We can allow modules to be loaded into the vmalloc region, where they
should also benefit from the same protections as those loaded into
the more efficient module region.  Allow these functions to operate
there as well.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The set_memory_*() bounds checks are buggy on several fronts:

1. They fail to round the region size up if the passed address is not
   page aligned.
2. The region check was incomplete, and didn't correspond with what
   was being asked of apply_to_page_range()

So, rework change_memory_common() to fix these problems, adding an
"in_region()" helper to determine whether the start & size fit within
the provided region start and stop addresses.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

This reverts commit 4dd1837d.

Moving the exports for assembly code into the assembly files breaks
KSYM trimming, but also breaks modversions.

While fixing the KSYM trimming is trivial, fixing modversions brings
us to a technically worse position that we had prior to the above
change:

- We end up with the prototype definitions divorsed from everything
  else, which means that adding or removing assembly level ksyms
  become more fragile:
  * if adding a new assembly ksyms export, a missed prototype in
    asm-prototypes.h results in a successful build if no module in
    the selected configuration makes use of the symbol.
  * when removing a ksyms export, asm-prototypes.h will get forgotten,
    with armksyms.c, you'll get a build error if you forget to touch
    the file.

- We end up with the same amount of include files and prototypes,
  they're just in a header file instead of a .c file with their
  exports.

As for lines of code, we don't get much of a size reduction:
 (original commit)
 47 files changed, 131 insertions(+), 208 deletions(-)
 (fix for ksyms trimming)
 7 files changed, 18 insertions(+), 5 deletions(-)
 (two fixes for modversions)
 1 file changed, 34 insertions(+)
 3 files changed, 7 insertions(+), 2 deletions(-)
which results in a net total of only 25 lines deleted.

As there does not seem to be much benefit from this change of approach,
revert the change.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Unlike clk_register_clkdev(), clk_hw_register_clkdev() doesn't check for
passed error objects from a previous registration call. Hence the caller
of clk_hw_register_*() has to check for errors before calling
clk_hw_register_clkdev*().

Make clk_hw_register_clkdev() more similar to clk_register_clkdev() by
adding this error check, removing the burden from callers that do mass
registration.

Fixes: e4f1b49b ("clkdev: Add clk_hw based registration APIs")
Fixes: 944b9a41 ("clk: ls1x: Migrate to clk_hw based OF and registration APIs")
Fixes: 44ce9a9a ("MIPS: TXx9: Convert to Common Clock Framework")
Fixes: f48d947a ("clk: clps711x: Migrate to clk_hw based OF and registration APIs")
Fixes: b4626a7f ("CLK: Add Loongson1C clock support")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This is good for consistency even if there is no difference in compiled
code. LTO might rely on this eventually. No need to preserve the extern
attribute as it is the default with function prototypes.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add a sysfs cpu_capacity attribute with which it is possible to read and
write (thus over-writing default values) CPUs capacity. This might be
useful in situations where values needs changing after boot.

The new attribute shows up as:

 /sys/devices/system/cpu/cpu*/cpu_capacity
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

With the introduction of cpu capacity-dmips-mhz bindings, CPU capacities
can now be calculated from values extracted from DT and information
coming from cpufreq. Add parsing of DT information at boot time, and
complement it with cpufreq information. We keep code that can produce
same information, based on different DT properties and hard-coded
values, as fall-back for backward compatibility.

Caveat: the information provided by this patch will start to be used in
the future. We need to #define arch_scale_cpu_capacity to something
provided in arch, so that scheduler's default implementation (which gets
used if arch_scale_cpu_capacity is not defined) is overwritten.
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Commit 7619751f ("ARM: 8595/2: apply more __ro_after_init") caused
a regression with XIP kernels by moving the __ro_after_init data into
the read-only section.  With XIP kernels, the read-only section is
located in read-only memory from the very beginning.

Work around this by moving the __ro_after_init data back into the .data
section, which will be in RAM, and hence will be writable.

