- 31 Oct, 2016 40 commits
-
-
Liad Kaufman authored
commit a0315dea upstream. When a STA is removed in DQA mode, if no traffic went through its reserved queue, the txq continues to be marked as reserved and no STA can use it. Make sure that in such a case the reserved queue is marked as free when the STA is removed. Fixes: commit 24afba76 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues") Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sara Sharon authored
commit ca3b9c6b upstream. Since the SCD_QUEUE_CFG command was introduced the driver calls iwl_trans_txq_enable_cfg() with a NULL for scd_cfg parameter. This makes the transport avoid writing to the SCD pointers, since it can cause races with firmware, which is also accessing the registers. The transport only updates the write pointer in that case. Fix a wrong call to iwl_trans_txq_enable() which caused a scd_cfg parameter to be sent to transport, resulting with an access to SCD registers. Fixes: 58f2cc57 ("iwlwifi: mvm: support dqa-mode scd queue redirection") Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Liad Kaufman authored
commit 7585c354 upstream. In iwl_mvm_rx_tx_cmd_single(), when checking if a given TID is aggregated, the driver doesn't check whether or not the queue itself can be aggregated. For example, a management queue might be marked as aggregated if TID 0 is aggregated on a (different) data queue. Make sure that mgmt frames are sent with TID IWL_TID_NON_QOS, and in this way make sure no mixups of this sort happen. Fixes: commit 24afba76 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues") Signed-off-by:
-
Haim Dreyfuss authored
commit a6c934b3 upstream. In 9000 family products we added an option to let the OEM fuse the mac address via registers. If these registers are zeroed we use the OTP address instead. Make sure that the address provided by the OEM is valid and, if not, fall back to the OTP address as well. Fixes: commit 17c867bf ("iwlwifi: add support for getting HW address from CSR") Signed-off-by:
Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 432746f8 upstream. When we call symbol__fixup_duplicate() we use algorithms to pick the "best" symbols for cases where there are various functions/aliases to an address, and those check zero size symbols, which, before calling symbol__fixup_end() are _all_ symbols in a just parsed kallsyms file. So first fixup the end, then fixup the duplicates. Found while trying to figure out why 'perf test vmlinux' failed, see the output of 'perf test -v vmlinux' to see cases where the symbols picked as best for vmlinux don't match the ones picked for kallsyms. Cc: Anton Blanchard <anton@samba.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 694bf407 ("perf symbols: Add some heuristics for choosing the best duplicate symbol") Link: http://lkml.kernel.org/n/tip-rxqvdgr0mqjdxee0kf8i2ufn@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit c97b40e4 upstream. We can allow aliases to be kept, but we were checking this just when loading vmlinux files, be consistent, do it for any symbol table loading code that calls symbol__fixup_duplicate() by making this function check .allow_aliases instead. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 680d926a ("perf symbols: Allow symbol alias when loading map for symbol name") Link: http://lkml.kernel.org/n/tip-z0avp0s6cfjckc4xj3pdfjdz@git.kernel.orgSigned-off-by:
-
Namhyung Kim authored
commit 9a6ad25b upstream. When the --hierarchy option is used, each entry has its own hpp_list to show the result. But it is not updating the width of each column for perf-top. The perf-report command has no problem since it resets it during header display. $ sudo perf top --hierarchy --stdio PerfTop: 160 irqs/sec kernel:38.8% exact: 100.0% [4000Hz cycles:pp], (all, 12 CPUs) ---------------------------------------------------------------------- 52.32% perf 24.74% [.] __symbols__insert 5.62% [.] rb_next 5.14% [.] dso__load_sym Move the code into hists__fprintf() so that it can be called always. Also it'd be better to put similar code together. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
