Merge tag 'for-5.3/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull more device mapper updates from Mike Snitzer:

 - Fix zone state management race in DM zoned target by eliminating the
   unnecessary DMZ_ACTIVE state.

 - A couple fixes for issues the DM snapshot target's optional discard
   support added during first week of the 5.3 merge.

 - Increase default size of outstanding IO that is allowed for a each
   dm-kcopyd client and introduce tunable to allow user adjust.

 - Update DM core to use printk ratelimiting functions rather than
   duplicate them and in doing so fix an issue where DMDEBUG_LIMIT()
   rate limited KERN_DEBUG messages had excessive "callbacks suppressed"
   messages.

* tag 'for-5.3/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: use printk ratelimiting functions
  dm kcopyd: Increase default sub-job size to 512KB
  dm snapshot: fix oversights in optional discard support
  dm zoned: fix zone state management race

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable fixes:

   - SUNRPC: Ensure bvecs are re-synced when we re-encode the RPC
     request

   - Fix an Oops in ff_layout_track_ds_error due to a PTR_ERR()
     dereference

   - Revert buggy NFS readdirplus optimisation

   - NFSv4: Handle the special Linux file open access mode

   - pnfs: Fix a problem where we gratuitously start doing I/O through
     the MDS

  Features:

   - Allow NFS client to set up multiple TCP connections to the server
     using a new 'nconnect=X' mount option. Queue length is used to
     balance load.

   - Enhance statistics reporting to report on all transports when using
     multiple connections.

   - Speed up SUNRPC by removing bh-safe spinlocks

   - Add a mechanism to allow NFSv4 to request that containers set a
     unique per-host identifier for when the hostname is not set.

   - Ensure NFSv4 updates the lease_time after a clientid update

  Bugfixes and cleanup:

   - Fix use-after-free in rpcrdma_post_recvs

   - Fix a memory leak when nfs_match_client() is interrupted

   - Fix buggy file access checking in NFSv4 open for execute

   - disable unsupported client side deduplication

   - Fix spurious client disconnections

   - Fix occasional RDMA transport deadlock

   - Various RDMA cleanups

   - Various tracepoint fixes

   - Fix the TCP callback channel to guarantee the server can actually
     send the number of callback requests that was negotiated at mount
     time"

* tag 'nfs-for-5.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (68 commits)
  pnfs/flexfiles: Add tracepoints for detecting pnfs fallback to MDS
  pnfs: Fix a problem where we gratuitously start doing I/O through the MDS
  SUNRPC: Optimise transport balancing code
  SUNRPC: Ensure the bvecs are reset when we re-encode the RPC request
  pnfs/flexfiles: Fix PTR_ERR() dereferences in ff_layout_track_ds_error
  NFSv4: Don't use the zero stateid with layoutget
  SUNRPC: Fix up backchannel slot table accounting
  SUNRPC: Fix initialisation of struct rpc_xprt_switch
  SUNRPC: Skip zero-refcount transports
  SUNRPC: Replace division by multiplication in calculation of queue length
  NFSv4: Validate the stateid before applying it to state recovery
  nfs4.0: Refetch lease_time after clientid update
  nfs4: Rename nfs41_setup_state_renewal
  nfs4: Make nfs4_proc_get_lease_time available for nfs4.0
  nfs: Fix copy-and-paste error in debug message
  NFS: Replace 16 seq_printf() calls by seq_puts()
  NFS: Use seq_putc() in nfs_show_stats()
  Revert "NFS: readdirplus optimization by cache mechanism" (memleak)
  SUNRPC: Fix transport accounting when caller specifies an rpc_xprt
  NFS: Record task, client ID, and XID in xdr_status trace points
  ...

Add tracepoints to allow debugging of the event chain leading to
a pnfs fallback to doing I/O through the MDS.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If the client has to stop in pnfs_update_layout() to wait for another
layoutget to complete, it currently exits and defaults to I/O through
the MDS if the layoutget was successful.