It should be noted that in doing so, this remains writable after init.

Fixes: 7619751f ("ARM: 8595/2: apply more __ro_after_init")
Reported-by: Andrea Merello <andrea.merello@gmail.com>
Tested-by: Andrea Merello <andrea.merello@gmail.com> [ XIP stm32 ]
Tested-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The UniPhier outer cache (arch/arm/mm/cache-uniphier.c) has 128 byte
line length and its tags are also managed per 128 byte line.  This
is very unfortunate, but the current 64 byte alignment for kmalloc()
causes sharing problems on DMA if used with this outer cache.

This commit adds ARM_L1_CACHE_SHIFT_7 to increase the DMA minimum
alignment to 128 byte if CACHE_UNIPHIER is enabled.  There are
several drivers that assume aligning to L1_CACHE_BYTES will be DMA
safe, so this commit also changes the L1_CACHE_BYTES for safety.

Having said that, I hesitate to align all the other SoCs in Multi
platform to the UniPhier's requirement.  So, I am disabling the
CONFIG_CACHE_UNIPHIER by default, so that multi_v7_defconfig will
still stay with CONFIG_ARM_L1_CACHE_SHIFT=6.  With this commit,
UniPhier SoCs will become slower, but it is much better than system
crash.  If desired, the outer-cache can be enabled by merge_config
or something.

Note:
The UniPhier PH1-Pro5 SoC is equipped also with L3 cache with 256
byte line size but its tags are managed per 128 byte sub-line.
So, ARM_L1_CACHE_SHIFT_7 should be fine for all the UniPhier SoCs.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

fs_initcall is definitely too late to initialize DMA-debug hash tables,
because some drivers might get probed and use DMA mapping framework
already in core_initcall. Late initialization of DMA-debug results in
false warning about accessing memory, that was not allocated, like this
one:
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1 at lib/dma-debug.c:1104 check_unmap+0xa1c/0xe50
exynos-sysmmu 10a60000.sysmmu: DMA-API: device driver tries to free DMA memory it has not allocated [device
address=0x000000006ebd0000] [size=16384 bytes]
Modules linked in:
CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc5-00028-g39dde3d-dirty #44
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c0119dd4>] (unwind_backtrace) from [<c01122bc>] (show_stack+0x20/0x24)
[<c01122bc>] (show_stack) from [<c062714c>] (dump_stack+0x84/0xa0)
[<c062714c>] (dump_stack) from [<c0132560>] (__warn+0x14c/0x180)
[<c0132560>] (__warn) from [<c01325dc>] (warn_slowpath_fmt+0x48/0x50)
[<c01325dc>] (warn_slowpath_fmt) from [<c06814f8>] (check_unmap+0xa1c/0xe50)
[<c06814f8>] (check_unmap) from [<c06819c4>] (debug_dma_unmap_page+0x98/0xc8)
[<c06819c4>] (debug_dma_unmap_page) from [<c076c3e8>] (exynos_iommu_domain_free+0x158/0x380)
[<c076c3e8>] (exynos_iommu_domain_free) from [<c0764a30>] (iommu_domain_free+0x34/0x60)
[<c0764a30>] (iommu_domain_free) from [<c011f168>] (release_iommu_mapping+0x30/0xb8)
[<c011f168>] (release_iommu_mapping) from [<c011f23c>] (arm_iommu_release_mapping+0x4c/0x50)
[<c011f23c>] (arm_iommu_release_mapping) from [<c0b061ac>] (s5p_mfc_probe+0x640/0x80c)
[<c0b061ac>] (s5p_mfc_probe) from [<c07e6750>] (platform_drv_probe+0x70/0x148)
[<c07e6750>] (platform_drv_probe) from [<c07e25c0>] (driver_probe_device+0x12c/0x6b0)
[<c07e25c0>] (driver_probe_device) from [<c07e2c6c>] (__driver_attach+0x128/0x17c)
[<c07e2c6c>] (__driver_attach) from [<c07df74c>] (bus_for_each_dev+0x88/0xc8)
[<c07df74c>] (bus_for_each_dev) from [<c07e1b6c>] (driver_attach+0x34/0x58)
[<c07e1b6c>] (driver_attach) from [<c07e1350>] (bus_add_driver+0x18c/0x32c)
[<c07e1350>] (bus_add_driver) from [<c07e4198>] (driver_register+0x98/0x148)
[<c07e4198>] (driver_register) from [<c07e5cb0>] (__platform_driver_register+0x58/0x74)
[<c07e5cb0>] (__platform_driver_register) from [<c174cb30>] (s5p_mfc_driver_init+0x1c/0x20)
[<c174cb30>] (s5p_mfc_driver_init) from [<c0102690>] (do_one_initcall+0x64/0x258)
[<c0102690>] (do_one_initcall) from [<c17014c0>] (kernel_init_freeable+0x3d0/0x4d0)
[<c17014c0>] (kernel_init_freeable) from [<c116eeb4>] (kernel_init+0x18/0x134)
[<c116eeb4>] (kernel_init) from [<c010bbd8>] (ret_from_fork+0x14/0x3c)
---[ end trace dc54c54bd3581296 ]---

