- 05 Apr, 2017 20 commits
-
-
Mahesh Bandewar authored
Earlier patch c4adfc82 ("bonding: make speed, duplex setting consistent with link state") made an attempt to keep slave state consistent with speed and duplex settings. Unfortunately link-state transition is used to change the active link especially when used in conjunction with mii-mon. The above mentioned patch broke that logic. Also when speed and duplex settings for a link are updated during a link-event, the link-status should not be changed to invoke correct transition logic. This patch fixes this issue by moving the link-state update outside of the bond_update_speed_duplex() fn and to the places where this fn is called and update link-state selectively. Fixes: c4adfc82 ("bonding: make speed, duplex setting consistent with link state") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Reviewed-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrey Vagin authored
cb_running is reported in /proc/self/net/netlink and it is reported by the ss tool, when it gets information from the proc files. sock_diag is a new interface which is used instead of proc files, so it looks reasonable that this interface has to report no less information about sockets than proc files. We use these flags to dump and restore netlink sockets. Signed-off-by:
Andrei Vagin <avagin@openvz.org> Signed-off-by:
-
Dan Carpenter authored
We should be returning -ENOMEM if qed_mcp_cmd_add_elem() fails. The current code returns success. Fixes: 4ed1eea8 ("qed: Revise MFW command locking") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
-
Dan Carpenter authored
We accidentally left this dead code behind after commit 5952fde1 ("net: sched: choke: remove dead filter classify code"). Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
There is a cut and paste bug here so we accidentally clear the first few bytes of "resp" a second time instead clearing "ctx". Fixes: 50c0add5 ("liquidio: refactor interrupt moderation code") Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
Joao Pinto authored
In hardware configurations where multiple queues are active, the rx queue needs to be mapped into a dma channel, even if a single rx queue is used. Signed-off-by:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
-
Joe Perches authored
Add all the currently available SPEED_<foo> strings. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Updates for net-next. Main changes are to add WoL and selftest features, optimize XDP_TX by using short BDs, and to cap the usage of MSIX. ==================== Signed-off-by: -
Michael Chan authored
The current code enables up to the maximum MSIX vectors in the PCIE config space without considering the max completion rings available. An MSIX vector is only useful when it has an associated completion ring, so it is better to cap it. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
No offload is performed on the XDP_TX ring so we can use the short TX BDs. This has the effect of doubling the size of the XDP TX ring so that it now matches the size of the rx ring by default. Signed-off-by:
-
Michael Chan authored
Signed-off-by:
-
Michael Chan authored
It is necessary to disable autoneg before enabling PHY loopback, otherwise link won't come up. Signed-off-by:
-
Michael Chan authored
The mac loopback self test operates in polling mode. To support that, we need to add functions to open and close the NIC half way. The half open mode allows the rings to operate without IRQ and NAPI. We use the XDP transmit function to send the loopback packet. Signed-off-by:
-
Michael Chan authored
Add the basic infrastructure and only firmware tests initially. Signed-off-by:
-
Michael Chan authored
Add suspend/resume callbacks using the newer dev_pm_ops method. Signed-off-by:
-
Michael Chan authored
And add functions to set and free magic packet filter. Signed-off-by:
-
Michael Chan authored
Signed-off-by:
-
Michael Chan authored
Add pci shutdown method to put device in the proper WoL and power state. Signed-off-by:
-
Michael Chan authored
Add code to driver probe function to check if the device is WoL capable and if Magic packet WoL filter is currently set. Signed-off-by:
-
Michael Chan authored
Features added include WoL and selftest. Signed-off-by:
Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by:
-
- 04 Apr, 2017 14 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2017-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.11 iwlwifi * an RCU fix * a fix for a potential out-of-bounds access crash * a fix for IBSS which has been broken since DQA was enabled rtlwifi * fix scheduling while atomic regression brcmfmac * fix use-after-free bug found by KASAN ==================== Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== qed: QM & ILT changes This series introduces several changes and improvements to existing queue manager and ILT configurations done during initialization. Notice some of the patches are actually future fixes, I.e., bugs that can't be triggered with exisiting driver but are needed for some future functionality. Patch #1 refactors the configuration of the hardware's queue manager, which is quite messy today. This contains most of the bulk [code-wise] in the series. Patch #2, #3 fix Timers related ILT configurations that are yet to affect qed in existing scenarios. Patch #4 reduces needless ILT lines wasted for RoCE configurations. Patch #5 allows RoCE partitions to manage with less memory regions [important, e.g., for Multi-function parititions with RoCE support]. ==================== Signed-off-by: -
Ram Amrani authored
It's possible some configurations would prevent driver from utilizing all the Memory Regions due to a lack of ILT lines. In such a case, calculate how many memory regions would have to be dropped due to limit, and manage without those. Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Mintz, Yuval authored
As RoCE doesn't need to use the SRC, allocating ILT memory on behalf of RoCE is wasting available ILT lines. Signed-off-by:
-
Mintz, Yuval authored
As of today there's no protocol supported that requires support from the TM hardware block and enables SRIOV, but we should still correct the calculation to reflect the lines required for such future VFs instead of changing the PF's own lines. Signed-off-by:
-
Michal Kalderon authored
When configuring the HW timers block we should set the number of CIDs up until the last CID that require timers, instead of only those CIDs whose protocol needs timers support. Today, the protocols that require HW timers' support have their CIDs before any other protocol, but that would change in future [when we add iWARP support]. Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Ariel Elior authored
Refactor and clean up the queue manager initialization logic. Also, this adds support for RoC low latency queues, which later would be used for improving RoCE latency in high throughput scenarios. Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
-
Greg Ungerer authored
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by:
Greg Ungerer <gerg@linux-m68k.org> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Alexey Dobriyan authored
Number of sockets is limited by 16-bit, so 64-bit allocation will never happen. 16-bit ops are the worst code density-wise on x86_64 because of additional prefix (66). Space savings: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3) function old new delta reuseport_add_sock 539 536 -3 Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
Make ->hash_count, ->low_watermark and ->high_watermark unsigned int and propagate unsignedness to other variables. This change doesn't change code generation because these fields aren't used in 64-bit contexts but make it anyway: these fields can't be negative numbers. Signed-off-by:
-
Alexey Dobriyan authored
Hash size can't negative so "unsigned int" is logically correct. Propagate "unsigned int" to loop counters. Space savings: add/remove: 0/0 grow/shrink: 2/2 up/down: 6/-18 (-12) function old new delta flow_cache_flush_tasklet 362 365 +3 __flow_cache_shrink 333 336 +3 flow_cache_cpu_up_prep 178 171 -7 flow_cache_lookup 1159 1148 -11 Signed-off-by:
-
Alexey Dobriyan authored
Flow keys aren't 4GB+ numbers so 64-bit arithmetic is excessive. Space savings (I'm not sure what CSWTCH is): add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-48 (-48) function old new delta flow_cache_lookup 1163 1159 -4 CSWTCH 75997 75953 -44 Signed-off-by:
-
Andrew Lunn authored
Breaking the include loop netdevice.h, dsa.h, devlink.h broke this driver, it depends on includes brought in by these headers. Adding linux/of.h fixes it. Fixes: ed0e39e97d34 ("net: break include loop netdevice.h, dsa.h, devlink.h") Signed-off-by:Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Vincent Bernat authored
When an incoming frame is tagged or when GRO is disabled, the skb handled to vxlan_xmit() doesn't contain a valid transport header offset. This makes ND proxying fail. We combine two changes: replace use of skb_transport_offset() and ensure the necessary amount of skb is linear just before using it: - In vxlan_xmit(), when determining if we have an ICMPv6 neighbor discovery packet, just check if it is an ICMPv6 packet and rely on neigh_reduce() to do more checks if this is the case. The use of pskb_may_pull() is replaced by skb_header_pointer() for just the IPv6 header. - In neigh_reduce(), add pskb_may_pull() for IPv6 header and neighbor discovery message since this was removed from vxlan_xmit(). Replace skb_transport_header() with ipv6_hdr() + 1. - In vxlan_na_create(), replace first skb_transport_offset() with ipv6_hdr() + 1 and second with skb_network_offset() + sizeof(struct ipv6hdr). Additionally, ensure we pskb_may_pull() the whole skb as we need it to iterate over the options. Signed-off-by:
Vincent Bernat <vincent@bernat.im> Signed-off-by:
-
- 03 Apr, 2017 6 commits
-
-
Xin Long authored
Before when implementing sctp prsctp, SCTP_PR_STREAM_STATUS wasn't added, as it needs to save abandoned_(un)sent for every stream. After sctp stream reconf is added in sctp, assoc has structure sctp_stream_out to save per stream info. This patch is to add SCTP_PR_STREAM_STATUS by putting the prsctp per stream statistics into sctp_stream_out. v1->v2: fix an indent issue. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== net: hns: Misc. HNS Bug Fixes & Code Improvements This patch set introduces various HNS bug fixes, optimizations and code improvements. ==================== Signed-off-by: -
Salil authored
This patch fixes some checkpatch.pl script caught errors and warnings during the compilation time. Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
lipeng authored
There is a bug on Hip06 that tx ring interrupts packets count will be clear when drivers send data to tx ring, so that the tx packets count will never upgrade to packets line, and cause the interrupts engendered was delayed. Sometimes, it will cause sending performance lower than expected. To fix this bug, we set tx ring interrupts packets line to 1 forever, to avoid count clear. And set the gap time to 20us, to solve the problem that too many interrupts engendered when packets line is 1. This patch could advance the send performance on ARM from 6.6G to 9.37G when an iperf send thread on ARM and an iperf send thread on X86 for XGE. Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
-
Kejian Yan authored
HNS needs SMB Buffers to store at least two packets after sending pause frame because of the link delay. The MTU of HNS is 9728. As the processor user manual described, the SBM buffer threshold should be modified. Reported-by:
Ping Zhang <zhangping5@huawei.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
-
Kejian Yan authored
We need to free all ppe submodule if it fails to initialize ppe by any fault, so this patch will free all ppe resource before hns_ppe_init() returns exception situation Reported-by:
JinchuanTian <tianjinchuan1@huawei.com> Signed-off-by:
-