Fixes: d03360aa ("pNFS: Ensure we return the error if someone kills...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+

Pull RISC-V updates from Paul Walmsley:

 - Hugepage support

 - "Image" header support for RISC-V kernel binaries, compatible with
   the current ARM64 "Image" header

 - Initial page table setup now split into two stages

 - CONFIG_SOC support (starting with SiFive SoCs)

 - Avoid reserving memory between RAM start and the kernel in
   setup_bootmem()

 - Enable high-res timers and dynamic tick in the RV64 defconfig

 - Remove long-deprecated gate area stubs

 - MAINTAINERS updates to switch to the newly-created shared RISC-V git
   tree, and to fix a get_maintainers.pl issue for patches involving
   SiFive E-mail addresses

Also, one integration fix to resolve a build problem introduced during
in the v5.3-rc1 merge window:

 - Fix build break after macro-to-function conversion in
   asm-generic/cacheflush.h

* tag 'riscv/for-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: fix build break after macro-to-function conversion in generic cacheflush.h
  RISC-V: Add an Image header that boot loader can parse.
  RISC-V: Setup initial page tables in two stages
  riscv: remove free_initrd_mem
  riscv: ccache: Remove unused variable
  riscv: Introduce huge page support for 32/64bit kernel
  x86, arm64: Move ARCH_WANT_HUGE_PMD_SHARE config in arch/Kconfig
  RISC-V: Fix memory reservation in setup_bootmem()
  riscv: defconfig: enable SOC_SIFIVE
  riscv: select SiFive platform drivers with SOC_SIFIVE
  arch: riscv: add config option for building SiFive's SoC resource
  riscv: Remove gate area stubs
  MAINTAINERS: change the arch/riscv git tree to the new shared tree
  MAINTAINERS: don't automatically patches involving SiFive to the linux-riscv list
  RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERS

Pull parisc fixes from Helge Deller:

 - Prevent kernel panics by adding proper checking of register values
   injected via the ptrace interface

 - Wire up the new clone3 syscall

* 'parisc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Wire up clone3 syscall
  parisc: Avoid kernel panic triggered by invalid kprobe
  parisc: Ensure userspace privilege for ptraced processes in regset functions
  parisc: Fix kernel panic due invalid values in IAOQ0 or IAOQ1

Pull module updates from Jessica Yu:
 "Summary of modules changes for the 5.3 merge window:

   - Code fixes and cleanups

   - Fix bug where set_memory_x() wasn't being called when rodata=n

   - Fix bug where -EEXIST was being returned for going modules

   - Allow arches to override module_exit_section()"

* tag 'modules-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  modules: fix compile error if don't have strict module rwx
  ARM: module: recognize unwind exit sections
  module: allow arch overrides for .exit section names
  modules: fix BUG when load module with rodata=n
  kernel/module: Fix mem leak in module_add_modinfo_attrs
  kernel: module: Use struct_size() helper
  kernel/module.c: Only return -EEXIST for modules that have finished loading

Pull tracing updates from Steven Rostedt:
 "The main changes in this release include:

   - Add user space specific memory reading for kprobes

   - Allow kprobes to be executed earlier in boot

  The rest are mostly just various clean ups and small fixes"

* tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  tracing: Make trace_get_fields() global
  tracing: Let filter_assign_type() detect FILTER_PTR_STRING
  tracing: Pass type into tracing_generic_entry_update()
  ftrace/selftest: Test if set_event/ftrace_pid exists before writing
  ftrace/selftests: Return the skip code when tracing directory not configured in kernel
  tracing/kprobe: Check registered state using kprobe
  tracing/probe: Add trace_event_call accesses APIs
  tracing/probe: Add probe event name and group name accesses APIs
  tracing/probe: Add trace flag access APIs for trace_probe
  tracing/probe: Add trace_event_file access APIs for trace_probe
  tracing/probe: Add trace_event_call register API for trace_probe
  tracing/probe: Add trace_probe init and free functions
  tracing/uprobe: Set print format when parsing command
  tracing/kprobe: Set print format right after parsed command
  kprobes: Fix to init kprobes in subsys_initcall
  tracepoint: Use struct_size() in kmalloc()
  ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS
  ftrace: Enable trampoline when rec count returns back to one
  tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline
  tracing: Make a separate config for trace event self tests
  ...

Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "One compiler fix, and a bug-fix in swiotlb_nr_tbl() and
  swiotlb_max_segment() to check also for no_iotlb_memory"

* 'for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: fix phys_addr_t overflow warning
  swiotlb: Return consistent SWIOTLB segments/nr_tbl
  swiotlb: Group identical cleanup in swiotlb_cleanup()

Moves the balancing code to avoid doing cursor changes on every search
iteration.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

The bvec tracks the list of pages, so if the number of pages changes
due to a re-encode, we need to reset the bvec as well.

