- 29 Sep, 2020 11 commits
-
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: miscellaneous cleanups This series contains some minor cleanups I've been meaning to get around to for a while. The first few remove the definitions of some currently-unused symbols. Several fix some warnings that are reported when the build is done with "W=2". All are simple and have no effect on the operation of the code. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Alex Elder authored
In ipa_uc_response_hdlr() a comment uses the wrong function name when it describes where a clock reference is taken. Fix this. Also fix the comment in ipa_uc_response_hdlr() to correctly refer to ipa_uc_setup(), which is where the clock reference described here is taken. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
When "W=2" is supplied to the build command, we get a warning about shadowing a global declaration (of a typedef) for a variable defined in ipa_probe(). Rename the variable to get rid of the warning. Signed-off-by:
-
Alex Elder authored
Fix two spots where a variable "channel_id" is unnecessarily redefined inside loops in "gsi.c". This is warned about if "W=2" is added to the build command. Note that this problem is harmless, so there's no need to backport it as a bugfix. Remove a comment in gsi_init() about waking the system; the GSI interrupt does not wake the system any more. Signed-off-by:
-
Alex Elder authored
The GSI general interrupt is managed by three registers: enable; status; and clear. The three registers have same set of field bits at the same locations. Use a common set of field masks for all three registers to avoid duplication. Signed-off-by:
-
Alex Elder authored
The GSI global interrupt is managed by three registers: enable; status; and clear. The three registers have same set of field bits at the same locations. Use a common set of field masks for all three registers to avoid duplication. Signed-off-by:
-
Alex Elder authored
The GSI interrupt type register and interrupt type mask register have the same field bits at the same locations. Use a common set of field masks for both registers rather than essentially duplicating them. The only place the interrupt mask register uses any of these is in gsi_irq_enable(). Signed-off-by:
-
Alex Elder authored
Most of the field masks used for fields in a status structure are unused. Remove their definitions; we can add them back again when we actually use them to handle arriving status messages. These are warned about if "W=2" is added to the build command. Signed-off-by:
-
Alex Elder authored
Only the deaggregation status exception type is ever actually used. If any other status exception type is reported we basically ignore it, and consume the packet. Remove the unused definitions of status exception type symbols; they can be added back when we actually handle them. Separately, two consecutive if statements test the same condition near the top of ipa_endpoint_suspend_one(). Instead, use a single test with a block that combines the previously-separate lines of code. Signed-off-by:
-
Alex Elder authored
Three status opcodes are not currently supported. Symbols representing their numeric values are defined but never used. Remove those unused definitions; they can be defined again when they actually get used. Signed-off-by:
-
Alex Elder authored
In "gsi_trans.c", the field mask TRE_FLAGS_IEOB_FMASK is defined but never used. Although there's no harm in defining this, remove it for now and redefine it at some future date if it becomes needed. This is warned about if "W=2" is added to the build command. Signed-off-by:
-
- 28 Sep, 2020 29 commits
-
-
David S. Miller authored
Lijun Pan says: ==================== ibmvnic: refactor some send/handle functions This patch series rename and factor some send crq request functions. The new naming aligns better with handle* functions such that it make the code easier to read and search by new contributors. ==================== Signed-off-by: -
Lijun Pan authored
Factor send_control_ip_offload out of handle_query_ip_offload_rsp. Signed-off-by:
Lijun Pan <ljp@linux.ibm.com> Signed-off-by:
-
Lijun Pan authored
Factor send_query_ip_offload out of handle_request_cap_rsp to pair with handle_query_ip_offload_rsp. Signed-off-by:
-
Lijun Pan authored
The new name send_query_map pairs with handle_query_map_rsp. Signed-off-by:
-
Lijun Pan authored
The new name send_request_cap pairs with handle_request_cap_rsp. Signed-off-by:
-
Lijun Pan authored
The new name send_query_cap pairs with handle_query_cap_rsp. Signed-off-by:
-
Lijun Pan authored
Set up the speed according to crq->query_phys_parms.rsp.speed. Fix IBMVNIC_10GBPS typo. Fixes: f8d6ae0d ("ibmvnic: Report actual backing device speed and duplex values") Signed-off-by:
-
Rikard Falkeborn authored
The only usage of atmtcp_v_dev_ops is to pass its address to atm_dev_register() which takes a pointer to const, and comparing its address to another address, which does not modify it. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by:
-
Davide Caratti authored
similarly to what has been done with commit 9d149045 ("geneve: change from tx_error to tx_dropped on missing metadata"), avoid reporting errors to userspace in case the kernel doesn't find any tunnel information for a skb that is going to be transmitted: an increase of tx_dropped is enough. tested with the following script: # for t in ip6gre ip6gretap ip6erspan; do > ip link add dev gre6-test0 type $t external > ip address add dev gre6-test0 2001:db8::1/64 > ip link set dev gre6-test0 up > sleep 30 > ip -s -j link show dev gre6-test0 | jq \ > '.[0].stats64.tx | {"errors": .errors, "dropped": .dropped}' > ip link del dev gre6-test0 > done Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
