- 10 Dec, 2016 27 commits
-
-
Tobias Brunner authored
commit 7c7fedd5 upstream. When handling inbound packets, the two halves of the sequence number stored on the skb are already in network order. Fixes: 7021b2e1 ("esp4: Switch to new AEAD interface") Signed-off-by:
Tobias Brunner <tobias@strongswan.org> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eli Cooper authored
commit f4180439 upstream. When xfrm is applied to TSO/GSO packets, it follows this path: xfrm_output() -> xfrm_output_gso() -> skb_gso_segment() where skb_gso_segment() relies on skb->protocol to function properly. This patch sets skb->protocol to ETH_P_IP before dst_output() is called, fixing a bug where GSO packets sent through a sit tunnel are dropped when xfrm is involved. Signed-off-by:
Eli Cooper <elicooper@gmx.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eli Cooper authored
commit b4e479a9 upstream. When xfrm is applied to TSO/GSO packets, it follows this path: xfrm_output() -> xfrm_output_gso() -> skb_gso_segment() where skb_gso_segment() relies on skb->protocol to function properly. This patch sets skb->protocol to ETH_P_IPV6 before dst_output() is called, fixing a bug where GSO packets sent through an ipip6 tunnel are dropped when xfrm is involved. Signed-off-by:
-
Linus Torvalds authored
commit a0ac402c upstream. In theory we could map other things, but there's a reason that function is called "user_iov". Using anything else (like splice can do) just confuses it. Reported-and-tested-by:
Johannes Thumshirn <jthumshirn@suse.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Al Viro authored
commit b57332b4 upstream. [stable note, need this to prevent build warning in commit a0ac402c] Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Thomas Tai authored
[ Upstream commit 87a349f9 ] A compile warning is introduced by a commit to fix the find_node(). This patch fix the compile warning by moving find_node() into __init section. Because find_node() is only used by memblock_nid_range() which is only used by a __init add_node_ranges(). find_node() and memblock_nid_range() should also be inside __init section. Signed-off-by:
Thomas Tai <thomas.tai@oracle.com> Signed-off-by:
-
Thomas Tai authored
[ Upstream commit 74a5ed5c ] When booting up LDOM, find_node() warns that a physical address doesn't match a NUMA node. WARNING: CPU: 0 PID: 0 at arch/sparc/mm/init_64.c:835 find_node+0xf4/0x120 find_node: A physical address doesn't match a NUMA node rule. Some physical memory will be owned by node 0.Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-rc3 #4 Call Trace: [0000000000468ba0] __warn+0xc0/0xe0 [0000000000468c74] warn_slowpath_fmt+0x34/0x60 [00000000004592f4] find_node+0xf4/0x120 [0000000000dd0774] add_node_ranges+0x38/0xe4 [0000000000dd0b1c] numa_parse_mdesc+0x268/0x2e4 [0000000000dd0e9c] bootmem_init+0xb8/0x160 [0000000000dd174c] paging_init+0x808/0x8fc [0000000000dcb0d0] setup_arch+0x2c8/0x2f0 [0000000000dc68a0] start_kernel+0x48/0x424 [0000000000dcb374] start_early_boot+0x27c/0x28c [0000000000a32c08] tlb_fixup_done+0x4c/0x64 [0000000000027f08] 0x27f08 It is because linux use an internal structure node_masks[] to keep the best memory latency node only. However, LDOM mdesc can contain single latency-group with multiple memory latency nodes. If the address doesn't match the best latency node within node_masks[], it should check for an alternative via mdesc. The warning message should only be printed if the address doesn't match any node_masks[] nor within mdesc. To minimize the impact of searching mdesc every time, the last matched mask and index is stored in a variable. Signed-off-by:
Chris Hyser <chris.hyser@oracle.com> Reviewed-by:
Liam Merwick <liam.merwick@oracle.com> Signed-off-by:
-
Andreas Larsson authored
[ Upstream commit 07b5ab3f ] Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
-
Kees Cook authored
[ Upstream commit 0eab121e ] Prior to commit c0371da6 ("put iov_iter into msghdr") in v3.19, there was no check that the iovec contained enough bytes for an ICMP header, and the read loop would walk across neighboring stack contents. Since the iov_iter conversion, bad arguments are noticed, but the returned error is EFAULT. Returning EINVAL is a clearer error and also solves the problem prior to v3.19. This was found using trinity with KASAN on v3.18: BUG: KASAN: stack-out-of-bounds in memcpy_fromiovec+0x60/0x114 at addr ffffffc071077da0 Read of size 8 by task trinity-c2/9623 page:ffffffbe034b9a08 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() page dumped because: kasan: bad access detected CPU: 0 PID: 9623 