task 3006 on cpu 1:
 update_defense_level+0x621/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:177
 defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

write to 0xffffffff861a6260 of 4 bytes by task 7333 on cpu 0:
 update_defense_level+0xa62/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:205
 defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7333 Comm: kworker/0:5 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events defense_work_handler

Indeed, old_secure_tcp is currently a static variable, while it
needs to be a per netns variable.

Fixes: a0840e2e ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 62931f59 ]

if the IPVS module is removed while the sync daemon is starting, there is
a small gap where try_module_get() might fail getting the refcount inside
ip_vs_use_count_inc(). Then, the refcounts of IPVS module are unbalanced,
and the subsequent call to stop_sync_thread() causes the following splat:

 WARNING: CPU: 0 PID: 4013 at kernel/module.c:1146 module_put.part.44+0x15b/0x290
  Modules linked in: ip_vs(-) nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul ext4 mbcache jbd2 ghash_clmulni_intel snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev pcspkr snd_timer virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net net_failover virtio_blk failover virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ata_piix ttm crc32c_intel serio_raw drm virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nf_defrag_ipv6]
  CPU: 0 PID: 4013 Comm: modprobe Tainted: G        W         5.4.0-rc1.upstream+ #741
  Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
  RIP: 0010:module_put.part.44+0x15b/0x290
  Code: 04 25 28 00 00 00 0f 85 18 01 00 00 48 83 c4 68 5b 5d 41 5c 41 5d 41 5e 41 5f c3 89 44 24 28 83 e8 01 89 c5 0f 89 57 ff ff ff <0f> 0b e9 78 ff ff ff 65 8b 1d 67 83 26 4a 89 db be 08 00 00 00 48
  RSP: 0018:ffff888050607c78 EFLAGS: 00010297
  RAX: 0000000000000003 RBX: ffffffffc1420590 RCX: ffffffffb5db0ef9
  RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffc1420590
  RBP: 00000000ffffffff R08: fffffbfff82840b3 R09: fffffbfff82840b3
  R10: 0000000000000001 R11: fffffbfff82840b2 R12: 1ffff1100a0c0f90
  R13: ffffffffc1420200 R14: ffff88804f533300 R15: ffff88804f533ca0
  FS:  00007f8ea9720740(0000) GS:ffff888053800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f3245abe000 CR3: 000000004c28a006 CR4: 00000000001606f0
  Call Trace:
   stop_sync_thread+0x3a3/0x7c0 [ip_vs]
   ip_vs_sync_net_cleanup+0x13/0x50 [ip_vs]
   ops_exit_list.isra.5+0x94/0x140
   unregister_pernet_operations+0x29d/0x460
   unregister_pernet_device+0x26/0x60
   ip_vs_cleanup+0x11/0x38 [ip_vs]
   __x64_sys_delete_module+0x2d5/0x400
   do_syscall_64+0xa5/0x4e0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f8ea8bf0db7
  Code: 73 01 c3 48 8b 0d b9 80 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 80 2c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffcd38d2fe8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000000002436240 RCX: 00007f8ea8bf0db7
  RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00000000024362a8
  RBP: 0000000000000000 R08: 00007f8ea8eba060 R09: 00007f8ea8c658a0
  R10: 00007ffcd38d2a60 R11: 0000000000000206 R12: 0000000000000000
  R13: 0000000000000001 R14: 00000000024362a8 R15: 0000000000000000
  irq event stamp: 4538
  hardirqs last  enabled at (4537): [<ffffffffb6193dde>] quarantine_put+0x9e/0x170
  hardirqs last disabled at (4538): [<ffffffffb5a0556a>] trace_hardirqs_off_thunk+0x1a/0x20
  softirqs last  enabled at (4522): [<ffffffffb6f8ebe9>] sk_common_release+0x169/0x2d0
  softirqs last disabled at (4520): [<ffffffffb6f8eb3e>] sk_common_release+0xbe/0x2d0

Check the return value of ip_vs_use_count_inc() and let its caller return
proper error. Inside do_ip_vs_set_ctl() the module is already refcounted,
we don't need refcount/derefcount there. Finally, in register_ip_vs_app()
and start_sync_thread(), take the module refcount earlier and ensure it's
released in the error path.