Fixes: 277e4ab7 ("SUNRPC: Simplify TCP receive code by switching...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+

mirror->mirror_ds can be NULL if uninitialised, but can contain
a PTR_ERR() if call to GETDEVICEINFO failed.

Fixes: 65990d1a ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # 4.10+

The NFSv4.1 protocol explicitly forbids us from using the zero stateid
together with layoutget, so when we see that nfs4_select_rw_stateid()
is unable to return a valid delegation, lock or open stateid, then
we should initiate recovery and retry.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Pull xfs cleanups from Darrick Wong:
 "We had a few more lateish cleanup patches come in for 5.3 -- a couple
  of syncups with the userspace libxfs code and a conversion of the XFS
  administrator's guide to ReST format.

  Summary:

   - Bring fs/xfs/libxfs/xfs_trans_inode.c in sync with userspace
     libxfs.

   - Convert the xfs administrator guide to rst and move it into the
     official admin guide under Documentation"

* tag 'xfs-5.3-merge-13' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  Documentation: filesystem: Convert xfs.txt to ReST
  xfs: sync up xfs_trans_inode with userspace
  xfs: move xfs_trans_inode.c to libxfs/

Pull cifs updates from Steve French:
 "Fixes (three for stable) and improvements including much faster
  encryption (SMB3.1.1 GCM)"

* tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
  smb3: smbdirect no longer experimental
  cifs: fix crash in smb2_compound_op()/smb2_set_next_command()
  cifs: fix crash in cifs_dfs_do_automount
  cifs: fix parsing of symbolic link error response
  cifs: refactor and clean up arguments in the reparse point parsing
  SMB3: query inode number on open via create context
  smb3: Send netname context during negotiate protocol
  smb3: do not send compression info by default
  smb3: add new mount option to retrieve mode from special ACE
  smb3: Allow query of symlinks stored as reparse points
  cifs: Fix a race condition with cifs_echo_request
  cifs: always add credits back for unsolicited PDUs
  fs: cifs: cifsssmb: Change return type of convert_ace_to_cifs_ace
  add some missing definitions
  cifs: fix typo in debug message with struct field ia_valid
  smb3: minor cleanup of compound_send_recv
  CIFS: Fix module dependency
  cifs: simplify code by removing CONFIG_CIFS_ACL ifdef
  cifs: Fix check for matching with existing mount
  cifs: Properly handle auto disabling of serverino option
  ...

Pull ceph updates from Ilya Dryomov:
 "Lots of exciting things this time!

   - support for rbd object-map and fast-diff features (myself). This
     will speed up reads, discards and things like snap diffs on sparse
     images.

   - ceph.snap.btime vxattr to expose snapshot creation time (David
     Disseldorp). This will be used to integrate with "Restore Previous
     Versions" feature added in Windows 7 for folks who reexport ceph
     through SMB.

   - security xattrs for ceph (Zheng Yan). Only selinux is supported for
     now due to the limitations of ->dentry_init_security().

   - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
     Layton). This is actually a single feature bit which was missing
     because of the filesystem pieces. With this in, the kernel client
     will finally be reported as "luminous" by "ceph features" -- it is
     still being reported as "jewel" even though all required Luminous
     features were implemented in 4.13.

   - stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
     with xattrs is to not terminate and this was causing
     inconsistencies with ceph-fuse.

   - change filesystem time granularity from 1 us to 1 ns, again fixing
     an inconsistency with ceph-fuse (Luis Henriques).

  On top of this there are some additional dentry name handling and cap
  flushing fixes from Zheng. Finally, Jeff is formally taking over for
  Zheng as the filesystem maintainer"

* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
  ceph: fix end offset in truncate_inode_pages_range call
  ceph: use generic_delete_inode() for ->drop_inode
  ceph: use ceph_evict_inode to cleanup inode's resource
  ceph: initialize superblock s_time_gran to 1
  MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
  rbd: setallochint only if object doesn't exist
  rbd: support for object-map and fast-diff
  rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
  libceph: export osd_req_op_data() macro
  libceph: change ceph_osdc_call() to take page vector for response
  libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
  rbd: new exclusive lock wait/wake code
  rbd: quiescing lock should wait for image requests
  rbd: lock should be quiesced on reacquire
  rbd: introduce copyup state machine
  rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
  rbd: move OSD request allocation into object request state machines
  rbd: factor out __rbd_osd_setup_discard_ops()
  rbd: factor out rbd_osd_setup_copyup()
  rbd: introduce obj_req->osd_reqs list
  ...

