1. 21 Jul, 2017 40 commits
    • Lauro Ramos Venancio's avatar
      sched/topology: Optimize build_group_mask() · 3e165b23
      Lauro Ramos Venancio authored
      commit f32d782e upstream.
      
      The group mask is always used in intersection with the group CPUs. So,
      when building the group mask, we don't have to care about CPUs that are
      not part of the group.
      Signed-off-by: default avatarLauro Ramos Venancio <lvenanci@redhat.com>
      Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: lwang@redhat.com
      Cc: riel@redhat.com
      Link: http://lkml.kernel.org/r/1492717903-5195-2-git-send-email-lvenanci@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3e165b23
    • Peter Zijlstra's avatar
      sched/topology: Fix building of overlapping sched-groups · 7c3f08ea
      Peter Zijlstra authored
      commit 0372dd27 upstream.
      
      When building the overlapping groups, we very obviously should start
      with the previous domain of _this_ @cpu, not CPU-0.
      
      This can be readily demonstrated with a topology like:
      
        node   0   1   2   3
          0:  10  20  30  20
          1:  20  10  20  30
          2:  30  20  10  20
          3:  20  30  20  10
      
      Where (for example) CPU1 ends up generating the following nonsensical groups:
      
        [] CPU1 attaching sched-domain:
        []  domain 0: span 0-2 level NUMA
        []   groups: 1 2 0
        []   domain 1: span 0-3 level NUMA
        []    groups: 1-3 (cpu_capacity = 3072) 0-1,3 (cpu_capacity = 3072)
      
      Where the fact that domain 1 doesn't include a group with span 0-2 is
      the obvious fail.
      
      With patch this looks like:
      
        [] CPU1 attaching sched-domain:
        []  domain 0: span 0-2 level NUMA
        []   groups: 1 0 2
        []   domain 1: span 0-3 level NUMA
        []    groups: 0-2 (cpu_capacity = 3072) 0,2-3 (cpu_capacity = 3072)
      Debugged-by: default avatarLauro Ramos Venancio <lvenanci@redhat.com>
      Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-kernel@vger.kernel.org
      Fixes: e3589f6c ("sched: Allow for overlapping sched_domain spans")
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7c3f08ea
    • Peter Zijlstra's avatar
      sched/fair, cpumask: Export for_each_cpu_wrap() · 542ebc96
      Peter Zijlstra authored
      commit c6508a39 upstream.
      
      commit c743f0a5 upstream.
      
      More users for for_each_cpu_wrap() have appeared. Promote the construct
      to generic cpumask interface.
      
      The implementation is slightly modified to reduce arguments.
      Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
      Cc: Lauro Ramos Venancio <lvenanci@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: lwang@redhat.com
      Link: http://lkml.kernel.org/r/20170414122005.o35me2h5nowqkxbv@hirez.programming.kicks-ass.netSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarMel Gorman <mgorman@techsingularity.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      542ebc96
    • Greg Kroah-Hartman's avatar
      Revert "sched/core: Optimize SCHED_SMT" · a0a93e3e
      Greg Kroah-Hartman authored
      This reverts commit 1b568f0a.
      
      For the 4.9 kernel tree, this patch causes scheduler regressions.  It is
      fixed in newer kernels with a large number of individual patches, the
      sum of which is too big for the stable kernel tree.
      
      Ingo recommended just reverting the single patch for this tree, as it's
      much simpler.
      Reported-by: default avatarBen Guthro <ben@guthro.net>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a0a93e3e
    • Horia Geantă's avatar
      crypto: caam - fix signals handling · 80495c70
      Horia Geantă authored
      commit 7459e1d2 upstream.
      
      Driver does not properly handle the case when signals interrupt
      wait_for_completion_interruptible():
      -it does not check for return value
      -completion structure is allocated on stack; in case a signal interrupts
      the sleep, it will go out of scope, causing the worker thread
      (caam_jr_dequeue) to fail when it accesses it
      
      wait_for_completion_interruptible() is replaced with uninterruptable
      wait_for_completion().
      We choose to block all signals while waiting for I/O (device executing
      the split key generation job descriptor) since the alternative - in
      order to have a deterministic device state - would be to flush the job
      ring (aborting *all* in-progress jobs).
      
      Fixes: 045e3678 ("crypto: caam - ahash hmac support")
      Fixes: 4c1ec1f9 ("crypto: caam - refactor key_gen, sg")
      Signed-off-by: default avatarHoria Geantă <horia.geanta@nxp.com>
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      80495c70
    • David Gstir's avatar
      crypto: caam - properly set IV after {en,de}crypt · 48a9dff2
      David Gstir authored
      commit 854b06f7 upstream.
      
      Certain cipher modes like CTS expect the IV (req->info) of
      ablkcipher_request (or equivalently req->iv of skcipher_request) to
      contain the last ciphertext block when the {en,de}crypt operation is done.
      This is currently not the case for the CAAM driver which in turn breaks
      e.g. cts(cbc(aes)) when the CAAM driver is enabled.
      
      This patch fixes the CAAM driver to properly set the IV after the
      {en,de}crypt operation of ablkcipher finishes.
      
      This issue was revealed by the changes in the SW CTS mode in commit
      0605c41c ("crypto: cts - Convert to skcipher")
      Signed-off-by: default avatarDavid Gstir <david@sigma-star.at>
      Reviewed-by: default avatarHoria Geantă <horia.geanta@nxp.com>
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      48a9dff2
    • Herbert Xu's avatar
      crypto: sha1-ssse3 - Disable avx2 · db923288
      Herbert Xu authored
      commit b82ce244 upstream.
      
      It has been reported that sha1-avx2 can cause page faults by reading
      beyond the end of the input.  This patch disables it until it can be
      fixed.
      
