Pull x86/boot changes from Ingo Molnar:
 "Kernel image size reduction and assorted fixes and other small
  improvements."

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, doc: Assign a bootloader ID for "Minimal Linux Bootloader"
  x86, boot: Exclude cmdline.c if you can't use it
  x86, boot: Exclude early_serial_console.c if can't use it.
  x86, boot: Removed unused debug flag and set code
  x86, boot: Switch output functions from command-line flags to conditional compilation
  x86, boot: Changed error putstr path to match new debug_putstr format
  x86, boot: Wrap debug printing in a new debug_putstr function
  x86, boot: Removed quiet flag and switched quiet output to debug flag

Pull scheduler changes from Ingo Molnar:
 "The biggest change is a performance improvement on SMP systems:

  | 4 socket 40 core + SMT Westmere box, single 30 sec tbench
  | runs, higher is better:
  |
  | clients     1       2       4        8       16       32       64      128
  |..........................................................................
  | pre        30      41     118      645     3769     6214    12233    14312
  | post      299     603    1211     2418     4697     6847    11606    14557
  |
  | A nice increase in performance.

  which speedup is particularly noticeable on heavily interacting
  few-tasks workloads, so the changes should help desktop-style Xorg
  workloads and interactivity as well, on multi-core CPUs.

  There are also cpuset suspend behavior fixes/restructuring and various
  smaller tweaks."

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix race in task_group()
  sched: Improve balance_cpu() to consider other cpus in its group as target of (pinned) task
  sched: Reset loop counters if all tasks are pinned and we need to redo load balance
  sched: Reorder 'struct lb_env' members to reduce its size
  sched: Improve scalability via 'CPU buddies', which withstand random perturbations
  cpusets: Remove/update outdated comments
  cpusets, hotplug: Restructure functions that are invoked during hotplug
  cpusets, hotplug: Implement cpuset tree traversal in a helper function
  CPU hotplug, cpusets, suspend: Don't modify cpusets during suspend/resume
  sched/x86: Remove broken power estimation

Pull crypto updates from Herbert Xu:

 - Fixed algorithm construction hang when self-test fails.
 - Added SHA variants to talitos AEAD list.
 - New driver for Exynos random number generator.
 - Performance enhancements for arc4.
 - Added hwrng support to caam.
 - Added ahash support to caam.
 - Fixed bad kfree in aesni-intel.
 - Allow aesni-intel in FIPS mode.
 - Added atmel driver with support for AES/3DES/SHA.
 - Bug fixes for mv_cesa.
 - CRC hardware driver for BF60x family processors.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits)
  crypto: twofish-avx - remove useless instruction
  crypto: testmgr - add aead cbc aes hmac sha1,256,512 test vectors
  crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms
  crypto: talitos - export the talitos_submit function
  crypto: talitos - move talitos structures to header file
  crypto: atmel - add new tests to tcrypt
  crypto: atmel - add Atmel SHA1/SHA256 driver
  crypto: atmel - add Atmel DES/TDES driver
  crypto: atmel - add Atmel AES driver
  ARM: AT91SAM9G45: add crypto peripherals
  crypto: testmgr - allow aesni-intel and ghash_clmulni-intel in fips mode
  hwrng: exynos - Add support for Exynos random number generator
  crypto: aesni-intel - fix wrong kfree pointer
  crypto: caam - ERA retrieval and printing for SEC device
  crypto: caam - Using alloc_coherent for caam job rings
  crypto: algapi - Fix hang on crypto allocation
  crypto: arc4 - now arc needs blockcipher support
  crypto: caam - one tasklet per job ring
  crypto: caam - consolidate memory barriers from job ring en/dequeue
  crypto: caam - only query h/w in job ring dequeue path
  ...

