- 20 Nov, 2019 40 commits
-
-
Geert Uytterhoeven authored
[ Upstream commit 7a590fe3 ] usb2_phy1 accidentally uses the same clock/reset as usb2_phy0. Fixes: b5857630 ("arm64: dts: renesas: r8a77965: add usb2_phy nodes") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit 99584d93 ] Should be "renesas,usbhs-r8a77965", not "renesas,usbhs-r8a7796". Fixes: a06e8af8 ("arm64: dts: renesas: r8a77965: add HS-USB node") Signed-off-by:
-
Magnus Damm authored
[ Upstream commit 4d76ad7d ] For R-Car M3-N hook up SYS-DMAC0, SYS-DMAC1 and SYS-DMAC2 to IPMMU-DS0 and IPMMU-DS1 in same way as for R-Car M3-W. This follows the R-Car Gen3 Rev.1.00 (April 2018) datasheet. Signed-off-by:
Magnus Damm <damm+renesas@opensource.se> Signed-off-by:
-
Kieran Bingham authored
[ Upstream commit e3da41a6 ] Ensure that the ADV748x device addresses do not conflict, and group them together (visually in i2cdetect) Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 7064f376 ] The interrupt handler has to be acquired after the other resource initialization when allocated with IRQF_SHARED. Otherwise it's triggered before the resource gets ready, and may lead to unpleasant behavior. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Neil Armstrong authored
[ Upstream commit eaf8f57c ] Use the correct compatible for the AXG ethernet mac node. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit b7eb0e26 ] There is actually several different libretech board with the CC suffix so the model name is not appropriate here. Update to something more specific Reported-by:
Da Xue <da@lessconfused.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit 00eb2243 ] The phy supported speed is being used to determine if the MAC should be configured to 100 or 1G. The masking logic is broken. Instead, look at 1G supported speeds to enable 1G MAC support. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 1ccbeeb8 ] The VIDEO_GET_EVENT and VIDEO_STILLPICTURE was added back in 2005 but it never worked because the command number is wrong. Using the right command number means we have a better chance of them actually doing the right thing, though clearly nobody has ever tried it successfully. I noticed these while auditing the remaining users of compat_time_t for y2038 bugs. This one is fine in that regard, it just never did anything. Fixes: 6e87abd0 ("[DVB]: Add compat ioctl handling.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Lao Wei authored
[ Upstream commit eac7230f ] Motion eye video4linux driver for Sony Vaio PictureBook desn't validate user-controlled parameter 'vma->vm_pgoff', a malicious process might access all of kernel memory from user space by trying pass different arbitrary address. Discussion: http://www.openwall.com/lists/oss-security/2018/07/06/1Signed-off-by:
Lao Wei <zrlw@qq.com> Signed-off-by:
-
Mark Brown authored
[ Upstream commit d9b84a15 ] Include asm/io.h directly so we've got a definition of pci_iomap(), the current set of includes do this implicitly on most architectures but not on SH. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 27582f0e ] With recent dtc and W=1: Warning (graph_port): video-receiver@70/port@10: graph node unit address error, expected "a" Warning (graph_port): video-receiver@70/port@11: graph node unit address error, expected "b" Unit addresses are always hexadecimal (without prefix), while the bases of reg property values depend on their prefixes. Fixes: e6959517 ("media: adv748x: Add adv7481, adv7482 bindings") Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit ca6ac25c ] nvmem_device_get() should return ERR_PTR() on error or valid pointer on success, but one of the code path seems to return NULL, so fix it. Reported-by:
Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Michael Kelley authored
[ Upstream commit f25a7ece ] If hv_synic_alloc() errors out, the state of the per-cpu context for some CPUs is unknown since the zero'ing is done as each CPU is iterated over. In such case, hv_synic_cleanup() may try to free memory based on uninitialized values. Fix this by zero'ing the per-cpu context for all CPUs before doing any memory allocations that might fail. Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Yana Esina authored
[ Upstream commit 3ee5c887 ] This patch fixes the upload function, which worked incorrectly with some chips. Signed-off-by:
Yana Esina <yana.esina@aquantia.com> Signed-off-by:
Nikita Danilov <nikita.danilov@aquantia.com> Tested-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit cbdd96f5 ] Instead of calling BUG_ON(), if we find a kprobe in use on free kprobe list, just remove it from the list and keep it on kprobe hash list as same as other in-use kprobes. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/153666126882.21306.10738207224288507996.stgit@devboxSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Deepak Ukey authored
[ Upstream commit 72349b62 ] When the firmware is not responding, execution of kexec boot causes a system hang. When firmware assertion happened, driver get notified with interrupt vector updated in MPI configuration table. Then, the driver will read scratchpad register and set controller_fatal_error flag to true. Signed-off-by:
Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by:
Viswas G <Viswas.G@microchip.com> Acked-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Deepak Ukey authored
[ Upstream commit 76cb25b0 ] For the function dma_unmap_sg(), the <nents> parameter should be number of elements in the scatter list prior to the mapping, not after the mapping. Signed-off-by:
-
Oleksij Rempel authored
[ Upstream commit 8148d213 ] One of the Freescale recommended sequences for power off with external PMIC is the following: ... 3. SoC is programming PMIC for power off when standby is asserted. 4. In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies. See: http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf page 5083 This patch implements step 4. of this sequence. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
George Kennedy authored
[ Upstream commit 288315e9 ] sym_int_sir() in sym_hipd.c does not check the command pointer for NULL before using it in debug message prints. Suggested-by:
Matthew Wilcox <matthew.wilcox@oracle.com> Signed-off-by:
George Kennedy <george.kennedy@oracle.com> Reviewed-by:
Mark Kanda <mark.kanda@oracle.com> Acked-by:
-
James Smart authored
[ Upstream commit 2879265f ] Message 6408 is displayed for each entry in an array, but the cpu and queue numbers were incorrect for the entry. Message 6001 includes an extraneous character. Resolve both issues Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
James Smart authored
[ Upstream commit aad59d5d ] During attachment, the driver writes the EQ doorbell to disable potential interrupts from an EQ. The current EQ doorbell format used for clearing the interrupt is incorrect and uses an if_type=2 format, making the operation act on the wrong EQ. Correct the code to use the proper if_type=6 EQ doorbell format. Signed-off-by:
-
James Smart authored
[ Upstream commit 01a8aed6 ] Driver only sends NVME PRLI to a device that also supports FCP. This resuls in remote ports that don't have fc_remote_ports created for them. The driver is clearing the nlp_fc4_type for a ndlp at the wrong time. Fix by moving the nlp_fc4_type clearing to the discovery engine in the DEVICE_RECOVERY state. Also ensure that rport registration is done for all nlp_fc4_types. Signed-off-by:
-
Quinn Tran authored
[ Upstream commit f3a03ee1 ] Current code relies on switch to provide a unique combination of WWPN + NPORTID to tract an FC port. This patch tries to detect a case where switch data base can get corrupted where multiple WWPNs can have the same Nport ID. The 1st Nport ID on the list will be kept while the duplicate Nport ID will be discarded. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Quinn Tran authored
[ Upstream commit 527b8ae3 ] When FW rejects a command due to "entry_status" error (malform IOCB), the srb resource needs to be returned back for cleanup. The filter to catch this is in the wrong location. Signed-off-by:
-
Quinn Tran authored
[ Upstream commit 5d74c87a ] Clear port speed value on chip reset. Signed-off-by:
-
Sawan Chandak authored
[ Upstream commit f99c5d29 ] During adapter shutdown process check for register disconnect before proceeding to call PCI functions. Signed-off-by:
Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by:
-
Quinn Tran authored
[ Upstream commit 8bccfe0d ] Abort IOCB request can take up to 40s or 2 ABTS timeout. We will wait for ABTS response for 20s. On a timeout, second ABTS can go out with another 20s timeout. On 2nd ABTS timeout FW will automatically do Logout. Signed-off-by:
-
Quinn Tran authored
