MPH_INFORMATION provides full D- and B-Channel status overview

- new layer1 primitive: MPF_INFORMATON_REQ
- layer1 replies with MPH_INFORMATION_IND containing
   - dch->[state,Flags,nrbchan]
   - bch[]->[protocol,Flags]
- hardware driver should send MPH_INFORMATION_IND
  on all ph state changes and BChannel state changes to MISDN_ID_ANY
Signed-off-by: Martin Bachem <m.bachem@gmx.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Fix kernel crash when doing hardware conference with more than two members.
Removed DTMF threshold notice when debugging is disabled.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

create_l1() was missed when changing mode to TE.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Add missed table.
Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Create /sys/class/mISDN and implement functions to handle
device renames.
Signed-Off-By: Matthias Urlichs <matthias@urlichs.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Add missing release function of ec-devices. Each device require a relase
function now. All destruction (memory and list entry) must be done within
the given release function of device, rather than after unregistering device.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

     - Poll-timer can now be set from 8 to 256 samples, depending on your kernel.
     - If default or 128 is used, the normal controller's clock is used as before.
       Usage: modprobe hfcpci poll=XXX
     - Added some debug code for dsp buffer size. (CMX_DELAY_DEBUG)
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

minor typo fix
compiler warning fix
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Correct busy device detection.
This fix belongs to last commit.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

 Added GETPEER operation.
 Socket now checks if device is already busy at a differen mode.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

- new layer1 protocols for UP0 bus
- helper #defines to test for TE/NT/S0/E1/UP0
Signed-off-by: Martin Bachem <m.bachem@gmx.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Fix false irq detection on disabled irqs.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Add ISDN sample clock API to mISDN core (new file clock.c)
hfcmulti and mISDNdsp use clock API.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Return error on D-channel access with E-channel data requested
Signed-off-by: Martin Bachem <m.bachem@gmx.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

New prim PH_DATA_E_IND.

 - all E-ch frames are indicated by recv_Echannel(), which pushes E-Channel
   frames into dch's rqueue
 - if dchannel is opened with channel nr 0, no E-Channel logging
   is requested
 - if dchannel is opened with channel nr 1, E-Channel logging
   is requested. if layer1 does not support that, -EINVAL
   in return is appropriate
Signed-off-by: Martin Bachem <m.bachem@gmx.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Use protocol to detect D-channel not the channel number 0
Signed-off-by: Martin Bachem <m.bachem@gmx.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Fix more indexing bugs  when checking free timeslots.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Add usefull info to debug output.
Signed-off-by: Peter Schlaile <root@asterisk.schlaile.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Fix HDLC DSP transmit (DL_DATA frames were bounced back upwards instead of
being sent down as PH_DATA frames)

Thanks to Andreas Eversberg for the fix!
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Peter Schlaile <root@asterisk.schlaile.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

struct device already has a 'name' member, use it.
Signed-off-by: Matthias Urlichs <matthias@urlichs.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

To get persistent device names with hotplug we need to rename devices
sometime.
Signed-off-by: Matthias Urlichs <matthias@urlichs.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

This is not needed.
Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

If received frames are not handled in time, purge them.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Add a new debug bit for clock problems.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

This prevents underrun of fifo when filled and in case of an underrun it
prevents subsequent underruns due to jitter.
Improve dsp, so buffers are kept filled with a certain delay, so moderate
jitter will not cause underrun all the time -> the audio quality is highly
improved. tones are not interrupted by gaps anymore, except when CPU is
stalling or in high load.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <kkeil@suse.de>

Remove references to external zaptel modules and some
cosmetic cleanups.
Signed-off-by: Karsten Keil <kkeil@suse.de>

* git://git.infradead.org/mtd-2.6: (67 commits)
  [MTD] [MAPS] Fix printk format warning in nettel.c
  [MTD] [NAND] add cmdline parsing (mtdparts=) support to cafe_nand
  [MTD] CFI: remove major/minor version check for command set 0x0002
  [MTD] [NAND] ndfc driver
  [MTD] [TESTS] Fix some size_t printk format warnings
  [MTD] LPDDR Makefile and KConfig
  [MTD] LPDDR extended physmap driver to support LPDDR flash
  [MTD] LPDDR added new pfow_base parameter
  [MTD] LPDDR Command set driver
  [MTD] LPDDR PFOW definition
  [MTD] LPDDR QINFO records definitions
  [MTD] LPDDR qinfo probing.
  [MTD] [NAND] pxa3xx: convert from ns to clock ticks more accurately
  [MTD] [NAND] pxa3xx: fix non-page-aligned reads
  [MTD] [NAND] fix nandsim sched.h references
  [MTD] [NAND] alauda: use USB API functions rather than constants
  [MTD] struct device - replace bus_id with dev_name(), dev_set_name()
  [MTD] fix m25p80 64-bit divisions
  [MTD] fix dataflash 64-bit divisions
  [MTD] [NAND] Set the fsl elbc ECCM according the settings in bootloader.
  ...

