- 04 Jul, 2017 20 commits
-
-
Amir Goldstein authored
Bad index entries are entries whose name does not match the origin file handle stored in trusted.overlay.origin xattr. Bad index entries could be a result of a system power off in the middle of copy up. Stale index entries are entries whose origin file handle is stale. Stale index entries could be a result of copying layers or removing lower entries while the overlay is not mounted. The case of copying layers should be detected earlier by the verification of upper root dir origin and index dir origin. Both bad and stale index entries are detected and removed on mount. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Amir Goldstein authored
When inodes index feature is enabled, lookup in indexdir for the index entry of lower real inode or copy up origin inode. The index entry name is the hex representation of the lower inode file handle. If the index dentry in negative, then either no lower aliases have been copied up yet, or aliases have been copied up in older kernels and are not indexed. If the index dentry for a copy up origin inode is positive, but points to an inode different than the upper inode, then either the upper inode has been copied up and not indexed or it was indexed, but since then index dir was cleared. Either way, that index cannot be used to indentify the overlay inode. If a positive dentry that matches the upper inode was found, then it is safe to use the copy up origin st_ino for upper hardlinks, because all indexed upper hardlinks are represented by the same overlay inode as the copy up origin. Set the INDEX type flag on an indexed upper dentry. A non-upper dentry may also have a positive index from copy up of another lower hardlink. This situation will be handled by following patches. Index lookup is going to be used to prevent breaking hardlinks on copy up. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Amir Goldstein authored
An index dir contains persistent hardlinks to files in upper dir. Therefore, we must never mount an existing index dir with a differnt upper dir. Store the upper root dir file handle in index dir inode when index dir is created and verify the file handle before using an existing index dir on mount. Add an 'is_upper' flag to the overlay file handle encoding and set it when encoding the upper root file handle. This is not critical for index dir verification, but it is good practice towards a standard overlayfs file handle format for NFS export. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Amir Goldstein authored
When inodes index feature is enabled, verify that the file handle stored in upper root dir matches the lower root dir or fail to mount. If upper root dir has no stored file handle, encode and store the lower root dir file handle in overlay.origin xattr. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Amir Goldstein authored
Create the index dir on mount. The index dir will contain hardlinks to upper inodes, named after the hex representation of their origin lower inodes. The index dir is going to be used to prevent breaking lower hardlinks on copy up and to implement overlayfs NFS export. Because the feature is not fully backward compat, enabling the feature is opt-in by config/module/mount option. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Amir Goldstein authored
Pass in the subdir name to create and specify if subdir is persistent or if it should be cleaned up on every mount. Move fallback to readonly mount on failure to create dir and print of error message into the helper. This function is going to be used for creating the persistent 'index' dir under workbasedir. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Amir Goldstein authored
For the case of all layers not on the same fs, try to decode the copy up origin file handle on any of the lower layers. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Amir Goldstein authored
Bad things can happen if several concurrent overlay mounts try to use the same upperdir/workdir path. Try to get the 'inuse' advisory lock on upperdir and workdir. Fail mount if another overlay mount instance or another user holds the 'inuse' lock on these directories. Note that this provides no protection for concurrent overlay mount that use overlapping (i.e. descendant) upper/work dirs. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Amir Goldstein authored
Added an i_state flag I_INUSE and helpers to set/clear/test the bit. The 'inuse' lock is an 'advisory' inode lock, that can be used to extend exclusive create protection beyond parent->i_mutex lock among cooperating users. This is going to be used by overlayfs to get exclusive ownership on upper and work dirs among overlayfs mounts. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Miklos Szeredi authored
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Amir Goldstein authored
Use the new ovl_inode mutex to synchonize concurrent copy up instead of the super block copy up workqueue. Moving the synchronization object from the overlay dentry to the overlay inode is needed for synchonizing concurrent copy up of lower hardlinks to the same upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Miklos Szeredi authored
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Miklos Szeredi authored
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Miklos Szeredi authored
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Miklos Szeredi authored
When checking for consistency in directory operations (unlink, rename, etc.) match inodes not dentries. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Miklos Szeredi authored