This patch moves initialization of DMA-debug to core_initcall. This is
safe from the initialization perspective. dma_debug_do_init() internally calls
debugfs functions and debugfs also gets initialised at core_initcall(), and
that is earlier than arch code in the link order, so it will get initialized
just before the DMA-debug.
Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

There is no .text.init sections.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Recent kernels have changed their behaviour to be more inconsistent
when handling printk continuations.  With todays kernels, the output
looks sane on the console, but dmesg splits individual printk()s which
do not have the KERN_CONT prefix into separate lines.

Since the assembly code is not trivial to add the KERN_CONT, and we
ideally want to avoid using KERN_CONT (as multiple printk()s can race
between different threads), convert the assembly dumping the register
values to C code, and have the C code build the output a line at a
time before dumping to the console.

This avoids the KERN_CONT issue, and also avoids situations where the
output is intermixed with other console activity.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

It's been a while since the mach-types file was updated, as we have
moved away to DT for platform stuff.  Updating it has the advantage of
retiring lots of entries which have not been made use of, resulting in
rougly halving the size of the file.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Remove the completely unused SA-1101 header file.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Explain where the value for UDELAY_MULT and UDELAY_SHIFT come from.
Also fix/clarify some comments pertaining to their usage in the
assembly code.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Wire up the new pkey syscalls for ARM.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Alexander Shiyan reports that CLPS711x fails at boot time in the data
exception handler due to a NULL pointer dereference.  This is caused by
the late-v4t abort handler overwriting R9 (which becomes zero).  Fix
this by making the abort handler save and restore R9.

Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = c3b58000
[00000008] *pgd=800000000, *pte=00000000, *ppte=feff4140
Internal error: Oops: 63c11817 [#1] PREEMPT ARM
CPU: 0 PID: 448 Comm: ash Not tainted 4.8.1+ #1
Hardware name: Cirrus Logic CLPS711X (Device Tree Support)
task: c39e03a0 ti: c3b4e000 task.ti: c3b4e000
PC is at __dabt_svc+0x4c/0x60
LR is at do_page_fault+0x144/0x2ac
pc : [<c000d3ac>]    lr : [<c000fcec>]    psr: 60000093
sp : c3b4fe6c  ip : 00000001  fp : b6f1bf88
r10: c387a5a0  r9 : 00000000  r8 : e4e0e001
r7 : bee3ef83  r6 : 00100000  r5 : 80000013  r4 : c022fcf8
r3 : 00000000  r2 : 00000008  r1 : bf000000  r0 : 00000000
Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0000217f  Table: c3b58055  DAC: 00000055
Process ash (pid: 448, stack limit = 0xc3b4e190)
Stack: (0xc3b4fe6c to 0xc3b50000)
fe60:                            bee3ef83 c05168d1 ffffffff 00000000 c3adfe80
fe80: c3a03300 00000000 c3b4fed0 c3a03400 bee3ef83 c387a5a0 b6f1bf88 00000001
fea0: c3b4febc 00000076 c022fcf8 80000013 ffffffff 0000003f bf000000 bee3ef83
fec0: 00000004 00000000 c3adfe80 c00e432c 00000812 00000005 00000001 00000006
fee0: b6f1b000 00000000 00010000 0003c944 0004d000 0004d439 00010000 b6f1b000
ff00: 00000005 00000000 00015ecc c3b4fed0 0000000a 00000000 00000000 c00a1dc0
ff20: befff000 c3a03300 c3b4e000 c0507cd8 c0508024 fffffff8 c3a03300 00000000
ff40: c0516a58 c00a35bc c39e03a0 000001c0 bea84ce8 0004e008 c3b3a000 c00a3ac0
ff60: c3b40374 c3b3a000 bea84d11 00000000 c0500188 bea84d11 bea84ce8 00000001
ff80: 0000000b c000a304 c3b4e000 00000000 bea84ce4 c00a3cd0 00000000 bea84d11
ffa0: bea84ce8 c000a160 bea84d11 bea84ce8 bea84d11 bea84ce8 0004e008 0004d450
ffc0: bea84d11 bea84ce8 00000001 0000000b b6f45ee4 00000000 b6f5ff70 bea84ce4
ffe0: b6f2f130 bea84cb0 b6f2f194 b6ef29f4 a0000010 bea84d11 02c7cffa 02c7cffd
[<c000d3ac>] (__dabt_svc) from [<c022fcf8>] (__copy_to_user_std+0xf8/0x330)
[<c022fcf8>] (__copy_to_user_std) from [<c00e432c>]
+(load_elf_binary+0x920/0x107c)
[<c00e432c>] (load_elf_binary) from [<c00a35bc>]
+(search_binary_handler+0x80/0x16c)
[<c00a35bc>] (search_binary_handler) from [<c00a3ac0>]
+(do_execveat_common+0x418/0x600)
[<c00a3ac0>] (do_execveat_common) from [<c00a3cd0>] (do_execve+0x28/0x30)
[<c00a3cd0>] (do_execve) from [<c000a160>] (ret_fast_syscall+0x0/0x30)
Code: e1a0200d eb00136b e321f093 e59d104c (e5891008)
---[ end trace 4b4f8086ebef98c5 ]---

Fixes: e6978e4b ("ARM: save and reset the address limit when entering an exception")
Reported-by: Alexander Shiyan <shc_work@mail.ru>
Tested-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Pull befs fixes from Luis de Bethencourt:
 "I recently took maintainership of the befs file system [0]. This is
  the first time I send you a git pull request, so please let me know if
  all the below is OK.

  Salah Triki and myself have been cleaning the code and fixing a few
  small bugs.

  Sorry I couldn't send this sooner in the merge window, I was waiting
  to have my GPG key signed by kernel members at ELCE in Berlin a few
  days ago."

[0] https://lkml.org/lkml/2016/7/27/502

* tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befs: (39 commits)
  befs: befs: fix style issues in datastream.c
  befs: improve documentation in datastream.c
  befs: fix typos in datastream.c
  befs: fix typos in btree.c
  befs: fix style issues in super.c
  befs: fix comment style
  befs: add check for ag_shift in superblock
  befs: dump inode_size superblock information
  befs: remove unnecessary initialization
  befs: fix typo in befs_sb_info
  befs: add flags field to validate superblock state
  befs: fix typo in befs_find_key
  befs: remove unused BEFS_BT_PARMATCH
  fs: befs: remove ret variable
  fs: befs: remove in vain variable assignment
  fs: befs: remove unnecessary *befs_sb variable
  fs: befs: remove useless initialization to zero
  fs: befs: remove in vain variable assignment
  fs: befs: Insert NULL inode to dentry
  fs: befs: Remove useless calls to brelse in befs_find_brun_dblindirect
  ...