-
Namhyung Kim authored
commit 5ff3e7a2 upstream. When --hierarchy option is used, each entry has its own hpp_list to show the result. But it missed to update width of each column. Before: - 46.29% 48.12% netctl-auto + 31.44% 29.25% [kernel.vmlinux] + 8.52% 11.55% libc-2.22.so + 5.19% 6.91% bash + 10.75% 11.83% wpa_cli + 8.25% 2.23% swapper + 6.45% 5.40% tr + 4.81% 8.09% awk + 4.15% 2.85% firefox + 3.86% 2.53% sh After: - 46.29% 48.12% netctl-auto + 31.44% 29.25% [kernel.vmlinux] + 8.52% 11.55% libc-2.22.so + 5.19% 6.91% bash + 10.75% 11.83% wpa_cli + 8.25% 2.23% swapper + 6.45% 5.40% tr + 4.81% 8.09% awk + 4.15% 2.85% firefox + 3.86% 2.53% sh Committer note: Full testing instructions: 1) Record with an event group: $ perf record -e '{cycles,instructions}' make -j4 2) Use report in hierarchy mode, to get a few expanded trees on the same screen, use --percent-limit: $ perf report --hierarchy --percent-limit 0.5 Samples: 103K of event 'anon group { cycles:u, instructions:u }', Event count (approx.): 57317631725 Overhead Command / Shared Object / Symbol ◆ - 58.89% 55.12% cc1 ▒ - 50.26% 48.10% cc1 ▒ 3.61% 5.13% [.] _cpp_lex_token ▒ 2.58% 0.78% [.] ht_lookup_with_hash ▒ 1.31% 1.30% [.] ggc_internal_alloc ▒ 1.08% 2.25% [.] get_combined_adhoc_loc ▒ 1.01% 1.95% [.] ira_init ▒ 0.96% 1.78% [.] linemap_position_for_column ▒ 0.65% 1.01% [.] cpp_get_token_with_location ▒ - 7.52% 6.58% libc-2.23.so ▒ 1.70% 1.78% [.] _int_malloc ▒ 0.69% 0.75% [.] _int_free ▒ 0.67% 0.42% [.] malloc_consolidate ▒ - 0.58% 0.42% ld-2.23.so ▒ no entry >= 0.50% ▒ - 0.52% 0.03% [kernel.vmlinux] ▒ no entry >= 0.50% ▒ Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 1b2dbbf4 ("perf hists: Use own hpp_list for hierarchy mode") Link: http://lkml.kernel.org/r/20160920053025.13989-1-namhyung@kernel.orgSigned-off-by:
-
Ravi Bangoria authored
commit 25b8592e upstream. 'make -C tools/perf build-test' is failing with below log for poewrpc. In file included from /tmp/tmp.3eEwmGlYaF/perf-4.8.0-rc4/tools/perf/perf.h:15:0, from util/cpumap.h:8, from util/env.c:1: /tmp/tmp.3eEwmGlYaF/perf-4.8.0-rc4/tools/perf/perf-sys.h:23:56: fatal error: ../../arch/powerpc/include/uapi/asm/unistd.h: No such file or directory compilation terminated. I bisected it and found it's failing from commit ad430729 ("Remove: kernel unistd*h files from perf's MANIFEST, not used"). Header file '../../arch/powerpc/include/uapi/asm/unistd.h' is included only for powerpc in tools/perf/perf-sys.h. By looking closly at commit history, I found little weird thing: Commit f2d9cae9 ("perf powerpc: Use uapi/unistd.h to fix build error") replaced 'asm/unistd.h' with 'uapi/asm/unistd.h' Commit d2709c7c ("perf: Make perf build for x86 with UAPI disintegration applied") removes all arch specific 'uapi/asm/unistd.h' for all archs and adds generic <asm/unistd.h>. Commit f0b9abfb ("Merge branch 'linus' into perf/core") again includes 'uapi/asm/unistd.h' for powerpc. Don't know how exactly this happened as this change is not part of commit also. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1472630591-5089-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Fixes: ad430729 ("Remove: kernel unistd*h files from perf's MANIFEST, not used") Signed-off-by:
-
Namhyung Kim authored
commit d9ea48bc upstream. Milian reported that the event group on TUI shows duplicated overhead. This was due to a bug on calculating hpp->buf position. The hpp_advance() was called from __hpp__slsmg_color_printf() on TUI but it's already called from the hpp__call_print_fn macro in __hpp__fmt(). The end result is that the print function returns number of bytes it printed but the buffer advanced twice of the length. This is generally not a problem since it doesn't need to access the buffer again. But with event group, overhead needs to be printed multiple times and hist_entry__snprintf_alignment() tries to fill the space with buffer after it printed. So it (brokenly) showed the last overhead again. The bug was there from the beginning, but I think it's only revealed when the alignment function was added. Reported-by:
Milian Wolff <milian.wolff@kdab.com> Signed-off-by:
-
Wang Nan authored
commit f2c8852e upstream. On ARM32 building it report following error when we build with libbabeltrace: util/data-convert-bt.c: In function 'add_bpf_output_values': util/data-convert-bt.c:440:3: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Werror=format] cc1: all warnings being treated as errors Fix it by changing %lu to %zu. Signed-off-by:
Wang Nan <wangnan0@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Fixes: 6122d57e ("perf data: Support converting data from bpf_perf_event_output()") Link: http://lkml.kernel.org/r/1475035126-146587-1-git-send-email-wangnan0@huawei.comSigned-off-by:
-
Geert Uytterhoeven authored
commit 2cf9a578 upstream. clk-divider uses clk_readl()/clk_writel() everywhere, except in clk_divider_round_rate(), where plain readl() is used. Change this to clk_readl(), as it makes a difference on powerpc. Fixes: e6d5e7d9 ("clk-divider: Fix READ_ONLY when divider > 1") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Jean-Francois Moine authored
commit 3174b0c9 upstream. This patch reverts commit 023bd716 ("clk: skip unnecessary set_phase if nothing to do"), fixing two problems: * in some SoCs, the hardware phase delay depends on the rate ratio of the clock and its parent. So, changing this ratio may imply to set new hardware values, even if the logical delay is the same. * when the delay was the same as previously, an error was returned. Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Fixes: 023bd716 ("clk: skip unnecessary set_phase if nothing to do") Signed-off-by:
-
Stephen Boyd authored
commit f155d15b upstream. Before commit 0861e5b8 (clk: Add clk_hw OF clk providers, 2016-02-05) __of_clk_get_from_provider() would return an error pointer of the provider's choosing if there was a provider registered and EPROBE_DEFER otherwise. After that commit, it would return EPROBE_DEFER regardless of whether or not the provider returned an error. This is odd and can lead to behavior where clk consumers keep probe deferring when they should be seeing some other error. Let's restore the previous behavior where we only return EPROBE_DEFER when there isn't a provider in our of_clk_providers list. Otherwise, return the error from the last provider we find that matches the node. Reported-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Fixes: 0861e5b8 ("clk: Add clk_hw OF clk providers") Signed-off-by:
-
Tang Yuantian authored
commit 8964193f upstream. The offset of Core Cluster clock control/status register on cluster group V3 version is different from others, and should be plus 0x70000. Signed-off-by:
Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by:
Scott Wood <oss@buserror.net> Fixes: 9e19ca2f ("clk: qoriq: Add ls2080a support.") Signed-off-by:
-
Srinivas Kandagatla authored
commit 6d91f2c0 upstream. This patch selects QCOM_GDSC Kconfig for msm8996 GCC and MMCC clock controllers, as these provide some of the gdscs on the SOC. Also selecting this config will make it align with other drivers which do the same. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: 52111672 ("clk: qcom: gdsc: Add GDSCs in msm8996 GCC") Fixes: 7e824d50 ("clk: qcom: gdsc: Add mmcc gdscs for msm8996 family") Signed-off-by:
-
Srinivas Kandagatla authored
commit ce61966c upstream. This patch corrects the register offset for pcie2 pipe clock. Offset according to datasheet is 0x6e018 instead of 0x6e108. Signed-off-by:
-
Eric Anholt authored
commit 67615c58 upstream. If the firmware had set up a clock to source from PLLC, go along with it. But if we're looking for a new parent, we don't want to switch it to PLLC because the firmware will force PLLC (and thus the AXI bus clock) to different frequencies during over-temp/under-voltage, without notification to Linux. On my system, this moves the Linux-enabled HDMI state machine and DSI1 escape clock over to plld_per from pllc_per. EMMC still ends up on pllc_per, because the firmware had set it up to use that. Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks") Acked-by:
Martin Sperl <kernel@martin.sperl.org> Signed-off-by:
-
Sascha Silbe authored