      Fixes: 7c1da8d0 ("crypto: sha - SHA1 transform x86_64 AVX2")
      Reported-by: default avatarJan Stancek <jstancek@redhat.com>
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      db923288
    • Gilad Ben-Yossef's avatar
      crypto: atmel - only treat EBUSY as transient if backlog · 81cc2ef2
      Gilad Ben-Yossef authored
      commit 1606043f upstream.
      
      The Atmel SHA driver was treating -EBUSY as indication of queueing
      to backlog without checking that backlog is enabled for the request.
      
      Fix it by checking request flags.
      Signed-off-by: default avatarGilad Ben-Yossef <gilad@benyossef.com>
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      81cc2ef2
    • Martin Hicks's avatar
      crypto: talitos - Extend max key length for SHA384/512-HMAC and AEAD · 2ff2cc76
      Martin Hicks authored
      commit 03d2c511 upstream.
      
      An updated patch that also handles the additional key length requirements
      for the AEAD algorithms.
      
      The max keysize is not 96.  For SHA384/512 it's 128, and for the AEAD
      algorithms it's longer still.  Extend the max keysize for the
      AEAD size for AES256 + HMAC(SHA512).
      
      Fixes: 357fb605 ("crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms")
      Signed-off-by: default avatarMartin Hicks <mort@bork.org>
      Acked-by: default avatarHoria Geantă <horia.geanta@nxp.com>
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2ff2cc76
    • Helge Deller's avatar
      mm: fix overflow check in expand_upwards() · 38dfd2e3
      Helge Deller authored
      commit 37511fb5 upstream.
      
      Jörn Engel noticed that the expand_upwards() function might not return
      -ENOMEM in case the requested address is (unsigned long)-PAGE_SIZE and
      if the architecture didn't defined TASK_SIZE as multiple of PAGE_SIZE.
      
      Affected architectures are arm, frv, m68k, blackfin, h8300 and xtensa
      which all define TASK_SIZE as 0xffffffff, but since none of those have
      an upwards-growing stack we currently have no actual issue.
      
      Nevertheless let's fix this just in case any of the architectures with
      an upward-growing stack (currently parisc, metag and partly ia64) define
      TASK_SIZE similar.
      
      Link: http://lkml.kernel.org/r/20170702192452.GA11868@p100.box
      Fixes: bd726c90 ("Allow stack to grow up to address space limit")
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      Reported-by: default avatarJörn Engel <joern@purestorage.com>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      38dfd2e3
    • Andy Lutomirski's avatar
      selftests/capabilities: Fix the test_execve test · 1e6f1af8
      Andy Lutomirski authored
      commit 796a3bae upstream.
      
      test_execve does rather odd mount manipulations to safely create
      temporary setuid and setgid executables that aren't visible to the
      rest of the system.  Those executables end up in the test's cwd, but
      that cwd is MNT_DETACHed.
      
      The core namespace code considers MNT_DETACHed trees to belong to no
      mount namespace at all and, in general, MNT_DETACHed trees are only
      barely function.  This interacted with commit 380cf5ba ("fs:
      Treat foreign mounts as nosuid") to cause all MNT_DETACHed trees to
      act as though they're nosuid, breaking the test.
      
      Fix it by just not detaching the tree.  It's still in a private
      mount namespace and is therefore still invisible to the rest of the
      system (except via /proc, and the same nosuid logic will protect all
      other programs on the system from believing in test_execve's setuid
      bits).
      
      While we're at it, fix some blatant whitespace problems.
      Reported-by: default avatarNaresh Kamboju <naresh.kamboju@linaro.org>
      Fixes: 380cf5ba ("fs: Treat foreign mounts as nosuid")
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Shuah Khan <shuahkh@osg.samsung.com>
      Cc: Greg KH <greg@kroah.com>
      Cc: linux-kselftest@vger.kernel.org
      Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
      Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarShuah Khan <shuahkh@osg.samsung.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1e6f1af8
    • Eric W. Biederman's avatar
      mnt: Make propagate_umount less slow for overlapping mount propagation trees · 54fcb230
      Eric W. Biederman authored
      commit 296990de upstream.
      
      Andrei Vagin pointed out that time to executue propagate_umount can go
      non-linear (and take a ludicrious amount of time) when the mount
      propogation trees of the mounts to be unmunted by a lazy unmount
      overlap.
      
      Make the walk of the mount propagation trees nearly linear by
      remembering which mounts have already been visited, allowing
      subsequent walks to detect when walking a mount propgation tree or a
      subtree of a mount propgation tree would be duplicate work and to skip
      them entirely.
      
      Walk the list of mounts whose propgatation trees need to be traversed
      from the mount highest in the mount tree to mounts lower in the mount
      tree so that odds are higher that the code will walk the largest trees
      first, allowing later tree walks to be skipped entirely.
      
      Add cleanup_umount_visitation to remover the code's memory of which
      mounts have been visited.
      
      Add the functions last_slave and skip_propagation_subtree to allow
      skipping appropriate parts of the mount propagation tree without
      needing to change the logic of the rest of the code.
      
      A script to generate overlapping mount propagation trees:
      