Pull input layer updates from Dmitry Torokhov:
 "First set of updates for the input subsystem.  You will get a new
  touchscreen driver (Melfas mms114), a new keypad driver for LPC32xx
  SoC, large update to Atmel mXT touchscreen driver, a lot of drivers
  acquired device tree support and a slew of other fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: add MELFAS mms114 touchscreen driver
  Input: add support for key scan interface of the LPC32xx SoC
  Input: omap4-keypad - add device tree support
  Input: hanwang - add support for Art Master II tablet
  Input: spear_keyboard - reconfigure operating frequency on suspend
  Input: spear_keyboard - fix clock handling during suspend/resume
  Input: ff-memless - fix a couple min_t() casts
  Input: synaptics - print firmware ID and board number at init
  Input: spear_keyboard - generalize keyboard frequency configuration
  Input: spear_keyboard - rename bit definitions to reflect register
  Input: spear_keyboard - use correct io accessors
  Input: spear-keyboard - fix disable device_init_wakeup in remove
  Input: wacom_i2c - fix compiler warning
  Input: imx_keypad - check error returned by clk_prepare_enable()
  Input: imx_keypad - adapt the new kpp clock name
  Input: imx_keypad - use clk_prepare_enable/clk_disable_unprepare()
  Input: ad7879 - add option to correct xy axis
  Input: synaptics_usb - Remove TrackPoint name trailing whitespace
  Revert "Input: atmel_mxt_ts - warn if sysfs could not be created"
  Input: MT - Include win8 support
  ...

Pull spi updates from Mark Brown:
 "Since Grant is even more specacularly busy than usual for the time
  being I've been collecting SPI patches for him for this release -
  probably things will revert back to Grant before the next release.

  There's nothing too exciting here, mostly it's simple driver specific
  stuff:

   - Add spi: to the modaliases of SPI devices to provide namespacing.
   - A driver for AD-FMCOMMS1-EBZ.
   - DT binding for Orion.
   - Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers.

   There may be a few more fixes I've missed, people keep sending me new
   things."

* tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi/orion: remove uneeded spi_info
  spi/bcm63xx: fix clock configuration selection
  spi/orion: add device tree binding
  spi/omap2: mark omap2_mcspi_master_setup as __devinit
  spi: omap2-mcspi: Fix the below warning
  spi: Add AD-FMCOMMS1-EBZ I2C-SPI bridge driver
  spi/imx: use gpio_is_valid to determine if a gpio is valid
  spi/imx: remove redundant config.speed_hz setting
  spi/gpio: start with CS non-active
  spi: tegra: use dmaengine based dma driver
  spi/pl022: cleanup pl022 header documentation
  spi/pl022: enable runtime PM
  spi/pl022: delete DB5500 support
  spi/pl022: disable port when unused
  spi: Add "spi:" prefix to modalias attribute of spi devices

Commit b9562545 ("bcma: complete workaround for BCMA43224 and
BCM4313") introduced the wrong masks for setting the chip control
registers - the "mask" parameter is inverse.

It should be the mask of bits *not* changed, which is admittedly a bit
non-intuitive.

The incorrect mask not only causes the driver to not work correctly on
the chips affected (eg the BCM43224 on the Macbook Air 4,2) but the
state persists over a soft reset, causing the next boot to not
necessarily see the device correctly.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Arend Van Spriel <arend@broadcom.com>
Cc: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Cc: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull char/misc patches from Greg Kroah-Hartman:
 "Here's the "big" pull request for 3.6-rc1 for the char/misc drivers.

  It's really just a few updates to the mei driver, plus 4 other tiny
  patches, nothing big at all.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: use module_pci_driver
  powerpc/BSR: cleanup the error path of bsr_init
  mei: mei_irq_thread_write_handler - line break fix
  mei: streamline the _mei_irq_thread_close/ioctol functions
  mei: introduce mei_data2slots wrapper
  mei: mei_wd_host_init: update the comment
  mei: remove write only wariable wd_due_counter
  mei: mei_device can be const for mei register access functions
  mei: revamp host buffer interface function
  mei: don't query HCSR for host buffer depth
  mei: group wd_interface_reg with watchdog variables within struct mei_device
  mei: mei_irq_thread_write_handler check for overflow
  mei: make mei_write_message more readable
  mei: check for error codes that mei_flow_ctrl_creds retuns
  misc: at25: Parse dt settings
  misc: hpilo: increase number of max supported channels
  mei: mei.txt: minor grammar fixes

Pull driver core changes from Greg Kroah-Hartman:
 "Here's the big driver core pull request for 3.6-rc1.

  Unlike 3.5, this kernel should be a lot tamer, with the printk changes
  now settled down.  All we have here is some extcon driver updates, w1
  driver updates, a few printk cleanups that weren't needed for 3.5, but
  are good to have now, and some other minor fixes/changes in the driver
  core.

