commit 2b135db3 upstream.

The pkey mapping for RoCE must remain the default mapping:
VFs:
  virtual index 0 = mapped to real index 0 (0xFFFF)
  All others indices: mapped to a real pkey index containing an
                      invalid pkey.
PF:
  virtual index i = real index i.

Don't allow users to change these mappings using files found in
sysfs.

Fixes: c1e7e466 ('IB/mlx4: Add iov directory in sysfs under the ib device')
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 35d4a0b6 upstream.

Fixes: 2a72f212 ("IB/uverbs: Remove dev_table")

Before this commit there was a device look-up table that was protected
by a spin_lock used by ib_uverbs_open and by ib_uverbs_remove_one. When
it was dropped and container_of was used instead, it enabled the race
with remove_one as dev might be freed just after:
dev = container_of(inode->i_cdev, struct ib_uverbs_device, cdev) but
before the kref_get.

In addition, this buggy patch added some dead code as
container_of(x,y,z) can never be NULL and so dev can never be NULL.
As a result the comment above ib_uverbs_open saying "the open method
will either immediately run -ENXIO" is wrong as it can never happen.

The solution follows Jason Gunthorpe suggestion from below URL:
https://www.mail-archive.com/linux-rdma@vger.kernel.org/msg25692.html

cdev will hold a kref on the parent (the containing structure,
ib_uverbs_device) and only when that kref is released it is
guaranteed that open will never be called again.

In addition, fixes the active count scheme to use an atomic
not a kref to prevent WARN_ON as pointed by above comment
from Jason.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b632ffa7 upstream.

We have many WR opcodes that are only supported in kernel space
and/or require optional information to be copied into the WR
structure.  Reject all those not explicitly handled so that we
can't pass invalid information to drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d6f1c17e upstream.

The lkey table is allocated with with a get_user_pages() with an
order based on a number of index bits from a module parameter.

The underlying kernel code cannot allocate that many contiguous pages.

There is no reason the underlying memory needs to be physically
contiguous.

This patch:
- switches the allocation/deallocation to vmalloc/vfree
- caps the number of bits to 23 to insure at least 1 generation bit
  o this matches the module parameter description
Reviewed-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b4cc0efe upstream.

Fix B-tree corruption when a new record is inserted at position 0 in the
node in hfs_brec_insert().

This is an identical change to the corresponding hfs b-tree code to Sergei
Antonov's "hfsplus: fix B-tree corruption after insertion at position 0",
to keep similar code paths in the hfs and hfsplus drivers in sync, where
appropriate.
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Sergei Antonov <saproj@gmail.com>
Cc: Joe Perches <joe@perches.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1401c00e upstream.

Unmapping may require sleeping and we unmap while holding priv->lock, so
convert it to a mutex.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 299b0685 upstream.

'reshape_position' tracks where in the reshape we have reached.
'reshape_safe' tracks where in the reshape we have safely recorded
in the metadata.

These are compared to determine when to update the metadata.
So it is important that reshape_safe is initialised properly.
Currently it isn't.  When starting a reshape from the beginning
it usually has the correct value by luck.  But when reducing the
number of devices in a RAID10, it has the wrong value and this leads
to the metadata not being updated correctly.
This can lead to corruption if the reshape is not allowed to complete.

This patch is suitable for any -stable kernel which supports RAID10
reshape, which is 3.5 and later.

Fixes: 3ea7daa5 ("md/raid10: add reshape support")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 71f8a4b8 upstream.