Fixed up trivial debug conflicts in drivers/mtd/devices/{m25p80.c,mtd_dataflash.c}

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (94 commits)
  ACPICA: hide private headers
  ACPICA: create acpica/ directory
  ACPI: fix build warning
  ACPI : Use RSDT instead of XSDT by adding boot option of "acpi=rsdt"
  ACPI: Avoid array address overflow when _CST MWAIT hint bits are set
  fujitsu-laptop: Simplify SBLL/SBL2 backlight handling
  fujitsu-laptop: Add BL power, LED control and radio state information
  ACPICA: delete utcache.c
  ACPICA: delete acdisasm.h
  ACPICA: Update version to 20081204.
  ACPICA: FADT: Update error msgs for consistency
  ACPICA: FADT: set acpi_gbl_use_default_register_widths to TRUE by default
  ACPICA: FADT parsing changes and fixes
  ACPICA: Add ACPI_MUTEX_TYPE configuration option
  ACPICA: Fixes for various ACPI data tables
  ACPICA: Restructure includes into public/private
  ACPI: remove private acpica headers from driver files
  ACPI: reboot.c: use new acpi_reset interface
  ACPICA: New: acpi_reset interface - write to reset register
  ACPICA: Move all public H/W interfaces to new hwxface
  ...

Convert WARN_ON() on command issue/completion paths to WARN_ON_ONCE()
so that libata doesn't spam the machine even when one of those
conditions triggers repeatedly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The newly allocated creds in prepare_kernel_cred() must be initialised
before get_uid() and get_group_info() can access them.  They should be
copied from the old credentials.
Reported-by: Steve Dickson <steved@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Missing put_cred() in the error handling path of prepare_kernel_cred().
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: export length of os_hpmc vector
  parisc: fix kernel crash (protection id trap) when compiling ruby1.9
  parisc: Use DEFINE_SPINLOCK
  parisc: add uevent helper for parisc bus
  parisc: fix ipv6 checksum
  parisc: quiet palo not-found message from "which"
  parisc: Replace NR_CPUS in parisc code
  parisc: trivial fixes
  parisc: fix braino in commit adding __space_to_prot
  parisc: factor out sid to protid conversion
  parisc: use leX_to_cpu in place of __fswabX
  parisc: fix GFP_KERNEL use while atomic in unwinder
  parisc: remove dead BIO_VMERGE_BOUNDARY and BIO_VMERGE_MAX_SIZE definitions
  parisc: set_time() catch errors
  parisc: use the new byteorder headers
  parisc: drivers/parisc/: make code static
  parisc: lib/: make code static

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (22 commits)
  ioat: fix self test for multi-channel case
  dmaengine: bump initcall level to arch_initcall
  dmaengine: advertise all channels on a device to dma_filter_fn
  dmaengine: use idr for registering dma device numbers
  dmaengine: add a release for dma class devices and dependent infrastructure
  ioat: do not perform removal actions at shutdown
  iop-adma: enable module removal
  iop-adma: kill debug BUG_ON
  iop-adma: let devm do its job, don't duplicate free
  dmaengine: kill enum dma_state_client
  dmaengine: remove 'bigref' infrastructure
  dmaengine: kill struct dma_client and supporting infrastructure
  dmaengine: replace dma_async_client_register with dmaengine_get
  atmel-mci: convert to dma_request_channel and down-level dma_slave
  dmatest: convert to dma_request_channel
  dmaengine: introduce dma_request_channel and private channels
  net_dma: convert to dma_find_channel
  dmaengine: provide a common 'issue_pending_all' implementation
  dmaengine: centralize channel allocation, introduce dma_find_channel
  dmaengine: up-level reference counting to the module level
  ...

MTD size is 64-bit now...

Pointed out by Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

[dwmw2: updated and made to still register whole device first]
Signed-off-by: Philip Rakity <pakity@yahoo.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

The NOR Flash memory K8P2815UQB from Samsung uses the major version
number '0'. Add a quirk to cope with it.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Conflicts:
	drivers/misc/Kconfig
Signed-off-by: Len Brown <len.brown@intel.com>

Conflicts:
	drivers/acpi/pci_irq.c

Note that this merge disables
e1d3a908
pci, acpi: reroute PCI interrupt to legacy boot interrupt equivalent
Signed-off-by: Len Brown <len.brown@intel.com>