  All of these have been in the linux-next releases for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  printk: Export struct log size and member offsets through vmcoreinfo
  Drivers: hv: Change the hex constant to a decimal constant
  driver core: don't trigger uevent after failure
  extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
  sysfs: fail dentry revalidation after namespace change fix
  sysfs: fail dentry revalidation after namespace change
  extcon: spelling of detach in function doc
  extcon: arizona: Stop microphone detection if we give up on it
  extcon: arizona: Update cable reporting calls and split headset
  PM / Runtime: Do not increment device usage counts before probing
  kmsg - do not flush partial lines when the console is busy
  kmsg - export "continuation record" flag to /dev/kmsg
  kmsg - avoid warning for CONFIG_PRINTK=n compilations
  kmsg - properly print over-long continuation lines
  driver-core: Use kobj_to_dev instead of re-implementing it
  driver-core: Move kobj_to_dev from genhd.h to device.h
  driver core: Move deferred devices to the end of dpm_list before probing
  driver core: move uevent call to driver_register
  driver core: fix shutdown races with probe/remove(v3)
  Extcon: Arizona: Add driver for Wolfson Arizona class devices
  ...

Pull staging tree patches from Greg Kroah-Hartman:
 "Here's the big staging tree merge for the 3.6-rc1 merge window.

  There are some patches in here outside of drivers/staging/, notibly
  the iio code (which is still stradeling the staging / not staging
  boundry), the pstore code, and the tracing code.  All of these have
  gotten acks from the various subsystem maintainers to be included in
  this tree.  The pstore and tracing patches are related, and are coming
  here as they replace one of the android staging drivers.

  Otherwise, the normal staging mess.  Lots of cleanups and a few new
  drivers (some iio drivers, and the large csr wireless driver
  abomination.)

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up trivial conflicts in drivers/staging/comedi/drivers/s626.h and
drivers/staging/gdm72xx/netlink_k.c

* tag 'staging-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1108 commits)
  staging: csr: delete a bunch of unused library functions
  staging: csr: remove csr_utf16.c
  staging: csr: remove csr_pmem.h
  staging: csr: remove CsrPmemAlloc
  staging: csr: remove CsrPmemFree()
  staging: csr: remove CsrMemAllocDma()
  staging: csr: remove CsrMemCalloc()
  staging: csr: remove CsrMemAlloc()
  staging: csr: remove CsrMemFree() and CsrMemFreeDma()
  staging: csr: remove csr_util.h
  staging: csr: remove CsrOffSetOf()
  stating: csr: remove unneeded #includes in csr_util.c
  staging: csr: make CsrUInt16ToHex static
  staging: csr: remove CsrMemCpy()
  staging: csr: remove CsrStrLen()
  staging: csr: remove CsrVsnprintf()
  staging: csr: remove CsrStrDup
  staging: csr: remove CsrStrChr()
  staging: csr: remove CsrStrNCmp
  staging: csr: remove CsrStrCmp
  ...

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB patch set for the 3.6-rc1 merge window.

  Lots of little changes in here, primarily for gadget controllers and
  drivers.  There's some scsi changes that I think also went in through
  the scsi tree, but they merge just fine.  All of these patches have
  been in the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up trivial conflicts in include/scsi/scsi_device.h (same libata
conflict that Jeff had already encountered)

* tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  usb: Add quirk detection based on interface information
  usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  USB: notify phy when root hub port connect change
  USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds
  USB: option: add ZTE MF821D
  USB: sierra: QMI mode MC7710 moved to qcserial
  USB: qcserial: adding Sierra Wireless devices
  USB: qcserial: support generic Qualcomm serial ports
  USB: qcserial: make probe more flexible
  USB: qcserial: centralize probe exit path
  USB: qcserial: consolidate usb_set_interface calls
  USB: ehci-s5p: Add support for device tree
  USB: ohci-exynos: Add support for device tree
  USB: ehci-omap: fix compile failure(v1)
  usb: host: tegra: pass correct pointer in ehci_setup()
  USB: ehci-fsl: Update ifdef check to work on 64-bit ppc
  USB: serial: keyspan: Removed unrequired parentheses.
  ...

Pull libata updates from Jeff Garzik:
 "Notable changes:

   - Updating libata to directly bind with ACPI / runtime power mgmt.
     This is a pre-req for SATA ZPODD (CD-ROM power management).

     Touches ACPI (exports++) and SCSI in minor ways.  Has been in
     linux-next for weeks.

     The rest of this should come via SCSI tree, as it involves a lot of
     updates to the 'sr' driver etc.