      $ cat runs.h
      set -e
      mount -t tmpfs zdtm /mnt
      mkdir -p /mnt/1 /mnt/2
      mount -t tmpfs zdtm /mnt/1
      mount --make-shared /mnt/1
      mkdir /mnt/1/1
      
      iteration=10
      if [ -n "$1" ] ; then
      	iteration=$1
      fi
      
      for i in $(seq $iteration); do
      	mount --bind /mnt/1/1 /mnt/1/1
      done
      
      mount --rbind /mnt/1 /mnt/2
      
      TIMEFORMAT='%Rs'
      nr=$(( ( 2 ** ( $iteration + 1 ) ) + 1 ))
      echo -n "umount -l /mnt/1 -> $nr        "
      time umount -l /mnt/1
      
      nr=$(cat /proc/self/mountinfo | grep zdtm | wc -l )
      time umount -l /mnt/2
      
      $ for i in $(seq 9 19); do echo $i; unshare -Urm bash ./run.sh $i; done
      
      Here are the performance numbers with and without the patch:
      
           mhash |  8192   |  8192  | 1048576 | 1048576
          mounts | before  | after  |  before | after
          ------------------------------------------------
            1025 |  0.040s | 0.016s |  0.038s | 0.019s
            2049 |  0.094s | 0.017s |  0.080s | 0.018s
            4097 |  0.243s | 0.019s |  0.206s | 0.023s
            8193 |  1.202s | 0.028s |  1.562s | 0.032s
           16385 |  9.635s | 0.036s |  9.952s | 0.041s
           32769 | 60.928s | 0.063s | 44.321s | 0.064s
           65537 |         | 0.097s |         | 0.097s
          131073 |         | 0.233s |         | 0.176s
          262145 |         | 0.653s |         | 0.344s
          524289 |         | 2.305s |         | 0.735s
         1048577 |         | 7.107s |         | 2.603s
      
      Andrei Vagin reports fixing the performance problem is part of the
      work to fix CVE-2016-6213.
      
      Fixes: a05964f3 ("[PATCH] shared mounts handling: umount")
      Reported-by: default avatarAndrei Vagin <avagin@openvz.org>
      Reviewed-by: default avatarAndrei Vagin <avagin@virtuozzo.com>
      Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      54fcb230
    • Eric W. Biederman's avatar
      mnt: In propgate_umount handle visiting mounts in any order · bb4fbf09
      Eric W. Biederman authored
      commit 99b19d16 upstream.
      
      While investigating some poor umount performance I realized that in
      the case of overlapping mount trees where some of the mounts are locked
      the code has been failing to unmount all of the mounts it should
      have been unmounting.
      
      This failure to unmount all of the necessary
      mounts can be reproduced with:
      
      $ cat locked_mounts_test.sh
      
      mount -t tmpfs test-base /mnt
      mount --make-shared /mnt
      mkdir -p /mnt/b
      
      mount -t tmpfs test1 /mnt/b
      mount --make-shared /mnt/b
      mkdir -p /mnt/b/10
      
      mount -t tmpfs test2 /mnt/b/10
      mount --make-shared /mnt/b/10
      mkdir -p /mnt/b/10/20
      
      mount --rbind /mnt/b /mnt/b/10/20
      
      unshare -Urm --propagation unchaged /bin/sh -c 'sleep 5; if [ $(grep test /proc/self/mountinfo | wc -l) -eq 1 ] ; then echo SUCCESS ; else echo FAILURE ; fi'
      sleep 1
      umount -l /mnt/b
      wait %%
      
      $ unshare -Urm ./locked_mounts_test.sh
      
      This failure is corrected by removing the prepass that marks mounts
      that may be umounted.
      
      A first pass is added that umounts mounts if possible and if not sets
      mount mark if they could be unmounted if they weren't locked and adds
      them to a list to umount possibilities.  This first pass reconsiders
      the mounts parent if it is on the list of umount possibilities, ensuring
      that information of umoutability will pass from child to mount parent.
      
      A second pass then walks through all mounts that are umounted and processes
      their children unmounting them or marking them for reparenting.
      
      A last pass cleans up the state on the mounts that could not be umounted
      and if applicable reparents them to their first parent that remained
      mounted.
      
      While a bit longer than the old code this code is much more robust
      as it allows information to flow up from the leaves and down
      from the trunk making the order in which mounts are encountered
      in the umount propgation tree irrelevant.
      
      Fixes: 0c56fe31 ("mnt: Don't propagate unmounts to locked mounts")
      Reviewed-by: default avatarAndrei Vagin <avagin@virtuozzo.com>
      Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bb4fbf09
    • Eric W. Biederman's avatar
      mnt: In umount propagation reparent in a separate pass · e260db75
      Eric W. Biederman authored
      commit 570487d3 upstream.
      
      It was observed that in some pathlogical cases that the current code
      does not unmount everything it should.  After investigation it
      was determined that the issue is that mnt_change_mntpoint can
      can change which mounts are available to be unmounted during mount
      propagation which is wrong.
      
      The trivial reproducer is:
      $ cat ./pathological.sh
      
      mount -t tmpfs test-base /mnt
      cd /mnt
      mkdir 1 2 1/1
      mount --bind 1 1
      mount --make-shared 1
      mount --bind 1 2
      mount --bind 1/1 1/1
      mount --bind 1/1 1/1
      echo
      grep test-base /proc/self/mountinfo
      umount 1/1
      echo
      grep test-base /proc/self/mountinfo
      
      $ unshare -Urm ./pathological.sh
      
      The expected output looks like:
      46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
      47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      
      46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
      47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      
      The output without the fix looks like:
      46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
      47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      
      46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
      47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      52 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
      
      That last mount in the output was in the propgation tree to be unmounted but
      was missed because the mnt_change_mountpoint changed it's parent before the walk
      through the mount propagation tree observed it.
      
      Fixes: 1064f874 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.")
      Acked-by: default avatarAndrei Vagin <avagin@virtuozzo.com>
      Reviewed-by: default avatarRam Pai <linuxram@us.ibm.com>
      Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e260db75
    • Johan Hovold's avatar
      nvmem: core: fix leaks on registration errors · 7d976da0
      Johan Hovold authored
      commit 3360acdf upstream.
      
      Make sure to deregister and release the nvmem device and underlying
      memory on registration errors.
      
      Note that the private data must be freed using put_device() once the
      struct device has been initialised.
      
      Also note that there's a related reference leak in the deregistration
      function as reported by Mika Westerberg which is being fixed separately.
      