The following panic is captured in ker3.14, but the issue still exists
in latest kernel.
---------------------------------------------------------------------
[   20.738217] c0 3136 (Compiler) Unable to handle kernel NULL pointer dereference
at virtual address 00000578
......
[   20.738499] c0 3136 (Compiler) PC is at _raw_spin_lock_irqsave+0x24/0x60
[   20.738527] c0 3136 (Compiler) LR is at _raw_spin_lock_irqsave+0x20/0x60
[   20.740134] c0 3136 (Compiler) Call trace:
[   20.740165] c0 3136 (Compiler) [<ffffffc0008ee900>] _raw_spin_lock_irqsave+0x24/0x60
[   20.740200] c0 3136 (Compiler) [<ffffffc0000dd024>] __wake_up+0x1c/0x54
[   20.740230] c0 3136 (Compiler) [<ffffffc000639414>] mmc_wait_data_done+0x28/0x34
[   20.740262] c0 3136 (Compiler) [<ffffffc0006391a0>] mmc_request_done+0xa4/0x220
[   20.740314] c0 3136 (Compiler) [<ffffffc000656894>] sdhci_tasklet_finish+0xac/0x264
[   20.740352] c0 3136 (Compiler) [<ffffffc0000a2b58>] tasklet_action+0xa0/0x158
[   20.740382] c0 3136 (Compiler) [<ffffffc0000a2078>] __do_softirq+0x10c/0x2e4
[   20.740411] c0 3136 (Compiler) [<ffffffc0000a24bc>] irq_exit+0x8c/0xc0
[   20.740439] c0 3136 (Compiler) [<ffffffc00008489c>] handle_IRQ+0x48/0xac
[   20.740469] c0 3136 (Compiler) [<ffffffc000081428>] gic_handle_irq+0x38/0x7c
----------------------------------------------------------------------
Because in SMP, "mrq" has race condition between below two paths:
path1: CPU0: <tasklet context>
  static void mmc_wait_data_done(struct mmc_request *mrq)
  {
     mrq->host->context_info.is_done_rcv = true;
     //
     // If CPU0 has just finished "is_done_rcv = true" in path1, and at
     // this moment, IRQ or ICache line missing happens in CPU0.
     // What happens in CPU1 (path2)?
     //
     // If the mmcqd thread in CPU1(path2) hasn't entered to sleep mode:
     // path2 would have chance to break from wait_event_interruptible
     // in mmc_wait_for_data_req_done and continue to run for next
     // mmc_request (mmc_blk_rw_rq_prep).
     //
     // Within mmc_blk_rq_prep, mrq is cleared to 0.
     // If below line still gets host from "mrq" as the result of
     // compiler, the panic happens as we traced.
     wake_up_interruptible(&mrq->host->context_info.wait);
  }

path2: CPU1: <The mmcqd thread runs mmc_queue_thread>
  static int mmc_wait_for_data_req_done(...
  {
     ...
     while (1) {
           wait_event_interruptible(context_info->wait,
                   (context_info->is_done_rcv ||
                    context_info->is_new_req));
     	   static void mmc_blk_rw_rq_prep(...
           {
           ...
           memset(brq, 0, sizeof(struct mmc_blk_request));

This issue happens very coincidentally; however adding mdelay(1) in
mmc_wait_data_done as below could duplicate it easily.

   static void mmc_wait_data_done(struct mmc_request *mrq)
   {
     mrq->host->context_info.is_done_rcv = true;
+    mdelay(1);
     wake_up_interruptible(&mrq->host->context_info.wait);
    }

At runtime, IRQ or ICache line missing may just happen at the same place
of the mdelay(1).

This patch gets the mmc_context_info at the beginning of function, it can
avoid this race condition.
Signed-off-by: Jialing Fu <jlfu@marvell.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: 2220eedf ("mmc: fix async request mechanism ....")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fbb18169 upstream.

It was possible for an attacking user to trick root (or another user) into
writing his coredumps into an attacker-readable, pre-existing file using
rename() or link(), causing the disclosure of secret data from the victim
process' virtual memory.  Depending on the configuration, it was also
possible to trick root into overwriting system files with coredumps.  Fix
that issue by never writing coredumps into existing files.

Requirements for the attack:
 - The attack only applies if the victim's process has a nonzero
   RLIMIT_CORE and is dumpable.
 - The attacker can trick the victim into coredumping into an
   attacker-writable directory D, either because the core_pattern is
   relative and the victim's cwd is attacker-writable or because an
   absolute core_pattern pointing to a world-writable directory is used.
 - The attacker has one of these:
  A: on a system with protected_hardlinks=0:
     execute access to a folder containing a victim-owned,
     attacker-readable file on the same partition as D, and the
     victim-owned file will be deleted before the main part of the attack
     takes place. (In practice, there are lots of files that fulfill
     this condition, e.g. entries in Debian's /var/lib/dpkg/info/.)
     This does not apply to most Linux systems because most distros set
     protected_hardlinks=1.
  B: on a system with protected_hardlinks=1:
     execute access to a folder containing a victim-owned,
     attacker-readable and attacker-writable file on the same partition
     as D, and the victim-owned file will be deleted before the main part
     of the attack takes place.
     (This seems to be uncommon.)
  C: on any system, independent of protected_hardlinks:
     write access to a non-sticky folder containing a victim-owned,
     attacker-readable file on the same partition as D
     (This seems to be uncommon.)

The basic idea is that the attacker moves the victim-owned file to where
he expects the victim process to dump its core.  The victim process dumps
its core into the existing file, and the attacker reads the coredump from
it.

