- 08 Dec, 2017 37 commits
-
-
Arnd Bergmann authored
time_to_tm() takes a time_t value that overflows in 2038 on 32-bit systems. time64_to_tm() doesn't have this problem, so let's use that in combination with ktime_get_real_seconds() to read a 64-bit time value. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Dan Carpenter authored
The cam->buffers[] array has cam->num_frames elements so the > needs to be changed to >= to avoid going beyond the end of the array. The ->buffers[] array is allocated in cpia2_allocate_buffers() if you want to confirm. Fixes: ab33d507 ("V4L/DVB (3376): Add cpia2 camera support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Martin Kepplinger authored
According to i.MX VPU API Reference Manuals the MJPG video codec is referenced to by number 7, not 3. Also Philipp pointed out that this value is only meant to fill in CMD_ENC_SEQ_COD_STD for encoding, only on i.MX53. It was never written to any register, and even if defined correctly, wouldn't be needed for i.MX6. So avoid confusion and remove this definition. Signed-off-by:
Martin Kepplinger <martink@posteo.de> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Gustavo A. R. Silva authored
Fix inconsistent IS_ERR and PTR_ERR in csi_link_validate. The proper pointer to be passed as argument is sensor. This issue was detected with the help of Coccinelle. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Hans Verkuil authored
When the device is being unregistered disable the hardware, don't wait until cec_delete_adapter is called as the hardware may have disappeared by then. This would be the case for hotplugable devices. Signed-off-by:
Bård Eirik Winther <bwinther@cisco.com> Tested-by:
-
Hans Verkuil authored
Document what this op does. Signed-off-by:
-
Hans Verkuil authored
Some devices can monitor the CEC pin using an interrupt, but you only want to enable the interrupt if you actually switch to pin monitoring mode. So add a new op that is called when pin monitoring needs to be switched on or off. Also fix a small bug where the initial CEC pin event was sent again when calling S_MODE twice with the same CEC_MODE_MONITOR_PIN mode. Signed-off-by:
-
Arnd Bergmann authored
The firmware timestamp is an unsigned 32-bit value, but we copy it into a signed 32-bit variable, so we can theoretically get an overflow in the calculation when the timestamp is between 2038 and 2106. This changes the temporary variable to time64_t and changes the deprecated time_to_tm() over to time64_to_tm() accordingly. There is still an overflow in y2106, but that is a limitation of the firmware interface, not a kernel problem. Signed-off-by:
-
Hans Verkuil authored
Add support for the test_pattern control and the h/vflip controls. This makes it possible to switch to more interesting test patterns and to test control handling in v4l-subdevs. There are more tpg-related controls that can be added, but this is a good start. Signed-off-by:
-
Dean A authored
fixes intermittent soft reboot issue with firmware load increases wait time of reset, as required by HW Signed-off-by:Dean Anderson <dean@sensoray.com> Signed-off-by:
-
Arvind Yadav authored
kasprintf() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Kieran Bingham authored
When used as part of a display pipeline, the VSP is stopped and restarted explicitly by the DU from its suspend and resume handlers. There is thus no need to stop or restart pipelines in the VSP suspend and resume handlers, and doing so would cause the hardware to be left in a misconfigured state. Ensure that the VSP suspend and resume handlers do not affect DRM-based pipelines. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
It's not clear if the transmit status that is printed when debugging is enabled is hex or decimal. Add 0x prefix to make this explicit. Signed-off-by:
-
Hans Verkuil authored
A 'return' was missing when detecting Arbitration Lost and calling transmit_done. With the return transmit_done could be called a second time, confusing the CEC framework. Luckily the Arbitration Lost condition is very rare. Signed-off-by:
-
Ian Jamison authored
It is possible to call STREAMON without the minimum number of buffers queued. In this case the vb2_queue state will be set to streaming but the start_streaming vb2_op will not be called. Later when enough buffers are queued, start_streaming will be called but vb2_is_streaming will already return true. Also removed the queue state check in stop_streaming since it's not valid there either. Signed-off-by:
Ian Jamison <ian.dev@arkver.com> Reviewed-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by:
-
Stanimir Varbanov authored
This change fixes the calculation of B-frames and GOP size by adopt v4l2 controls with the firmware interface expectations. Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Romain Reignier authored
Note that the inputs for the Composite and S-Video are inverted in regard to most of the other boards using a cx231xx chip. Signed-off-by:
Romain Reignier <r.reignier@robopec.com> Signed-off-by:
-
Andy Shevchenko authored
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
-
Andy Shevchenko authored
Since i2c_unregister_device() became NULL-aware we may remove duplicate checks. Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Colin Ian King authored
The pointer h is already initialized to codeclist_top so the second identical assignment is redundant and can be removed. Cleans up clang warning: drivers/media/pci/zoran/videocodec.c:322:21: warning: Value stored to 'h' during its initialization is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Variable mask is being set to 0x80 and then set to this value again in the following for-loop. Remove the extraneous first setting of mask. Cleans up clang warning: drivers/media/pci/pt3/pt3_i2c.c:88:2: warning: Value stored to 'mask' is never read Signed-off-by:
-
Jérémy Lefaure authored
