* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: Propagate LOCALVERSION= down to scripts/setlocalversion
  kbuild: Clean up and speed up the localversion logic

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Cure nr_iowait_cpu() users
  init: Fix comment
  init, sched: Fix race between init and kthreadd

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Fix syndrome calculation on K8

When calculating the DCT channel from the syndrome we need to know the
syndrome type (x4 vs x8). On F10h, this is read out from extended PCI
cfg space register F3x180 while on K8 we only support x4 syndromes and
don't have extended PCI config space anyway.

Make the code accessing F3x180 F10h only and fall back to x4 syndromes
on everything else.

Cc: <stable@kernel.org> # .33.x .34.x
Reported-by: Jeffrey Merkey <jeffmerkey@gmail.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

Conflicts:
	Makefile

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: fix page flip finish vs. prepare on plane B
  drm/i915: change default panel fitting mode to preserve aspect ratio
  drm/i915: fix uninitialized variable warning in i915_setup_compression()
  drm/i915: take struct_mutex in i915_dma_cleanup()
  drm/i915: Fix CRT hotplug regression in 2.6.35-rc1
  i915: fix ironlake edp panel setup (v4)
  drm/i915: don't access FW_BLC_SELF on 965G
  drm/i915: Account for space on the ring buffer consumed whilst wrapping.
  drm/i915: gen3 page flipping fixes
  drm/i915: don't queue flips during a flip pending event
  drm/i915: Fix incorrect intel_ring_begin size in BSD ringbuffer.
  drm/i915: Turn on 945 self-refresh only if single CRTC is active
  drm/i915/gen4: Fix interrupt setup ordering
  drm/i915: Use RSEN instead of HTPLG for tfp410 monitor detection.
  drm/i915: Move non-phys cursors into the GTT
  Revert "drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on)."

(Included the "fix page flip finish vs.  prepare on plane B" patch from
Jesse on top of the pull request from Eric.   -- Linus)

The refreshed patch had a copy & paste bug.
Reported-by: Simon Farnsworth <simon.farnsworth@onelan.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1
  ahci,ata_generic: let ata_generic handle new MBP w/ MCP89
  libahci: Fix bug in storing EM messages

When booting 2.6.35-rc3 on a x86 system without an ERST ACPI table with
the 'quiet' option, we still observe an "ERST: Table is not found!"
warning.

Quiesce it to the same info log level as the other 'table not found'
warnings.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 4bdadb97 ("drm/i915:
Selectively enable self-reclaim"), we've been passing GFP_MOVABLE to the
i915 page allocator where we weren't before due to some over-eager
removal of the page mapping gfp_flags games the code used to play.

This caused hibernate on Intel hardware to result in a lot of memory
corruptions on resume.  See for example

  http://bugzilla.kernel.org/show_bug.cgi?id=13811

Reported-by: Evengi Golov (in bugzilla)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: M. Vefa Bicakci <bicave@superonline.com>
Cc: stable@kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We did this a long time ago in the DDX driver, but now this fix belongs
in the kernel.

Preserving the aspect ratio is a nicer default.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=18033.
Tested-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

Fixes:

drivers/gpu/drm/i915/i915_dma.c: In function ‘i915_setup_compression’:
drivers/gpu/drm/i915/i915_dma.c:1311: error: ‘compressed_llb’ may be used uninitialized in this function
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

intel_cleanup_ring_buffer() calls drm_gem_object_unreference() (as
opposed to drm_gem_object_unreference_unlocked()) so it needs to be
called with "struct_mutex" held.  If we don't hold the lock, it triggers
a BUG_ON(!mutex_is_locked(&dev->struct_mutex));

I also audited the other places that call intel_cleanup_ring_buffer()
and they all hold the lock so they're OK.

This was introduced in: 8187a2b7 "drm/i915: introduce
intel_ring_buffer structure (V2)" and it's a regression from v2.6.34.

Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=16247Signed-off-by: Dan Carpenter <error27@gmail.com>
Reported-by: Benny Halevy <bhalevy@panasas.com>
Tested-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

Commit 7a772c49 has two bugs which
made the hotplug problems on my laptop worse instead of better.

First, it did not, in fact, disable the CRT plug interrupt -- it
disabled all the other hotplug interrupts.  It seems rather doubtful
that that bit of the patch fixed anything, so let's just remove it.
(If you want to add it back, you probably meant ~CRT_HOTPLUG_INT_EN.)