      Fixes: b6c217ab ("nvmem: Add backwards compatibility support for older EEPROM drivers.")
      Fixes: eace75cf ("nvmem: Add a simple NVMEM framework for nvmem providers")
      Cc: Andrew Lunn <andrew@lunn.ch>
      Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
      Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Acked-by: default avatarAndrey Smirnov <andrew.smirnov@gmail.com>
      Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7d976da0
    • Paul E. McKenney's avatar
      rcu: Add memory barriers for NOCB leader wakeup · ac5e9e80
      Paul E. McKenney authored
      commit 6b5fc3a1 upstream.
      
      Wait/wakeup operations do not guarantee ordering on their own.  Instead,
      either locking or memory barriers are required.  This commit therefore
      adds memory barriers to wake_nocb_leader() and nocb_leader_wait().
      Signed-off-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
      Tested-by: default avatarKrister Johansen <kjlx@templeofstupid.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ac5e9e80
    • Adam Borowski's avatar
      vt: fix unchecked __put_user() in tioclinux ioctls · 63c634cf
      Adam Borowski authored
      commit 6987dc8a upstream.
      
      Only read access is checked before this call.
      
      Actually, at the moment this is not an issue, as every in-tree arch does
      the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU
      to tell them apart, but this wasn't the case in the past and may happen
      again on some odd arch in the future.
      
      If anyone cares about 3.7 and earlier, this is a security hole (untested)
      on real 80386 CPUs.
      Signed-off-by: default avatarAdam Borowski <kilobyte@angband.pl>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      63c634cf
    • Marc Zyngier's avatar
      ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers · 445a945a
      Marc Zyngier authored
      commit 88cda007 upstream.
      
      Contrary to popular belief, PPIs connected to a GICv3 to not have
      an affinity field similar to that of GICv2. That is consistent
      with the fact that GICv3 is designed to accomodate thousands of
      CPUs, and fitting them as a bitmap in a byte is... difficult.
      
      Fixes: adbc3695 ("arm64: dts: add the Marvell Armada 3700 family and a development board")
      Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      445a945a
    • Kees Cook's avatar
      exec: Limit arg stack to at most 75% of _STK_LIM · f31c4f65
      Kees Cook authored
      commit da029c11 upstream.
      
      To avoid pathological stack usage or the need to special-case setuid
      execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB).
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f31c4f65
    • Kees Cook's avatar
      s390: reduce ELF_ET_DYN_BASE · fbc877cd
      Kees Cook authored
      commit a73dc537 upstream.
      
      Now that explicitly executed loaders are loaded in the mmap region, we
      have more freedom to decide where we position PIE binaries in the
      address space to avoid possible collisions with mmap or stack regions.
      
      For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
      address space for 32-bit pointers.  On 32-bit use 4MB, which is the
      traditional x86 minimum load location, likely to avoid historically
      requiring a 4MB page table entry when only a portion of the first 4MB
      would be used (since the NULL address is avoided).  For s390 the
      position could be 0x10000, but that is needlessly close to the NULL
      address.
      
      Link: http://lkml.kernel.org/r/1498154792-49952-5-git-send-email-keescook@chromium.orgSigned-off-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Pratyush Anand <panand@redhat.com>
      Cc: Ingo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fbc877cd
    • Kees Cook's avatar
      powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB · 90fb0f7a
      Kees Cook authored
      commit 47ebb09d upstream.
      
      Now that explicitly executed loaders are loaded in the mmap region, we
      have more freedom to decide where we position PIE binaries in the
      address space to avoid possible collisions with mmap or stack regions.
      
      For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
      address space for 32-bit pointers.  On 32-bit use 4MB, which is the
      traditional x86 minimum load location, likely to avoid historically
      requiring a 4MB page table entry when only a portion of the first 4MB
      would be used (since the NULL address is avoided).
      
      Link: http://lkml.kernel.org/r/1498154792-49952-4-git-send-email-keescook@chromium.orgSigned-off-by: default avatarKees Cook <keescook@chromium.org>
      Tested-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Acked-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Pratyush Anand <panand@redhat.com>
      Cc: Ingo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      90fb0f7a
    • Kees Cook's avatar
      arm64: move ELF_ET_DYN_BASE to 4GB / 4MB · 70779e0e
      Kees Cook authored
      commit 02445990 upstream.
      
      Now that explicitly executed loaders are loaded in the mmap region, we
      have more freedom to decide where we position PIE binaries in the
      address space to avoid possible collisions with mmap or stack regions.
      
      For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
      address space for 32-bit pointers.  On 32-bit use 4MB, to match ARM.
      This could be 0x8000, the standard ET_EXEC load address, but that is
      needlessly close to the NULL address, and anyone running arm compat PIE
      will have an MMU, so the tight mapping is not needed.
      
      Link: http://lkml.kernel.org/r/1498251600-132458-4-git-send-email-keescook@chromium.orgSigned-off-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Mark Rutland <mark.rutland@arm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      70779e0e
    • Kees Cook's avatar
      arm: move ELF_ET_DYN_BASE to 4MB · abb79a56
      Kees Cook authored
      commit 6a9af90a upstream.
      
      Now that explicitly executed loaders are loaded in the mmap region, we
      have more freedom to decide where we position PIE binaries in the
      address space to avoid possible collisions with mmap or stack regions.
      
      4MB is chosen here mainly to have parity with x86, where this is the
      traditional minimum load location, likely to avoid historically
      requiring a 4MB page table entry when only a portion of the first 4MB
      would be used (since the NULL address is avoided).
      
      For ARM the position could be 0x8000, the standard ET_EXEC load address,
      but that is needlessly close to the NULL address, and anyone running PIE
      on 32-bit ARM will have an MMU, so the tight mapping is not needed.
      
      Link: http://lkml.kernel.org/r/1498154792-49952-2-git-send-email-keescook@chromium.orgSigned-off-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Pratyush Anand <panand@redhat.com>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Daniel Micay <danielmicay@gmail.com>
      Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
      Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
      Cc: Qualys Security Advisory <qsa@qualys.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      abb79a56
    • Kees Cook's avatar
      binfmt_elf: use ELF_ET_DYN_BASE only for PIE · 63c2f8f8
      Kees Cook authored
      commit eab09532 upstream.
      