Pull dax updates from Dan Williams:
 "The fruits of a bug hunt in the fsdax implementation with Willy and a
  small feature update for device-dax:

   - Fix a hang condition that started triggering after the Xarray
     conversion of fsdax in the v4.20 kernel.

   - Add a 'resource' (root-only physical base address) sysfs attribute
     to device-dax instances to correlate memory-blocks onlined via the
     kmem driver with a given device instance"

* tag 'dax-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Fix missed wakeup with PMD faults
  device-dax: Add a 'resource' attribute

Pull libnvdimm updates from Dan Williams:
 "Primarily just the virtio_pmem driver:

   - virtio_pmem

     The new virtio_pmem facility introduces a paravirtualized
     persistent memory device that allows a guest VM to use DAX
     mechanisms to access a host-file with host-page-cache. It arranges
     for MAP_SYNC to be disabled and instead triggers a host fsync()
     when a 'write-cache flush' command is sent to the virtual disk
     device.

   - Miscellaneous small fixups"

* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  virtio_pmem: fix sparse warning
  xfs: disable map_sync for async flush
  ext4: disable map_sync for async flush
  dax: check synchronous mapping is supported
  dm: enable synchronous dax
  libnvdimm: add dax_dev sync flag
  virtio-pmem: Add virtio pmem driver
  libnvdimm: nd_region flush callback support
  libnvdimm, namespace: Drop uuid_t implementation detail

Pull watchdog updates from Wim Van Sebroeck:

 - add Allwinner H6 watchdog

 - drop warning after registering device patches

 - hpwdt improvements

 - gpio: add support for nowayout option

 - introduce CONFIG_WATCHDOG_OPEN_TIMEOUT

 - convert remaining drivers to use SPDX license identifier

 - Fixes and improvements on several watchdog device drivers

* tag 'linux-watchdog-5.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits)
  watchdog: digicolor_wdt: Remove unused variable in dc_wdt_probe
  watchdog: ie6xx_wdt: Use spinlock_t instead of struct spinlock
  watchdog: atmel: atmel-sama5d4-wdt: Disable watchdog on system suspend
  watchdog: convert remaining drivers to use SPDX license identifier
  dt-bindings: watchdog: Rename bindings documentation file
  watchdog: mei_wdt: no need to check return value of debugfs_create functions
  watchdog: bcm_kona_wdt: no need to check return value of debugfs_create functions
  docs: watchdog: Fix build error.
  docs: watchdog: convert docs to ReST and rename to *.rst
  watchdog: make the device time out at open_deadline when open_timeout is used
  watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT
  watchdog: introduce watchdog.open_timeout commandline parameter
  dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU
  watchdog: imx_sc: Add pretimeout support
  watchdog: renesas_wdt: Add a few cycles delay
  watchdog: gpio: add support for nowayout option
  watchdog: renesas_wdt: Use 'dev' instead of dereferencing it repeatedly
  dt-bindings: watchdog: add Allwinner H6 watchdog
  watchdog: jz4740: Avoid starting watchdog in set_timeout
  watchdog: jz4740: Use register names from <linux/mfd/ingenic-tcu.h>
  ...

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes.

   - The optimization of PM resume with HD-audio HDMI codecs, which
     eventually work around weird issues

   - A correction of Intel Icelake HDMI audio code

   - Quirks for Dell machines with Realtek HD-audio codecs

   - The fix for too long sequencer write stall that was spotted by
     syzkaller

   - A few trivial cleanups reported by coccinelle"

* tag 'sound-fix-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Don't resume forcibly i915 HDMI/DP codec
  ALSA: hda/hdmi - Fix i915 reverse port/pin mapping
  ALSA: hda/hdmi - Remove duplicated define
  ALSA: seq: Break too long mutex context in the write loop
  ALSA: hda/realtek: apply ALC891 headset fixup to one Dell machine
  ALSA: rme9652: Unneeded variable: "result".
  ALSA: emu10k1: Remove unneeded variable "change"
  ALSA: au88x0: Remove unneeded variable: "changed"
  ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform
  ALSA: ps3: Remove Unneeded variable: "ret"
  ALSA: lx6464es: Remove unneeded variable err

