- 11 Jan, 2016 3 commits
-
-
Andrew Lunn authored
Fix a number of build errors due to moving the phy_map and centralizing interrupt allocation. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guenter Roeck authored
Use phy_find_first() to find the first phy device instead of open coding it. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
-
Guenter Roeck authored
Commit 7f854420 ("phy: Add API for {un}registering an mdio device to a bus") introduces an API to access mii_bus structures, but missed to update the sb1250 driver. This results in the following build error. drivers/net/ethernet/broadcom/sb1250-mac.c: In function 'sbmac_mii_probe': drivers/net/ethernet/broadcom/sb1250-mac.c:2360:24: error: 'struct mii_bus' has no member named 'phy_map' Use phy_find_first() instead of open coding it. Commit 2220943a ("phy: Centralise print about attached phy") introduces the following build error. drivers/net/ethernet/broadcom/sb1250-mac.c: In function 'sbmac_mii_probe': drivers/net/ethernet/broadcom/sb1250-mac.c:2383:20: error: 'phydev' undeclared Fixes: 7f854420 ("phy: Add API for {un}registering an mdio device to a bus") Fixes: 2220943a ("phy: Centralise print about attached phy") Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 10 Jan, 2016 24 commits
-
-
David S. Miller authored
Andrew Lunn says: ==================== Fix breakage from mdio device These two patches fix MIPS platforms which got broken by the recent mdio device patchset. ==================== Signed-off-by: -
Andrew Lunn authored
The mdio device patches moved the bus member in phy_device into a substructure. This driver got missed. Fix it. Signed-off-by:
-
Andrew Lunn authored
Make use of the helper to find the first phy device. This also fixes the compile breakage. Signed-off-by:
-
Romain Perier authored
Originally, most of the platforms using this driver did not define an mdio subnode in the devicetree. Commit e34d65 ("stmmac: create of compatible mdio bus for stmmac driver") introduced a backward compatibily issue by using of_mdiobus_register explicitly with an mdio subnode. This patch fixes the issue by calling the function mdiobus_register, when mdio subnode is not found. The driver is now compatible with both modes. Fixes: e34d6569 ("stmmac: create of compatible mdio bus for stmmac driver") Signed-off-by:Romain Perier <romain.perier@gmail.com> Tested-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF update Fixes a csum issue on ingress. As mentioned previously, net-next seems just fine imho. Later on, will follow up with couple of replacements like ovs_skb_postpush_rcsum() etc. Thanks! v1 -> v2: - Added patch 1 with helper - Implemented Hannes' idea to just use csum_partial, thanks! ==================== Signed-off-by: -
Daniel Borkmann authored
Add a small helper skb_postpush_rcsum() and fix up redirect locations that need CHECKSUM_COMPLETE fixups on ingress. dev_forward_skb() expects a proper csum that covers also Ethernet header, f.e. since 2c26d34b ("net/core: Handle csum for CHECKSUM_COMPLETE VXLAN forwarding"), we also do skb_postpull_rcsum() after pulling Ethernet header off via eth_type_trans(). When using eBPF in a netns setup f.e. with vxlan in collect metadata mode, I can trigger the following csum issue with an IPv6 setup: [ 505.144065] dummy1: hw csum failure [...] [ 505.144108] Call Trace: [ 505.144112] <IRQ> [<ffffffff81372f08>] dump_stack+0x44/0x5c [ 505.144134] [<ffffffff81607cea>] netdev_rx_csum_fault+0x3a/0x40 [ 505.144142] [<ffffffff815fee3f>] __skb_checksum_complete+0xcf/0xe0 [ 505.144149] [<ffffffff816f0902>] nf_ip6_checksum+0xb2/0x120 [ 505.144161] [<ffffffffa08c0e0e>] icmpv6_error+0x17e/0x328 [nf_conntrack_ipv6] [ 505.144170] [<ffffffffa0898eca>] ? ip6t_do_table+0x2fa/0x645 [ip6_tables] [ 505.144177] [<ffffffffa08c0725>] ? ipv6_get_l4proto+0x65/0xd0 [nf_conntrack_ipv6] [ 505.144189] [<ffffffffa06c9a12>] nf_conntrack_in+0xc2/0x5a0 [nf_conntrack] [ 505.144196] [<ffffffffa08c039c>] ipv6_conntrack_in+0x1c/0x20 [nf_conntrack_ipv6] [ 505.144204] [<ffffffff8164385d>] nf_iterate+0x5d/0x70 [ 505.144210] [<ffffffff816438d6>] nf_hook_slow+0x66/0xc0 [ 505.144218] [<ffffffff816bd302>] ipv6_rcv+0x3f2/0x4f0 [ 505.144225] [<ffffffff816bca40>] ? ip6_make_skb+0x1b0/0x1b0 [ 505.144232] [<ffffffff8160b77b>] __netif_receive_skb_core+0x36b/0x9a0 [ 505.144239] [<ffffffff8160bdc8>] ? __netif_receive_skb+0x18/0x60 [ 505.144245] [<ffffffff8160bdc8>] __netif_receive_skb+0x18/0x60 [ 505.144252] [<ffffffff8160ccff>] process_backlog+0x9f/0x140 [ 505.144259] [<ffffffff8160c4a5>] net_rx_action+0x145/0x320 [...] What happens is that on ingress, we push Ethernet header back in, either from cls_bpf or right before skb_do_redirect(), but without updating csum. The "hw csum failure" can be fixed by using the new skb_postpush_rcsum() helper for the dev_forward_skb() case to correct the csum diff again. Thanks to Hannes Frederic Sowa for the csum_partial() idea! Fixes: 3896d655 ("bpf: introduce bpf_clone_redirect() helper") Fixes: 27b29f63 ("bpf: add bpf_redirect() helper") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
Add a skb_at_tc_ingress() as this will be needed elsewhere as well and can hide the ugly ifdef. Signed-off-by:
-
David S. Miller authored
Nikolay Borisov says: ==================== Namespaceify tcp keepalive machinery The following patch series enables the tcp keepalive mechanism to be configured per net namespace. This is especially useful if you have multiple containers hosted on one node and one of them is under DoS- in such situations one thing which could be done is to configure the tcp keepalive settings such that connections for that particular container are being reset faster. Another scenario where not being able to control those knob comes per container is problematic is occurs the value of net.netfilter.nf_conntrack_tcp_timeout_established is set below the keepalive interval, in such situations the server won't send an RST packet resulting in applications not trying to reconnect and stale connection waiting. Changing the global keepalive value is a possible solution but it might interfere with other containers. The three patches gradually convert each of the affected knobs to be per netns. I thought it would be easier for review than put everything in one patch. If people deem it more appropriate to squash everything in one patch (maybe after review) I'd be more than happy to do it. The patches have been compile-tested on 4.4 and functionally tested on 3.12 and they work as expected. These are based off 4.4-rc8 ==================== Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Nikolay Borisov authored
This is the final part required to namespaceify the tcp keep alive mechanism. Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
-
Nikolay Borisov authored
This is required to have full tcp keepalive mechanism namespace support. Signed-off-by:
-
Nikolay Borisov authored
Different net namespaces might have different requirements as to the keepalive time of tcp sockets. This might be required in cases where different firewall rules are in place which require tcp timeout sockets to be increased/decreased independently of the host. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Adding layer 2 multicast Elad says: This patchset add Linux hardware reflection for L2 multicast offload and add MC support in mlxsw. For every bridge MDB entry insertion, either by IGMP snooping or by static insertion/removal, a switchdev ops is been called. In mlxsw, a new multicast group (MID) is been created and ports are assigned. When all ports are removed, the multicast group is been deleted. --- v1->v2: - GFP_ATOMIC->GFP_KERNEL change in patch 7/8 ==================== Signed-off-by: -
Elad Raz authored
Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Elad Raz authored
Add SWITCHDEV_OBJ_ID_PORT_MDB switchdev ops support. On first MDB insertion creates a new multicast group (MID) and add members port to the MID. Also add new MDB entry for the flooding-domain (fid-vid) and link the MDB entry to the newly constructed MC group. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Elad Raz authored
Adding a generic function that translate VID to FID. Signed-off-by:
-
Elad Raz authored