      The ELF_ET_DYN_BASE position was originally intended to keep loaders
      away from ET_EXEC binaries.  (For example, running "/lib/ld-linux.so.2
      /bin/cat" might cause the subsequent load of /bin/cat into where the
      loader had been loaded.)
      
      With the advent of PIE (ET_DYN binaries with an INTERP Program Header),
      ELF_ET_DYN_BASE continued to be used since the kernel was only looking
      at ET_DYN.  However, since ELF_ET_DYN_BASE is traditionally set at the
      top 1/3rd of the TASK_SIZE, a substantial portion of the address space
      is unused.
      
      For 32-bit tasks when RLIMIT_STACK is set to RLIM_INFINITY, programs are
      loaded above the mmap region.  This means they can be made to collide
      (CVE-2017-1000370) or nearly collide (CVE-2017-1000371) with
      pathological stack regions.
      
      Lowering ELF_ET_DYN_BASE solves both by moving programs below the mmap
      region in all cases, and will now additionally avoid programs falling
      back to the mmap region by enforcing MAP_FIXED for program loads (i.e.
      if it would have collided with the stack, now it will fail to load
      instead of falling back to the mmap region).
      
      To allow for a lower ELF_ET_DYN_BASE, loaders (ET_DYN without INTERP)
      are loaded into the mmap region, leaving space available for either an
      ET_EXEC binary with a fixed location or PIE being loaded into mmap by
      the loader.  Only PIE programs are loaded offset from ELF_ET_DYN_BASE,
      which means architectures can now safely lower their values without risk
      of loaders colliding with their subsequently loaded programs.
      
      For 64-bit, ELF_ET_DYN_BASE is best set to 4GB to allow runtimes to use
      the entire 32-bit address space for 32-bit pointers.
      
      Thanks to PaX Team, Daniel Micay, and Rik van Riel for inspiration and
      suggestions on how to implement this solution.
      
      Fixes: d1fd836d ("mm: split ET_DYN ASLR from mmap ASLR")
      Link: http://lkml.kernel.org/r/20170621173201.GA114489@beastSigned-off-by: default avatarKees Cook <keescook@chromium.org>
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Cc: Daniel Micay <danielmicay@gmail.com>
      Cc: Qualys Security Advisory <qsa@qualys.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
      Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Pratyush Anand <panand@redhat.com>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Will Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      63c2f8f8
    • Cyril Bur's avatar
      checkpatch: silence perl 5.26.0 unescaped left brace warnings · 93eae954
      Cyril Bur authored
      commit 8d81ae05 upstream.
      
      As of perl 5, version 26, subversion 0 (v5.26.0) some new warnings have
      occurred when running checkpatch.
      
      Unescaped left brace in regex is deprecated here (and will be fatal in
      Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){
      <-- HERE \s*/ at scripts/checkpatch.pl line 3544.
      
      Unescaped left brace in regex is deprecated here (and will be fatal in
      Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){
      <-- HERE \s*/ at scripts/checkpatch.pl line 3885.
      
      Unescaped left brace in regex is deprecated here (and will be fatal in
      Perl 5.30), passed through in regex; marked by <-- HERE in
      m/^(\+.*(?:do|\))){ <-- HERE / at scripts/checkpatch.pl line 4374.
      
      It seems perfectly reasonable to do as the warning suggests and simply
      escape the left brace in these three locations.
      
      Link: http://lkml.kernel.org/r/20170607060135.17384-1-cyrilbur@gmail.comSigned-off-by: default avatarCyril Bur <cyrilbur@gmail.com>
      Acked-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      93eae954
    • Sahitya Tummala's avatar
      fs/dcache.c: fix spin lockup issue on nlru->lock · a9aa6522
      Sahitya Tummala authored
      commit b17c070f upstream.
      
      __list_lru_walk_one() acquires nlru spin lock (nlru->lock) for longer
      duration if there are more number of items in the lru list.  As per the
      current code, it can hold the spin lock for upto maximum UINT_MAX
      entries at a time.  So if there are more number of items in the lru
      list, then "BUG: spinlock lockup suspected" is observed in the below
      path:
      
        spin_bug+0x90
        do_raw_spin_lock+0xfc
        _raw_spin_lock+0x28
        list_lru_add+0x28
        dput+0x1c8
        path_put+0x20
        terminate_walk+0x3c
        path_lookupat+0x100
        filename_lookup+0x6c
        user_path_at_empty+0x54
        SyS_faccessat+0xd0
        el0_svc_naked+0x24
      
      This nlru->lock is acquired by another CPU in this path -
      
        d_lru_shrink_move+0x34
        dentry_lru_isolate_shrink+0x48
        __list_lru_walk_one.isra.10+0x94
        list_lru_walk_node+0x40
        shrink_dcache_sb+0x60
        do_remount_sb+0xbc
        do_emergency_remount+0xb0
        process_one_work+0x228
        worker_thread+0x2e0
        kthread+0xf4
        ret_from_fork+0x10
      
      Fix this lockup by reducing the number of entries to be shrinked from
      the lru list to 1024 at once.  Also, add cond_resched() before
      processing the lru list again.
      
      Link: http://marc.info/?t=149722864900001&r=1&w=2
      Link: http://lkml.kernel.org/r/1498707575-2472-1-git-send-email-stummala@codeaurora.orgSigned-off-by: default avatarSahitya Tummala <stummala@codeaurora.org>
      Suggested-by: default avatarJan Kara <jack@suse.cz>
      Suggested-by: default avatarVladimir Davydov <vdavydov.dev@gmail.com>
      Acked-by: default avatarVladimir Davydov <vdavydov.dev@gmail.com>
      Cc: Alexander Polakov <apolyakov@beget.ru>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a9aa6522
    • Sahitya Tummala's avatar
      mm/list_lru.c: fix list_lru_count_node() to be race free · a48542e8
      Sahitya Tummala authored
      commit 2c80cd57 upstream.
      
      list_lru_count_node() iterates over all memcgs to get the total number of
      entries on the node but it can race with memcg_drain_all_list_lrus(),
      which migrates the entries from a dead cgroup to another.  This can return
      incorrect number of entries from list_lru_count_node().
      