Change since v1:
 - better return values in case of failure of ip_vs_use_count_inc(),
   thanks to Julian Anastasov
 - no need to increase/decrease the module refcount in ip_vs_set_ctl(),
   thanks to Julian Anastasov
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit daf61b02 ]

Other garbage collector might remove an entry not fully set up yet.

[570953.958293] RIP: 0010:memcmp+0x9/0x50
[...]
[570953.958567]  flow_offload_hash_cmp+0x1e/0x30 [nf_flow_table]
[570953.958585]  flow_offload_lookup+0x8c/0x110 [nf_flow_table]
[570953.958606]  nf_flow_offload_ip_hook+0x135/0xb30 [nf_flow_table]
[570953.958624]  nf_flow_offload_inet_hook+0x35/0x37 [nf_flow_table_inet]
[570953.958646]  nf_hook_slow+0x3c/0xb0
[570953.958664]  __netif_receive_skb_core+0x90f/0xb10
[570953.958678]  ? ip_rcv_finish+0x82/0xa0
[570953.958692]  __netif_receive_skb_one_core+0x3b/0x80
[570953.958711]  __netif_receive_skb+0x18/0x60
[570953.958727]  netif_receive_skb_internal+0x45/0xf0
[570953.958741]  napi_gro_receive+0xcd/0xf0
[570953.958764]  ixgbe_clean_rx_irq+0x432/0xe00 [ixgbe]
[570953.958782]  ixgbe_poll+0x27b/0x700 [ixgbe]
[570953.958796]  net_rx_action+0x284/0x3c0
[570953.958817]  __do_softirq+0xcc/0x27c
[570953.959464]  irq_exit+0xe8/0x100
[570953.960097]  do_IRQ+0x59/0xe0
[570953.960734]  common_interrupt+0xf/0xf

Fixes: 43c8f131 ("netfilter: nf_flow_table: fix missing error check for rhashtable_insert_fast")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c2ff2a36 ]

This patch fixes issue with Gen7 adapter in a blade environment where one
of the ports will not be detected by driver. Firmware expects mailbox 11 to
be set or cleared by driver for newer ISP.

Following message is seen in the log file:

[   18.810892] qla2xxx [0000:d8:00.0]-1820:1: **** Failed=102 mb[0]=4005 mb[1]=37 mb[2]=20 mb[3]=8
[   18.819596]  cmd=2 ****

[mkp: typos]

Link: https://lore.kernel.org/r/20191022193643.7076-2-hmadhani@marvell.comSigned-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0fd103cc ]

The initial lpfc_desc_set_adisc implementation in commit
dea3101e ("lpfc: add Emulex FC driver version 8.0.28") enabled ADISC if

	cfg_use_adisc && RSCN_MODE && FCP_2_DEVICE

In commit 92d7f7b0 ("[SCSI] lpfc: NPIV: add NPIV support on top of
SLI-3") this changed to

	(cfg_use_adisc && RSC_MODE) || FCP_2_DEVICE

and later in commit ffc95493 ("[SCSI] lpfc 8.3.13: FC Discovery Fixes
and enhancements.") to

	(cfg_use_adisc && RSC_MODE) || (FCP_2_DEVICE && FCP_TARGET)

A customer reports that after a devloss, an ADISC failure is logged. It
turns out the ADISC flag is set even the user explicitly set lpfc_use_adisc
= 0.

[Sat Dec 22 22:55:58 2018] lpfc 0000:82:00.0: 2:(0):0203 Devloss timeout on WWPN 50:01:43:80:12:8e:40:20 NPort x05df00 Data: x82000000 x8 xa
[Sat Dec 22 23:08:20 2018] lpfc 0000:82:00.0: 2:(0):2755 ADISC failure DID:05DF00 Status:x9/x70000

[mkp: fixed Hannes' email]

Fixes: 92d7f7b0 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3")
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: James Smart <james.smart@broadcom.com>
Link: https://lore.kernel.org/r/20191022072112.132268-1-dwagner@suse.deReviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9464cc37 ]

syzbot found the following crash on:

HEAD commit:    1e78030e Merge tag 'mmc-v5.3-rc1' of git://git.kernel.org/..
git tree:       upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=148d3d1a600000
kernel config:  https://syzkaller.appspot.com/x/.config?x=30cef20daf3e9977
dashboard link: https://syzkaller.appspot.com/bug?extid=13210896153522fe1ee5
compiler:       gcc (GCC) 9.0.0 20181231 (experimental)
syz repro:      https://syzkaller.appspot.com/x/repro.syz?x=136aa8c4600000
C reproducer:   https://syzkaller.appspot.com/x/repro.c?x=109ba792600000

=====================================================================
BUG: memory leak
unreferenced object 0xffff8881207e4100 (size 128):
   comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s)
   hex dump (first 32 bytes):
     00 70 16 18 81 88 ff ff 80 af 8c 22 81 88 ff ff  .p........."....
     00 b6 23 17 81 88 ff ff 00 00 00 00 00 00 00 00  ..#.............
   backtrace:
     [<000000000eb78212>] kmemleak_alloc_recursive  include/linux/kmemleak.h:43 [inline]
     [<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline]
     [<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline]
     [<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
     [<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline]
     [<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline]
     [<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0  net/openvswitch/vport.c:130
     [<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0  net/openvswitch/vport-internal_dev.c:164
     [<0000000056ee7c13>] ovs_vport_add+0x81/0x190  net/openvswitch/vport.c:199
     [<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
     [<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410  net/openvswitch/datapath.c:1614
     [<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0  net/netlink/genetlink.c:629
     [<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
     [<000000006694b647>] netlink_rcv_skb+0x61/0x170  net/netlink/af_netlink.c:2477
     [<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
     [<00000000dad42a47>] netlink_unicast_kernel  net/netlink/af_netlink.c:1302 [inline]
     [<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0  net/netlink/af_netlink.c:1328
     [<0000000067e6b079>] netlink_sendmsg+0x270/0x480  net/netlink/af_netlink.c:1917
     [<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
     [<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
     [<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
     [<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
     [<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline]
     [<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline]
     [<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363

BUG: memory leak
unreferenced object 0xffff88811723b600 (size 64):
   comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s)
   hex dump (first 32 bytes):
     01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
     00 00 00 00 00 00 00 00 02 00 00 00 05 35 82 c1  .............5..
   backtrace:
     [<00000000352f46d8>] kmemleak_alloc_recursive  include/linux/kmemleak.h:43 [inline]
     [<00000000352f46d8>] slab_post_alloc_hook mm/slab.h:522 [inline]
     [<00000000352f46d8>] slab_alloc mm/slab.c:3319 [inline]
     [<00000000352f46d8>] __do_kmalloc mm/slab.c:3653 [inline]
     [<00000000352f46d8>] __kmalloc+0x169/0x300 mm/slab.c:3664
     [<000000008e48f3d1>] kmalloc include/linux/slab.h:557 [inline]
     [<000000008e48f3d1>] ovs_vport_set_upcall_portids+0x54/0xd0  net/openvswitch/vport.c:343
     [<00000000541e4f4a>] ovs_vport_alloc+0x7f/0xf0  net/openvswitch/vport.c:139
     [<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0  net/openvswitch/vport-internal_dev.c:164
     [<0000000056ee7c13>] ovs_vport_add+0x81/0x190  net/openvswitch/vport.c:199
     [<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
     [<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410  net/openvswitch/datapath.c:1614
     [<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0  net/netlink/genetlink.c:629
     [<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
     [<000000006694b647>] netlink_rcv_skb+0x61/0x170  net/netlink/af_netlink.c:2477
     [<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
     [<00000000dad42a47>] netlink_unicast_kernel  net/netlink/af_netlink.c:1302 [inline]
     [<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0  net/netlink/af_netlink.c:1328
     [<0000000067e6b079>] netlink_sendmsg+0x270/0x480  net/netlink/af_netlink.c:1917
     [<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
     [<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
     [<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
     [<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356