  Other, minor changes:

   - module_pci_driver() removes a lot of common boilerplate from each
     PCI driver

   - minor coding style, whitespace cleanups

   - pata_pcmcia bug fix, caught by Coccinelle

   - pata_imx, sata_dwc_460ex minor vendor updates

   - ahci_platform: use simple PM ops, and thereby add hibernation cb's

   - Add a few device-specific quirks"

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (23 commits)
  [libata] pata_cmd64x: whitespace cleanup
  libata-acpi: fix up for acpi_pm_device_sleep_state API
  sata_dwc_460ex: device tree may specify dma_channel
  ahci, trivial: fixed coding style issues related to braces
  ahci_platform: add hibernation callbacks
  libata-eh.c: local functions should not be exposed globally
  libata-transport.c: local functions should not be exposed globally
  sata_dwc_460ex: support hardreset
  ata: use module_pci_driver
  drivers/ata/pata_pcmcia.c: adjust suspicious bit operation
  pata_imx: Convert to clk_prepare_enable/clk_disable_unprepare
  ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2
  [libata] Prevent interface errors with Seagate FreeAgent GoFlex
  drivers/acpi/glue: revert accidental license-related 6b66d958 bits
  libata-acpi: add missing inlines in libata.h
  libata: tell scsi layer device supports runtime power off
  libata: detect Device Attention support
  libata-acpi: register/unregister device to/from power resource
  libata-acpi: add ata port runtime D3Cold support
  libata-acpi: set acpi state for SATA port
  ...

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

After merging the libata tree, today's [2012-07-01] linux-next build (x86_64
allmodconfig) failed like this:

drivers/ata/libata-acpi.c: In function 'ata_acpi_set_state':
drivers/ata/libata-acpi.c:872:5: error: too few arguments to function 'acpi_pm_device_sleep_state'
include/acpi/acpi_bus.h:418:5: note: declared here

Caused by commit 3bd46600 ("libata-acpi: add ata port runtime D3Cold
support") from the libata tree interacting with commit ee85f543
("ACPI/PM: specify lowest allowed state for device sleep state") from the
pci tree.

This patch adds ACPI_STATE_D3 as the new third parameter to
acpi_pm_device_sleep_state()
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Two bits were appended to the end of the bitfield
list in struct scsi_device.  Resolve that conflict
by including both bits.

Conflicts:
	include/scsi/scsi_device.h

Only channel 0 is currently support and the driver code is fixed on
channel 0. This patch lets device node specifying dma-channel in case
it is not 0. If no dma-channel property is specified, channel 0 is
used as default.
Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Fixed coding style issues related to braces found
by checkpatch.pl in drivers/ata/ahci.c
Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Use existing suspend, resume implementation for hibernation callbacks.
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The function ata_ering_clear_cb is only referenced in this file and
should be marked static to prevent it from being exposed globally.

This quiets the sparse warning:

warning: symbol 'ata_ering_clear_cb' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Functions not referenced outside of a source file should be marked
static to prevent it from being exposed globally.

This quiets the sparse warnings:

warning: symbol 'ata_is_port' was not declared. Should it be static?
warning: symbol 'ata_is_link' was not declared. Should it be static?
warning: symbol 'ata_is_ata_dev' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The hardreset operation is currently not supported. This causes
sometime the SATA driver does cause kernel crash because of
none-determined state.a This patch will fix the issue.
Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

This patch converts the drivers in drivers/ata/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Cc: Mark Lord <kernel@teksavvy.com>
Cc: Jeremy Higdon <jeremy@sgi.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

IO_DATA_PATH_WIDTH_8 is 0, so a bit-and with it is always false.  The
value IO_DATA_PATH_WIDTH covers the bits of the IO_DATA_PATH constants, so
first pick those bits and then make the test using !=.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

With the new i.mx clock framework, we need to use
clk_prepare_enable/clk_disable_unprepare.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Like e65cc194 (ahci: Enable SB600 64bit
DMA on MSI K9A2 Platinum) and 3c4aa91f
(ahci: Enable SB600 64bit DMA on Asus M3A), this patch enables 64bit DMA
for the AHCI SATA controller of another board that has the SB600
southbridge.

In this case though we're enabling 64bit DMA for another MSI motherboard,
the K9AGM2 or MS-7327. It is new enough that all of the BIOS releases
since the initial release (1.0 from 2007-02-09) work correctly with 64bit
DMA enabled.
Signed-off-by: Mark Nelson <mdnelson8@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

When using my Seagate FreeAgent GoFlex eSATAp external disk enclosure,
interface errors are always seen until 1.5Gbps is negotiated [1]. This
occurs using any disk in the enclosure, and when the disk is connected
directly with a generic passive eSATAp cable, we see stable 3Gbps
operation as expected.

