* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Fix crash in path_rec_completion()
  IPoIB: Fix hang in ipoib_flush_paths()
  IPoIB: Don't enable NAPI when it's already enabled
  RDMA/cxgb3: Fix deadlock in iw_cxgb3 (hang when configuring interface)
  IB/ehca: Remove reference to special QP in case of port activation failure
  IB/mlx4: Set umem field to NULL in mlx4_ib_alloc_fast_reg_mr()
  mlx4_core: Fix unused variable warning
  RDMA/nes: Mitigate compatibility issue regarding PCIe write credits
  RDMA/nes: Fix CQ allocation scheme for multicast receive queue apps
  RDMA/nes: Correct handling of PBL resources
  RDMA/nes: Reindent mis-indented spinlocks
  RDMA/cxgb3: Fix too-big reserved field zeroing in iwch_post_zb_read()
  IB/ipath: Fix RDMA write with immediate copy of last packet

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix IDT/STAC multiple HP detection
  ALSA: hda - Fix input pin initialization for STAC/IDT codecs
  ALSA: hda - Add missing analog-mux mixer creation for STAC9200

Don't do misalignment handling for userspace misalignment faults: just
generate an appropriate SIGBUS instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't handle the misaligned loading and storing of the SP register as in C code
that's most certainly a compiler bug.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Support misalignment handling for instructions that have kernel SP-based
address operands, including fixing those that include IMM8 or IMM16
displacements.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix misalignment handling for an address calculated from the sum of two
registers.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Correctly handle misalignment in MOV instructions with postinc-with-immediate
addressing mode operands.  In these, the immediate value is the increment to
be applied the address register, not the displacement to the address.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Perform misalignment fixups of the MOV_Lcc instructions (move postinc memory
to register and conditionally loop).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow misalignment fixup in interrupt handling in the MN10300 arch.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix misalignment handling of operands with register postincrement addressing.
The flag to indicate that postincrement is required should not be interpreted
as an specification of a value to be added to the address.

Also add BUGs to catch unimplemented parameter markings in the opcodes table.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Extract the displacement from an MN10300 instruction correctly in the
misalignment fixup handler.

The code should extract the displacement in LSB order, not MSB order.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add further misalignment fixup support to the MN10300 arch, notably for ABS32
and SP+disp addressing.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add configurable built-in testing for the MN10300 misalignment handler.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Clean up the MN10300 misalignment handler a little by:

 (1) Use ilog2() rather than doing implementing log2() locally.

 (2) Make format_tbl[] const and static.

 (3) Making the debugging prints more consistent.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: Fix pit memory leak if unable to allocate irq source id
  KVM: ia64: fix vmm_spin_{un}lock for !CONFIG_SMP
  KVM: VMX: Set IGMT bit in EPT entry
  KVM: Require the PCI subsystem
  x86: KVM guest: fix section mismatch warning in kvmclock.c
  KVM: ia64: Use guest signal mask when blocking
  KVM: MMU: increase per-vcpu rmap cache alloc size

The STACK_GROWSUP case of stack expansion was missing a test for 'prev',
which got removed by commit cb8f488c
("mmap.c: deinline a few functions") by mistake.

I found my original email in "sent" folder. The patch in that mail
does NOT remove !prev. That change had beed added by someone else.

Ok, I think we are not much interested in who did it, let's
fix it for good.

[ "It looks like this was caused by me fixing rejects.  That was the
  fancy include-lots-of-context-so-it-wont-apply patch." - akpm ]
Reported-and-bisected-by: Helge Deller <deller@gmx.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (47 commits)
  ACPI: pci_link: remove acpi_irq_balance_set() interface
  fujitsu-laptop: Add DMI callback for Lifebook S6420
  ACPI: EC: Don't do transaction from GPE handler in poll mode.
  ACPI: EC: lower interrupt storm treshold
  ACPICA: Use spinlock for acpi_{en|dis}able_gpe
  ACPI: EC: restart failed command
  ACPI: EC: wait for last write gpe
  ACPI: EC: make kernel messages more useful when GPE storm is detected
  ACPI: EC: revert msleep patch
  thinkpad_acpi: fingers off backlight if video.ko is serving this functionality
  sony-laptop: fingers off backlight if video.ko is serving this functionality
  msi-laptop: fingers off backlight if video.ko is serving this functionality
  fujitsu-laptop: fingers off backlight if video.ko is serving this functionality
  eeepc-laptop: fingers off backlight if video.ko is serving this functionality
  compal: fingers off backlight if video.ko is serving this functionality
  asus-acpi: fingers off backlight if video.ko is serving this functionality
  Acer-WMI: fingers off backlight if video.ko is serving this functionality
  ACPI video: if no ACPI backlight support, use vendor drivers
  ACPI: video: Ignore devices that aren't present in hardware
  Delete an unwanted return statement at evgpe.c
  ...