Pull more power management updates from Rafael Wysocki:
 "These modify the Intel RAPL driver to allow it to use an MMIO
  interface to the hardware, make the int340X thermal driver provide
  such an interface for it, add Intel Ice Lake CPU IDs to the RAPL
  driver (these changes depend on the previously merged x86 arch
  changes), update cpufreq to use the PM QoS framework for managing the
  min and max frequency limits, and add update the imx-cpufreq-dt
  cpufreq driver to support i.MX8MN.

  Specifics:

   - Add MMIO interface support to the Intel RAPL power capping driver
     and update the int340X thermal driver to provide a RAPL MMIO
     interface (Zhang Rui, Stephen Rothwell).

   - Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui, Rajneesh
     Bhardwaj).

   - Make cpufreq use the PM QoS framework (instead of notifiers) for
     managing the min and max frequency constraints (Viresh Kumar).

   - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
     Huang)"

* tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
  cpufreq: Make cpufreq_generic_init() return void
  intel_rapl: need linux/cpuhotplug.h for enum cpuhp_state
  powercap/rapl: Add Ice Lake NNPI support to RAPL driver
  powercap/intel_rapl: add support for ICX-D
  powercap/intel_rapl: add support for ICX
  powercap/intel_rapl: add support for IceLake desktop
  intel_rapl: Fix module autoloading issue
  int340X/processor_thermal_device: add support for MMIO RAPL
  intel_rapl: support two power limits for every RAPL domain
  intel_rapl: support 64 bit register
  intel_rapl: abstract RAPL common code
  intel_rapl: cleanup hardcoded MSR access
  intel_rapl: cleanup some functions
  intel_rapl: abstract register access operations
  intel_rapl: abstract register address
  intel_rapl: introduce struct rapl_if_private
  intel_rapl: introduce intel_rapl.h
  intel_rapl: remove hardcoded register index
  intel_rapl: use reg instead of msr
  cpufreq: imx-cpufreq-dt: Add i.MX8MN support
  ...

Pull more ACPI updates from Rafael Wysocki:
 "These get rid of two clang warnings, add a new quirk mechanism to the
  ACPI backlight driver (and apply it to one machine) and update the
  table load object initialization in ACPICA (this is a replacement for
  a previously reverted ACPICA commit).

  Specifics:

   - Make ACPI table loading work more consistently regardless of the
     exact mechanism used for loading a table (Erik Schmauss).

   - Get rid of two clang warnings (Arnd Bergmann).

   - Add new quirk mechanism to the ACPI backlight driver and use it to
     add a quirk for PB Easynote MZ35 (Hans de Goede)"

* tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
  ACPI: fix false-positive -Wuninitialized warning
  ACPI: blacklist: fix clang warning for unused DMI table
  ACPICA: Update table load object initialization

Merge floppy ioctl verification fixes from Denis Efremov.

This also marks the floppy driver as orphaned - it turns out that Jiri
no longer has working hardware.

Actual working physical floppy hardware is getting hard to find, and
while Willy was able to test this, I think the driver can be considered
pretty much dead from an actual hardware standpoint.  The hardware that
is still sold seems to be mainly USB-based, which doesn't use this
legacy driver at all.

The old floppy disk controller is still emulated in various VM
environments, so the driver isn't going away, but let's see if anybody
is interested to step up to maintain it.

The lack of hardware also likely means that the ioctl range verification
fixes are probably mostly relevant to anybody using floppies in a
virtual environment.  Which is probably also going away in favor of USB
storage emulation, but who knows.

Will Decon reviewed the patches but I'm not rebasing them just for that,
so I'll add a
Reviewed-by: Will Deacon <will@kernel.org>

here instead.

* floppy:
  MAINTAINERS: mark floppy.c orphaned
  floppy: fix out-of-bounds read in copy_buffer
  floppy: fix invalid pointer dereference in drive_name
  floppy: fix out-of-bounds read in next_valid_format
  floppy: fix div-by-zero in setup_format_params

I volunteered myself to maintain it quite some time ago back when I
fixed the concurrency issues which exhibited itself only with
VM-emulated devices, and at the same time I still had the physical 3.5"
reader to test all the changes.