If the attacker can't move the file because he does not have write access
to the containing directory, he can instead link the file to a directory
he controls, then wait for the original link to the file to be deleted
(because the kernel checks that the link count of the corefile is 1).

A less reliable variant that requires D to be non-sticky works with link()
and does not require deletion of the original link: link() the file into
D, but then unlink() it directly before the kernel performs the link count
check.

On systems with protected_hardlinks=0, this variant allows an attacker to
not only gain information from coredumps, but also clobber existing,
victim-writable files with coredumps.  (This could theoretically lead to a
privilege escalation.)
Signed-off-by: Jann Horn <jann@thejh.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c54839a7 upstream.

reclaim_clean_pages_from_list() assumes that shrink_page_list() returns
number of pages removed from the candidate list.  But shrink_page_list()
puts back mlocked pages without passing it to caller and without
counting as nr_reclaimed.  This increases nr_isolated.

To fix this, this patch changes shrink_page_list() to pass unevictable
pages back to caller.  Caller will take care those pages.

Minchan said:

It fixes two issues.

1. With unevictable page, cma_alloc will be successful.

Exactly speaking, cma_alloc of current kernel will fail due to
unevictable pages.

2. fix leaking of NR_ISOLATED counter of vmstat

With it, too_many_isolated works.  Otherwise, it could make hang until
the process get SIGKILL.
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b1b4e435 upstream.

When detecting a serial port on newer PA-RISC machines (with iosapic) we have a
long way to go to find the right IRQ line, registering it, then registering the
serial port and the irq handler for the serial port. During this phase spurious
interrupts for the serial port may happen which then crashes the kernel because
the action handler might not have been set up yet.

So, basically it's a race condition between the serial port hardware and the
CPU which sets up the necessary fields in the irq sructs. The main reason for
this race is, that we unmask the serial port irqs too early without having set
up everything properly before (which isn't easily possible because we need the
IRQ number to register the serial ports).

This patch is a work-around for this problem. It adds checks to the CPU irq
handler to verify if the IRQ action field has been initialized already. If not,
we just skip this interrupt (which isn't critical for a serial port at bootup).
The real fix would probably involve rewriting all PA-RISC specific IRQ code
(for CPU, IOSAPIC, GSC and EISA) to use IRQ domains with proper parenting of
the irq chips and proper irq enabling along this line.

This bug has been in the PA-RISC port since the beginning, but the crashes
happened very rarely with currently used hardware.  But on the latest machine
which I bought (a C8000 workstation), which uses the fastest CPUs (4 x PA8900,
1GHz) and which has the largest possible L1 cache size (64MB each), the kernel
crashed at every boot because of this race. So, without this patch the machine
would currently be unuseable.

For the record, here is the flow logic:
1. serial_init_chip() in 8250_gsc.c calls iosapic_serial_irq().
2. iosapic_serial_irq() calls txn_alloc_irq() to find the irq.
3. iosapic_serial_irq() calls cpu_claim_irq() to register the CPU irq
4. cpu_claim_irq() unmasks the CPU irq (which it shouldn't!)
5. serial_init_chip() then registers the 8250 port.
Problems:
- In step 4 the CPU irq shouldn't have been registered yet, but after step 5
- If serial irq happens between 4 and 5 have finished, the kernel will crash
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1b59ddfc upstream.

The attached change fixes the condition used in the "sub" instruction.
A double word comparison is needed.  This fixes the 64-bit LWS CAS
operation on 64-bit kernels.

I can now enable 64-bit atomic support in GCC.

Signed-off-by: John David Anglin <dave.anglin>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e9ae58ae upstream.

We should ensure that we always set the pgio_header's error field
if a READ or WRITE RPC call returns an error. The current code depends
on 'hdr->good_bytes' always being initialised to a large value, which
is not always done correctly by callers.
When this happens, applications may end up missing important errors.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 18e3b739 upstream.

