- 30 Mar, 2018 1 commit
-
-
George Cherian authored
With commit e948bc8f (cpufreq: Cap the default transition delay value to 10 ms) the cpufreq was not honouring the delay passed via ACPI (PCCT). Due to which on ARM based platforms using CPPC the cpufreq governor tries to change the frequency of CPUs faster than expected. This leads to continuous error messages like the following. " ACPI CPPC: PCC check channel failed. Status=0 " Earlier (without above commit) the default transition delay was taken form the value passed from PCCT. Use the same value provided by PCCT to set the transition_delay_us. Fixes: e948bc8f (cpufreq: Cap the default transition delay value to 10 ms) Signed-off-by:
George Cherian <george.cherian@cavium.com> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 20 Mar, 2018 26 commits
-
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from tegra186 driver. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from speedstep driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from sparc driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from sh-cpufreq driver. The driver though prints the min/max frequency values and the same is done from the ->ready() callback now to keep the behavior unchanged. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from sfi driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from scpi driver. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Tested-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from sc520 driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from s3c24xx driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from qoirq driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from pxa driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from ppc_cbe driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from powernow driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from p4-clockmod driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from mediatek driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from longhaul driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from ia64-acpi driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from elanfreq driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from e_powersaver driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from cpufreq-dt driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from brcmstb driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from arm_big_little driver. Signed-off-by:
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table in the acpi-cpufreq driver. The driver needs to crosscheck if the max frequency corresponds to the P-state 0 or not and the same is done from the ->ready() callback now. Signed-off-by:
-
Viresh Kumar authored
The cpufreq table is already validated by the cpufreq core and none of the users of cpufreq_generic_init() have any dependency on it to validate the table as well. Don't validate the cpufreq table anymore from cpufreq_generic_init(). Signed-off-by:
-
Viresh Kumar authored
This is a preparatory commit to make policy->suspend_freq independent of validation of the cpufreq table, as a later commit would update cpufreq_generic_init() to not validate the cpufreq table any longer. The driver already assumes the order in which the frequency table is sorted and we can get the max frequency easily. Signed-off-by:
-
Arnd Bergmann authored
A built-in scpi cpufreq driver cannot link against a modular thermal framework: drivers/cpufreq/scpi-cpufreq.o: In function `scpi_cpufreq_ready': scpi-cpufreq.c:(.text+0x4c): undefined reference to `of_cpufreq_cooling_register' drivers/cpufreq/scpi-cpufreq.o: In function `scpi_cpufreq_exit': scpi-cpufreq.c:(.text+0x9c): undefined reference to `cpufreq_cooling_unregister' This adds a Kconfig dependency that makes sure this configuration is not possible, while allowing all configurations that can work. Note that disabling CPU_THERMAL means we don't care about the THERMAL dependency. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Chunyu Hu authored
Kmemleak reported the below leak. When cppc_cpufreq_init went into failure path, the cpu mask is not freed. After fix, this report is gone. And to avaoid potential NULL pointer reference, check the cpu value first. unreferenced object 0xffff800fd5ea4880 (size 128): comm "swapper/0", pid 1, jiffies 4294939510 (age 668.680s) hex dump (first 32 bytes): 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 .... ........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffff0000082c4ae4>] __kmalloc_node+0x278/0x634 [<ffff0000088f4a74>] alloc_cpumask_var_node+0x28/0x60 [<ffff0000088f4af0>] zalloc_cpumask_var+0x14/0x1c [<ffff000008d20254>] cppc_cpufreq_init+0xd0/0x19c [<ffff000008083828>] do_one_initcall+0xec/0x15c [<ffff000008cd1018>] kernel_init_freeable+0x1f4/0x2a4 [<ffff0000089099b0>] kernel_init+0x18/0x10c [<ffff000008084d50>] ret_from_fork+0x10/0x18 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by:Chunyu Hu <chuhu@redhat.com> Acked-by:
-
- 18 Mar, 2018 1 commit
-
-
Viresh Kumar authored
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from powernv driver. Signed-off-by:
-
- 05 Mar, 2018 1 commit
-
-
Rafael J. Wysocki authored
-
- 27 Feb, 2018 11 commits
-
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. WARNING: void function return statements are not generally useful Thus remove such a statement in the affected functions. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Viresh Kumar authored
There are two clusters (2 + 4 CPUs) on this platform and a separate cpufreq policy is available for each of the CPUs. The loop in tegra186_cpufreq_init() tries to find the structure for the right CPU and finish initialization. But it is missing a `break` statement at the end, which forces it to restart the loop even when the CPU already matched and initialization is done. Fix that by adding the missing `break` statement. Signed-off-by:
Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by:
-
Viresh Kumar authored
By design, cpufreq drivers are responsible for calling cpufreq_frequency_table_cpuinfo() from their ->init() callbacks to validate the frequency table. However, if a cpufreq driver is buggy and fails to do so properly, it lead to unexpected behavior of the driver or the cpufreq core at a later point in time. It would be better if the core could validate the frequency table during driver initialization. To that end, introduce cpufreq_table_validate_and_sort() and make the cpufreq core call it right after invoking the ->init() callback of the driver and destroy the cpufreq policy if the table is invalid. For the time being the validation of the table happens twice, once from the driver and then from the core. The individual drivers will be updated separately to drop table validation if they don't need it for other reasons. The frequency table is marked "sorted" or "unsorted" by the new helper now instead of in cpufreq_table_validate_and_show(), as it should only be done after validating the table (which the drivers won't do going forward). Signed-off-by:
-
Viresh Kumar authored
Ideally the de-allocation of resources should happen in the exact opposite order in which they were allocated. It helps maintain the code in long term, even if nothing really breaks with incorrect ordering. That wasn't followed in cpufreq_online() and it has some inconsistencies. For example, the symlinks were created from within the locked region while they are removed only after putting the locks. Also ->exit() should have been called only after the symlinks are removed and the lock is dropped, as that was the case when ->init() was first called. Signed-off-by:
-
Viresh Kumar authored
With multi-platform build images, this shows a message on non mediatek platforms, which is unnecessary. Convert pr_warn() to pr_debug() here. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Viresh Kumar authored
The "cooling-min-level" and "cooling-max-level" properties are not parsed by any part of kernel currently and the max cooling state of a CPU cooling device is found by referring to the cpufreq table instead. Remove the unused bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Viresh Kumar authored
The "cooling-min-level" and "cooling-max-level" properties are not parsed by any part of the kernel currently and the max cooling state of a CPU cooling device is found by referring to the cpufreq table instead. Remove the unused properties from the CPU nodes. Signed-off-by:
-
Viresh Kumar authored
commit a307a1e6 "cpufreq: s3c: use cpufreq_generic_init()" accidentally broke cpufreq on s3c2410 and s3c2412. These two platforms don't have a CPU frequency table and used to skip calling cpufreq_table_validate_and_show() for them. But with the above commit, we started calling it unconditionally and that will eventually fail as the frequency table pointer is NULL. Fix this by calling cpufreq_table_validate_and_show() conditionally again. Fixes: a307a1e6 "cpufreq: s3c: use cpufreq_generic_init()" Cc: 3.13+ <stable@vger.kernel.org> # v3.13+ Signed-off-by:
-