Pull gcc plugins update from Kees Cook:
 "This adds a new gcc plugin named "latent_entropy". It is designed to
  extract as much possible uncertainty from a running system at boot
  time as possible, hoping to capitalize on any possible variation in
  CPU operation (due to runtime data differences, hardware differences,
  SMP ordering, thermal timing variation, cache behavior, etc).

  At the very least, this plugin is a much more comprehensive example
  for how to manipulate kernel code using the gcc plugin internals"

* tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  latent_entropy: Mark functions with __latent_entropy
  gcc-plugins: Add latent_entropy plugin

Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...

Pull sound fixes from Takashi Iwai:
 "Just a few trivial small fixes"

* tag 'sound-fix-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: line6: fix a crash in line6_hwdep_write()
  ALSA: seq: fix passing wrong pointer in function call of compatibility layer
  ALSA: hda - Fix a failure of micmute led when having multi adcs
  ALSA: line6: Fix POD X3 Live audio input

Pull more misc uaccess and vfs updates from Al Viro:
 "The rest of the stuff from -next (more uaccess work) + assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  score: traps: Add missing include file to fix build error
  fs/super.c: don't fool lockdep in freeze_super() and thaw_super() paths
  fs/super.c: fix race between freeze_super() and thaw_super()
  overlayfs: Fix setting IOP_XATTR flag
  iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector()
  blackfin: no access_ok() for __copy_{to,from}_user()
  arm64: don't zero in __copy_from_user{,_inatomic}
  arm: don't zero in __copy_from_user_inatomic()/__copy_from_user()
  arc: don't leak bits of kernel stack into coredump
  alpha: get rid of tail-zeroing in __copy_user()

Pull cifs fixes from Steve French:
 "Including:

   - nine bug fixes for stable. Some of these we found at the recent two
     weeks of SMB3 test events/plugfests.

   - significant improvements in reconnection (e.g. if server or network
     crashes) especially when mounted with "persistenthandles" or to
     server which advertises Continuous Availability on the share.

   - a new mount option "idsfromsid" which improves POSIX compatibility
     in some cases (when winbind not configured e.g.) by better (and
     faster) fetching uid/gid from acl (when "cifsacl" mount option is
     enabled). NB: we are almost complete work on "cifsacl" (querying
     mode/uid/gid from ACL) for SMB3, but SMB3 support for cifsacl is
     not included in this set.

   - improved handling for SMB3 "credits" (even if server is buggy)

  Still working on two sets of changes:

   - cifsacl enablement for SMB3

   - cleanup of RFC1001 length calculation (so we can handle encryption
     and multichannel and RDMA)

  And a couple of new bugs were reported recently (unrelated to above)
  so will probably have another merge request next week"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
  CIFS: Retrieve uid and gid from special sid if enabled
  CIFS: Add new mount option to set owner uid and gid from special sids in acl
  CIFS: Reset read oplock to NONE if we have mandatory locks after reopen
  CIFS: Fix persistent handles re-opening on reconnect
  SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup
  SMB2: Separate Kerberos authentication from SMB2_sess_setup
  Expose cifs module parameters in sysfs
  Cleanup missing frees on some ioctls
  Enable previous version support
  Do not send SMB3 SET_INFO request if nothing is changing
  SMB3: Add mount parameter to allow user to override max credits
  fs/cifs: reopen persistent handles on reconnect
  Clarify locking of cifs file and tcon structures and make more granular
  Fix regression which breaks DFS mounting
  fs/cifs: keep guid when assigning fid to fileinfo
  SMB3: GUIDs should be constructed as random but valid uuids
  Set previous session id correctly on SMB3 reconnect
  cifs: Limit the overall credit acquired
  Display number of credits available
  Add way to query creation time of file via cifs xattr
  ...

Pull btrfs fixes from Chris Mason:
 "Some fixes from Omar and Dave Sterba for our new free space tree.