      Fix this by keeping track of entries per node and simply return it in
      list_lru_count_node().
      
      Link: http://lkml.kernel.org/r/1498707555-30525-1-git-send-email-stummala@codeaurora.orgSigned-off-by: default avatarSahitya Tummala <stummala@codeaurora.org>
      Acked-by: default avatarVladimir Davydov <vdavydov.dev@gmail.com>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Alexander Polakov <apolyakov@beget.ru>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a48542e8
    • Marcin Nowakowski's avatar
      kernel/extable.c: mark core_kernel_text notrace · 8c6f19c2
      Marcin Nowakowski authored
      commit c0d80dda upstream.
      
      core_kernel_text is used by MIPS in its function graph trace processing,
      so having this method traced leads to an infinite set of recursive calls
      such as:
      
        Call Trace:
           ftrace_return_to_handler+0x50/0x128
           core_kernel_text+0x10/0x1b8
           prepare_ftrace_return+0x6c/0x114
           ftrace_graph_caller+0x20/0x44
           return_to_handler+0x10/0x30
           return_to_handler+0x0/0x30
           return_to_handler+0x0/0x30
           ftrace_ops_no_ops+0x114/0x1bc
           core_kernel_text+0x10/0x1b8
           core_kernel_text+0x10/0x1b8
           core_kernel_text+0x10/0x1b8
           ftrace_ops_no_ops+0x114/0x1bc
           core_kernel_text+0x10/0x1b8
           prepare_ftrace_return+0x6c/0x114
           ftrace_graph_caller+0x20/0x44
           (...)
      
      Mark the function notrace to avoid it being traced.
      
      Link: http://lkml.kernel.org/r/1498028607-6765-1-git-send-email-marcin.nowakowski@imgtec.comSigned-off-by: default avatarMarcin Nowakowski <marcin.nowakowski@imgtec.com>
      Reviewed-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Meyer <thomas@m3y3r.de>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Daniel Borkmann <daniel@iogearbox.net>
      Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8c6f19c2
    • Kirill A. Shutemov's avatar
      thp, mm: fix crash due race in MADV_FREE handling · d2b64687
      Kirill A. Shutemov authored
      commit bbf29ffc upstream.
      
      Reinette reported the following crash:
      
        BUG: Bad page state in process log2exe  pfn:57600
        page:ffffea00015d8000 count:0 mapcount:0 mapping:          (null) index:0x20200
        flags: 0x4000000000040019(locked|uptodate|dirty|swapbacked)
        raw: 4000000000040019 0000000000000000 0000000000020200 00000000ffffffff
        raw: ffffea00015d8020 ffffea00015d8020 0000000000000000 0000000000000000
        page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
        bad because of flags: 0x1(locked)
        Modules linked in: rfcomm 8021q bnep intel_rapl x86_pkg_temp_thermal coretemp efivars btusb btrtl btbcm pwm_lpss_pci snd_hda_codec_hdmi btintel pwm_lpss snd_hda_codec_realtek snd_soc_skl snd_hda_codec_generic snd_soc_skl_ipc spi_pxa2xx_platform snd_soc_sst_ipc snd_soc_sst_dsp i2c_designware_platform i2c_designware_core snd_hda_ext_core snd_soc_sst_match snd_hda_intel snd_hda_codec mei_me snd_hda_core mei snd_soc_rt286 snd_soc_rl6347a snd_soc_core efivarfs
        CPU: 1 PID: 354 Comm: log2exe Not tainted 4.12.0-rc7-test-test #19
        Hardware name: Intel corporation NUC6CAYS/NUC6CAYB, BIOS AYAPLCEL.86A.0027.2016.1108.1529 11/08/2016
        Call Trace:
         bad_page+0x16a/0x1f0
         free_pages_check_bad+0x117/0x190
         free_hot_cold_page+0x7b1/0xad0
         __put_page+0x70/0xa0
         madvise_free_huge_pmd+0x627/0x7b0
         madvise_free_pte_range+0x6f8/0x1150
         __walk_page_range+0x6b5/0xe30
         walk_page_range+0x13b/0x310
         madvise_free_page_range.isra.16+0xad/0xd0
         madvise_free_single_vma+0x2e4/0x470
         SyS_madvise+0x8ce/0x1450
      
      If somebody frees the page under us and we hold the last reference to
      it, put_page() would attempt to free the page before unlocking it.
      
      The fix is trivial reorder of operations.
      
      Dave said:
       "I came up with the exact same patch.  For posterity, here's the test
        case, generated by syzkaller and trimmed down by Reinette:
      
        	https://www.sr71.net/~dave/intel/log2.c
      
        And the config that helps detect this:
      
        	https://www.sr71.net/~dave/intel/config-log2"
      
      Fixes: b8d3c4c3 ("mm/huge_memory.c: don't split THP page when MADV_FREE syscall is called")
      Link: http://lkml.kernel.org/r/20170628101249.17879-1-kirill.shutemov@linux.intel.comSigned-off-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Reported-by: default avatarReinette Chatre <reinette.chatre@intel.com>
      Acked-by: default avatarDave Hansen <dave.hansen@intel.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.com>
      Acked-by: default avatarMinchan Kim <minchan@kernel.org>
      Cc: Huang Ying <ying.huang@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d2b64687
    • Ben Hutchings's avatar
      tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: Depth · 68ea25f0
      Ben Hutchings authored
      commit 98dcea0c upstream.
      
      liblockdep has been broken since commit 75dd602a ("lockdep: Fix
      lock_chain::base size"), as that adds a check that MAX_LOCK_DEPTH is
      within the range of lock_chain::depth and in liblockdep it is much
      too large.
      