Blacklist 3Gbps mode to avoid dataloss and the ~30s delay bus reset
and renegotiation incurs.
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Commit 6b66d958 should not have changed
EXPORT_SYMBOL_GPL to EXPORT_SYMBOL.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Adds inline for ata_acpi_unregister/ata_acpi_bind/ata_acpi_unbind
in drivers/ata/libata.h for !CONFIG_ATA_ACPI to fix below warnings.

warning: 'ata_acpi_unregister' defined but not used [-Wunused-function]
warning: 'ata_acpi_bind' defined but not used [-Wunused-function]
warning: 'ata_acpi_unbind' defined but not used [-Wunused-function]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Pull first round of SCSI updates from James Bottomley:
 "The most important feature of this patch set is the new async
  infrastructure that makes sure async_synchronize_full() synchronizes
  all domains and allows us to remove all the hacks (like having
  scsi_complete_async_scans() in the device base code) and means that
  the async infrastructure will "just work" in future.

  The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi,
  megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure
  work in sas and FC.

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
  [SCSI] Revert "[SCSI] fix async probe regression"
  [SCSI] cleanup usages of scsi_complete_async_scans
  [SCSI] queue async scan work to an async_schedule domain
  [SCSI] async: make async_synchronize_full() flush all work regardless of domain
  [SCSI] async: introduce 'async_domain' type
  [SCSI] bfa: Fix to set correct return error codes and misc cleanup.
  [SCSI] aacraid: Series 7 Async. (performance) mode support
  [SCSI] aha152x: Allow use on 64bit systems
  [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning
  [SCSI] bfa: squelch lockdep complaint with a spin_lock_init
  [SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP
  [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXP
  [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED
  [SCSI] ufs: reverse the ufshcd_is_device_present logic
  [SCSI] ufs: use module_pci_driver
  [SCSI] usb-storage: update usb devices for write cache quirk in quirk list.
  [SCSI] usb-storage: add support for write cache quirk
  [SCSI] set to WCE if usb cache quirk is present.
  [SCSI] virtio-scsi: hotplug support for virtio-scsi
  [SCSI] virtio-scsi: split scatterlist per target
  ...

Pull GFS2 updates from Steven Whitehouse.

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Eliminate 64-bit divides
  GFS2: Reduce file fragmentation
  GFS2: kernel panic with small gfs2 filesystems - 1 RG
  GFS2: Fixing double brelse'ing bh allocated in gfs2_meta_read when EIO occurs
  GFS2: Combine functions get_local_rgrp and gfs2_inplace_reserve
  GFS2: Add kobject release method
  GFS2: Size seq_file buffer more carefully
  GFS2: Use seq_vprintf for glocks debugfs file
  seq_file: Add seq_vprintf function and export it
  GFS2: Use lvbs for storing rgrp information with mount option
  GFS2: Cache last hash bucket for glock seq_files
  GFS2: Increase buffer size for glocks and glstats debugfs files
  GFS2: Fix error handling when reading an invalid block from the journal
  GFS2: Add "top dir" flag support
  GFS2: Fold quota data into the reservations struct
  GFS2: Extend the life of the reservations

Pull cgroup changes from Tejun Heo:
 "Nothing too interesting.  A minor bug fix and some cleanups."

* 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Update remount documentation
  cgroup: cgroup_rm_files() was calling simple_unlink() with the wrong inode
  cgroup: Remove populate() documentation
  cgroup: remove hierarchy_mutex

Pull workqueue changes from Tejun Heo:
 "There are three major changes.

   - WQ_HIGHPRI has been reimplemented so that high priority work items
     are served by worker threads with -20 nice value from dedicated
     highpri worker pools.

   - CPU hotplug support has been reimplemented such that idle workers
     are kept across CPU hotplug events.  This makes CPU hotplug cheaper
     (for PM) and makes the code simpler.

   - flush_kthread_work() has been reimplemented so that a work item can
     be freed while executing.  This removes an annoying behavior
     difference between kthread_worker and workqueue."

