- 14 Mar, 2012 5 commits
-
-
Jesse Brandeburg authored
using the form min((int)var, ver)) is replaced by min_t(int, ...) Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
This is clearly a typeo where we are not checking the return value from get_link_capabilities but should. This patch corrects that. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
There isn't much point in using variables to store the values of eitr_low and eitr_high since they are not user changeable. As such I am replacing them with the constants 10 and 20 in order to avoid any confusion on what the values actually are. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
A previous fix had gone though and disabled relaxed ordering for Rx descriptor read fetching. This was not necessary as this functions correctly and has no ill effects on the system. In addition several of the defines used for the DCA control registers were incorrect in that they indicated descriptor effects when they actually had an impact on either data or header write back. As such I have update these to correctly reflect either DATA or HEAD. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Joe Perches authored
Use the current logging styles. Remove unnecessary _DEBUG_DRIVER_ and PFX, use pr_debug. Coalesce format. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 13 Mar, 2012 26 commits
-
-
Alexander Duyck authored
This change makes it a bit easier to do the loopback frame creating and testing. Previously we were doing an and to drop the last bit, and then dividing the frame_size by 2 in order to get locations for frame bytes and testing. Instead we can simplify it by just shifting the register one bit to the right and using that for the frame offsets. This change also replaces all instances of rx_buffer_info with just rx_buffer since that is closer to the name of the actual structure being used and can save a few extra characters. In addition I have updated the logic for cleaning up a test frame so that we pass an rx_buffer instead of the sk_buff. The main motivation behind this is changes that will replace the sk_buff with just a page in the future. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
Since there are multiple spots where we have to cycle through all of the rings on a q_vector it makes sense to just add a function for iterating through all of them. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This patch makes the rings a part of the q_vector directly instead of indirectly. Specifically on x86 systems this helps to avoid any cache set conflicts between the q_vector, the tx_rings, and the rx_rings as the critical stride is 4K and in order to cross that boundary you would need to have over 15 rings on a single q_vector. In addition this allows for smarter allocations when Flow Director is enabled. Previously Flow Director would set the irq_affinity hints based on the CPU and was still using a node interleaving approach which on some systems would end up with the two values mismatched. With the new approach we can set the affinity for the irq_vector and use the CPU for that affinity to determine the node value for the node and the rings. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This patch is a minor cleanup to address the unnecessary use of napi_schedule_prep in ixgbe_intr and to also remove a blank line that is not needed since it is separating a comment from the line it is explaining. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
The old code had several errors in how it was determining the vector budget. In order to simplify things this patch updates the code so that it will attempt to always allocated paired Rx/Tx vectors instead of attempting to allocate individual vectors when the number of queues is less than the number of CPUs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change corrects an issue in which Adaptive Interrupt Moderation was not changing values due to the fact that we were performing an and operation on the resultant value that was causing the value to never change from the default 20K interrupts per second. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change is meant to address the fact that the tx_itr_setting was dropping to 0 when no separate Tx vectors were provided. This had resulted in the driver incorrectly configuring the Tx ring with a WTHRESH of 1 in order to avoid Tx hangs even though that was not necessary. This change makes it so that we instead take a look at the Tx ring's q_vector to determine if the ring will have an ITR value less than 8us. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change moves several frequently accessed items together into one cache line in order to reduce cache misses in the hot-path. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
There isn't any need to clear the status bits in the descriptors due to the fact that the eop_desc provides enough information for us to know that we have cleaned to the last packet that the software has put on the ring. The status bits are cleared as a part of putting the frame on the ring so as long as we do not read the descriptor bit prior to reading the value eop_desc we should be able to guarantee that we will not clean beyond the end of the current data stream. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change adds a memory barrier to the byte queue limit code to address a possible race as has been seen in the past with the netif_stop_queue/netif_wake_queue logic. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
We are seeing dev_watchdog hangs on several drivers. I suspect this is due to the __QUEUE_STATE_STACK_XOFF bit being set prior to a reset for link change, and then not being cleared by netdev_tx_reset_queue. This change corrects that. In addition we were seeing dev_watchdog hangs on igb after running the ethtool tests. We found this to be due to the fact that the ethtool test runs the same logic as ndo_start_xmit, but we were never clearing the XOFF flag since the loopback test in ethtool does not do byte queue accounting. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This adds support for byte queue limits (BQL). Based on patch from Eric Dumazet for igb. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com>
-
Jeff Kirsher authored