  This isn't heavily used yet, but as we move toward making it the new
  default we wanted to nail down an endian bug"

* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: tests: uninline member definitions in free_space_extent
  btrfs: tests: constify free space extent specs
  Btrfs: expand free space tree sanity tests to catch endianness bug
  Btrfs: fix extent buffer bitmap tests on big-endian systems
  Btrfs: catch invalid free space trees
  Btrfs: fix mount -o clear_cache,space_cache=v2
  Btrfs: fix free space tree bitmaps on big-endian systems

score images fail to build as follows.

arch/score/kernel/traps.c: In function 'show_stack':
arch/score/kernel/traps.c:55:3: error:
	implicit declaration of function '__get_user'

__get_user() is declared in asm/uaccess.h, which was previously included
through asm/module.h.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 88dd4a74 ("score: separate extable.h, switch module.h to it")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sb_wait_write()->percpu_rwsem_release() fools lockdep to avoid the
false-positives. Now that xfs was fixed by Dave's commit dbad7c99
("xfs: stop holding ILOCK over filldir callbacks") we can remove it and
change freeze_super() and thaw_super() to run with s_writers.rw_sem locks
held; we add two trivial helpers for that, lockdep_sb_freeze_release()
and lockdep_sb_freeze_acquire().

xfstests-dev/check `grep -il freeze tests/*/???` does not trigger any
warning from lockdep.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull overlayfs updates from Miklos Szeredi:
 "This update contains fixes to the "use mounter's permission to access
  underlying layers" area, and miscellaneous other fixes and cleanups.

  No new features this time"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: use vfs_get_link()
  vfs: add vfs_get_link() helper
  ovl: use generic_readlink
  ovl: explain error values when removing acl from workdir
  ovl: Fix info leak in ovl_lookup_temp()
  ovl: during copy up, switch to mounter's creds early
  ovl: lookup: do getxattr with mounter's permission
  ovl: copy_up_xattr(): use strnlen

Change thaw_super() to check frozen != SB_FREEZE_COMPLETE rather than
frozen == SB_UNFROZEN, otherwise it can race with freeze_super() which
drops sb->s_umount after SB_FREEZE_WRITE to preserve the lock ordering.

In this case thaw_super() will wrongly call s_op->unfreeze_fs() before
it was actually frozen, and call sb_freeze_unlock() which leads to the
unbalanced percpu_up_write(). Unfortunately lockdep can't detect this,
so this triggers misc BUG_ON()'s in kernel/rcu/sync.c.
Reported-and-tested-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ovl_fill_super calls ovl_new_inode to create a root inode for the new
superblock before initializing sb->s_xattr.  This wrongly causes
IOP_XATTR to be cleared in i_opflags of the new inode, causing SELinux
to log the following message:

  SELinux: (dev overlay, type overlay) has no xattr support

Fix this by initializing sb->s_xattr and similar fields before calling
ovl_new_inode.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Both import_iovec() and rw_copy_check_uvector() take an array
(typically small and on-stack) which is used to hold an iovec array copy
from userspace. This is to avoid an expensive memory allocation in the
fast path (i.e. few iovec elements).

The caller may have to check whether these functions actually used
the provided buffer or allocated a new one -- but this differs between
the too. Let's just add a kernel doc to clarify what the semantics are
for each function.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This update consists of:

   - Fixes and improvements to existing tests

   - Moving code from Documentation to selftests, samples, and tools:

     * Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and
       networking tests from Documentation to selftests.

     * Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay,
       and blackfin examples from Documentation to samples.

     * Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from
       Documentation to tools.