[ Upstream commit 1073daa4 ] Move ATIO queue processing out of hardware_lock to prevent deadlock. Fixes: 3bb67df5 ("qla2xxx: Check for online flag instead of active reset when transmitting responses") Signed-off-by:
-
Quinn Tran authored
[ Upstream commit aa9e6d7b ] When driver receive PLOGI/PRLI from FW, the WWPN value will be provided. If it is not, then driver will terminate it. The WWPN allows driver to locate the session or create a new session. Signed-off-by:
-
Quinn Tran authored
[ Upstream commit 93eca613 ] For target mode, any chip reset triggered before target mode is enabled will be held off until user is ready to enable. This prevents the chip from starting or running before it is intended. Signed-off-by:
-
Quinn Tran authored
[ Upstream commit 8d9bf0a9 ] When switch responds with error for Get Port Speed Command (GPSC), driver should not proceed with telling FW about the speed of the remote port. Signed-off-by:
-
Quinn Tran authored
[ Upstream commit 49cecca7 ] On Abort of initiator scsi command, the abort needs to follow the same qpair as the the scsi command to prevent out of order processing. Signed-off-by:
-
Wang Shilong authored
[ Upstream commit c8e92757 ] Currently, project quota could be changed by fssetxattr ioctl, and existed permission check inode_owner_or_capable() is obviously not enough, just think that common users could change project id of file, that could make users to break project quota easily. This patch try to follow same regular of xfs project quota: "Project Quota ID state is only allowed to change from within the init namespace. Enforce that restriction only if we are trying to change the quota ID state. Everything else is allowed in user namespaces." Besides that, check and set project id'state should be an atomic operation, protect whole operation with inode lock. Signed-off-by:
Wang Shilong <wshilong@ddn.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Chao Yu authored
[ Upstream commit 4a70e255 ] In fill_super -> init_percpu_info, we should destroy percpu counter in error path, otherwise memory allcoated for percpu counter will leak. Signed-off-by:
-
Chao Yu authored
[ Upstream commit 0b2103e8 ] It needs to release memory allocated for sbi->write_io in error path, otherwise, it will cause memory leak. Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 4a63c1ff ] For userspace to tell the difference between an random signal and an exception, the exception must include siginfo information. Using SEND_SIG_FORCED for SIGSEGV is thus wrong, and it will result in userspace seeing si_code == SI_USER (like a random signal) instead of si_code == SI_KERNEL or a more specific si_code as all exceptions deliver. Therefore replace force_sig_info(SIGSEGV, SEND_SIG_FORCE, current) with force_sig(SIG_SEGV, current) which gets this right and is shorter and easier to type. Fixes: 791eca10 ("uretprobes/x86: Hijack return address") Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 55a3235f ] For userspace to tell the difference between a random signal and an exception, the exception must include siginfo information. Using SEND_SIG_FORCED for SIGILL is thus wrong, and it will result in userspace seeing si_code == SI_USER (like a random signal) instead of si_code == SI_KERNEL or a more specific si_code as all exceptions deliver. Therefore replace force_sig_info(SIGILL, SEND_SIG_FORCE, current) with force_sig(SIG_ILL, current) which gets this right and is shorter and easier to type. Fixes: 014940ba ("uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails") Fixes: 0b5256c7 ("uprobes: Send SIGILL if handle_trampoline() fails") Reviewed-by:
-
Eric W. Biederman authored
[ Upstream commit 86989c41 ] If the first process started (aka /sbin/init) receives a SIGKILL it will panic the system if it is delivered. Making the system unusable and undebugable. It isn't much better if the first process started receives SIGSTOP. So always ignore SIGSTOP and SIGKILL sent to init. This is done in a separate clause in sig_task_ignored as force_sig_info can clear SIG_UNKILLABLE and this protection should work even then. Reviewed-by:
-
Michael J. Ruhl authored
[ Upstream commit 2bf4b33f ] If the set_txreq_header_agh() function returns an error, the exit path is chosen. In this path, the code fails to set the return value. This will cause the caller to not realize an error has occurred. Set the return value correctly in the error path. Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