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Miklos Szeredi authored
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Amir Goldstein authored
We need some more space to store overlay inode data in memory, so allocate overlay inodes from a slab of struct ovl_inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
Amir Goldstein authored
This patch fixes an overlay inode nlink leak in the case where ovl_rename() renames over a non-dir. This is not so critical, because overlay inode doesn't rely on nlink dropping to zero for inode deletion. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
git://git.infradead.org/users/hch/uuidMiklos Szeredi authored
UUID/GUID updates: - introduce the new uuid_t/guid_t types that are going to replace the somewhat confusing uuid_be/uuid_le types and make the terminology fit the various specs, as well as the userspace libuuid library. (me, based on a previous version from Amir) - consolidated generic uuid/guid helper functions lifted from XFS and libnvdimm (Amir and me) - conversions to the new types and helpers (Amir, Andy and me)
-
- 28 Jun, 2017 2 commits
-
-
Miklos Szeredi authored
When copying up a file that has multiple hard links we need to break any association with the origin file. This makes copy-up be essentially an atomic replace. The new file has nothing to do with the old one (except having the same data and metadata initially), so don't set the overlay.origin attribute. We can relax this in the future when we are able to index upper object by origin. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 3a1e819b ("ovl: store file handle of lower inode on copy up")
-
Miklos Szeredi authored
Nothing prevents mischief on upper layer while we are busy copying up the data. Move the lookup right before the looked up dentry is actually used. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 01ad3eb8 ("ovl: concurrent copy up of regular files") Cc: <stable@vger.kernel.org> # v4.11
-
- 27 Jun, 2017 1 commit
-
-
kbuild test robot authored
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
- 26 Jun, 2017 1 commit
-
-
Linus Torvalds authored
-
- 25 Jun, 2017 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix to unbreak the vdso32 build for 64bit kernels caused by excess #includes in the mshyperv header" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mshyperv: Remove excess #includes from mshyperv.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A few fixes for timekeeping and timers: - Plug a subtle race due to a missing READ_ONCE() in the timekeeping code where reloading of a pointer results in an inconsistent callback argument being supplied to the clocksource->read function. - Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the time keeping core code, to prevent a possible discontuity. - Apply a similar fix to the arm64 vdso clock_gettime() implementation - Add missing includes to clocksource drivers, which relied on indirect includes which fails in certain configs. - Use the proper iomem pointer for read/iounmap in a probe function" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting time: Fix clock->read(clock) race around clocksource changes clocksource: Explicitly include linux/clocksource.h when needed clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Three fixlets for perf: - Return the proper error code if aux buffers for a event are not supported. - Calculate the probe offset for inlined functions correctly - Update the Skylake DTLB load/store miss event so it can count 1G TLB entries as well" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf probe: Fix probe definition for inlined functions perf/x86/intel: Add 1G DTLB load/store miss support for SKL perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single fix for the MIPS GIC to prevent ftrace recursion" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips-gic: Mark count and compare accessors notrace
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: - a quirk to i8042 to ignore timeout bit on Lifebook AH544 - a fixup to Synaptics RMI function 54 that was breaking some Dells - a fix for memory leak in soc_button_array driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - only read the F54 query registers which are used Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list Input: soc_button_array - fix leaking the ACPI button descriptor buffer
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "Here are the target-pending fixes for v4.12-rc7 that have been queued up for the last 2 weeks. This includes: - Fix a TMR related kref underflow detected by the recent refcount_t conversion in upstream. - Fix a iscsi-target corner case during explicit connection logout timeout failure. - Address last fallout in iscsi-target immediate data handling from v4.4 target-core now allowing control CDB payload underflow" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Reject immediate data underflow larger than SCSI transfer length iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP target: Fix kref->refcount underflow in transport_cmd_finish_abort
-
- 24 Jun, 2017 10 commits
-