---Steps to Reproduce--
<nfs-server>
# cat /etc/exports
/nfs/referal  *(rw,insecure,no_subtree_check,no_root_squash,crossmnt)
/nfs/old      *(ro,insecure,subtree_check,root_squash,crossmnt)

<nfs-client>
# mount -t nfs nfs-server:/nfs/ /mnt/
# ll /mnt/*/

<nfs-server>
# cat /etc/exports
/nfs/referal   *(rw,insecure,no_subtree_check,no_root_squash,crossmnt,refer=/nfs/old/@nfs-server)
/nfs/old       *(ro,insecure,subtree_check,root_squash,crossmnt)
# service nfs restart

<nfs-client>
# ll /mnt/*/    --->>>>> oops here

[ 5123.102925] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 5123.103363] IP: [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4]
[ 5123.103752] PGD 587b9067 PUD 3cbf5067 PMD 0
[ 5123.104131] Oops: 0000 [#1]
[ 5123.104529] Modules linked in: nfsv4(OE) nfs(OE) fscache(E) nfsd(OE) xfs libcrc32c iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi coretemp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev vmw_balloon parport_pc parport i2c_piix4 shpchp auth_rpcgss nfs_acl vmw_vmci lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi serio_raw scsi_transport_spi e1000 mptscsih mptbase ata_generic pata_acpi [last unloaded: nfsd]
[ 5123.105887] CPU: 0 PID: 15853 Comm: ::1-manager Tainted: G           OE   4.2.0-rc6+ #214
[ 5123.106358] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
[ 5123.106860] task: ffff88007620f300 ti: ffff88005877c000 task.ti: ffff88005877c000
[ 5123.107363] RIP: 0010:[<ffffffffa03ed38b>]  [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4]
[ 5123.107909] RSP: 0018:ffff88005877fdb8  EFLAGS: 00010246
[ 5123.108435] RAX: ffff880053f3bc00 RBX: ffff88006ce6c908 RCX: ffff880053a0d240
[ 5123.108968] RDX: ffffea0000e6d940 RSI: ffff8800399a0000 RDI: ffff88006ce6c908
[ 5123.109503] RBP: ffff88005877fe28 R08: ffffffff81c708a0 R09: 0000000000000000
[ 5123.110045] R10: 00000000000001a2 R11: ffff88003ba7f5c8 R12: ffff880054c55800
[ 5123.110618] R13: 0000000000000000 R14: ffff880053a0d240 R15: ffff880053a0d240
[ 5123.111169] FS:  0000000000000000(0000) GS:ffffffff81c27000(0000) knlGS:0000000000000000
[ 5123.111726] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5123.112286] CR2: 0000000000000000 CR3: 0000000054cac000 CR4: 00000000001406f0
[ 5123.112888] Stack:
[ 5123.113458]  ffffea0000e6d940 ffff8800399a0000 00000000000167d0 0000000000000000
[ 5123.114049]  0000000000000000 0000000000000000 0000000000000000 00000000a7ec82c6
[ 5123.114662]  ffff88005877fe18 ffffea0000e6d940 ffff8800399a0000 ffff880054c55800
[ 5123.115264] Call Trace:
[ 5123.115868]  [<ffffffffa03fb44b>] nfs4_try_migration+0xbb/0x220 [nfsv4]
[ 5123.116487]  [<ffffffffa03fcb3b>] nfs4_run_state_manager+0x4ab/0x7b0 [nfsv4]
[ 5123.117104]  [<ffffffffa03fc690>] ? nfs4_do_reclaim+0x510/0x510 [nfsv4]
[ 5123.117813]  [<ffffffff810a4527>] kthread+0xd7/0xf0
[ 5123.118456]  [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160
[ 5123.119108]  [<ffffffff816d9cdf>] ret_from_fork+0x3f/0x70
[ 5123.119723]  [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160
[ 5123.120329] Code: 4c 8b 6a 58 74 17 eb 52 48 8d 55 a8 89 c6 4c 89 e7 e8 4a b5 ff ff 8b 45 b0 85 c0 74 1c 4c 89 f9 48 8b 55 90 48 8b 75 98 48 89 df <41> ff 55 00 3d e8 d8 ff ff 41 89 c6 74 cf 48 8b 4d c8 65 48 33
[ 5123.121643] RIP  [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4]
[ 5123.122308]  RSP <ffff88005877fdb8>
[ 5123.122942] CR2: 0000000000000000

Fixes: ec011fe8 ("NFS: Introduce a vector of migration recovery ops")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit efcbc04e upstream.

It is unusual to combine the open flags O_RDONLY and O_EXCL, but
it appears that libre-office does just that.

[pid  3250] stat("/home/USER/.config", {st_mode=S_IFDIR|0700, st_size=8192, ...}) = 0
[pid  3250] open("/home/USER/.config/libreoffice/4-suse/user/extensions/buildid", O_RDONLY|O_EXCL <unfinished ...>

NFSv4 takes O_EXCL as a sign that a setattr command should be sent,
probably to reset the timestamps.