BUG: memory leak
unreferenced object 0xffff8881228ca500 (size 128):
   comm "syz-executor032", pid 7015, jiffies 4294944622 (age 7.880s)
   hex dump (first 32 bytes):
     00 f0 27 18 81 88 ff ff 80 ac 8c 22 81 88 ff ff  ..'........"....
     40 b7 23 17 81 88 ff ff 00 00 00 00 00 00 00 00  @.#.............
   backtrace:
     [<000000000eb78212>] kmemleak_alloc_recursive  include/linux/kmemleak.h:43 [inline]
     [<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline]
     [<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline]
     [<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
     [<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline]
     [<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline]
     [<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0  net/openvswitch/vport.c:130
     [<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0  net/openvswitch/vport-internal_dev.c:164
     [<0000000056ee7c13>] ovs_vport_add+0x81/0x190  net/openvswitch/vport.c:199
     [<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
     [<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410  net/openvswitch/datapath.c:1614
     [<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0  net/netlink/genetlink.c:629
     [<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
     [<000000006694b647>] netlink_rcv_skb+0x61/0x170  net/netlink/af_netlink.c:2477
     [<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
     [<00000000dad42a47>] netlink_unicast_kernel  net/netlink/af_netlink.c:1302 [inline]
     [<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0  net/netlink/af_netlink.c:1328
     [<0000000067e6b079>] netlink_sendmsg+0x270/0x480  net/netlink/af_netlink.c:1917
     [<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
     [<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
     [<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
     [<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
     [<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline]
     [<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline]
     [<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363
=====================================================================

The function in net core, register_netdevice(), may fail with vport's
destruction callback either invoked or not. After commit 309b6697
("net: openvswitch: do not free vport if register_netdevice() is failed."),
the duty to destroy vport is offloaded from the driver OTOH, which ends
up in the memory leak reported.

It is fixed by releasing vport unless device is registered successfully.
To do that, the callback assignment is defered until device is registered.

Reported-by: syzbot+13210896153522fe1ee5@syzkaller.appspotmail.com
Fixes: 309b6697 ("net: openvswitch: do not free vport if register_netdevice() is failed.")
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Greg Rose <gvrose8192@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
[sbrivio: this was sent to dev@openvswitch.org and never made its way
 to netdev -- resending original patch]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a9018adf ]

The issue is in drivers/infiniband/core/uverbs_std_types_cq.c in the
UVERBS_HANDLER(UVERBS_METHOD_CQ_CREATE) function.  We check that:

        if (attr.comp_vector >= attrs->ufile->device->num_comp_vectors) {

But we don't check if "attr.comp_vector" is negative.  It could
potentially lead to an array underflow.  My concern would be where
cq->vector is used in the create_cq() function from the cxgb4 driver.

And really "attr.comp_vector" is appears as a u32 to user space so that's
the right type to use.

Fixes: 9ee79fce ("IB/core: Add completion queue (cq) object actions")
Link: https://lore.kernel.org/r/20191011133419.GA22905@mwandaSigned-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 66cf50e6 ]

DRIVER_ERROR is a a driver byte setting, not a host byte.  The qla2xxx
driver should rather return DID_ERROR here to be in line with the other
drivers.

Link: https://lore.kernel.org/r/20191018140458.108278-1-hare@suse.deSigned-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c8c2a057 ]

In mlx5_fpga_conn_create_cq if mlx5_vector2eqn fails the allocated
memory should be released.

Fixes: 537a5057 ("net/mlx5: FPGA, Add high-speed connection routines")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 61ea02d2 ]

The completion queue consumer index increments upon a call to
mlx5_cqwq_pop().
When dumping an error CQE, the index is already incremented.
Decrease one for the print command.

Fixes: 16cc14d8 ("net/mlx5e: Dump xmit error completions")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b806c94e ]

Remove spaces from the reported firmware version string.
Actual value:
$ cat /sys/class/infiniband/qedr0/fw_ver
8. 37. 7. 0

Expected value:
$ cat /sys/class/infiniband/qedr0/fw_ver
8.37.7.0

Fixes: ec72fce4 ("qedr: Add support for RoCE HW init")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Link: https://lore.kernel.org/r/20191007210730.7173-1-kamalheib1@gmail.comSigned-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 612e0486 ]

pass_accept_req() is using the same skb for handling accept request and
sending accept reply to HW. Here req and rpl structures are pointing to
same skb->data which is over written by INIT_TP_WR() and leads to
accessing corrupt req fields in accept_cr() while checking for ECN flags.
Reordered code in accept_cr() to fetch correct req fields.