The reader doesn't work any more though, so I guess it's time to step
down from this super-prestigious role :p and mark floppy.c as Orphaned.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit c296d4dc ("asm-generic: fix a compilation warning")
converted the various flush_*cache_* macros in
asm-generic/cacheflush.h to static inline functions.  This breaks
RISC-V builds, since RISC-V's cacheflush.h includes the generic
cacheflush.h and then undefines the macros to be overridden.

Fix by copying the subset of the no-op functions that are reused from
the generic cacheflush.h into the RISC-V cacheflush.h, and dropping
the include of the generic cacheflush.h.

Fixes: c296d4dc ("asm-generic: fix a compilation warning")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>

* acpi-misc:
  ACPI: fix false-positive -Wuninitialized warning
  ACPI: blacklist: fix clang warning for unused DMI table

* acpi-video:
  ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35

* pm-cpufreq:
  cpufreq: Make cpufreq_generic_init() return void
  cpufreq: imx-cpufreq-dt: Add i.MX8MN support
  cpufreq: Add QoS requests for userspace constraints
  cpufreq: intel_pstate: Reuse refresh_frequency_limits()
  cpufreq: Register notifiers with the PM QoS framework
  PM / QoS: Add support for MIN/MAX frequency constraints
  PM / QOS: Pass request type to dev_pm_qos_read_value()
  PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value()
  PM / QOS: Pass request type to dev_pm_qos_{add|remove}_notifier()

Add a per-transport maximum limit in the socket case, and add
helpers to allow the NFSv4 code to discover that limit.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Ensure that we do initialise the fields xps_nactive, xps_queuelen
and xps_net.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

This fixes a global out-of-bounds read access in the copy_buffer
function of the floppy driver.

The FDDEFPRM ioctl allows one to set the geometry of a disk.  The sect
and head fields (unsigned int) of the floppy_drive structure are used to
compute the max_sector (int) in the make_raw_rw_request function.  It is
possible to overflow the max_sector.  Next, max_sector is passed to the
copy_buffer function and used in one of the memcpy calls.

An unprivileged user could trigger the bug if the device is accessible,
but requires a floppy disk to be inserted.

The patch adds the check for the .sect * .head multiplication for not
overflowing in the set_geometry function.

The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes the invalid pointer dereference in the drive_name function of
the floppy driver.

The native_format field of the struct floppy_drive_params is used as
floppy_type array index in the drive_name function.  Thus, the field
should be checked the same way as the autodetect field.

To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl.  Next, FDGETDRVTYP ioctl should
be used to call the drive_name.  A floppy disk is not required to be
inserted.

CAP_SYS_ADMIN is required to call FDSETDRVPRM.

The patch adds the check for a value of the native_format field to be in
the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array
indices.

The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes a global out-of-bounds read access in the next_valid_format
function of the floppy driver.

The values from autodetect field of the struct floppy_drive_params are
used as indices for the floppy_type array in the next_valid_format
function 'floppy_type[DP->autodetect[probed_format]].sect'.

To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl.  A floppy disk is not required to
be inserted.

CAP_SYS_ADMIN is required to call FDSETDRVPRM.

The patch adds the check for values of the autodetect field to be in the
'0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices.

The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes a divide by zero error in the setup_format_params function of
the floppy driver.

Two consecutive ioctls can trigger the bug: The first one should set the
drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK
to become zero.  Next, the floppy format operation should be called.

A floppy disk is not required to be inserted.  An unprivileged user
could trigger the bug if the device is accessible.

The patch checks F_SECT_PER_TRACK for a non-zero value in the
set_geometry function.  The proper check should involve a reasonable
upper limit for the .sect and .rate fields, but it could change the
UAPI.

The patch also checks F_SECT_PER_TRACK in the setup_format_params, and
cancels the formatting operation in case of zero.