      That should have resulted in a compiler error, but didn't because:
      
      - the check uses ARRAY_SIZE(), which isn't yet defined in liblockdep
        so is assumed to be an (undeclared) function
      - putting a function call inside a BUILD_BUG_ON() expression quietly
        turns it into some nonsense involving a variable-length array
      
      It did produce a compiler warning, but I didn't notice because
      liblockdep already produces too many warnings if -Wall is enabled
      (which I'll fix shortly).
      
      Even before that commit, which reduced lock_chain::depth from 8 bits
      to 6, MAX_LOCK_DEPTH was too large.
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: a.p.zijlstra@chello.nl
      Link: http://lkml.kernel.org/r/20170525130005.5947-3-alexander.levin@verizon.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      68ea25f0
    • Helge Deller's avatar
      parisc/mm: Ensure IRQs are off in switch_mm() · e3d2adaa
      Helge Deller authored
      commit 649aa242 upstream.
      
      This is because of commit f98db601 ("sched/core: Add switch_mm_irqs_off()
      and use it in the scheduler") in which switch_mm_irqs_off() is called by the
      scheduler, vs switch_mm() which is used by use_mm().
      
      This patch lets the parisc code mirror the x86 and powerpc code, ie. it
      disables interrupts in switch_mm(), and optimises the scheduler case by
      defining switch_mm_irqs_off().
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e3d2adaa
    • Thomas Bogendoerfer's avatar
      parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs · 8ed89cfc
      Thomas Bogendoerfer authored
      commit 33f9e024 upstream.
      
      Enabling parport pc driver on a B2600 (and probably other 64bit PARISC
      systems) produced following BUG:
      
      CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e7 #156
      task: 000000009e050000 task.stack: 000000009e04c000
      
           YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
      PSW: 00001000000001101111111100001111 Not tainted
      r00-03  000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0
      r04-07  0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200
      r08-11  000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0
      r12-15  0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0
      r16-19  0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061
      r20-23  000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40
      r24-27  0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0
      r28-31  0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000
      sr00-03  0000000000000000 0000000000000000 0000000000000000 0000000000000000
      sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000
      
      IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000404aece0 00000000404aece4
       IIR: 03ffe01f    ISR: 0000000010340000  IOR: 000001781304cac8
       CPU:        0   CR30: 000000009e04c000 CR31: 00000000e2976de2
       ORIG_R28: 0000000000000200
       IAOQ[0]: sba_dma_supported+0x80/0xd0
       IAOQ[1]: sba_dma_supported+0x84/0xd0
       RP(r2): parport_pc_probe_port+0x178/0x1200
      
      Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port,
      which PARISC DMA API doesn't handle very nicely. This commit gives back
      DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA
      transaction.
      Signed-off-by: default avatarThomas Bogendoerfer <tsbogend@alpha.franken.de>
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8ed89cfc
    • Eric Biggers's avatar
      parisc: use compat_sys_keyctl() · bf1e4dc3
      Eric Biggers authored
      commit b0f94efd upstream.
      
      Architectures with a compat syscall table must put compat_sys_keyctl()
      in it, not sys_keyctl().  The parisc architecture was not doing this;
      fix it.
      Signed-off-by: default avatarEric Biggers <ebiggers@google.com>
      Acked-by: default avatarHelge Deller <deller@gmx.de>
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bf1e4dc3
    • Helge Deller's avatar
      parisc: Report SIGSEGV instead of SIGBUS when running out of stack · 008a1f27
      Helge Deller authored
      commit 24746231 upstream.
      
      When a process runs out of stack the parisc kernel wrongly faults with SIGBUS
      instead of the expected SIGSEGV signal.
      
      This example shows how the kernel faults:
      do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000]
      trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000
      
      The vma->vm_end value is the first address which does not belong to the vma, so
      adjust the check to include vma->vm_end to the range for which to send the
      SIGSEGV signal.
      
      This patch unbreaks building the debian libsigsegv package.
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      008a1f27
    • Suzuki K Poulose's avatar
      irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity · 59613f80
      Suzuki K Poulose authored
      commit 866d7c1b upstream.
      
      The GICv3 driver doesn't check if the target CPU for gic_set_affinity
      is valid before going ahead and making the changes. This triggers the
      following splat with KASAN:
      
      [  141.189434] BUG: KASAN: global-out-of-bounds in gic_set_affinity+0x8c/0x140
      [  141.189704] Read of size 8 at addr ffff200009741d20 by task swapper/1/0
      [  141.189958]
      [  141.190158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.12.0-rc7
      [  141.190458] Hardware name: Foundation-v8A (DT)
      [  141.190658] Call trace:
      [  141.190908] [<ffff200008089d70>] dump_backtrace+0x0/0x328
      [  141.191224] [<ffff20000808a1b4>] show_stack+0x14/0x20
      [  141.191507] [<ffff200008504c3c>] dump_stack+0xa4/0xc8
      [  141.191858] [<ffff20000826c19c>] print_address_description+0x13c/0x250
      [  141.192219] [<ffff20000826c5c8>] kasan_report+0x210/0x300
      [  141.192547] [<ffff20000826ad54>] __asan_load8+0x84/0x98
      [  141.192874] [<ffff20000854eeec>] gic_set_affinity+0x8c/0x140
      [  141.193158] [<ffff200008148b14>] irq_do_set_affinity+0x54/0xb8
      [  141.193473] [<ffff200008148d2c>] irq_set_affinity_locked+0x64/0xf0
      [  141.193828] [<ffff200008148e00>] __irq_set_affinity+0x48/0x78
      [  141.194158] [<ffff200008bc48a4>] arm_perf_starting_cpu+0x104/0x150
      [  141.194513] [<ffff2000080d73bc>] cpuhp_invoke_callback+0x17c/0x1f8
      [  141.194783] [<ffff2000080d94ec>] notify_cpu_starting+0x8c/0xb8
      [  141.195130] [<ffff2000080911ec>] secondary_start_kernel+0x15c/0x200
      [  141.195390] [<0000000080db81b4>] 0x80db81b4
      [  141.195603]
      [  141.195685] The buggy address belongs to the variable:
      [  141.196012]  __cpu_logical_map+0x200/0x220
      [  141.196176]
      [  141.196315] Memory state around the buggy address:
      [  141.196586]  ffff200009741c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [  141.196913]  ffff200009741c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [  141.197158] >ffff200009741d00: 00 00 00 00 fa fa fa fa 00 00 00 00 00 00 00 00
      [  141.197487]                                ^
      [  141.197758]  ffff200009741d80: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00
      [  141.198060]  ffff200009741e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [  141.198358] ==================================================================
      [  141.198609] Disabling lock debugging due to kernel taint
      [  141.198961] CPU1: Booted secondary processor [410fd051]
      