Fixes: 92e7ae71 ("iw_cxgb4: Choose appropriate hw mtu index and ISS for iWARP connections")
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20191003104353.11590-1-bharat@chelsio.comSigned-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c8973df2 ]

Before QP is closed it changes to ERROR state, when this happens
the QP was left with old rate limit that was already removed from
the table.

Fixes: 7d29f349 ("IB/mlx5: Properly adjust rate limit on QP state transitions")
Signed-off-by: Rafi Wiener <rafiw@mellanox.com>
Signed-off-by: Oleg Kuporosov <olegk@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191002120243.16971-1-leon@kernel.orgSigned-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 16ff7bf6 ]

When allocating tx ring buffers failed, should free tx buffers, not rx buffers.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ec1ac309 ]

If we terminate the channel to free all descriptors associated with this
channel, we will leak the memory of current descriptor if the current
descriptor is not completed, since it had been deteled from the desc_issued
list and have not been added into the desc_completed list.

Thus we should check if current descriptor is completed or not, when freeing
the descriptors associated with one channel, if not, we should free it to
avoid this issue.

Fixes: 9b3b8171 ("dmaengine: sprd: Add Spreadtrum DMA driver")
Reported-by: Zhenfang Wang <zhenfang.wang@unisoc.com>
Tested-by: Zhenfang Wang <zhenfang.wang@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/170dbbc6d5366b6fa974ce2d366652e23a334251.1570609788.git.baolin.wang@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6c6de1dd ]

In vdma_channel_set_config clear the delay, frame count and master mask
before updating their new values. It avoids programming incorrect state
when input parameters are different from default.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Acked-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1569495060-18117-3-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9e4dbc46 ]

Add 2 additional hammer-like devices.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 7be142ca upstream.

The PCI Tegra controller conversion to a device tree configurable
driver in commit d1523b52 ("PCI: tegra: Move PCIe driver
to drivers/pci/host") implied that code for the driver can be
compiled in for a kernel supporting multiple platforms.

Unfortunately, a blind move of the code did not check that some of the
quirks that were applied in arch/arm (eg enabling Relaxed Ordering on
all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID
for both Vendor-ID and Device-ID) are now applied in all kernels that
compile the PCI Tegra controlled driver, DT and ACPI alike.

This is completely wrong, in that enablement of Relaxed Ordering is only
required by default in Tegra20 platforms as described in the Tegra20
Technical Reference Manual (available at
https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in
Section 34.1, where it is mentioned that Relaxed Ordering bit needs to
be enabled in its root ports to avoid deadlock in hardware) and in the
Tegra30 platforms for the same reasons (unfortunately not documented
in the TRM).

There is no other strict requirement on PCI devices Relaxed Ordering
enablement on any other Tegra platforms or PCI host bridge driver.

Fix this quite upsetting situation by limiting the vendor and device IDs
to which the Relaxed Ordering quirk applies to the root ports in
question, reported above.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[lorenzo.pieralisi@arm.com: completely rewrote the commit log/fixes tag]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ea44d190 upstream.

There are bugs on vhci with usb 3.0 storage device. In USB, each SG
list entry buffer should be divisible by the bulk max packet size.
But with native SG support, this problem doesn't matter because the
SG buffer is treated as contiguous buffer. But without native SG
support, USB storage driver breaks SG list into several URBs and the
error occurs because of a buffer size of URB that cannot be divided
by the bulk max packet size. The error situation is as follows.

When USB Storage driver requests 31.5 KB data and has SG list which
has 3584 bytes buffer followed by 7 4096 bytes buffer for some
reason. USB Storage driver splits this SG list into several URBs
because VHCI doesn't support SG and sends them separately. So the
first URB buffer size is 3584 bytes. When receiving data from device,
USB 3.0 device sends data packet of 1024 bytes size because the max
packet size of BULK pipe is 1024 bytes. So device sends 4096 bytes.
But the first URB buffer has only 3584 bytes buffer size. So host
controller terminates the transfer even though there is more data to
receive. So, vhci needs to support SG transfer to prevent this error.