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: "Nothing scary, just some random fixes: - fix warnings of host programs - fix "make tags" when COMPILED_SOURCE=1 is specified along with O= - clarify help message of C=1 option - fix dependency for ncurses compatibility check - fix "make headers_install" for fakechroot environment" * tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: fix sparse warnings in nconfig kbuild: fix header installation under fakechroot environment kconfig: Check for libncurses before menuconfig Kbuild: tiny correction on `make help` tags: honor COMPILED_SOURCE with apart output directory genksyms: add printf format attribute to error_with_pos()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull timer fix from Eric Biederman: "This fixes an issue of confusing injected signals with the signals from posix timers that has existed since posix timers have been in the kernel. This patch is slightly simpler than my earlier version of this patch as I discovered in testing that I had misspelled "#ifdef CONFIG_POSIX_TIMERS". So I deleted that unnecessary test and made setting of resched_timer uncondtional. I have tested this and verified that without this patch there is a nasty hang that is easy to trigger, and with this patch everything works properly" Thomas Gleixner dixit: "It fixes the problem at hand and covers the ptrace case as well, which I missed. Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de>" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Only reschedule timers on signals timers have sent
-
Thomas Gleixner authored
A recent commit included linux/slab.h in linux/irq.h. This breaks the build of vdso32 on a 64-bit kernel. The reason is that linux/irq.h gets included into the vdso code via linux/interrupt.h which is included from asm/mshyperv.h. That makes the 32-bit vdso compile fail, because slab.h includes the pgtable headers for 64-bit on a 64-bit build. Neither linux/clocksource.h nor linux/interrupt.h are needed in the mshyperv.h header file itself - it has a dependency on <linux/atomic.h>. Remove the includes and unbreak the build. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: devel@linuxdriverproject.org Fixes: dee863b5 ("hv: export current Hyper-V clocksource") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanosSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 4.12. Most of these actually came in last week but got held up for some more testing. - three fixes for kprobes/ftrace/livepatch interactions. - properly handle data breakpoints when using the Radix MMU. - fix for perf sampling of registers during call_usermodehelper(). - properly initialise the thread_info on our emergency stacks - add an explicit flush when doing TLB invalidations for a process using NPU2. Thanks to: Alistair Popple, Naveen N. Rao, Nicholas Piggin, Ravi Bangoria, Masami Hiramatsu" * tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64: Initialise thread_info for emergency stacks powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD powerpc/perf: Fix oops when kthread execs user process powerpc/64s: Handle data breakpoints in Radix mode powerpc/kprobes: Skip livepatch_handler() for jprobes powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS powerpc/kprobes: Pause function_graph tracing during jprobes handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "This fixes the ACPI-based enumeration of some I2C and SPI devices broken in 4.11. Specifics: - I2C and SPI devices are expected to be enumerated by the I2C and SPI subsystems, respectively, but due to a change made during the 4.11 cycle, in some cases the ACPI core marks them as already enumerated which causes the I2C and SPI subsystems to overlook them, so fix that (Jarkko Nikula)" * tag 'acpi-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / scan: Fix enumeration for special SPI and I2C devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fix from Wolfram Sang. * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx: Use correct function to write to register
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fix from Linus Walleij: "A single GPIO patch fixing the compatible string for the MVEBU PWM controller embedded in the GPIO controller before we release v4.12. Hopefully" * tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mvebu: change compatible string for PWM support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Nothing exciting here, just a few stable fixes: - suppress spurious kernel WARNING in PCM core - fix potential spin deadlock at error handling in firewire - HD-audio PCI ID addition / fixup" * tag 'sound-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Apply quirks to Broxton-T, too ALSA: firewire-lib: Fix stall of process context at packet error ALSA: pcm: Don't treat NULL chmap as a fatal error ALSA: hda - Add Coffelake PCI ID
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A varied bunch of fixes, one for an API regression with connectors. Otherwise amdgpu and i915 have a bunch of varied fixes, the shrinker ones being the most important" * tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux: drm: Fix GETCONNECTOR regression drm/radeon: add a quirk for Toshiba Satellite L20-183 drm/radeon: add a PX quirk for another K53TK variant drm/amdgpu: adjust default display clock drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating drm/amdgpu: add Polaris12 DID drm/i915: Don't enable backlight at setup time. drm/i915: Plumb the correct acquire ctx into intel_crtc_disable_noatomic() drm/i915: Fix deadlock witha the pipe A quirk during resume drm/i915: Remove __GFP_NORETRY from our buffer allocator drm/i915: Encourage our shrinker more when our shmemfs allocations fails drm/i915: Differentiate between sw write location into ring and last hw read
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull random fixes from Ted Ts'o: "Fix some locking and gcc optimization issues from the most recent random_for_linus_stable pull request" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: silence compiler warnings and fix race
-