As noted by Ben Hutchings and David Miller, work limits for NAPI should not be tied to interrupt moderation parameters. This should be handled by NAPI, possibly through sysfs. Neil Horman & Stephen Hemminger are working on a solution for NAPI currently. In the meantime, remove this tie between work limits and interrupt moderation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Ben Hutchings <bhutchings@solarflare.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
-
Jeff Kirsher authored
A bug was introduced with the following patch: Commmit bdbc0631 Author: Eric Dumazet <eric.dumazet@gmail.com> igb: Add support for byte queue limits. The ethtool offline tests will cause a perpetual link flap, this is because the tests also need to account for byte queue limits (BQL). CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
-
Dmitry Kravkov authored
Previously, allocation used queue statistics directly in its calcualtion. This change causes these calculations to be summed into the statistics, without being affected by them. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Previously, if autoneg failed, ethtool would return the achieved autoneg. This patch corrects this, causing ethtool to return the requested autoneg capabilities even if autoneg fails. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Previously, unless both interface and link were up, ethtool returned the requested speed/duplex when asked for the interface's settings. This change will now enable the driver to answer correctly (i.e., return unknown as its answer). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
This change enables the FW to make more accurate decisions regarding the active functions. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Previously, we've used the object's function id instead of using the input's value. This is remedied, as in other flows. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Previously, we used a hard-coded value as paramater, instead of using the input's value. This is now remedied, as in other flows. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
These definitions are united into the header. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stigge@antcom.de authored
This patch adds an ethernet driver for the LPC32xx ARM SoC. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
With this feature, a Linux guest can now configure multiple vlans through a single synthetic NIC on Win8 Hyper-V host. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
Limiting the memcpy to be the sizeof(struct rndis_message) can truncate the message if there are Per-Packet-Info or Out-of-Band data. In my earlier patch (commit 45326342), the unnecessary kmap_atomic and kunmap_atomic surrounding this memcpy have been removed because the memory in the receive buffer is always mapped. This memcpy is not necessary either. To fix the bug, I removed the memcpy. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Add #define pr_fmt(fmt) as appropriate. Add "IPv4: ", "TCP: ", and "IPsec: " to appropriate files. Standardize on "UDPLite: " for appropriate uses. Some prefixes were previously "UDPLITE: " and "UDP-Lite: ". Add KBUILD_MODNAME ": " to icmp and gre. Remove embedded prefixes as appropriate. Add missing "\n" to pr_info in gre.c. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Mar, 2012 2 commits
-
-
Joe Perches authored
Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maciej Żenczykowski authored
The following 4 functions: move_addr_to_kernel move_addr_to_user verify_iovec verify_compat_iovec are always effectively called with a sockaddr_storage. Make this explicit by changing their signature. This removes a large number of casts from sockaddr_storage to sockaddr. Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Mar, 2012 7 commits
-
-
Li Wei authored
With commit d6ddef9e(IPv6: Fix not join all-router mcast group when forwarding set.) I check 'dev' after it's dereference that leads to a Smatch complaint: net/ipv6/addrconf.c:438 ipv6_add_dev() warn: variable dereferenced before check 'dev' (see line 432) net/ipv6/addrconf.c 431 /* protected by rtnl_lock */ 432 rcu_assign_pointer(dev->ip6_ptr, ndev); ^^^^^^^^^^^^ Old dereference. 433 434 /* Join all-node multicast group */ 435 ipv6_dev_mc_inc(dev, &in6addr_linklocal_allnodes); 436 437 /* Join all-router multicast group if forwarding is set */ 438 if (ndev->cnf.forwarding && dev && (dev->flags & IFF_MULTICAST)) ^^^ Remove the check to avoid the complaint as 'dev' can't be NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Richard Cochran authored
Some months ago, tglx asked me off list if I would maintain the PTP Hardware Clock code. Since then, the code has been fully merged, and I am actively looking after it. This patch makes it official. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Richard Cochran authored
This patch has been tested on a machine with the Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05). Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
drivers/net/irda/{ali-ircc, via-ircc, w83977af-ir}.c: ensure arguments to request_irq and free_irq are compatible Convert calls to free_irq so that the second argument is the same as the last argument of the corresponding call to request_irq. Without this property, free_irq does nothing. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
Convert calls to free_irq so that the second argument is the same as the last argument of the corresponding call to request_irq. Without this property, free_irq does nothing. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
sjur.brandeland@stericsson.com authored
Connection ID configured through RTNL must allow zero as connection id. If connection-id is not given when creating the interface, configure a loopback interface using ifindex as connection-id. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Tarnyagin authored
Kill faulty checks on flow-off leading to connection drop at race conditions. caif_socket checks for flow-on before transmitting and goes to sleep or return -EAGAIN upon flow stop. Remove faulty subsequent checks on flow-off leading to connection drop. Also fix memory leaks on some of the errors paths. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-