      This patch adds the check to make sure the cpu is valid.
      
      Fixes: commit 021f6537 ("irqchip: gic-v3: Initial support for GICv3")
      Signed-off-by: default avatarSuzuki K Poulose <suzuki.poulose@arm.com>
      Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      59613f80
    • Srinivas Dasari's avatar
      cfg80211: Check if NAN service ID is of expected size · 6a90f81a
      Srinivas Dasari authored
      commit 0a27844c upstream.
      
      nla policy checks for only maximum length of the attribute data when the
      attribute type is NLA_BINARY. If userspace sends less data than
      specified, cfg80211 may access illegal memory. When type is NLA_UNSPEC,
      nla policy check ensures that userspace sends minimum specified length
      number of bytes.
      
      Remove type assignment to NLA_BINARY from nla_policy of
      NL80211_NAN_FUNC_SERVICE_ID to make these NLA_UNSPEC and to make sure
      minimum NL80211_NAN_FUNC_SERVICE_ID_LEN bytes are received from
      userspace with NL80211_NAN_FUNC_SERVICE_ID.
      
      Fixes: a442b761 ("cfg80211: add add_nan_func / del_nan_func")
      Signed-off-by: default avatarSrinivas Dasari <dasaris@qti.qualcomm.com>
      Signed-off-by: default avatarJouni Malinen <jouni@qca.qualcomm.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6a90f81a
    • Srinivas Dasari's avatar
      cfg80211: Check if PMKID attribute is of expected size · 7e9e9638
      Srinivas Dasari authored
      commit 9361df14 upstream.
      
      nla policy checks for only maximum length of the attribute data
      when the attribute type is NLA_BINARY. If userspace sends less
      data than specified, the wireless drivers may access illegal
      memory. When type is NLA_UNSPEC, nla policy check ensures that
      userspace sends minimum specified length number of bytes.
      
      Remove type assignment to NLA_BINARY from nla_policy of
      NL80211_ATTR_PMKID to make this NLA_UNSPEC and to make sure minimum
      WLAN_PMKID_LEN bytes are received from userspace with
      NL80211_ATTR_PMKID.
      
      Fixes: 67fbb16b ("nl80211: PMKSA caching support")
      Signed-off-by: default avatarSrinivas Dasari <dasaris@qti.qualcomm.com>
      Signed-off-by: default avatarJouni Malinen <jouni@qca.qualcomm.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7e9e9638
    • Srinivas Dasari's avatar
      cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES · e4712906
      Srinivas Dasari authored
      commit d7f13f74 upstream.
      
      validate_scan_freqs() retrieves frequencies from attributes
      nested in the attribute NL80211_ATTR_SCAN_FREQUENCIES with
      nla_get_u32(), which reads 4 bytes from each attribute
      without validating the size of data received. Attributes
      nested in NL80211_ATTR_SCAN_FREQUENCIES don't have an nla policy.
      
      Validate size of each attribute before parsing to avoid potential buffer
      overread.
      
      Fixes: 2a519311 ("cfg80211/nl80211: scanning (and mac80211 update to use it)")
      Signed-off-by: default avatarSrinivas Dasari <dasaris@qti.qualcomm.com>
      Signed-off-by: default avatarJouni Malinen <jouni@qca.qualcomm.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e4712906
    • Srinivas Dasari's avatar
      cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE · b68aa7df
      Srinivas Dasari authored
      commit 8feb69c7 upstream.
      
      Buffer overread may happen as nl80211_set_station() reads 4 bytes
      from the attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE without
      validating the size of data received when userspace sends less
      than 4 bytes of data with NL80211_ATTR_LOCAL_MESH_POWER_MODE.
      Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE to avoid
      the buffer overread.
      
      Fixes: 3b1c5a53 ("{cfg,nl}80211: mesh power mode primitives and userspace access")
      Signed-off-by: default avatarSrinivas Dasari <dasaris@qti.qualcomm.com>
      Signed-off-by: default avatarJouni Malinen <jouni@qca.qualcomm.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b68aa7df
    • Bert Kenward's avatar
      sfc: don't read beyond unicast address list · 6ae9dd28
      Bert Kenward authored
      
      [ Upstream commit c70d6815 ]
      
      If we have more than 32 unicast MAC addresses assigned to an interface
      we will read beyond the end of the address table in the driver when
      adding filters. The next 256 entries store multicast addresses, so we
      will end up attempting to insert duplicate filters, which is mostly
      harmless. If we add more than 288 unicast addresses we will then read
      past the multicast address table, which is likely to be more exciting.
      
      Fixes: 12fb0da4 ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode")
      Signed-off-by: default avatarBert Kenward <bkenward@solarflare.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6ae9dd28