Second, on at least my GM45, setting CRT_HOTPLUG_ACTIVATION_PERIOD_64
and CRT_HOTPLUG_VOLTAGE_COMPARE_50 (when they were previously unset)
causes a hotplug interrupt about three seconds later.  The old code
never restored PORT_HOTPLUG_EN so this could only happen once, but
they new code restores those registers.  So just set those bits when
we set up the interrupt in the first place.
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Eric Anholt <eric@anholt.net>

The eDP spec claims a 20% overhead for the 8:10 encoding scheme used
on the wire. Take this into account when picking the lane/clock speed
for the panel.

v3: some panels are out of spec, try our best to deal with them, don't
refuse modes on eDP panels, and try the largest allowed settings if
all else fails on eDP.
v4: fix stupid typo, forgot to git add before amending.

Fixes several reports in bugzilla:

      https://bugs.freedesktop.org/show_bug.cgi?id=28070Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

The register offset for FW_BLC_SELF is a totally different set of bits
on Broadwater (it's actually MI_RDRET_STATE), so don't treat it like
FW_BLC_SELF on 965G chips.

Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=26874.

Cc: stable@kernel.org
Tested-by: Norman Yarvin <yarvin@yarchive.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

If we fill the tail of the physical ring buffer with NOOP when wrapping,
we need to account for the reduction in available space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

IDE mode of MCP89 on MBP 7,1 doesn't set DMA enable bits in the BMDMA
status register.  Make the following changes to work around the problem.

* Instead of using hard coded 1 in id->driver_data as class code
  match, use ATA_GEN_CLASS_MATCH and carry the matched id in
  host->private_data.

* Instead of matching PCI_VENDOR_ID_CENATEK, use ATA_GEN_FORCE_DMA
  flag in id instead.

* Add ATA_GEN_FORCE_DMA to the id entry of MBP 7,1.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peer Chen <pchen@nvidia.com>
Cc: stable@kernel.org
Reported-by: Anders Østhus <grapz666@gmail.com>
Reported-by: Andreas Graf <andreas_graf@csgraf.de>
Reported-by: Benoit Gschwind <gschwind@gnu-log.net>
Reported-by: Damien Cassou <damien.cassou@gmail.com>
Reported-by: tixetsal@juno.com
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

For yet unknown reason, MCP89 on MBP 7,1 doesn't work w/ ahci under
linux but the controller doesn't require explicit mode setting and
works fine with ata_generic.  Make ahci ignore the controller on MBP
7,1 and let ata_generic take it for now.

Reported in bko#15923.

  https://bugzilla.kernel.org/show_bug.cgi?id=15923

NVIDIA is investigating why ahci mode doesn't work.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peer Chen <pchen@nvidia.com>
Cc: stable@kernel.org
Reported-by: Anders Østhus <grapz666@gmail.com>
Reported-by: Andreas Graf <andreas_graf@csgraf.de>
Reported-by: Benoit Gschwind <gschwind@gnu-log.net>
Reported-by: Damien Cassou <damien.cassou@gmail.com>
Reported-by: tixetsal@juno.com
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

In function ahci_store_em_buffer(), if the input (signed char*) buffer
contains negative data, the constructed 32-bit long message data may
be wrong.
Signed-off-by: Harry Zhang <harry.zhang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: docs: add an entry for imx2_wdt

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits)
  drm/radeon/kms: remove rv100 bios connector quirk
  drm/radeon/kms/pm: fix power state indexing on igp chips in dynpm mode
  DRM / radeon / KMS: Fix hibernation regression related to radeon PM (was: Re: [Regression, post-2.6.34] Hibernation broken on machines with radeon/KMS and r300)
  drm/radeon/kms/igp: fix possible divide by 0 in bandwidth code (v2)
  drm/radeon: add quirk to make HP nx6125 laptop resume.
  drm/radeon/kms: add some missing regs to evergreen gpu init
  drm/radeon/kms: fix typos in evergreen command checker
  drm/radeon/kms: avoid oops on mac r4xx cards
  fb: fix colliding defines for fb flags.
  drm/radeon/kms: Force HDP_NONSURF to maximum size
  drm/radeon/kms: disable frac fb dividers for rs6xx
  drm/radeon/kms: don't read attempt to read bios from VRAM on unposted GPU.
  drm/radeon/kms: fix typo in evergreen_gpu_init
  drm/radeon/kms: return ret in cursor_set failure path
  drm/ttm: non pooled page allocation should have GFP_USER set
  drm/radeon/r100/r200: fix calculation of compressed cube maps
  drm/radeon/r200: handle more hw tex coord types
  drm/radeon/kms: CS checker texture fixes for r1xx/r2xx/r3xx
  drm/radeon: add fake RN50 table for powerpc
  drm/fb: Fix video= mode computation
  ...