* 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix spurious CPU locality WARN from process_one_work()
  kthread_worker: reimplement flush_kthread_work() to allow freeing the work item being executed
  kthread_worker: reorganize to prepare for flush_kthread_work() reimplementation
  workqueue: simplify CPU hotplug code
  workqueue: remove CPU offline trustee
  workqueue: don't butcher idle workers on an offline CPU
  workqueue: reimplement CPU online rebinding to handle idle workers
  workqueue: drop @bind from create_worker()
  workqueue: use mutex for global_cwq manager exclusion
  workqueue: ROGUE workers are UNBOUND workers
  workqueue: drop CPU_DYING notifier operation
  workqueue: perform cpu down operations from low priority cpu_notifier()
  workqueue: reimplement WQ_HIGHPRI using a separate worker_pool
  workqueue: introduce NR_WORKER_POOLS and for_each_worker_pool()
  workqueue: separate out worker_pool flags
  workqueue: use @pool instead of @gcwq or @cpu where applicable
  workqueue: factor out worker_pool from global_cwq
  workqueue: don't use WQ_HIGHPRI for unbound workqueues

Pull misc udf, ext2, ext3, and isofs fixes from Jan Kara:
 "Assorted, mostly trivial, fixes for udf, ext2, ext3, and isofs.  I'm
  on vacation and scarcely checking email since we are expecting baby
  any day now but these fixes should be safe to go in and I don't want
  to delay them unnecessarily."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: avoid info leak on export
  isofs: avoid info leak on export
  udf: Improve table length check to avoid possible overflow
  ext3: Check return value of blkdev_issue_flush()
  jbd: Check return value of blkdev_issue_flush()
  udf: Do not decrement i_blocks when freeing indirect extent block
  udf: Fix memory leak when mounting
  ext2: cleanup the confused goto label
  UDF: Remove unnecessary variable "offset" from udf_fill_inode
  udf: stop using s_dirt
  ext3: force ro mount if ext3_setup_super() fails
  quota: fix checkpatch.pl warning by replacing <asm/uaccess.h> with <linux/uaccess.h>

Pull m68knommu arch update from Greg Ungerer:
 "Quite a varied set of changes this time.
   - A little more merge cleanup, this time the assembler entry code.
   - New sub-architecture support for the ColdFire 5251/5253 and 5441x
     CPU families.
   - Specific clk support code for the ColdFire 520x and 532x CPU
     familes.
   - Refactoring of the ColdFire GPIO support.
   - PCI bus support for some ColdFire CPUS that have PCI hardware (54xx
     family).  This showed up a few problems with ColdFire cache,
     allocating coherent memory and bi-directional DMA support.  Fixes
     for those too."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits)
  m68k: allow PCI bus to be enabled for ColdFire m54xx CPUs
  m68k: add PCI bus code support for the ColdFire M54xx SoC family
  m68k: add IO access definitions to support PCI on ColdFire platforms
  m68k: add PCI bus support definitions for the ColdFire M54xx SoC family
  m68k: common PCI support definitions and code
  m68k: add support for DMA_BIDIRECTIONAL in dma support functions
  m68k: fix ColdFire clear cache operation
  m68k: use simpler dma_alloc_coherent() for ColdFire CPUs
  m68knommu: platform support for 8390 based ethernet used on some boards
  m68knommu: Add clk definitions for m532x.
  m68knommu: Add clk definitions for m520x.
  m68knommu: Add rtc device for m5441x.
  m68knommu: add definitions for the third interrupt controller on devices that don't have a third interrupt controller.
  m68knommu: Add support for the Coldfire m5441x.
  m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1
  coldfire-qspi: Add support for the Coldfire 5251/5253.
  m68knommu: Add support for the Coldfire 5251/5253
  m68knommu: refactor Coldfire GPIO not to require GPIOLIB, eliminate mcf_gpio_chips.
  m68k: merge the MMU and non-MMU versions of the entry.S code
  m68k: use jbsr to call functions instead of bsrl
  ...

Pull slave-dmaengine update from Vinod Koul:
 "This time we have a new dmaengine driver from the tegra folks.  Also
  we have Guennadi's cleanup of sh drivers which incudes a library for
  sh drivers.  And the usual odd fixes in bunch of drivers and some nice
  cleanup of dw_dmac from Andy."