When it was an O_RDONLY open, the SETATTR command does not
identify any actual attributes to change.
If no delegation was provided to the open, the SETATTR uses the
all-zeros stateid and the request is accepted (at least by the
Linux NFS server - no harm, no foul).

If a read-delegation was provided, this is used in the SETATTR
request, and a Netapp filer will justifiably claim
NFS4ERR_BAD_STATEID, which the Linux client takes as a sign
to retry - indefinitely.

So only treat O_EXCL specially if O_CREAT was also given.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1f9b8c8f upstream.

While we are committing a transaction, it's possible the previous one is
still finishing its commit and therefore we wait for it to finish first.
However we were not checking if that previous transaction ended up getting
aborted after we waited for it to commit, so we ended up committing the
current transaction which can lead to fs corruption because the new
superblock can point to trees that have had one or more nodes/leafs that
were never durably persisted.
The following sequence diagram exemplifies how this is possible:

          CPU 0                                                        CPU 1

  transaction N starts

  (...)

  btrfs_commit_transaction(N)

    cur_trans->state = TRANS_STATE_COMMIT_START;
    (...)
    cur_trans->state = TRANS_STATE_COMMIT_DOING;
    (...)

    cur_trans->state = TRANS_STATE_UNBLOCKED;
    root->fs_info->running_transaction = NULL;

                                                              btrfs_start_transaction()
                                                                 --> starts transaction N + 1

    btrfs_write_and_wait_transaction(trans, root);
      --> starts writing all new or COWed ebs created
          at transaction N

                                                              creates some new ebs, COWs some
                                                              existing ebs but doesn't COW or
                                                              deletes eb X

                                                              btrfs_commit_transaction(N + 1)
                                                                (...)
                                                                cur_trans->state = TRANS_STATE_COMMIT_START;
                                                                (...)
                                                                wait_for_commit(root, prev_trans);
                                                                  --> prev_trans == transaction N

    btrfs_write_and_wait_transaction() continues
    writing ebs
       --> fails writing eb X, we abort transaction N
           and set bit BTRFS_FS_STATE_ERROR on
           fs_info->fs_state, so no new transactions
           can start after setting that bit

       cleanup_transaction()
         btrfs_cleanup_one_transaction()
           wakes up task at CPU 1

                                                                continues, doesn't abort because
                                                                cur_trans->aborted (transaction N + 1)
                                                                is zero, and no checks for bit
                                                                BTRFS_FS_STATE_ERROR in fs_info->fs_state
                                                                are made

                                                                btrfs_write_and_wait_transaction(trans, root);
                                                                  --> succeeds, no errors during writeback

                                                                write_ctree_super(trans, root, 0);
                                                                  --> succeeds
                                                                  --> we have now a superblock that points us
                                                                      to some root that uses eb X, which was
                                                                      never written to disk

In this scenario future attempts to read eb X from disk results in an
error message like "parent transid verify failed on X wanted Y found Z".

So fix this by aborting the current transaction if after waiting for the
previous transaction we verify that it was aborted.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9d39f054 upstream.

Commit 813f5c0a ("media: Change media device link_notify behaviour")
modified the media controller link setup notification API and updated the
OMAP3 ISP driver accordingly. As a side effect it introduced a bug by
turning power on after setting the link instead of before. This results in
sub-devices not being powered down in some cases when they should be. Fix
it.

Fixes: 813f5c0a [media] media: Change media device link_notify behaviour
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a66b0c41 upstream.

The input_dev is already gone when the rc device is being unregistered
so checking for its presence only means that no remove uevent will be
generated.
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9962eea9 upstream.

The variable pmd_idx is not initialized for the first iteration of the
for loop.

Assign the proper value which indexes the start address.

Fixes: 719272c4 'x86, mm: only call early_ioremap_page_table_range_init() once'
Signed-off-by: Minfei Huang <mnfhuang@gmail.com>
Cc: tony.luck@intel.com
Cc: wangnan0@huawei.com
Cc: david.vrabel@citrix.com
Reviewed-by: yinghai@kernel.org
Link: http://lkml.kernel.org/r/1436703522-29552-1-git-send-email-mhuang@redhat.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 04697858 upstream.

Tony Luck found on his setup, if memory block size 512M will cause crash
during booting.