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix spinaphore down_spin()

Add an entry for imx2_wdt in watchdog-parameters.txt
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Commit 0224cf4c (sched: Intoduce get_cpu_iowait_time_us())
broke things by not making sure preemption was indeed disabled
by the callers of nr_iowait_cpu() which took the iowait value of
the current cpu.

This resulted in a heap of preempt warnings. Cure this by making
nr_iowait_cpu() take a cpu number and fix up the callers to pass
in the right number.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-pm@lists.linux-foundation.org
LKML-Reference: <1277968037.1868.120.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Some RV100 cards with 2 VGA ports show up with DVI+VGA, however
some boards with DVI+VGA have the same subsystem ids. Better
to have a VGA port show up as DVI than having a non-useable
DVI port.

reported by DHR in irc.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28745Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

DRM / radeon / KMS: Fix hibernation regression related to radeon PM (was: Re: [Regression, post-2.6.34] Hibernation broken on machines with radeon/KMS and r300)

There is a regression from 2.6.34 related to the recent radeon power
management changes, caused by attempting to cancel a delayed work
item that's never been scheduled.  However, the code as is has some
other issues potentially leading to visible problems.

First, the mutex around cancel_delayed_work() in radeon_pm_suspend()
doesn't really serve any purpose, because cancel_delayed_work() only
tries to delete the work's timer.  Moreover, it doesn't prevent the
work handler from running, so the handler can do some wrong things if
it wins the race and in that case it will rearm itself to do some
more wrong things going forward.  So, I think it's better to wait for
the handler to return in case it's already been queued up for
execution.  Also, it should be prevented from rearming itself in that
case.

Second, in radeon_set_pm_method() the cancel_delayed_work() is not
sufficient to prevent the work handler from running and queing up
itself for the next run (the failure scenario is that
cancel_delayed_work() returns 0, so the handler is run, it waits on
the mutex and then rearms itself after the mutex has been released),
so again the work handler should be prevented from rearming itself in
that case..

Finally, there's a potential deadlock in radeon_pm_fini(), because
cancel_delayed_work_sync() is called under rdev->pm.mutex, but the
work handler tries to acquire the same mutex (if it wins the race).

Fix the issues described above.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Some IGP systems specify the system memory clock in the Firmware
table rather than the IGP info table.  Check both and make sure
we have a value system memory clock value.

v2: make sure rs690_pm_info is called on rs780/rs880 as well.

fixes a regression since 07d4190327b02ab3aaad25a2d168f79d92e8f8c2.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

For some reason on resume, executing the BIOS scripts locks up the whole chipset, by avoiding the dynclk table the machine resumes properly and seems to function okay.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

They don't have an atombios so don't attempt to use it for
eng/mem clocks.

Reported by spoonb on #radeon
fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28671Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

When I added the flags I must have been using a 25 line terminal and missed the following flags.

The collided with flag has one user in staging despite being in-tree for 5 years.

I'm happy to push this via my drm tree unless someone really wants to do it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@kernel.org

HDP non surface should cover the whole VRAM but we were misscomputing
the size and we endup in some case not covering the VRAM at all (if
VRAM size were > 1G). Covering more than the VRAM size shouldn't be
an issue.

Fix : https://bugs.freedesktop.org/show_bug.cgi?id=28016

[airlied: add evergreen fix]
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Should fix fdo bug 28331:
https://bugs.freedesktop.org/show_bug.cgi?id=28331Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Since the VGA switcheroo, we'd attempt to read the BIOS from VRAM on startup
but on some unposted cards this can cause hangs/crashes.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28592

(further problem pointed out by agd5f on IGP systems)

Reported-by: Reilithion on #radeon
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

We were returning 0 in both the success and failure paths. Noticed while
investigating FDO bug 26403.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Non pooled page allocation should have GFP_USER set so allocation
can wait and reclaim page from other process (ie non atomic).
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>