commit 6cd997db upstream. con3270 contains an optimisation that reduces the amount of data to be transmitted to the 3270 terminal by putting a Repeat to Address (RA) order into the data stream. The RA order itself takes up space, so con3270 only uses it if there's enough space left in the line buffer. Otherwise it just pads out the line manually. For lines that were _just_ short enough that the RA order still fit in the line buffer, the line was instead padded with an insufficient amount of spaces. This was caused by examining the size of the allocated line buffer rather than the length of the string to be displayed. For con3270_cline_end(), we just compare against the line length. For con3270_update_string() however that isn't available anymore, so we check whether the Repeat to Address order is present. Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Tested-by:
Jing Liu <liujbjl@linux.vnet.ibm.com> Tested-by:
Yang Chen <bjcyang@linux.vnet.ibm.com> Signed-off-by:
Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Sascha Silbe authored
commit c14f2aac upstream. con3270 contains an optimisation that reduces the amount of data to be transmitted to the 3270 terminal by putting a Repeat to Address (RA) order into the data stream. The RA order itself takes up space, so con3270 only uses it if there's enough space left in the line buffer. Otherwise it just pads out the line manually. For lines too long to include the RA order, one byte was left uninitialised. This was caused by an off-by-one bug in the loop that pads out the line. Since the buffer is allocated from a common pool, the single byte left uninitialised contained some previous buffer content. Usually this was just a space or some character (which can result in clutter but is otherwise harmless). Sometimes, however, it was a Repeat to Address order, messing up the entire screen layout and causing the display to send the entire buffer content on every keystroke. Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Reported-by:
-
Sebastian Ott authored
commit d53c51f2 upstream. Since commit 9f3d6d7a chsc_get_channel_measurement_chars is called with interrupts disabled during resume from hibernate. Since this function used spin_unlock_irq, interrupts have been enabled accidentally. Fix this by using the irqsave variant. Since we can't guarantee the IRQ-enablement state for all (future/ external) callers, change the locking in related functions to prevent similar bugs in the future. Fixes: 9f3d6d7a ("s390/cio: update measurement characteristics") Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
-
Thomas Hellstrom authored
commit a1944030 upstream. When a view destruction command was present in the command stream, the view was validated to avoid a device error. That caused excessive and unnecessary validations of views, surfaces and mobs on view destruction. Replace this with a new relocation type that patches the view destruction command to a NOP if the view is not present in the device after the execbuf validation sequence. Also add checks for the member size of the vmw_res_relocation struct. Fixes sporadic command submission errors on google-earth exit. Reported-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Gerald Schaefer authored
commit eb03aa00 upstream. For every pfn aligned to minimum_order, dissolve_free_huge_pages() will call dissolve_free_huge_page() which takes the hugetlb spinlock, even if the page is not huge at all or a hugepage that is in-use. Improve this by doing the PageHuge() and page_count() checks already in dissolve_free_huge_pages() before calling dissolve_free_huge_page(). In dissolve_free_huge_page(), when holding the spinlock, those checks need to be revalidated. Link: http://lkml.kernel.org/r/20160926172811.94033-4-gerald.schaefer@de.ibm.comSigned-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rui Teng <rui.teng@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Gerald Schaefer authored