  BUG: unable to handle kernel paging request at ffffea0074000020
  IP: get_nid_for_pfn+0x17/0x40
  PGD 128ffcb067 PUD 128ffc9067 PMD 0
  Oops: 0000 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8 #1
  ...
  Call Trace:
     ? register_mem_sect_under_node+0x66/0xe0
     register_one_node+0x17b/0x240
     ? pci_iommu_alloc+0x6e/0x6e
     topology_init+0x3c/0x95
     do_one_initcall+0xcd/0x1f0

The system has non continuous RAM address:
 BIOS-e820: [mem 0x0000001300000000-0x0000001cffffffff] usable
 BIOS-e820: [mem 0x0000001d70000000-0x0000001ec7ffefff] usable
 BIOS-e820: [mem 0x0000001f00000000-0x0000002bffffffff] usable
 BIOS-e820: [mem 0x0000002c18000000-0x0000002d6fffefff] usable
 BIOS-e820: [mem 0x0000002e00000000-0x00000039ffffffff] usable

So there are start sections in memory block not present.  For example:

    memory block : [0x2c18000000, 0x2c20000000) 512M

first three sections are not present.

The current register_mem_sect_under_node() assume first section is
present, but memory block section number range [start_section_nr,
end_section_nr] would include not present section.

For arch that support vmemmap, we don't setup memmap for struct page
area within not present sections area.

So skip the pfn range that belong to absent section.

[akpm@linux-foundation.org: simplification]
[rientjes@google.com: more simplification]
Fixes: bdee237c ("x86: mm: Use 2GB memory block size on large memory x86-64 systems")
Fixes: 982792c7 ("x86, mm: probe memory block size for generic x86 64bit")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 09bfda10 upstream.

With the radeon driver loaded the HP Compaq dc5750
Small Form Factor machine fails to resume from suspend.
Adding a quirk similar to other devices avoids
the problem and the system resumes properly.
Signed-off-by: Jeffery Miller <jmiller@neverware.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4c17a6d5 upstream.

This might lead to local privilege escalation (code execution as
kernel) for systems where the following conditions are met:

 - CONFIG_CIFS_SMB2 and CONFIG_CIFS_POSIX are enabled
 - a cifs filesystem is mounted where:
  - the mount option "vers" was used and set to a value >=2.0
  - the attacker has write access to at least one file on the filesystem

To attack this, an attacker would have to guess the target_tcon
pointer (but guessing wrong doesn't cause a crash, it just returns an
error code) and win a narrow race.
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 36b35d5d upstream.

If we had secondary hash flag set, we ended up modifying hash value in
the updatepp code path. Hence with a failed updatepp we will be using
a wrong hash value for the following hash insert. Fix this by
recomputing hash before insert.

Without this patch we can end up with using wrong slot number in linux
pte. That can result in us missing an hash pte update or invalidate
which can cause memory corruption or even machine check.

Fixes: 6d492ecc ("powerpc/THP: Add code to handle HPTE faults for hugepages")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1c2cb594 upstream.

The EPOW interrupt handler uses rtas_get_sensor(), which in turn
uses rtas_busy_delay() to wait for RTAS becoming ready in case it
is necessary. But rtas_busy_delay() is annotated with might_sleep()
and thus may not be used by interrupts handlers like the EPOW handler!
This leads to the following BUG when CONFIG_DEBUG_ATOMIC_SLEEP is
enabled:

 BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:496
 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.2.0-rc2-thuth #6
 Call Trace:
 [c00000007ffe7b90] [c000000000807670] dump_stack+0xa0/0xdc (unreliable)
 [c00000007ffe7bc0] [c0000000000e1f14] ___might_sleep+0x134/0x180
 [c00000007ffe7c20] [c00000000002aec0] rtas_busy_delay+0x30/0xd0
 [c00000007ffe7c50] [c00000000002bde4] rtas_get_sensor+0x74/0xe0
 [c00000007ffe7ce0] [c000000000083264] ras_epow_interrupt+0x44/0x450
 [c00000007ffe7d90] [c000000000120260] handle_irq_event_percpu+0xa0/0x300
 [c00000007ffe7e70] [c000000000120524] handle_irq_event+0x64/0xc0
 [c00000007ffe7eb0] [c000000000124dbc] handle_fasteoi_irq+0xec/0x260
 [c00000007ffe7ef0] [c00000000011f4f0] generic_handle_irq+0x50/0x80
 [c00000007ffe7f20] [c000000000010f3c] __do_irq+0x8c/0x200
 [c00000007ffe7f90] [c0000000000236cc] call_do_irq+0x14/0x24
 [c00000007e6f39e0] [c000000000011144] do_IRQ+0x94/0x110
 [c00000007e6f3a30] [c000000000002594] hardware_interrupt_common+0x114/0x180

Fix this issue by introducing a new rtas_get_sensor_fast() function
that does not use rtas_busy_delay() - and thus can only be used for
sensors that do not cause a BUSY condition - known as "fast" sensors.