     * Deletes BUILD_DOCSRC and its dependencies"

* tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits)
  selftests/futex: Check ANSI terminal color support
  Doc: update 00-INDEX files to reflect the runnable code move
  samples: move blackfin gptimers-example from Documentation
  tools: move pcmcia crc32hash tool from Documentation
  tools: move laptops dslm tool from Documentation
  tools: move accounting tool from Documentation
  samples: move auxdisplay example code from Documentation
  samples: move watchdog example code from Documentation
  samples: move timers example code from Documentation
  samples: move misc-devices/mei example code from Documentation
  samples: move mic/mpssd example code from Documentation
  selftests: Move networking/timestamping from Documentation
  selftests: move watchdog tests from Documentation/watchdog
  selftests: move ia64 tests from Documentation/ia64
  selftests: move vDSO tests from Documentation/vDSO
  selftests: move ptp tests from Documentation/ptp
  selftests: move prctl tests from Documentation/prctl
  selftests: move dnotify_test from Documentation/filesystems
  selftests/timers: Add missing error code assignment before test
  selftests/zram: replace ZRAM_LZ4_COMPRESS
  ...

Pull misc kbuild changes from Michal Marek:
 "Just a few patches on the kbuild.git#misc branch this time:

   - New Coccinelle patch by Nicholas Mc Guire
   - Existing patch fixes by Julia Lawall
   - Minor comment fix by Markus Elfring"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Coccinelle: flag conditions with no effect
  scripts/coccicheck: Update reference for the corresponding documentation
  Coccinelle: pm_runtime: ensure relevance of pm_runtime reports
  Coccinelle: limit memdup_user transformation to GFP_KERNEL case

Pull kbuild updates from Michal Marek:

 - EXPORT_SYMBOL for asm source by Al Viro.

   This does bring a regression, because genksyms no longer generates
   checksums for these symbols (CONFIG_MODVERSIONS). Nick Piggin is
   working on a patch to fix this.

   Plus, we are talking about functions like strcpy(), which rarely
   change prototypes.

 - Fixes for PPC fallout of the above by Stephen Rothwell and Nick
   Piggin

 - fixdep speedup by Alexey Dobriyan.

 - preparatory work by Nick Piggin to allow architectures to build with
   -ffunction-sections, -fdata-sections and --gc-sections

 - CONFIG_THIN_ARCHIVES support by Stephen Rothwell

 - fix for filenames with colons in the initramfs source by me.

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (22 commits)
  initramfs: Escape colons in depfile
  ppc: there is no clear_pages to export
  powerpc/64: whitelist unresolved modversions CRCs
  kbuild: -ffunction-sections fix for archs with conflicting sections
  kbuild: add arch specific post-link Makefile
  kbuild: allow archs to select link dead code/data elimination
  kbuild: allow architectures to use thin archives instead of ld -r
  kbuild: Regenerate genksyms lexer
  kbuild: genksyms fix for typeof handling
  fixdep: faster CONFIG_ search
  ia64: move exports to definitions
  sparc32: debride memcpy.S a bit
  [sparc] unify 32bit and 64bit string.h
  sparc: move exports to definitions
  ppc: move exports to definitions
  arm: move exports to definitions
  s390: move exports to definitions
  m68k: move exports to definitions
  alpha: move exports to actual definitions
  x86: move exports to actual definitions
  ...

Pull one more documentation update from Jonathan Corbet:
 "A single commit converting the mac80211 DocBook template over to
  Sphinx.  Only 32 more to go..."

* tag 'docs-4.9-2' of git://git.lwn.net/linux:
  docs-rst: sphinxify 802.11 documentation

Pull rdma qedr RoCE driver from Doug Ledford:
 "Early on in the merge window I mentioned I had a backlog of new
  drivers waiting to be reviewed and that, in addition to the hns-roce
  driver, I wanted to get possible a couple more reviewed. I ended up
  only having the time to complete one of the additional drivers.

  During Dave Miller's pull request this go around, there were a series
  of 9 patches to the QLogic qed net driver that add basic support for a
  paired RoCE driver. That support is currently not functional because
  it is missing the matching RoCE driver in the RDMA subsystem. I
  managed to finish that review. However, because it goes against part
  of Dave's net pull, and a part that was accepted a day or two after
  the merge window opened, to apply cleanly it has to be applied to
  either the tip of Dave's net branch, or as I did in this case, I just
  applied it to your master after you had taken Dave's pull request."