Comm: trinity-c2 Tainted: G BU 3.18.0-dirty #15 Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT) Call trace: [<ffffffc000209c98>] dump_backtrace+0x0/0x1ac arch/arm64/kernel/traps.c:90 [<ffffffc000209e54>] show_stack+0x10/0x1c arch/arm64/kernel/traps.c:171 [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffc000f18dc4>] dump_stack+0x7c/0xd0 lib/dump_stack.c:50 [< inline >] print_address_description mm/kasan/report.c:147 [< inline >] kasan_report_error mm/kasan/report.c:236 [<ffffffc000373dcc>] kasan_report+0x380/0x4b8 mm/kasan/report.c:259 [< inline >] check_memory_region mm/kasan/kasan.c:264 [<ffffffc00037352c>] __asan_load8+0x20/0x70 mm/kasan/kasan.c:507 [<ffffffc0005b9624>] memcpy_fromiovec+0x5c/0x114 lib/iovec.c:15 [< inline >] memcpy_from_msg include/linux/skbuff.h:2667 [<ffffffc000ddeba0>] ping_common_sendmsg+0x50/0x108 net/ipv4/ping.c:674 [<ffffffc000dded30>] ping_v4_sendmsg+0xd8/0x698 net/ipv4/ping.c:714 [<ffffffc000dc91dc>] inet_sendmsg+0xe0/0x12c net/ipv4/af_inet.c:749 [< inline >] __sock_sendmsg_nosec net/socket.c:624 [< inline >] __sock_sendmsg net/socket.c:632 [<ffffffc000cab61c>] sock_sendmsg+0x124/0x164 net/socket.c:643 [< inline >] SYSC_sendto net/socket.c:1797 [<ffffffc000cad270>] SyS_sendto+0x178/0x1d8 net/socket.c:1761 CVE-2016-8399 Reported-by:
Qidan He <i@flanker017.me> Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b98b0bc8 ] CAP_NET_ADMIN users should not be allowed to set negative sk_sndbuf or sk_rcvbuf values, as it can lead to various memory corruptions, crashes, OOM... Note that before commit 82981930 ("net: cleanups in sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF and SO_RCVBUF were vulnerable. This needs to be backported to all known linux kernels. Again, many thanks to syzkaller team for discovering this gem. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 5b010147 ] geneve{,6}_build_skb can end up doing a pskb_expand_head(), which makes the ip_hdr(skb) reference we stashed earlier stale. Since it's only needed as an argument to ip_tunnel_ecn_encap(), move this directly in the function call. Fixes: 08399efc ("geneve: ensure ECN info is handled properly in all tx/rx paths") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Chris Brandt authored
[ Upstream commit 33d446db ] When streaming a lot of data and the RZ/A1 can't keep up, some status bits will get set that are not being checked or cleared which cause the following messages and the Ethernet driver to stop working. This patch fixes that issue. irq 21: nobody cared (try booting with the "irqpoll" option) handlers: [<c036b71c>] sh_eth_interrupt Disabling IRQ #21 Fixes: db893473 ("sh_eth: Add support for r7s72100") Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 8c4799ac ] __bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the same struct device during unmap that was used for the map operation, which makes DMA-API debugging warn about it. Fix this by always using &priv->pdev->dev throughout the driver, using an identical device reference for all map/unmap calls. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Philip Pettersson authored
[ Upstream commit 84ac7260 ] When packet_set_ring creates a ring buffer it will initialize a struct timer_list if the packet version is TPACKET_V3. This value can then be raced by a different thread calling setsockopt to set the version to TPACKET_V1 before packet_set_ring has finished. This leads to a use-after-free on a function pointer in the struct timer_list when the socket is closed as the previously initialized timer will not be deleted. The bug is fixed by taking lock_sock(sk) in packet_setsockopt when changing the packet version while also taking the lock at the start of packet_set_ring. Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by:
Philip Pettersson <philip.pettersson@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 648f0c28 ] pskb_may_pull() can reallocate skb->head, we need to reload dh pointer in dccp_invalid_packet() or risk use after free. Bug found by Andrey Konovalov using syzkaller. Signed-off-by:
-
Herbert Xu authored
[ Upstream commit ed5d7788 ] It is wrong to schedule a work from sk_destruct using the socket as the memory reserve because the socket will be freed immediately after the return from sk_destruct. Instead we should do the deferral prior to sk_free. This patch does just that. Fixes: 707693c8 ("netlink: Call cb->done from a worker thread") Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 707693c8 ] The cb->done interface expects to be called in process context. This was broken by the netlink RCU conversion. This patch fixes it by adding a worker struct to make the cb->done call where necessary. Fixes: 21e4902a ("netlink: Lockless lookup with RCU grace...") Reported-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Amir Vadai authored