Fix up conflicts in drivers/mmc/host/sh_mmcif.c

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: Cleanup logging messages
  mmc: sh_mmcif: switch to the new DMA channel allocation and configuration
  dma: sh: provide a migration path for slave drivers to stop using .private
  dma: sh: use an integer slave ID to improve API compatibility
  dmaengine: shdma: prepare to stop using struct dma_chan::private
  sh: remove unused DMA device pointer from SIU platform data
  ASoC: siu: don't use DMA device for channel filtering
  dmaengine: shdma: (cosmetic) simplify a static function
  dmaengine: at_hdmac: add a few const qualifiers
  dw_dmac: use 'u32' for LLI structure members, not dma_addr_t
  dw_dmac: mark dwc_dump_lli inline
  dma: mxs-dma: Export missing symbols from mxs-dma.c
  dma: shdma: convert to the shdma base library
  ASoC: fsi: prepare for conversion to the shdma base library
  usb: renesas_usbhs: prepare for conversion to the shdma base library
  ASoC: siu: prepare for conversion to the shdma base library
  serial: sh-sci: prepare for conversion to the shdma base library
  mmc: sh_mobile_sdhi: prepare for conversion to the shdma base library
  mmc: sh_mmcif: remove unneeded struct sh_mmcif_dma, prepare to shdma conversion
  dma: shdma: prepare for conversion to the shdma base library
  ...

Pull common clk framework changes from Michael Turquette:
 "This includes a small number of core framework improvments, platform
  ports and new DT bindings."

Fix up trivial conflicts in drivers/clk/Makefile

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits)
  clk: fix compile for OF && !COMMON_CLK
  clk: fix clk_get on of_clk_get_by_name return check
  clk: mxs: clk_register_clkdev mx28 usb clocks
  clk: add highbank clock support
  dt: add clock binding doc to primecell bindings
  clk: add DT fixed-clock binding support
  clk: add DT clock binding support
  ARM: integrator: convert to common clock
  clk: add versatile ICST307 driver
  ARM: integrator: put symbolic bus names on devices
  ARM: u300: convert to common clock
  clk: cache parent clocks only for muxes
  clk: wm831x: Add initial WM831x clock driver
  clk: Constify struct clk_init_data
  clk: Add CLK_IS_BASIC flag to identify basic clocks
  clk: Add support for rate table based dividers
  clk: Add support for power of two type dividers
  clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3
  clk: mxs: add clkdev lookup for pwm
  clk: mxs: Fix the GPMI clock name
  ...

Pull IOMMU updates from Joerg Roedel:
 "The most important part of these updates is the IOMMU groups code
  enhancement written by Alex Williamson.  It abstracts the problem that
  a given hardware IOMMU can't isolate any given device from any other
  device (e.g.  32 bit PCI devices can't usually be isolated).  Devices
  that can't be isolated are grouped together.  This code is required
  for the upcoming VFIO framework.

  Another IOMMU-API change written by me is the introduction of domain
  attributes.  This makes it easier to handle GART-like IOMMUs with the
  IOMMU-API because now the start-address and the size of the domain
  address space can be queried.

  Besides that there are a few cleanups and fixes for the NVidia Tegra
  IOMMU drivers and the reworked init-code for the AMD IOMMU.  The
  latter is from my patch-set to support interrupt remapping.  The rest
  of this patch-set requires x86 changes which are not mergabe yet.  So
  full support for interrupt remapping with AMD IOMMUs will come in a
  future merge window."

* tag 'iommu-updates-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (33 commits)
  iommu/amd: Fix hotplug with iommu=pt
  iommu/amd: Add missing spin_lock initialization
  iommu/amd: Convert iommu initialization to state machine
  iommu/amd: Introduce amd_iommu_init_dma routine
  iommu/amd: Move unmap_flush message to amd_iommu_init_dma_ops()
  iommu/amd: Split enable_iommus() routine
  iommu/amd: Introduce early_amd_iommu_init routine
  iommu/amd: Move informational prinks out of iommu_enable
  iommu/amd: Split out PCI related parts of IOMMU initialization
  iommu/amd: Use acpi_get_table instead of acpi_table_parse
  iommu/amd: Fix sparse warnings
  iommu/tegra: Don't call alloc_pdir with as->lock
  iommu/tegra: smmu: Fix unsleepable memory allocation at alloc_pdir()
  iommu/tegra: smmu: Remove unnecessary sanity check at alloc_pdir()
  iommu/exynos: Implement DOMAIN_ATTR_GEOMETRY attribute
  iommu/tegra: Implement DOMAIN_ATTR_GEOMETRY attribute
  iommu/msm: Implement DOMAIN_ATTR_GEOMETRY attribute
  iommu/omap: Implement DOMAIN_ATTR_GEOMETRY attribute
  iommu/vt-d: Implement DOMAIN_ATTR_GEOMETRY attribute
  iommu/amd: Implement DOMAIN_ATTR_GEOMETRY attribute
  ...