The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Christian Brauner <christian@brauner.io>

When running gdb I was able to trigger this kernel panic:

 Kernel Fault: Code=26 (Data memory access rights trap) at addr 0000000000000060
 CPU: 0 PID: 1401 Comm: gdb-crash Not tainted 5.2.0-rc7-64bit+ #1053

      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
 PSW: 00001000000001000000000000001111 Not tainted
 r00-03  000000000804000f 0000000040dee1a0 0000000040c78cf0 00000000b8d50160
 r04-07  0000000040d2b1a0 000000004360a098 00000000bbbe87b8 0000000000000003
 r08-11  00000000fac20a70 00000000fac24160 00000000fac1bbe0 0000000000000000
 r12-15  00000000fabfb79a 00000000fac244a4 0000000000010000 0000000000000001
 r16-19  00000000bbbe87b8 00000000f8f02910 0000000000010034 0000000000000000
 r20-23  00000000fac24630 00000000fac24630 000000006474e552 00000000fac1aa52
 r24-27  0000000000000028 00000000bbbe87b8 00000000bbbe87b8 0000000040d2b1a0
 r28-31  0000000000000000 00000000b8d501c0 00000000b8d501f0 0000000003424000
 sr00-03  0000000000423000 0000000000000000 0000000000000000 0000000000423000
 sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000

 IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040c78cf0 0000000040c78cf4
  IIR: 539f00c0    ISR: 0000000000000000  IOR: 0000000000000060
  CPU:        0   CR30: 00000000b8d50000 CR31: 00000000d22345e2
  ORIG_R28: 0000000040250798
  IAOQ[0]: parisc_kprobe_ss_handler+0x58/0x170
  IAOQ[1]: parisc_kprobe_ss_handler+0x5c/0x170
  RP(r2): parisc_kprobe_ss_handler+0x58/0x170
 Backtrace:
  [<0000000040206ff8>] handle_interruption+0x178/0xbb8
 Kernel panic - not syncing: Kernel Fault

Avoid this panic by checking the return value of kprobe_running() and
skip kprobe if none is currently active.

Cc: <stable@vger.kernel.org> # v5.2
Acked-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>

On parisc the privilege level of a process is stored in the lowest two bits of
the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0
for the kernel and privilege level 3 for user-space. So userspace should not be
allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege
level to e.g. 0 to try to gain kernel privileges.

This patch prevents such modifications in the regset support functions by
always setting the two lowest bits to one (which relates to privilege level 3
for user-space) if IAOQ0 or IAOQ1 are modified via ptrace regset calls.

Link: https://bugs.gentoo.org/481768
Cc: <stable@vger.kernel.org> # v4.7+
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>

On parisc the privilege level of a process is stored in the lowest two bits of
the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0
for the kernel and privilege level 3 for user-space. So userspace should not be
allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege
level to e.g. 0 to try to gain kernel privileges.

This patch prevents such modifications by always setting the two lowest bits to
one (which relates to privilege level 3 for user-space) if IAOQ0 or IAOQ1 are
modified via ptrace calls in the native and compat ptrace paths.

Link: https://bugs.gentoo.org/481768Reported-by: Jeroen Roovers <jer@gentoo.org>
Cc: <stable@vger.kernel.org>
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull another x86 platform driver update from Andy Shevchenko:
 "Provide better naming for ABI, i.e. tell that we have fan boost mode.

  It won't break any ABI, but has to be done now to avoid confusion in
  the future"

* tag 'platform-drivers-x86-v5.3-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: asus: Rename "fan mode" to "fan boost mode"

Pull thermal management updates from Zhang Rui:

 - Convert thermal documents to ReST (Mauro Carvalho Chehab)

 - Fix a cyclic depedency in between thermal core and governors (Daniel
   Lezcano)

 - Fix processor_thermal_device driver to re-evaluate power limits after
   resume (Srinivas Pandruvada, Zhang Rui)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  drivers: thermal: processor_thermal_device: Fix build warning
  docs: thermal: convert to ReST
  thermal/drivers/core: Use governor table to initialize
  thermal/drivers/core: Add init section table for self-encapsulation
  drivers: thermal: processor_thermal: Read PPCC on resume

Pull GPIO fixes from Linus Walleij:

 - Revert a SPIO GPIO fix that didn't fix anything but instead created
   new problems.

 - Remove the EM GPIO irqdomain in a safe manner.

 - Fix a memory leak in the gpio quirks.

 - Make the DaVinci error path silent on probe deferral.

* tag 'gpio-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  Revert "gpio/spi: Fix spi-gpio regression on active high CS"
  gpio: em: remove the gpiochip before removing the irq domain
  gpiolib: of: fix a memory leak in of_gpio_flags_quirks()
  gpio: davinci: silence error prints in case of EPROBE_DEFER