Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Not used anywhere yet, but this complements the existing plain
'insert_resource()' functionality with a version that can expand the
resource we are adding in order to fix up any conflicts it has with
existing resources.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: oxygen: fix distorted output on AK4396-based cards
  Revert "ALSA: hda - Added model selection for iMac 24""

Pulling the ethernet cable on a 2.6.27-rc system with NFS mounts
currently leads to an ongoing flood of soft lockup detector backtraces
for all tasks blocked on the NFS mounts when the hickup takes
longer than 120s.

I don't think NFS problems should be all that noisy.

Luckily there's a reasonably easy way to distingush this case.

Don't report task softlockup warnings for tasks in TASK_KILLABLE
state, which is used by the network file systems.

I believe this patch is a 2.6.27 candidate.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit a2bd7274.

It wasn't really right to begin with (there's a better fix for the
problem with e820 reservations clashing with PCI BAR's pending), but it
also actually causes more regressions, so it should be reverted even
before the better fix is finalized.

Rafael reports that this commit broke AHCI detection, and thus causes
the kernel to not boot on his quad core test box.
Reported-and-bisected-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: David Witbrodt <dawitbro@sbcglobal.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When changing the sample rate, the CMI8788's master clock output becomes
unstable for a short time.  The AK4396 needs the master clock to do SPI
writes, so writing to an AK4396 control register directly after a sample
rate change will garble the value.  In our case, this leads to the DACs
being misconfigured to I2S sample format, which results in a wrong
output level and horrible distortions on samples louder than -6 dB.

To fix this, we need to wait until the new master clock signal has
become stable before doing SPI writes.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5226/1: remove unmatched comment end.
  [ARM] Skip memory holes in FLATMEM when reading /proc/pagetypeinfo
  [ARM] use bcd2bin/bin2bcd
  [ARM] use the new byteorder headers
  [ARM] OMAP: Fix 2430 SMC91x ethernet IRQ
  [ARM] OMAP: Add and update OMAP default configuration files
  [ARM] OMAP: Change mailing list for OMAP in MAINTAINERS
  [ARM] S3C2443: Fix the S3C2443 clock register definitions
  [ARM] JIVE: Fix the spi bus numbering
  [ARM] S3C24XX: pwm.c: stop debugging output
  [ARM] S3C24XX: Fix sparse warnings in pwm.c
  [ARM] S3C24XX: Fix spare errors in pwm-clock driver
  [ARM] S3C24XX: Fix sparse warnings in arch/arm/plat-s3c24xx/gpiolib.c
  [ARM] S3C24XX: Fix nor-simtec driver sparse errors
  [ARM] 5225/1: zaurus: Register I2C controller for audio codecs
  [ARM] orion5x: update defconfig to v2.6.27-rc4
  [ARM] Orion: register UART1 on QNAP TS-209 and TS-409
  [ARM] Orion: activate lm75 driver on DNS-323
  [ARM] Orion: fix MAC detection on QNAP TS-209 and TS-409
  [ARM] Orion: Fix boot crash on Kurobox Pro

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: Fix PM building on BF52x: No ROTWE on BF52x, add USBWE
  Blackfin arch: sram: use 'unsigned long' for irqflags
  Blackfin arch: let PCI depend on BROKEN
  Blackfin arch: move include/asm-blackfin header files to arch/blackfin
  Blackfin arch: fix bug - MPU crashes under stress
  Blackfin arch: Fix bug - when to rmmod the L1_module, it stucks and then reboot the board.
  Blackfin arch: dont actually need to muck with EMAC_SYSTAT for BF52x for demuxing
  Blackfin arch: Add MTD Partitions for MTD_DATAFLASH, increase max SPI SCLK

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  exit signals: use of uninitialized field notify_count
  lockdep: fix invalid list_del_rcu in zap_class
  lockstat: repair erronous contention statistics
  lockstat: fix numerical output rounding error

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: rt-bandwidth accounting fix
  sched: fix sched_rt_rq_enqueue() resched idle

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: update defconfigs
  x86: msr: fix bogus return values from rdmsr_safe/wrmsr_safe
  x86: cpuid: correct return value on partial operations
  x86: msr: correct return value on partial operations
  x86: cpuid: propagate error from smp_call_function_single()
  x86: msr: propagate errors from smp_call_function_single()
  smp: have smp_call_function_single() detect invalid CPUs

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Prevent log spam on some DVB adapters
  i2c: Add missing kerneldoc descriptions
  i2c: Fix device_init_wakeup place

In accordance with commit f42ac38c
("ftrace: disable tracing for suspend to ram"), disable tracing
around the suspend code in hibernation code paths.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

remove unmatched comment end.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

It fixes an accounting bug where we would continue accumulating runtime
even though the bandwidth control is disabled. This would lead to very long
throttle periods once bandwidth control gets turned on again.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Using just 'unsigned' will make flags an unsigned int. While this is
arguably not an error on blackfin where sizeof(int) == sizeof(long),
the patch is still justified on the grounds of principle.

The patch was generated using the Coccinelle semantic patch framework.

Cc: Julia Lawall <julia@diku.dk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

When sysctl_sched_rt_runtime is set to something other than -1 and the
CONFIG_RT_GROUP_SCHED kernel parameter is NOT enabled, we get into a state
where we see one or more CPUs idling forvever even though there are
real-time
tasks in their rt runqueue that are able to run (no longer throttled).

The sequence is:

- A real-time task is running when the timer sets the rt runqueue
    to throttled, and the rt task is resched_task()ed and switched
    out, and idle is switched in since there are no non-rt tasks to
    run on that cpu.

- Eventually the do_sched_rt_period_timer() runs and un-throttles
    the rt runqueue, but we just exit the timer interrupt and go back
    to executing the idle task in the idle loop forever.