David S. Miller authored
Karsten Graul says: ==================== net/smc: introduce SMC-Dv2 support SMC-Dv2 support (see https://www.ibm.com/support/pages/node/6326337) provides multi-subnet support for SMC-D, eliminating the current same-subnet restriction. The new version detects if any of the virtual ISM devices are on the same system and can therefore be used for an SMC-Dv2 connection. Furthermore, SMC-Dv2 eliminates the need for PNET IDs on s390. ==================== Signed-off-by:
-
Ursula Braun authored
This patch covers the small SMCD version 2 changes for CLC decline. Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Ursula Braun authored
SMC Version 2 defines a first contact extension for CLC accept and CLC confirm. This patch covers sending and receiving of the CLC first contact extension. Signed-off-by:
-
Ursula Braun authored
The new format of SMCD V2 CLC accept and confirm is introduced, and building and checking of SMCD V2 CLC accepts / confirms is adapted accordingly. Signed-off-by:
-
Ursula Braun authored
SMCD Version 2 allows to propose up to 8 additional ISM devices offered to the peer as candidates for SMCD communication. This patch covers the server side, i.e. selection of an ISM device matching one of the proposed ISM devices, that will be used for CLC accept Signed-off-by:
-
Ursula Braun authored
The new format of an SMCD V2 CLC proposal is introduced, and building and checking of SMCD V2 CLC proposals is adapted accordingly. Signed-off-by:
-
Ursula Braun authored
SMCD Version 2 allows to propose up to 8 additional ISM devices offered to the peer as candidates for SMCD communication. This patch covers determination of the ISM devices to be proposed. ISM devices without PNETID are preferred, since ISM devices with PNETID are a V1 leftover and will disappear over the time. Signed-off-by:
-
Ursula Braun authored
SMCD version 2 allows usage of ISM devices with hardware PNETID only, if an Ethernet net_device exists with the same hardware PNETID. This requires to maintain a list of pnetids belonging to Ethernet net_devices, which is covered by this patch. Signed-off-by:
-
Ursula Braun authored
With SMCD version 2 the CHIDs of ISM devices are needed for the CLC handshake. This patch provides the new callback to retrieve the CHID of an ISM device. Signed-off-by:
-
Ursula Braun authored
SMCD version 2 defines a System Enterprise ID (short SEID). This patch contains the SEID creation and adds the callback to retrieve the created SEID. Signed-off-by:
-
Ursula Braun authored
SMCD Version 2 allows proposing of up to 8 ISM devices in addition to the native ISM device of SMCD Version 1. This patch prepares the struct smc_init_info to deal with these additional 8 ISM devices. Signed-off-by:
-
Ursula Braun authored
When sending CLC confirm and CLC accept, separate the trailing part of the message from the initial part (to be prepared for future first contact extension). Signed-off-by:
-
Ursula Braun authored
This patch provides better separation of device determinations in function smc_listen_work(). No functional change. Signed-off-by:
-
Ursula Braun authored
SMCD version 2 defines 2 more bits in the CLC header to specify version 2 types. This patch prepares better naming of the CLC header fields. No functional change. Signed-off-by:
-
Karsten Graul authored
Use the existing symbol _S instead of SMC_ASCII_BLANK, and introduce a helper to check if a pnetid is set. No functional change. Signed-off-by:
-
Wang Qing authored
Use kobj_to_dev() instead of container_of(). Signed-off-by:
Wang Qing <wangqing@vivo.com> Signed-off-by:
-
Lorenzo Bianconi authored
Try to recycle the xdp tx buffer into the in-irq page_pool cache if mvneta_txq_bufs_free is executed in the NAPI context for XDP_TX use case Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
https://github.com/anguy11/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2020-09-28 This series contains updates to igb, igc, and e1000e drivers. Sven Auhagen adds XDP support for igb. Gal Hammer allows for 82576 to display part number string correctly for igb. Sasha adds device IDs for i221 and i226 parts. Exposes LPI counters and removes unused fields in structures for igc. He also adds Meteor Lake support for e1000e. For igc, Andre renames IGC_TSYNCTXCTL_VALID to IGC_TSYNCTXCTL_TXTT_0 to match the datasheet and adds a warning if it's not set when expected. Removes the PTP Tx timestamp check in igc_ptp_tx_work() as it's already checked in the watchdog_task. Cleans up some code by removing invalid error bits, renaming a bit to match datasheet naming, and removing a, now unneeded, macro. Vinicius makes changes for igc PTP: removes calling SYSTIMR to latch timer value, stores PTP time before a reset, and rejects schedules with times in the future. v2: Remove 'inline' from igb_xdp_tx_queue_mapping() and igb_rx_offset() for patch 1 ==================== Signed-off-by: -
Sasha Neftin authored
Add devices IDs for the next LOM generations that will be available on the next Intel Client platform (Meteor Lake) This patch provides the initial support for these devices Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Sasha Neftin authored
flash_bank_size and flash_base_addr field not in use and can be removed from a nvm_info structure Signed-off-by:
-