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug:
    - Add MMCONFIG support for hot-added host bridges (Jiang Liu)
  Device hotplug:
    - Move fixups from __init to __devinit (Sebastian Andrzej Siewior)
    - Call FINAL fixups for hot-added devices, too (Myron Stowe)
    - Factor out generic code for P2P bridge hot-add (Yinghai Lu)
    - Remove all functions in a slot, not just those with _EJx (Amos
      Kong)
  Dynamic resource management:
    - Track bus number allocation (struct resource tree per domain)
      (Yinghai Lu)
    - Make P2P bridge 1K I/O windows work with resource reassignment
      (Bjorn Helgaas, Yinghai Lu)
    - Disable decoding while updating 64-bit BARs (Bjorn Helgaas)
  Power management:
    - Add PCIe runtime D3cold support (Huang Ying)
  Virtualization:
    - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex
      Williamson)
    - Add quirks for devices with broken INTx masking (Jan Kiszka)
  Miscellaneous:
    - Fix some PCI Express capability version issues (Myron Stowe)
    - Factor out some arch code with a weak, generic, pcibios_setup()
      (Myron Stowe)"

* tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (122 commits)
  PCI: hotplug: ensure a consistent return value in error case
  PCI: fix undefined reference to 'pci_fixup_final_inited'
  PCI: build resource code for M68K architecture
  PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width()
  PCI: reorder __pci_assign_resource() (no change)
  PCI: fix truncation of resource size to 32 bits
  PCI: acpiphp: merge acpiphp_debug and debug
  PCI: acpiphp: remove unused res_lock
  sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases()
  PCI: call final fixups hot-added devices
  PCI: move final fixups from __init to __devinit
  x86/PCI: move final fixups from __init to __devinit
  MIPS/PCI: move final fixups from __init to __devinit
  PCI: support sizing P2P bridge I/O windows with 1K granularity
  PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
  PCI: disable MEM decoding while updating 64-bit MEM BARs
  PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too
  PCI: never discard enable/suspend/resume_early/resume fixups
  PCI: release temporary reference in __nv_msi_ht_cap_quirk()
  PCI: restructure 'pci_do_fixups()'
  ...

Pull devicetree updates from Rob Herring:
 "A small set of changes for devicetree:
   - Couple of Documentation fixes
   - Addition of new helper function of_node_full_name
   - Improve of_parse_phandle_with_args return values
   - Some NULL related sparse fixes"

Grant's busy packing.

* tag 'dt-for-3.6' of git://sources.calxeda.com/kernel/linux:
  of: mtd: nuke useless const qualifier
  devicetree: add helper inline for retrieving a node's full name
  of: return -ENOENT when no property
  usage-model.txt: fix typo machine_init->init_machine
  of: Fix null pointer related warnings in base.c file
  LED: Fix missing semicolon in OF documentation
  of: fix a few typos in the binding documentation

Pull pin control changes from Linus Walleij:
 "These are the accumulated pin control patches for v3.6:
   - Various cleanups to the U300 driver
   - Refactor the pin control core to automatically remove any GPIO
     ranges when the drivers are removed, instead of having the drivers
     do this explicitly.
   - Add a function for registering a batch of GPIO ranges.
   - Fix a number of incorrect but non-regressive error checks.
   - Incremental improvements to the COH901, i.MX and Nomadik drivers
   - Add a one-register-per-pin entirely Device Tree-based pin control
     driver from Tony Lindgren."

* tag 'pinctrl-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: Add one-register-per-pin type device tree based pinctrl driver
  pinctrl/nomadik: add spi2_oc1_2 pin group
  pinctrl/nomadik: kerneldoc fix
  pinctrl/nomadik: use devm_* allocators for gpio probe
  pinctrl/nomadik: add pin group to mco function
  pinctrl/nomadik: add hsit_a_2 pin group
  pinctrl/nomadik: add pin group smcs1 and smps0
  pinctrl/nomadik: fix hsir_a_1_pins pin list
  pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL is set
  pinctrl/coh901: use clk_prepare_[en|dis]able()
  pinctrl/pinctrl-tegra: remove IS_ERR checking of pmx->pctl
  pinctrl/pinctrl-spear: remove IS_ERR checking of pmx->pctl
  pinctrl/u300: drop unused variable
  pinctrl: select the proper symbol
  pinctrl: add pinctrl_add_gpio_ranges function
  pinctrl: remove pinctrl_remove_gpio_range
  pinctrl/pinctrl-core: cleanup pinctrl_register
  pinctrl/u300: delete pointless debug print
  pinctrl/pinctrl-u300: remove devm_kfree at driver unload