If we change the sched_rt_rq_enqueue() routine to use some of the code
from the CONFIG_RT_GROUP_SCHED enabled version of this same routine and
resched_task() the currently executing task (idle in our case) if it is
a lower priority task than the higher rt task in the now un-throttled
runqueue, the problem is no longer observed.
Signed-off-by: John Blackwood <john.blackwood@ccur.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Some DVB adapters do not support the special I2C transaction that we
use for probing purposes. There's no point in logging this event, as
there's nothing the user can do and in general there is no actual
problem. So, degrade one of these messages to a debug message, and
move the other one around so that it is only printed on bogus drivers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Uwe Bugla <uwe.bugla@gmx.de>

Add missing kernel descriptions of struct i2c_driver members.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: David Brownell <david-b@pacbell.net>

device_init_wakeup must be called after device_register.
Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (55 commits)
  sctp: fix random memory dereference with SCTP_HMAC_IDENT option.
  sctp: correct bounds check in sctp_setsockopt_auth_key
  wan: Missing capability checks in sbni_ioctl()
  e100, fix iomap read
  qeth: preallocated header account offset
  qeth: l2 write unicast list to hardware
  qeth: use -EOPNOTSUPP instead of -ENOTSUPP.
  ibm_newemac: Don't call dev_mc_add() before device is registered
  net: don't grab a mutex within a timer context in gianfar
  forcedeth: fix checksum flag
  net/usb/mcs7830: add set_mac_address
  net/usb/mcs7830: new device IDs
  [netdrvr] smc91x: fix resource removal (null ptr deref)
  ibmveth: fix bad UDP checksums
  [netdrvr] hso: dev_kfree_skb crash fix
  [netdrvr] hso: icon 322 detection fix
  atl1: disable TSO by default
  atl1e: multistatement if missing braces
  igb: remove 82576 quad adapter
  drivers/net/skfp/ess.c: fix compile warnings
  ...

The number of identifiers needs to be checked against the option
length.  Also, the identifier index provided needs to be verified
to make sure that it doesn't exceed the bounds of the array.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bonds check to prevent buffer overlflow was not exactly
right.  It still allowed overflow of up to 8 bytes which is
sizeof(struct sctp_authkey).

Since optlen is already checked against the size of that struct,
we are guaranteed not to cause interger overflow either.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initialize the L_Key and R_Key for memory regions returned from
mlx4_ib_alloc_fast_reg_mr().  Otherwise callers just get garbage for
the memory keys and can't do anything useful with these MRs.
Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] removed unused #include <version.h>
  [WATCHDOG] at91rm9200_wdt.c: fix misleading indentation
  [WATCHDOG] mpc8xxx_wdt: fix modular build
  [WATCHDOG] hpwdt.c kdebug support
  [WATCHDOG] Add support for the IDT RC32434 watchdog
  [WATCHDOG] Add support for the built-int RDC R-321x SoC watchdog
  [WATHDOG] delete unused driver mpc8xx_wdt.c
  [WATCHDOG] Fix s3c2410_wdt driver coding style issues
  [WATCHDOG] Clean out header of s3c2410_wdt driver.
  [WATCHDOG] Fix NULL usage in s3c2410_wdt driver.

Kanru Chen posted a patch versus the old code which deals with the case
where you resize the pty side of a pty/tty pair. In that situation the
termios data is updated for both pty and tty but the locks are not held
for the right side.

This implements the fix differently against the updated tty code. Patch
by self but the hard bit (noticing and fixing the bug) is thanks to Kanru
Chen.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The termios settings ioctls on a pty should affect the bound tty side not
the pty. The SOFTCAR ioctls use the wrong device file.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Add destroy routine for dns_resolver
  [CIFS] Reorder cifs config item for better clarity
  [CIFS] Correct keys dependency for cifs kerberos support

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: Disable NUMA remote node defragmentation by default

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] deal with the first call of ->show() generating no output
  [PATCH] fix ->llseek() for a bunch of directories
  [PATCH] fix regular readdir() and friends
  [PATCH] fix hpux_getdents()
  [PATCH] fix osf_getdirents()
  [PATCH] ntfs: use d_add_ci
  [PATCH] change d_add_ci argument ordering
  [PATCH] fix efs_lookup()
  [PATCH] proc: inode number fixlet

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Add target for a stripped kernel
  sparc64: Make NUMA depend upon SMP.

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: don't set the signal blocker on the master process.
  drm: don't call the vblank tasklet with irqs disabled.
  r300: Fix cliprect emit
  drm/radeon: r300_cmdbuf: Always emit INDX_BUFFER immediately after DRAW_INDEX
  radeon: fix some hard lockups on r3/4/500s

Otherwise, we're leaking the payload memory.

CC: Stable Kernel <stable@vger.kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Here's the patch. It shrinks the stack from 1152 bytes to 192 bytes (the
first version, that only did the e1000_option part, got it down to 600
bytes). About half comes from not using multiple "e1000_option"
structures, the other half comes from turning the "e1000_opt_list[]"
arrays into "static const" instead, so that gcc doesn't copy them onto the
stack.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reveiewed-by: Auke Kok <auke-jan.h.kok@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: remove blk_queue_tag_depth() and blk_queue_tag_queue()
  block: remove unused ->busy part of the block queue tag map
  bio: fix __bio_copy_iov() handling of bio->bv_len
  bio: fix bio_copy_kern() handling of bio->bv_len
  block: submit_bh() inadvertently discards barrier flag on a sync write
  block: clean up cmdfilter sysfs interface
  block: rename blk_scsi_cmd_filter to blk_cmd_filter
  sg: restore command permission for TYPE_SCANNER
  block: move cmdfilter from gendisk to request_queue