The EPOW sensor is defined to be "fast" in sPAPR - mpe.

Fixes: 587f83e8 ("powerpc/pseries: Use rtas_get_sensor in RAS code")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 74b5037b upstream.

The powerpc kernel can be built to have either a 4K PAGE_SIZE or a 64K
PAGE_SIZE.

However when built with a 4K PAGE_SIZE there is an additional config
option which can be enabled, PPC_HAS_HASH_64K, which means the kernel
also knows how to hash a 64K page even though the base PAGE_SIZE is 4K.

This is used in one obscure configuration, to support 64K pages for SPU
local store on the Cell processor when the rest of the kernel is using
4K pages.

In this configuration, pte_pagesize_index() is defined to just pass
through its arguments to get_slice_psize(). However pte_pagesize_index()
is called for both user and kernel addresses, whereas get_slice_psize()
only knows how to handle user addresses.

This has been broken forever, however until recently it happened to
work. That was because in get_slice_psize() the large kernel address
would cause the right shift of the slice mask to return zero.

However in commit 7aa0727f ("powerpc/mm: Increase the slice range to
64TB"), the get_slice_psize() code was changed so that instead of a
right shift we do an array lookup based on the address. When passed a
kernel address this means we index way off the end of the slice array
and return random junk.

That is only fatal if we happen to hit something non-zero, but when we
do return a non-zero value we confuse the MMU code and eventually cause
a check stop.

This fix is ugly, but simple. When we're called for a kernel address we
return 4K, which is always correct in this configuration, otherwise we
use the slice mask.

Fixes: 7aa0727f ("powerpc/mm: Increase the slice range to 64TB")
Reported-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a161574e upstream.

It turned out that the machine has a bass speaker, so take a correct
fixup entry.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102501Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bb148bde upstream.

According to the bug report, FSC Amilo laptops with ALC880 can detect
the headphone jack but currently the driver disables it.  It's partly
intentionally, as non-working jack detect was reported in the past.
Let's enable now.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102501Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit eb38f3a4 upstream.

We've got bug reports showing the old systemd-logind (at least
system-210) aborting unexpectedly, and this turned out to be because
of an invalid error code from close() call to evdev devices.  close()
is supposed to return only either EINTR or EBADFD, while the device
returned ENODEV.  logind was overreacting to it and decided to kill
itself when an unexpected error code was received.  What a tragedy.

The bad error code comes from flush fops, and actually evdev_flush()
returns ENODEV when device is disconnected or client's access to it is
revoked. But in these cases the fact that flush did not actually happen is
not an error, but rather normal behavior. For non-disconnected devices
result of flush is also not that interesting as there is no potential of
data loss and even if it fails application has no way of handling the
error. Because of that we are better off always returning success from
evdev_flush().

Also returning EINTR from flush()/close() is discouraged (as it is not
clear how application should handle this error), so let's stop taking
evdev->mutex interruptibly.

Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=939834Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c4cbba9f upstream.

When running a guest with the architected timer disabled (with QEMU and
the kernel_irqchip=off option, for example), it is important to make
sure the timer gets turned off. Otherwise, the guest may try to
enable it anyway, leading to a screaming HW interrupt.

The fix is to unconditionally turn off the virtual timer on guest
exit.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit df057cc7 upstream.

Cortex-A53 processors <= r0p4 are affected by erratum #843419 which can
lead to a memory access using an incorrect address in certain sequences
headed by an ADRP instruction.

There is a linker fix to generate veneers for ADRP instructions, but
this doesn't work for kernel modules which are built as unlinked ELF
objects.

This patch adds a new config option for the erratum which, when enabled,
builds kernel modules with the mcmodel=large flag. This uses absolute
addressing for all kernel symbols, thereby removing the use of ADRP as
a PC-relative form of addressing. The ADRP relocs are removed from the
module loader so that we fail to load any potentially affected modules.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d10bcd47 upstream.

When entering the kernel at EL2, we fail to initialise the MDCR_EL2
register which controls debug access and PMU capabilities at EL1.

This patch ensures that the register is initialised so that all traps
are disabled and all the PMU counters are available to the host. When a
guest is scheduled, KVM takes care to configure trapping appropriately.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bdec97a8 upstream.

When saving/restoring the VFP registers from a compat (AArch32)
signal frame, we rely on the compat registers forming a prefix of the
native register file and therefore make use of copy_{to,from}_user to
transfer between the native fpsimd_state and the compat_vfp_sigframe.