commit 082d5b6b upstream. In dissolve_free_huge_pages(), free hugepages will be dissolved without making sure that there are enough of them left to satisfy hugepage reservations. Fix this by adding a return value to dissolve_free_huge_pages() and checking h->free_huge_pages vs. h->resv_huge_pages. Note that this may lead to the situation where dissolve_free_huge_page() returns an error and all free hugepages that were dissolved before that error are lost, while the memory block still cannot be set offline. Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Link: http://lkml.kernel.org/r/20160926172811.94033-3-gerald.schaefer@de.ibm.comSigned-off-by:
-
Arnd Bergmann authored
commit 86c7e683 upstream. A workaround for a warning introduced a use of the NO_IRQ macro that should have been gone for a long time. It is clear from the code that the value cannot actually be used, but apparently there was a configuration at some point that caused a warning, so instead of just reverting that patch, this rearranges the code in a way that the warning cannot reappear. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 6ef41cf6 ("dmaengine :ipu: change ipu_irq_handler() to remove compile warning") Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Georges Savoundararadj authored
commit 06107359 upstream. bq->charger is initialized in bq24257_power_supply_init. Therefore, bq24257_power_supply_init should be called before the registration of the IRQ handler bq24257_irq_handler_thread that calls power_supply_changed(bq->charger). Signed-off-by:
Georges Savoundararadj <savoundg@gmail.com> Cc: Aurelien Chanot <chanot.a@gmail.com> Cc: Andreas Dannenberg <dannenberg@ti.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Fixes: 2219a935 ("power_supply: Add TI BQ24257 charger driver") Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Maor Gottlieb authored
commit 7055a294 upstream. Fix multicast flow rule leak on adding unicast rule failure. Fixes: 038d2ef8 ('IB/mlx5: Add flow steering support') Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Dennis Dalessandro authored
commit 84b3adc2 upstream. There is no need to have a global qpt_mask as that does not support the multiple chip model which qib has. Instead rely on the value which exists already in the device data (dd). Fixes: 898fa52b "IB/qib: Remove qpn, qp tables and related variables from qib" Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
commit eefa1d89 upstream. The __must_hold() is sufficent to correct the sparse context imbalance inside a function. Per Documentation/sparse.txt: __must_hold - The specified lock is held on function entry and exit. Fixes: Commit c0a67f6b ("IB/rdmavt: Annotate rvt_reset_qp()") Reviewed-by:
-
Mike Marciniszyn authored
commit 5a648dfa upstream. The call is misplaced in the reset calldown function and causes issues with lockdep assertions that are to be added. Fixes: Commit a2c2d608 ("staging/rdma/hfi1: Remove create_qp functionality") Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
-
Nicholas Mc Guire authored
commit 9afe11e9 upstream. Private functions in ks_hostif.c can be declared static. Fixes: 13a9930d ("staging: ks7010: add driver from Nanonote extra-repository") Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Nicholas Mc Guire authored
commit 9d29f14d upstream. wait_for_completion_interruptible_timeout return 0 on timeout and -ERESTARTSYS if interrupted. The check for !wait_for_completion_interruptible_timeout() would report an interrupt as timeout. Further, while HZ/50 will work most of the time it could fail for HZ < 50, so this is switched to msecs_to_jiffies(20). Fixes: 13a9930d ("staging: ks7010: add driver from Nanonote extra-repository") Signed-off-by:
-
Larry Finger authored
commit 1335a951 upstream. Commit fadbe0cd ("staging: rtl8188eu: Remove rtw_zmalloc(), wrapper for kzalloc()") changed all allocation calls to be GFP_KERNEL even though the original wrapper was testing to determine if the caller was in atomic mode. Most of the mistakes were corrected with commit 33dc85c3 ("staging: r8188eu: Fix scheduling while atomic error introduced in commit fadbe0cd"); however, two kzalloc calls were missed as the call only happens when the driver is shutting down. Fixes: fadbe0cd ("staging: rtl8188eu: Remove rtw_zmalloc(), wrapper for kzalloc()") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: navin patidar <navin.patidar@gmail.com> Signed-off-by:
-
Phil Turnbull authored
commit 992f9614 upstream. Commit 6fba39cf ("staging: sm750fb: use BIT macro for PANEL_DISPLAY_CTRL single-bit fields") accidentally changed the CLOCK_PHASE logic from '|=' to '=' which clears all the previously set bits. Fixes: 6fba39cf ("staging: sm750fb: use BIT macro for PANEL_DISPLAY_CTRL single-bit fields") Signed-off-by:
Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
commit 4a236d01 upstream. The newly added Hi6220 Ion code fails to build when the ION_OF helpers are not present: drivers/staging/android/ion/hisilicon/hi6220_ion.o: In function `hi6220_ion_remove': hi6220_ion.c:(.text.hi6220_ion_remove+0x4c): undefined reference to `ion_destroy_platform_data' drivers/staging/android/ion/hisilicon/hi6220_ion.o: In function `hi6220_ion_probe': hi6220_ion.c:(.text.hi6220_ion_probe+0x5c): undefined reference to `ion_parse_dt' hi6220_ion.c:(.text.hi6220_ion_probe+0xf8): undefined reference to `ion_destroy_platform_data' This selects the symbol when needed. Fixes: 2b40182a ("staging: android: ion: Add ion driver for Hi6220 SoC platform") Signed-off-by:
Laura Abbott <labbott@redhat.com> Reviewed-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Christophe JAILLET authored
commit 281269f8 upstream. It is likely that checking the result of 'pm_runtime_set_active' is expected here. Fixes: f0e5f57d ("iio: light: us8152d: Add power management support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Colin Ian King authored
commit 9d47964b upstream. The comparison for devnr limits is off-by-one, the current check allows 0 to AD5755_NUM_CHANNELS and the limit should be in fact 0 to AD5755_NUM_CHANNELS - 1. This can lead to an out of bounds write to pdata->dac[devnr]. Fix this by replacing > with >= on the comparison. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Fixes: c9474599 ("iio: ad5755: add support for dt bindings") Signed-off-by:
-
Takashi Sakamoto authored
commit 43d443dc upstream. Sparse reports below warnings. bxt_da7219_max98357a.c:250:9: warning: obsolete array initializer, use C99 syntax bxt_da7219_max98357a.c:275:9: warning: obsolete array initializer, use C99 syntax bxt_da7219_max98357a.c:290:9: warning: obsolete array initializer, use C99 syntax bxt_da7219_max98357a.c:304:9: warning: obsolete array initializer, use C99 syntax bxt_da7219_max98357a.c:317:9: warning: obsolete array initializer, use C99 syntax There's no need to use obsoleted way. This commit fixes it. Fixes: 723bad3f (ASoC: Intel: Add Broxton-P Dialog Maxim machine driver) Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Sakamoto authored
commit 5919a389 upstream. Sparse reports below warnings. bxt_rt298.c:275:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:290:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:304:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:317:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:331:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:344:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:357:9: warning: obsolete array initializer, use C99 syntax There's no need to use obsoleted way. This commit fixes it. Fixes: 76016322 (ASoC: Intel: Add Broxton-P machine driver) Signed-off-by:
-
Chen-Yu Tsai authored
commit a3930ed0 upstream. Commit d88429a6 ("ASoC: dapm: Add output driver widget") added the snd_soc_dapm_out_drv ID for the output driver widget, which is the same as the PGA widget, with a later power sequence number. Commit 19a2557b ("ASoC: dapm: Add kcontrol support for PGAs") then added kcontrol support for PGA widgets, but failed to account for output driver widgets. Attempts to use kcontrols with output driver widgets result in silent failures, with the developer having little idea about what went on. Add snd_soc_dapm_out_drv to the switch/case block under snd_soc_dapm_pga in dapm_create_or_share_kcontrol, since they are essentially the same. Fixes: 19a2557b (ASoC: dapm: Add kcontrol support for PGAs) Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