Signed-off-by:
-
Elad Raz authored
Adding back SMID register definition and packing. For each MC group a new SMID entry will be generated. Signed-off-by:
-
Elad Raz authored
Multicast-related records have specific format in SFD register. Signed-off-by:
-
Elad Raz authored
Offload MDB changes per port to hardware Signed-off-by:
-
Elad Raz authored
Define HW multicast entry: MAC and VID. Using a MAC address simplifies support for both IPV4 and IPv6. Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== Included changes: - increase internal module version - increase BLA wait periods to 6 - purge BLA backbone table when it is disabled - make sure post function is invoked only if sysfs value is changed - simplify code by removing useless NULL checks - various corrections to existing kerneldoc - minor cleanups ==================== Signed-off-by: -
Jiri Pirko authored
It may happen that we get notification for FDB entry for object (port, lag, vport), which does not exist. Currently we ignore that, which only causes this being re-sent in next notification. The entry will never disappear. So get rid of it by simply removing it using SFD register. Signed-off-by:
-
Jiri Pirko authored
Do not pass struct mlxsw_sp_port to mlxsw_sp_port_fdb_uc_op and rather just pass local_port. This is needed in case this is called from SFN process function and mlxsw_sp_port is not existent for particular local_port. Signed-off-by:
-
Sudip Mukherjee authored
Modify plip driver to use the new parallel port device model. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
- 09 Jan, 2016 13 commits
-
-
Sven Eckelmann authored
Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
Signed-off-by:
-
Sven Eckelmann authored
Signed-off-by:
-
Sven Eckelmann authored
kernel-doc is not able to skip an #ifdef between the kernel documentation block and the start of the struct. Moving the #ifdef before the kernel doc block avoids this problem Signed-off-by:
-
Sven Eckelmann authored
Signed-off-by:
-
Markus Elfring authored
Let us split a check for a condition at the beginning of the batadv_is_ap_isolated() function so that a direct return can be performed in this function if the variable "vlan" contained a null pointer. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
The batadv_softif_vlan_free_ref() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
* Let us return directly if a call of the batadv_orig_hash_find() function returned a null pointer. * Omit the initialisation for the variable "skb" at the beginning. * Replace an assignment by a call of the kfree_skb() function and delete the affected variable "ret" then. Signed-off-by:
-
Markus Elfring authored
The kfree_skb() function tests whether its argument is NULL and then returns immediately. Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Sven Eckelmann authored
The code to convert the throughput information from a string to the batman-adv internal (100Kibit/s) representation is duplicated in batadv_parse_gw_bandwidth. Move this functionality to its own function batadv_parse_throughput to reduce the code complexity. Signed-off-by:
Sven Eckelmann <sven@open-mesh.com> Signed-off-by:
-
Simon Wunderlich authored
Currently, the post function is also called on errors or if there were no changes, which is redundant for the functions currently using these facilities. Signed-off-by:
Simon Wunderlich <simon@open-mesh.com> Signed-off-by:
-
Simon Wunderlich authored
If networks take a long time to come up, e.g. due to lossy links, then the bridge loop avoidance wait time to suppress broadcasts may not wait long enough and detect a backbone before the mesh is brought up. Increasing the wait period further to 60 seconds makes this scenario less likely. Signed-off-by:
-
Simon Wunderlich authored
When bridge loop avoidance is disabled through sysfs, the internal datastructures are not disabled, but only BLA operations are disabled. To be sure that they are removed, purge the data immediately. That is especially useful if a firmwares network state is changed, and the BLA wait periods should restart on the new network. Signed-off-by:
-