Unfortunately, this doesn't work so well in a big-endian environment.
Our fpsimd save/restore code operates directly on 128-bit quantities
(Q registers) whereas the compat_vfp_sigframe represents the registers
as an array of 64-bit (D) registers. The architecture packs the compat D
registers into the Q registers, with the least significant bytes holding
the lower register. Consequently, we need to swap the 64-bit halves when
converting between these two representations on a big-endian machine.

This patch replaces the __copy_{to,from}_user invocations in our
compat VFP signal handling code with explicit __put_user loops that
operate on 64-bit values and swap them accordingly.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bf0c4e04 upstream.

Move the poison pointer offset to 0xdead000000000000, a
recognized value that is not mappable by user-space exploits.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Thierry Strudel <tstrudel@google.com>
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3633ebeb upstream.

We already set a station to be associated when peering completes, both
in user space and in the kernel.  Thus we should always have an
associated sta before sending data frames to that station.

Failure to check assoc state can cause crashes in the lower-level driver
due to transmitting unicast data frames before driver sta structures
(e.g. ampdu state in ath9k) are initialized.  This occurred when
forwarding in the presence of fixed mesh paths: frames were transmitted
to stations with whom we hadn't yet completed peering.
Reported-by: Alexis Green <agreen@cococorp.com>
Tested-by: Jesse Jones <jjones@cococorp.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d3d11fe0 upstream.

The temperature registers appear to report values in degrees Celsius
while the hwmon API mandates values to be exposed in millidegrees
Celsius. Do the conversion so that the values reported by "sensors"
are correct.

Fixes: aed93e0b ("tg3: Add hwmon support for temperature")
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Prashant Sreedharan <prashant@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1642d09f upstream.

The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 12c641ab upstream.

In the logic in the initial commit of unshare made creating a new
thread group for a process, contingent upon creating a new memory
address space for that process.  That is wrong.  Two separate
processes in different thread groups can share a memory address space
and clone allows creation of such proceses.

This is significant because it was observed that mm_users > 1 does not
mean that a process is multi-threaded, as reading /proc/PID/maps
temporarily increments mm_users, which allows other processes to
(accidentally) interfere with unshare() calls.

Correct the check in check_unshare_flags() to test for
!thread_group_empty() for CLONE_THREAD, CLONE_SIGHAND, and CLONE_VM.
For sighand->count > 1 for CLONE_SIGHAND and CLONE_VM.
For !current_is_single_threaded instead of mm_users > 1 for CLONE_VM.

By using the correct checks in unshare this removes the possibility of
an accidental denial of service attack.

Additionally using the correct checks in unshare ensures that only an
explicit unshare(CLONE_VM) can possibly trigger the slow path of
current_is_single_threaded().  As an explict unshare(CLONE_VM) is
pointless it is not expected there are many applications that make
that call.

Fixes: b2e0d987 userns: Implement unshare of the user namespace
Reported-by: Ricky Zhou <rickyz@chromium.org>
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 596f5aad upstream.

There may be lots of pending requests so that the buffer of PAGE_SIZE
can't hold them at all.

One typical example is scsi-mq, the queue depth(.can_queue) of
scsi_host and blk-mq is quite big but scsi_device's queue_depth
is a bit small(.cmd_per_lun), then it is quite easy to have lots
of pending requests in hw queue.

This patch fixes the following warning and the related memory
destruction.

[  359.025101] fill_read_buffer: blk_mq_hw_sysfs_show+0x0/0x7d returned bad count^M
[  359.055595] irq event stamp: 15537^M
[  359.055606] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ^M
[  359.055614] Dumping ftrace buffer:^M
[  359.055660]    (ftrace buffer empty)^M
[  359.055672] Modules linked in: nbd ipv6 kvm_intel kvm serio_raw^M
[  359.055678] CPU: 4 PID: 21631 Comm: stress-ng-sysfs Not tainted 4.2.0-rc5-next-20150805 #434^M
[  359.055679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011^M
[  359.055682] task: ffff8802161cc000 ti: ffff88021b4a8000 task.ti: ffff88021b4a8000^M
[  359.055693] RIP: 0010:[<ffffffff811541c5>]  [<ffffffff811541c5>] __kmalloc+0xe8/0x152^M
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e326f78 upstream.

We can call this function for a dummy console that doesn't support
setting the font mapping, which will result in a null ptr BUG. So check
for this case and return error for consoles w/o font mapping support.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=59321Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>