In this patch, vhci supports SG regardless of whether the server's
host controller supports SG or not, because stub driver splits SG
list into several URBs if the server's host controller doesn't
support SG.

To support SG, vhci sets URB_DMA_MAP_SG flag in urb->transfer_flags
if URB has SG list and this flag will tell stub driver to use SG
list. After receiving urb from stub driver, vhci clear URB_DMA_MAP_SG
flag to avoid unnecessary DMA unmapping in HCD.

vhci sends each SG list entry to stub driver. Then, stub driver sees
the total length of the buffer and allocates SG table and pages
according to the total buffer length calling sgl_alloc(). After stub
driver receives completed URB, it again sends each SG list entry to
vhci.

If the server's host controller doesn't support SG, stub driver
breaks a single SG request into several URBs and submits them to
the server's host controller. When all the split URBs are completed,
stub driver reassembles the URBs into a single return command and
sends it to vhci.

Moreover, in the situation where vhci supports SG, but stub driver
does not, or vice versa, usbip works normally. Because there is no
protocol modification, there is no problem in communication between
server and client even if the one has a kernel without SG support.

In the case of vhci supports SG and stub driver doesn't, because
vhci sends only the total length of the buffer to stub driver as
it did before the patch applied, stub driver only needs to allocate
the required length of buffers using only kmalloc() regardless of
whether vhci supports SG or not. But stub driver has to allocate
buffer with kmalloc() as much as the total length of SG buffer which
is quite huge when vhci sends SG request, so it has overhead in
buffer allocation in this situation.

If stub driver needs to send data buffer to vhci because of IN pipe,
stub driver also sends only total length of buffer as metadata and
then sends real data as vhci does. Then vhci receive data from stub
driver and store it to the corresponding buffer of SG list entry.

And for the case of stub driver supports SG and vhci doesn't, since
the USB storage driver checks that vhci doesn't support SG and sends
the request to stub driver by splitting the SG list into multiple
URBs, stub driver allocates a buffer for each URB with kmalloc() as
it did before this patch.

* Test environment

Test uses two difference machines and two different kernel version
to make mismatch situation between the client and the server where
vhci supports SG, but stub driver does not, or vice versa. All tests
are conducted in both full SG support that both vhci and stub support
SG and half SG support that is the mismatch situation. Test kernel
version is 5.3-rc6 with commit "usb: add a HCD_DMA flag instead of
guestimating DMA capabilities" to avoid unnecessary DMA mapping and
unmapping.

 - Test kernel version
    - 5.3-rc6 with SG support
    - 5.1.20-200.fc29.x86_64 without SG support

* SG support test

 - Test devices
    - Super-speed storage device - SanDisk Ultra USB 3.0
    - High-speed storage device - SMI corporation USB 2.0 flash drive

 - Test description

Test read and write operation of mass storage device that uses the
BULK transfer. In test, the client reads and writes files whose size
is over 1G and it works normally.

* Regression test

 - Test devices
    - Super-speed device - Logitech Brio webcam
    - High-speed device  - Logitech C920 HD Pro webcam
    - Full-speed device  - Logitech bluetooth mouse
                         - Britz BR-Orion speaker
    - Low-speed device   - Logitech wired mouse

 - Test description

Moving and click test for mouse. To test the webcam, use gnome-cheese.
To test the speaker, play music and video on the client. All works
normally.

* VUDC compatibility test

VUDC also works well with this patch. Tests are done with two USB
gadget created by CONFIGFS USB gadget. Both use the BULK pipe.

        1. Serial gadget
        2. Mass storage gadget

 - Serial gadget test

Serial gadget on the host sends and receives data using cat command
on the /dev/ttyGS<N>. The client uses minicom to communicate with
the serial gadget.

 - Mass storage gadget test

After connecting the gadget with vhci, use "dd" to test read and
write operation on the client side.

Read  - dd if=/dev/sd<N> iflag=direct of=/dev/null bs=1G count=1
Write - dd if=<my file path> iflag=direct of=/dev/sd<N> bs=1G count=1
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Acked-by: Shuah khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190828032741.12234-1-suwan.kim027@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2c904963 upstream.

Fix vhci_urb_enqueue() to print debug msg and return error instead of
failing with BUG_ON.
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>