[ Upstream commit 95c2027b ] Add a validation function to make sure offset is valid: 1. Not below skb head (could happen when offset is negative). 2. Validate both 'offset' and 'at'. Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit d9363774 ] Roi reported a crash in flower where tp->root was NULL in ->classify() callbacks. Reason is that in ->destroy() tp->root is set to NULL via RCU_INIT_POINTER(). It's problematic for some of the classifiers, because this doesn't respect RCU grace period for them, and as a result, still outstanding readers from tc_classify() will try to blindly dereference a NULL tp->root. The tp->root object is strictly private to the classifier implementation and holds internal data the core such as tc_ctl_tfilter() doesn't know about. Within some classifiers, such as cls_bpf, cls_basic, etc, tp->root is only checked for NULL in ->get() callback, but nowhere else. This is misleading and seemed to be copied from old classifier code that was not cleaned up properly. For example, d3fa76ee ("[NET_SCHED]: cls_basic: fix NULL pointer dereference") moved tp->root initialization into ->init() routine, where before it was part of ->change(), so ->get() had to deal with tp->root being NULL back then, so that was indeed a valid case, after d3fa76ee, not really anymore. We used to set tp->root to NULL long ago in ->destroy(), see 47a1a1d4 ("pkt_sched: remove unnecessary xchg() in packet classifiers"); but the NULLifying was reintroduced with the RCUification, but it's not correct for every classifier implementation. In the cases that are fixed here with one exception of cls_cgroup, tp->root object is allocated and initialized inside ->init() callback, which is always performed at a point in time after we allocate a new tp, which means tp and thus tp->root was not globally visible in the tp chain yet (see tc_ctl_tfilter()). Also, on destruction tp->root is strictly kfree_rcu()'ed in ->destroy() handler, same for the tp which is kfree_rcu()'ed right when we return from ->destroy() in tcf_destroy(). This means, the head object's lifetime for such classifiers is always tied to the tp lifetime. The RCU callback invocation for the two kfree_rcu() could be out of order, but that's fine since both are independent. Dropping the RCU_INIT_POINTER(tp->root, NULL) for these classifiers here means that 1) we don't need a useless NULL check in fast-path and, 2) that outstanding readers of that tp in tc_classify() can still execute under respect with RCU grace period as it is actually expected. Things that haven't been touched here: cls_fw and cls_route. They each handle tp->root being NULL in ->classify() path for historic reasons, so their ->destroy() implementation can stay as is. If someone actually cares, they could get cleaned up at some point to avoid the test in fast path. cls_u32 doesn't set tp->root to NULL. For cls_rsvp, I just added a !head should anyone actually be using/testing it, so it at least aligns with cls_fw and cls_route. For cls_flower we additionally need to defer rhashtable destruction (to a sleepable context) after RCU grace period as concurrent readers might still access it. (Note that in this case we need to hold module reference to keep work callback address intact, since we only wait on module unload for all call_rcu()s to finish.) This fixes one race to bring RCU grace period guarantees back. Next step as worked on by Cong however is to fix 1e052be6 ("net_sched: destroy proto tp when all filters are gone") to get the order of unlinking the tp in tc_ctl_tfilter() for the RTM_DELTFILTER case right by moving RCU_INIT_POINTER() before tcf_destroy() and let the notification for removal be done through the prior ->delete() callback. Both are independant issues. Once we have that right, we can then clean tp->root up for a number of classifiers by not making them RCU pointers, which requires a new callback (->uninit) that is triggered from tp's RCU callback, where we just kfree() tp->root from there. Fixes: 1f947bf1 ("net: sched: rcu'ify cls_bpf") Fixes: 9888faef ("net: sched: cls_basic use RCU") Fixes: 70da9f0b ("net: sched: cls_flow use RCU") Fixes: 77b9900e ("tc: introduce Flower classifier") Fixes: bf3994d2 ("net/sched: introduce Match-all classifier") Fixes: 952313bd ("net: sched: cls_cgroup use RCU") Reported-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Roi Dayan <roid@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Acked-by:
John Fastabend <john.r.fastabend@intel.com> Acked-by:
-
Florian Fainelli authored
[ Upstream commit 76da8706 ] In case the link change and EEE is enabled or disabled, always try to re-negotiate this with the link partner. Fixes: 450b05c1 ("net: dsa: bcm_sf2: add support for controlling EEE") Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 32c23116 ] Lock socket before checking the SOCK_ZAPPED flag in l2tp_ip6_bind(). Without lock, a concurrent call could modify the socket flags between the sock_flag(sk, SOCK_ZAPPED) test and the lock_sock() call. This way, a socket could be inserted twice in l2tp_ip6_bind_table. Releasing it would then leave a stale pointer there, generating use-after-free errors when walking through the list or modifying adjacent entries. BUG: KASAN: use-after-free in l2tp_ip6_close+0x22e/0x290 at addr ffff8800081b0ed8 Write of size 8 by task syz-executor/10987 CPU: 0 PID: 10987 Comm: syz-executor Not tainted 4.8.0+ #39 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 ffff880031d97838 ffffffff829f835b ffff88001b5a1640 ffff8800081b0ec0 ffff8800081b15a0 ffff8800081b6d20 ffff880031d97860 ffffffff8174d3cc ffff880031d978f0 ffff8800081b0e80 ffff88001b5a1640 ffff880031d978e0 Call Trace: [<ffffffff829f835b>] dump_stack+0xb3/0x118 lib/dump_stack.c:15 [<ffffffff8174d3cc>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 [< inline >] print_address_description mm/kasan/report.c:194 [<ffffffff8174d666>] kasan_report_error+0x1f6/0x4d0 mm/kasan/report.c:283 [< inline >] kasan_report mm/kasan/report.c:303 [<ffffffff8174db7e>] __asan_report_store8_noabort+0x3e/0x40 mm/kasan/report.c:329 [< inline >] __write_once_size ./include/linux/compiler.h:249 [< inline >] __hlist_del ./include/linux/list.h:622 [< inline >] hlist_del_init ./include/linux/list.h:637 [<ffffffff8579047e>] l2tp_ip6_close+0x22e/0x290 net/l2tp/l2tp_ip6.c:239 [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [<ffffffff813774f9>] task_work_run+0xf9/0x170 [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Object at ffff8800081b0ec0, in cache L2TP/IPv6 size: 1448 Allocated: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174c9ad>] kasan_kmalloc+0xad/0xe0 [ 1116.897025] [<ffffffff8174cee2>] kasan_slab_alloc+0x12/0x20 [ 1116.897025] [< inline >] slab_post_alloc_hook mm/slab.h:417 [ 1116.897025] [< inline >] slab_alloc_node mm/slub.c:2708 [ 1116.897025] [< inline >] slab_alloc mm/slub.c:2716 [ 1116.897025] [<ffffffff817476a8>] kmem_cache_alloc+0xc8/0x2b0 mm/slub.c:2721 [ 1116.897025] [<ffffffff84c4f6a9>] sk_prot_alloc+0x69/0x2b0 net/core/sock.c:1326 [ 1116.897025] [<ffffffff84c58ac8>] sk_alloc+0x38/0xae0 net/core/sock.c:1388 [ 1116.897025] [<ffffffff851ddf67>] inet6_create+0x2d7/0x1000 net/ipv6/af_inet6.c:182 [ 1116.897025] [<ffffffff84c4af7b>] __sock_create+0x37b/0x640 net/socket.c:1153 [ 1116.897025] [< inline >] sock_create net/socket.c:1193 [ 1116.897025] [< inline >] SYSC_socket net/socket.c:1223 [ 1116.897025] [<ffffffff84c4b46f>] SyS_socket+0xef/0x1b0 net/socket.c:1203 [ 1116.897025] [<ffffffff85e4d685>] entry_SYSCALL_64_fastpath+0x23/0xc6 Freed: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174cf61>] kasan_slab_free+0x71/0xb0 [ 1116.897025] [< inline >] slab_free_hook mm/slub.c:1352 [ 1116.897025] [< inline >] slab_free_freelist_hook mm/slub.c:1374 [ 1116.897025] [< inline >] slab_free mm/slub.c:2951 [ 1116.897025] [<ffffffff81748b28>] kmem_cache_free+0xc8/0x330 mm/slub.c:2973 [ 1116.897025] [< inline >] sk_prot_free net/core/sock.c:1369 [ 1116.897025] [<ffffffff84c541eb>] __sk_destruct+0x32b/0x4f0 net/core/sock.c:1444 [ 1116.897025] [<ffffffff84c5aca4>] sk_destruct+0x44/0x80 net/core/sock.c:1452 [ 1116.897025] [<ffffffff84c5ad33>] __sk_free+0x53/0x220 net/core/sock.c:1460 [ 1116.897025] [<ffffffff84c5af23>] sk_free+0x23/0x30 net/core/sock.c:1471 [ 1116.897025] [<ffffffff84c5cb6c>] sk_common_release+0x28c/0x3e0 ./include/net/sock.h:1589 [ 1116.897025] [<ffffffff8579044e>] l2tp_ip6_close+0x1fe/0x290 net/l2tp/l2tp_ip6.c:243 [ 1116.897025] [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [ 1116.897025] [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [ 1116.897025] [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [ 1116.897025] [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [ 1116.897025] [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [ 1116.897025] [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [ 1116.897025] [<ffffffff813774f9>] task_work_run+0xf9/0x170 [ 1116.897025] [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [ 1116.897025] [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [ 1116.897025] [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [ 1116.897025] [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [ 1116.897025] [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [ 1116.897025] [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [ 1116.897025] [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [ 1116.897025] [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Memory state around the buggy address: ffff8800081b0d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800081b0e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8800081b0e80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8800081b0f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8800081b0f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The same issue exists with l2tp_ip_bind() and l2tp_ip_bind_table. Fixes: c51ce497 ("l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case") Reported-by:
Baozeng Ding <sploving1@gmail.com> Reported-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit f82ef3e1 ] Add missing NDA_VLAN attribute's size. Fixes: 1e53d5bb ("net: Pass VLAN ID to rtnl_fdb_notify.") Signed-off-by:
-
WANG Cong authored
[ Upstream commit 06a77b07 ] Commit 2b15af6f ("af_unix: use freezable blocking calls in read") converts schedule_timeout() to its freezable version, it was probably correct at that time, but later, commit 2b514574 ("net: af_unix: implement splice for stream af_unix sockets") breaks the strong requirement for a freezable sleep, according to commit 0f9548ca: We shouldn't try_to_freeze if locks are held. Holding a lock can cause a deadlock if the lock is later acquired in the suspend or hibernate path (e.g. by dpm). Holding a lock can also cause a deadlock in the case of cgroup_freezer if a lock is held inside a frozen cgroup that is later acquired by a process outside that group. The pipe_lock is still held at that point. So use freezable version only for the recvmsg call path, avoid impact for Android. Fixes: 2b514574 ("net: af_unix: implement splice for stream af_unix sockets") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Colin Cross <ccross@android.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Jeremy Linton authored
[ Upstream commit 06ba3b21 ] The sky2 frequently crashes during machine shutdown with: sky2_get_stats+0x60/0x3d8 [sky2] dev_get_stats+0x68/0xd8 rtnl_fill_stats+0x54/0x140 rtnl_fill_ifinfo+0x46c/0xc68 rtmsg_ifinfo_build_skb+0x7c/0xf0 rtmsg_ifinfo.part.22+0x3c/0x70 rtmsg_ifinfo+0x50/0x5c netdev_state_change+0x4c/0x58 linkwatch_do_dev+0x50/0x88 __linkwatch_run_queue+0x104/0x1a4 linkwatch_event+0x30/0x3c process_one_work+0x140/0x3e0 worker_thread+0x60/0x44c kthread+0xdc/0xf0 ret_from_fork+0x10/0x50 This is caused by the sky2 being called after it has been shutdown. A previous thread about this can be found here: https://lkml.org/lkml/2016/4/12/410 An alternative fix is to assure that IFF_UP gets cleared by calling dev_close() during shutdown. This is similar to what the bnx2/tg3/xgene and maybe others are doing to assure that the driver isn't being called following _shutdown(). Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit b5c2d495 ] If an ip6 tunnel is configured to inherit the traffic class from the inner header, the dst_cache must be disabled or it will foul the policy routing. The issue is apprently there since at leat Linux-2.6.12-rc2. Reported-by:
Liam McBirnie <liam.mcbirnie@boeing.com> Cc: Liam McBirnie <liam.mcbirnie@boeing.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit cfc44a4d ] Andrei reports we still allocate netns ID from idr after we destroy it in cleanup_net(). cleanup_net(): ... idr_destroy(&net->netns_ids); ... list_for_each_entry_reverse(ops, &pernet_list, list) ops_exit_list(ops, &net_exit_list); -> rollback_registered_many() -> rtmsg_ifinfo_build_skb() -> rtnl_fill_ifinfo() -> peernet2id_alloc() After that point we should not even access net->netns_ids, we should check the death of the current netns as early as we can in peernet2id_alloc(). For net-next we can consider to avoid sending rtmsg totally, it is a good optimization for netns teardown path. Fixes: 0c7aecd4 ("netns: add rtnl cmd to add and get peer netns ids") Reported-by:
Andrei Vagin <avagin@gmail.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Andrei Vagin <avagin@openvz.org> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 963abe5c ] It seems many drivers do not respect napi_hash_del() contract. When napi_hash_del() is used before netif_napi_del(), an RCU grace period is needed before freeing NAPI object. Fixes: 91815639 ("virtio-net: rx busy polling support") Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