Fix a crash in path_rec_completion() during an SM up/down loop.  If
more than one path record request is issued, the first completion
releases path->done, allowing ipoib_flush_paths() to free the path,
and thus corrupting it for the second completion.

Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM
change events") added the field path->valid and changed the test "if
(!path)" to "if (!path || !path->valid)".  This change made it
possible for a path with an outstanding query to pass the test and
issue another query on the same path.  Having two queries on the same
path leads to a crash.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1325>.
Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

ipoib_flush_paths() can hang during an SM up/down loop: if
path_rec_start() fails (for instance, because there is no sm_ah), the
path is still added to the path list by neigh_add_path().  Then,
ipoib_flush_paths() will wait for path->done, but it will never
complete because the request was not issued at all.  Fix this by
completing path->done if issuing the query fails.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1329>.
Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

If a P_Key is not present when an interface is created, ipoib_open()
will return after doing napi_enable().  ipoib_open() will be called
again from ipoib_pkey_poll() when the P_Key appears, after NAPI has
already been enabled, and try to enable it again. This triggers a
BUG_ON() in napi_enable().

Fix this by moving the call to napi_enable() to after the test for
P_Key presence.
Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

When the iw_cxgb3 module's cxgb3_client "add" func gets called by the
cxgb3 module, the iwarp driver ends up calling the ethtool ops
get_drvinfo function in cxgb3 to get the fw version and other info.
Currently the iwarp driver grabs the rtnl lock around this down call
to serialize.  As of 2.6.27 or so, things changed such that the rtnl
lock is held around the call to the netdev driver open function.  Also
the cxgb3_client "add" function doesn't get called if the device is
down.

So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the
device, the iw_cxgb3 add func gets called with the rtnl_lock held.  If
you load cxgb3, ifconfig up the device, then load iw_cxgb3, the add
func gets called without the rtnl_lock held.  The former causes the
deadlock, the latter does not.

In addition, there are iw_cxgb3 sysfs handlers that also can call down
into cxgb3 to gather the fw and hw versions.  These can be called
concurrently on different processors and at any time.  Thus we need to
push this serialization down in the cxgb3 driver get_drvinfo func.

The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Due to the recent change for multiple HP as line-out switch, only
one of the multiple headphons (usually a wrong one) is toggled
and the other pins are still disabled.  This causes the silent output
problem on some Dell laptops.

Also, the hp_switch check is screwed up when a line-in or a mic-in
jack exists.  This is added as an additional output, but hp_switch
check doesn't take it into account.

This patch fixes these issues: simplify hp_switch check by using
the NID instead of bool, and clean up / fix the toggle of HP pins
in unsol event handler code.

Reference: Novell bnc#443267
	https://bugzilla.novell.com/show_bug.cgi?id=443267Signed-off-by: Takashi Iwai <tiwai@suse.de>

Conflicts:
	Documentation/kernel-parameters.txt
Signed-off-by: Len Brown <len.brown@intel.com>

This removes the acpi_irq_balance_set() interface from the PCI
interrupt link driver.

x86 used acpi_irq_balance_set() to tell the PCI interrupt link
driver to configure links to minimize IRQ sharing.  But the link
driver can easily figure out whether to turn on IRQ balancing
based on the IRQ model (PIC/IOAPIC/etc), so we can get rid of
that external interface.

It's better for the driver to figure this out at init-time.  If
we set it externally via the x86 code, the interface reduces
modularity, and we depend on the fact that acpi_process_madt()
happens before we process the kernel command line.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The Lifebook S6420 is the ICH9M-based follow-up to the S6410. The application panel
contains the following keys: lock, mobility center, eco, info.
Whilst key 4 might be more appropriate for help then key 2, I've done things the
S6410 way. I can confirm that backlight control is functional, and that the lock key
activates the Gnome screensaver as expected.
Signed-off-by: Tony Vroon <tony@linx.net>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>

If the initialization of a special QP (e.g. AQP1) fails due to a
software timeout, we have to remove the reference to that special QP
struct from the port struct to stop the driver from accessing the QP,
since it will be/has been destroyed by the caller, eg in this case
ib_mad.
Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Referencies: http://bugzilla.kernel.org/show_bug.cgi?id=12004Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>

http://bugzilla.kernel.org/show_bug.cgi?id=11892Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>

Disabling gpe might interfere with gpe detection/handling,
thus producing "interrupt not handled" errors.
Ironically, disabling of GPE from interrupt context is already
under spinlock, so only userspace needs to start using it.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>