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  qedr: Add events support and register IB device
  qedr: Add GSI support
  qedr: Add LL2 RoCE interface
  qedr: Add support for data path
  qedr: Add support for memory registeration verbs
  qedr: Add support for QP verbs
  qedr: Add support for PD,PKEY and CQ verbs
  qedr: Add support for user context verbs
  qedr: Add support for RoCE HW init
  qedr: Add RoCE driver framework

Pull more rdma updates from Doug Ledford:
 "This merge window was the first where Huawei had to try and coordinate
  their patches between their net driver and their new roce driver
  (similar to mlx4 and mlx5).

  They didn't do horribly, but there were some issues (and we knew that
  because they simply didn't know what to do in the beginning). As a
  result, I had a set of patches that depended on some patches that
  normally would have come to you via Dave's tree. Those patches have
  been on netdev@ for a while, so I got Dave to give me his approval to
  send them to you. As such, the other 29 patches I had behind them are
  also now ready to go.

  This catches the hns and hns-roce drivers up to current, and for
  future patches we are working with them to get them up to speed on how
  to do joint driver development so that they don't have these sorts of
  cross tree dependency issues again. BTW, Dave gave me permission to
  add his Acked-by: to the patches against the net tree, but I've had
  this branch through 0day (but not linux-next since it was off by
  itself) and I didn't want to rebase the series just to add Dave's ack
  for the 8 patches in the net area.

  Updates to the hns drivers:

   - Small patch set for hns net driver that the roce patches depend on

   - Various fixes to the hns-roce driver

   - Add connection manager support to the hns-roce driver"

* tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (36 commits)
  IB/hns: Fix for removal of redundant code
  IB/hns: Delete the redundant lines in hns_roce_v1_m_qp()
  IB/hns: Fix the bug when platform_get_resource() exec fail
  IB/hns: Update the rq head when modify qp state
  IB/hns: Cq has not been freed
  IB/hns: Validate mtu when modified qp
  IB/hns: Some items of qpc need to take user param
  IB/hns: The Ack timeout need a lower limit value
  IB/hns: Return bad wr while post send failed
  IB/hns: Fix bug of memory leakage for registering user mr
  IB/hns: Modify the init of iboe lock
  IB/hns: Optimize code of aeq and ceq interrupt handle and fix the bug of qpn
  IB/hns: Delete the sqp_start from the structure hns_roce_caps
  IB/hns: Fix bug of clear hem
  IB/hns: Remove unused parameter named qp_type
  IB/hns: Simplify function of pd alloc and qp alloc
  IB/hns: Fix bug of using uninit refcount and free
  IB/hns: Remove parameters of resize cq
  IB/hns: Remove unused parameters in some functions
  IB/hns: Add node_guid definition to the bindings document
  ...

Pull some more input subsystem updates from Dmitry Torokhov:
 "An update to the ALPS driver to support the V8 protocol with
  touchstick, a change for i8042 to skip selftest on many Asus laptops
  which helps to keep their touchpads working after resume, and a couple
  other driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - skip selftest on ASUS laptops
  Input: melfas_mip4 - add ic_name sysfs attribute
  Input: melfas_mip4 - add maintainer information
  Input: melfas_mip4 - add devicetree binding documentations
  Input: elantech - add Fujitsu Lifebook E556 to force crc_enabled
  Input: synaptics-rmi4 - fix error handling in I2C transport driver
  Input: synaptics-rmi4 - fix error handling in SPI transport driver
  Input: ALPS - add V8 protocol documentation
  Input: ALPS - set DualPoint flag for 74 03 28 devices
  Input: ALPS - allow touchsticks to report pressure
  Input: ALPS - handle 0-pressure 1F events
  Input: ALPS - add touchstick support for SS5 hardware
  Input: elantech - force needed quirks on Fujitsu H760
  Input: elantech - fix Lenovo version typo