- 08 Dec, 2016 13 commits
-
-
Greg Kroah-Hartman authored
-
James Morse authored
commit d0854412 upstream. The suspend/resume path in kernel/sleep.S, as used by cpu-idle, does not save/restore PSTATE. As a result of this cpufeatures that were detected and have bits in PSTATE get lost when we resume from idle. UAO gets set appropriately on the next context switch. PAN will be re-enabled next time we return from user-space, but on a preemptible kernel we may run work accessing user space before this point. Add code to re-enable theses two features in __cpu_suspend_exit(). We re-use uao_thread_switch() passing current. Signed-off-by:
James Morse <james.morse@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> [Removed UAO hooks and commit-message references: this feature is not present in v4.4] Signed-off-by:
-
James Morse authored
commit 7209c868 upstream. Commit 338d4f49 ("arm64: kernel: Add support for Privileged Access Never") enabled PAN by enabling the 'SPAN' feature-bit in SCTLR_EL1. This means the PSTATE.PAN bit won't be set until the next return to the kernel from userspace. On a preemptible kernel we may schedule work that accesses userspace on a CPU before it has done this. Now that cpufeature enable() calls are scheduled via stop_machine(), we can set PSTATE.PAN from the cpu_enable_pan() call. Add WARN_ON_ONCE(in_interrupt()) to check the PSTATE value we updated is not immediately discarded. Reported-by:
Tony Thompson <anthony.thompson@arm.com> Reported-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
-
James Morse authored
commit 2a6dcb2b upstream. The enable() call for a cpufeature/errata is called using on_each_cpu(). This issues a cross-call IPI to get the work done. Implicitly, this stashes the running PSTATE in SPSR when the CPU receives the IPI, and restores it when we return. This means an enable() call can never modify PSTATE. To allow PAN to do this, change the on_each_cpu() call to use stop_machine(). This schedules the work on each CPU which allows us to modify PSTATE. This involves changing the protype of all the enable() functions. enable_cpu_capabilities() is called during boot and enables the feature on all online CPUs. This path now uses stop_machine(). CPU features for hotplug'd CPUs are enabled by verify_local_cpu_features() which only acts on the local CPU, and can already modify the running PSTATE as it is called from secondary_start_kernel(). Reported-by:
-
Johan Hovold authored
commit 0e1614ac upstream. Make sure to drop the reference to the parent device taken by class_find_device() after "unexporting" any children when deregistering a PWM chip. Fixes: 0733424c ("pwm: Unexport children before chip removal") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Brian Norris authored
commit fcd2042e upstream. SSIDs aren't guaranteed to be 0-terminated. Let's cap the max length when we print them out. This can be easily noticed by connecting to a network with a 32-octet SSID: [ 3903.502925] mwifiex_pcie 0000:01:00.0: info: trying to associate to '0123456789abcdef0123456789abcdef <uninitialized mem>' bssid xx:xx:xx:xx:xx:xx Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by:
Brian Norris <briannorris@chromium.org> Acked-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Johannes Thumshirn authored
commit e42010d8 upstream. Per PCIe spec r3.0, sec 2.3.1.1, the Read Completion Boundary (RCB) determines the naturally aligned address boundaries on which a Read Request may be serviced with multiple Completions: - For a Root Complex, RCB is 64 bytes or 128 bytes This value is reported in the Link Control Register Note: Bridges and Endpoints may implement a corresponding command bit which may be set by system software to indicate the RCB value for the Root Complex, allowing the Bridge/Endpoint to optimize its behavior when the Root Complex’s RCB is 128 bytes. - For all other system elements, RCB is 128 bytes Per sec 7.8.7, if a Root Port only supports a 64-byte RCB, the RCB of all downstream devices must be clear, indicating an RCB of 64 bytes. If the Root Port supports a 128-byte RCB, we may optionally set the RCB of downstream devices so they know they can generate larger Completions. Some BIOSes supply an _HPX that tells us to set RCB, even though the Root Port doesn't have RCB set, which may lead to Malformed TLP errors if the Endpoint generates completions larger than the Root Port can handle. The IBM x3850 X6 with BIOS version -[A8E120CUS-1.30]- 08/22/2016 supplies such an _HPX and a Mellanox MT27500 ConnectX-3 device fails to initialize: mlx4_core 0000:41:00.0: command 0xfff timed out (go bit not cleared) mlx4_core 0000:41:00.0: device is going to be reset mlx4_core 0000:41:00.0: Failed to obtain HW semaphore, aborting mlx4_core 0000:41:00.0: Fail to reset HCA ------------[ cut here ]------------ kernel BUG at drivers/net/ethernet/mellanox/mlx4/catas.c:193! After 6cd33649 ("PCI: Add pci_configure_device() during enumeration") and 7a1562d4 ("PCI: Apply _HPX Link Control settings to all devices with a link"), we apply _HPX settings to *all* devices, not just those hot-added after boot. Before 7a1562d4, we didn't touch the Mellanox RCB, and the device worked. After 7a1562d4, we set its RCB to 128, and it failed. Set the RCB to 128 iff the Root Port supports a 128-byte RCB. Otherwise, set RCB to 64 bytes. This effectively ignores what _HPX tells us about RCB. Note that this change only affects _HPX handling. If we have no _HPX, this does nothing with RCB. [bhelgaas: changelog, clear RCB if not set for Root Port] Fixes: 6cd33649 ("PCI: Add pci_configure_device() during enumeration") Fixes: 7a1562d4 ("PCI: Apply _HPX Link Control settings to all devices with a link") Link: https://bugzilla.kernel.org/show_bug.cgi?id=187781Tested-by:
Frank Danapfel <fdanapfe@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
-
Johannes Thumshirn authored
commit e784930b upstream. Export pcie_find_root_port() so we can use it outside of PCIe-AER error injection. Signed-off-by:
-
Ding Tianhong authored
commit bedc1969 upstream. Carrying out the following steps results in a softlockup in the RCU callback-offload (rcuo) kthreads: 1. Connect to ixgbevf, and set the speed to 10Gb/s. 2. Use ifconfig to bring the nic up and down repeatedly. [ 317.005148] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 368.106005] BUG: soft lockup - CPU#1 stuck for 22s! [rcuos/1:15] [ 368.106005] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 368.106005] task: ffff88057dd8a220 ti: ffff88057dd9c000 task.ti: ffff88057dd9c000 [ 368.106005] RIP: 0010:[<ffffffff81579e04>] [<ffffffff81579e04>] fib_table_lookup+0x14/0x390 [ 368.106005] RSP: 0018:ffff88061fc83ce8 EFLAGS: 00000286 [ 368.106005] RAX: 0000000000000001 RBX: 00000000020155c0 RCX: 0000000000000001 [ 368.106005] RDX: ffff88061fc83d50 RSI: ffff88061fc83d70 RDI: ffff880036d11a00 [ 368.106005] RBP: ffff88061fc83d08 R08: 0000000000000001 R09: 0000000000000000 [ 368.106005] R10: ffff880036d11a00 R11: ffffffff819e0900 R12: ffff88061fc83c58 [ 368.106005] R13: ffffffff816154dd R14: ffff88061fc83d08 R15: 00000000020155c0 [ 368.106005] FS: 0000000000000000(0000) GS:ffff88061fc80000(0000) knlGS:0000000000000000 [ 368.106005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 368.106005] CR2: 00007f8c2aee9c40 CR3: 000000057b222000 CR4: 00000000000407e0 [ 368.106005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 368.106005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 368.106005] Stack: [ 368.106005] 00000000010000c0 ffff88057b766000 ffff8802e380b000 ffff88057af03e00 [ 368.106005] ffff88061fc83dc0 ffffffff815349a6 ffff88061fc83d40 ffffffff814ee146 [ 368.106005] ffff8802e380af00 00000000e380af00 ffffffff819e0900 020155c0010000c0 [ 368.106005] Call Trace: [ 368.106005] <IRQ> [ 368.106005] [ 368.106005] [<ffffffff815349a6>] ip_route_input_noref+0x516/0xbd0 [ 368.106005] [<ffffffff814ee146>] ? skb_release_data+0xd6/0x110 [ 368.106005] [<ffffffff814ee20a>] ? kfree_skb+0x3a/0xa0 [ 368.106005] [<ffffffff8153698f>] ip_rcv_finish+0x29f/0x350 [ 368.106005] [<ffffffff81537034>] ip_rcv+0x234/0x380 [ 368.106005] [<ffffffff814fd656>] __netif_receive_skb_core+0x676/0x870 [ 368.106005] [<ffffffff814fd868>] __netif_receive_skb+0x18/0x60 [ 368.106005] [<ffffffff814fe4de>] process_backlog+0xae/0x180 [ 368.106005] [<ffffffff814fdcb2>] net_rx_action+0x152/0x240 [ 368.106005] [<ffffffff81077b3f>] __do_softirq+0xef/0x280 [ 368.106005] [<ffffffff8161619c>] call_softirq+0x1c/0x30 [ 368.106005] <EOI> [ 368.106005] [ 368.106005] [<ffffffff81015d95>] do_softirq+0x65/0xa0 [ 368.106005] [<ffffffff81077174>] local_bh_enable+0x94/0xa0 [ 368.106005] [<ffffffff81114922>] rcu_nocb_kthread+0x232/0x370 [ 368.106005] [<ffffffff81098250>] ? wake_up_bit+0x30/0x30 [ 368.106005] [<ffffffff811146f0>] ? rcu_start_gp+0x40/0x40 [ 368.106005] [<ffffffff8109728f>] kthread+0xcf/0xe0 [ 368.106005] [<ffffffff810971c0>] ? kthread_create_on_node+0x140/0x140 [ 368.106005] [<ffffffff816147d8>] ret_from_fork+0x58/0x90 [ 368.106005] [<ffffffff810971c0>] ? kthread_create_on_node+0x140/0x140 ==================================cut here============================== It turns out that the rcuos callback-offload kthread is busy processing a very large quantity of RCU callbacks, and it is not reliquishing the CPU while doing so. This commit therefore adds an cond_resched_rcu_qs() within the loop to allow other tasks to run. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> [ paulmck: Substituted cond_resched_rcu_qs for cond_resched. ] Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Dhaval Giani <dhaval.giani@oracle.com> Signed-off-by:
-
Takashi Iwai authored
commit 3aa02cb6 upstream. Currently kill_fasync() is called outside the stream lock in snd_pcm_period_elapsed(). This is potentially racy, since the stream may get released even during the irq handler is running. Although snd_pcm_release_substream() calls snd_pcm_drop(), this doesn't guarantee that the irq handler finishes, thus the kill_fasync() call outside the stream spin lock may be invoked after the substream is detached, as recently reported by KASAN. As a quick workaround, move kill_fasync() call inside the stream lock. The fasync is rarely used interface, so this shouldn't have a big impact from the performance POV. Ideally, we should implement some sync mechanism for the proper finish of stream and irq handler. But this oneliner should suffice for most cases, so far. Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Andy Lutomirski authored
commit fc0e81b2 upstream. On the 80486 DX, it seems that some exceptions may leave garbage in the high bits of CS. This causes sporadic failures in which early_fixup_exception() refuses to fix up an exception. As far as I can tell, this has been buggy for a long time, but the problem seems to have been exacerbated by commits: 1e02ce4c ("x86: Store a per-cpu shadow copy of CR4") e1bfc11c ("x86/init: Fix cr4_init_shadow() on CR4-less machines") This appears to have broken for as long as we've had early exception handling. [ This backport should apply to kernels from 3.4 - 4.5. ] Fixes: 4c5023a3 ("x86-32: Handle exception table entries during early boot") Cc: H. Peter Anvin <hpa@zytor.com> Reported-by:
Matthew Whitehead <tedheadster@gmail.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Dmitry Vyukov authored
commit 045d599a upstream. kasan_global struct is part of compiler/runtime ABI. gcc revision 241983 has added a new field to kasan_global struct. Update kernel definition of kasan_global struct to include the new field. Without this patch KASAN is broken with gcc 7. Link: http://lkml.kernel.org/r/1479219743-28682-1-git-send-email-dvyukov@google.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
commit 529e71e1 upstream. The zram hot removal code calls idr_remove() even when zram_remove() returns an error (typically -EBUSY). This results in a leftover at the device release, eventually leading to a crash when the module is reloaded. As described in the bug report below, the following procedure would cause an Oops with zram: - provision three zram devices via modprobe zram num_devices=3 - configure a size for each device + echo "1G" > /sys/block/$zram_name/disksize - mkfs and mount zram0 only - attempt to hot remove all three devices + echo 2 > /sys/class/zram-control/hot_remove + echo 1 > /sys/class/zram-control/hot_remove + echo 0 > /sys/class/zram-control/hot_remove - zram0 removal fails with EBUSY, as expected - unmount zram0 - try zram0 hot remove again + echo 0 > /sys/class/zram-control/hot_remove - fails with ENODEV (unexpected) - unload zram kernel module + completes successfully - zram0 device node still exists - attempt to mount /dev/zram0 + mount command is killed + following BUG is encountered BUG: unable to handle kernel paging request at ffffffffa0002ba0 IP: get_disk+0x16/0x50 Oops: 0000 [#1] SMP CPU: 0 PID: 252 Comm: mount Not tainted 4.9.0-rc6 #176 Call Trace: exact_lock+0xc/0x20 kobj_lookup+0xdc/0x160 get_gendisk+0x2f/0x110 __blkdev_get+0x10c/0x3c0 blkdev_get+0x19d/0x2e0 blkdev_open+0x56/0x70 do_dentry_open.isra.19+0x1ff/0x310 vfs_open+0x43/0x60 path_openat+0x2c9/0xf30 do_filp_open+0x79/0xd0 do_sys_open+0x114/0x1e0 SyS_open+0x19/0x20 entry_SYSCALL_64_fastpath+0x13/0x94 This patch adds the proper error check in hot_remove_store() not to call idr_remove() unconditionally. Fixes: 17ec4cd9 ("zram: don't call idr_remove() from zram_remove()") Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1010970 Link: http://lkml.kernel.org/r/20161121132140.12683-1-tiwai@suse.deSigned-off-by:
David Disseldorp <ddiss@suse.de> Reported-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