Using the ARRAY_SIZE macro improves the readability of the code. Also, it is not always useful to use a variable to store this constant calculated at compile time. Found with Coccinelle with the following semantic patch: @r depends on (org || report)@ type T; T[] E; position p; @@ ( (sizeof(E)@p /sizeof(*E)) | (sizeof(E)@p /sizeof(E[...])) | (sizeof(E)@p /sizeof(T)) ) Signed-off-by:
Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Reviewed-by:
Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Joe Perches authored
Use a more typical logging style. The current macro hides the gspca_dev argument so add it to the macro uses instead. Miscellanea: o Add missing '\n' terminations to formats o Realign arguments to open parenthesis o Remove commented out uses of PDEBUG Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Use a more typical kernel logging style. The current macro hides the gspca_dev argument so add it to the macro uses instead. Miscellanea: o Add missing '\n' terminations to formats o Realign arguments to open parenthesis Signed-off-by:
-
Dan Carpenter authored
We free the stk_camera device too early. It's allocate first in probe and it should be freed last in stk_camera_disconnect(). Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Arvind Yadav authored
Here, hdpvr_register_videodev() is responsible for setup and register a video device. Also defining and initializing a worker. hdpvr_register_videodev() is calling by hdpvr_probe at last. So no need to flush any work here. Unregister v4l2, free buffers and memory. If hdpvr_probe() will fail. Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only u8 array buf on the stack at run time but instead make it static const; makes object code smaller saving over 480 bytes: Before: text data bss dec hex filename 33030 65936 192 99158 18356 drivers/media/usb/dvb-usb/cxusb.o After: text data bss dec hex filename 32446 66032 192 98670 1816e drivers/media/usb/dvb-usb/cxusb.o Signed-off-by:
-
Arnd Bergmann authored
When building without CONFIG_GPIOLIB, we get a harmless warning about an unused variable: drivers/media/pci/solo6x10/solo6x10-gpio.c: In function 'solo_gpio_init': drivers/media/pci/solo6x10/solo6x10-gpio.c:165:6: error: unused variable 'ret' [-Werror=unused-variable] This adds another #ifdef around the declaration. Fixes: d3202d19 ("media: solo6x10: export hardware GPIO pins 8:31 to gpiolib interface") Signed-off-by:
Ismael Luceno <ismael@iodev.co.uk> Acked-by:
Anton Sviridenko <anton@corp.bluecherry.net> Signed-off-by:
-
Colin Ian King authored
Don't populate the arrays RegAddr on the stack, instead make them static const. Makes the object code smaller by over 980 bytes: Before: text data bss dec hex filename 64923 304 0 65227 fecb drivers/media/tuners/mxl5005s.o After: text data bss dec hex filename 63779 464 0 64243 faf3 drivers/media/tuners/mxl5005s.o Signed-off-by:
-
Srishti Sharma authored
Use BIT(x) instead of (1<<x). Signed-off-by:
Srishti Sharma <srishtishar@gmail.com> Signed-off-by:
-
Srishti Sharma authored
Use WARN_ON() instead of BUG_ON() to avoid crashing the kernel. Signed-off-by:
-
Kieran Bingham authored
The current implementation has to search the list of controls for the pixel rate control, each time it is set. This can be optimised easily by storing the ctrl pointer in the CSI/TX object, and referencing that directly. While at it, fix up a missing blank line also highlighted in review comments. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
-
Alexey Khoroshilov authored
mt9v032_power_on() leaves clk enabled in case of errors, but it is not expected by its callers. There is a similar problem in mt9v032_registered(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Akinobu Mita authored
The ov7670 has the test pattern generator features. This makes use of it through V4L2_CID_TEST_PATTERN control. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
The sub-device for ov7670 is registered by v4l2_async_register_subdev(). So it should be unregistered by v4l2_async_unregister_subdev() instead of v4l2_device_unregister_subdev(). Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Pavel Machek authored
Connect voice coil lens to the camera sensor, so that it can be used by camera applications. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Pali Rohár <pali.rohar@gmail.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
-
Pavel Machek authored
Document dts support of LED/focus. Signed-off-by:
-
- 30 Nov, 2017 3 commits
-
-
Sakari Ailus authored
Add the missing MAINTAINERS entry for imx274, fix error handling in driver probe and unregister the correct control handler in driver remove. Signed-off-by:
-
Niklas Söderlund authored
When matching and registering a sub-device from a sub-notifier use the v4l2_device from the root parent notifier. Using the v4l2_dev stored in the sub-notifier itself is incorrect as it might not be set. This can be demonstrated by unbinding and rebinding the adv748x driver and observing that it fails to probe due to the check !v4l2_dev in v4l2_device_register_subdev(). # echo 4-0070 > /sys/bus/i2c/drivers/adv748x/unbind # echo 4-0070 > /sys/bus/i2c/drivers/adv748x/bind adv748x 4-0070: chip found @ 0xe0 revision 2143 adv748x 4-0070: Failed to probe TXA adv748x: probe of 4-0070 failed with error -22 Looking at the commit which adds sub-notifiers to V4L2 it looks like this is the intended behavior of the original commit. With this fix the adv748x can be re-bound and still function properly. Fixes: 2cab00bb ("media: v4l: async: Allow binding notifiers to sub-devices") Signed-off-by: -
Tomasz Figa authored
Current implementation of __v4l2_async_notifier_parse_fwnode_endpoints() checks first whether subdev_count >= subdev_max and only then whether the port being parsed matches the given port index. This triggers an error in otherwise valid cases of skipping ports that do not match. Fix this by moving the check below the port index check. Fixes: 9ca46531 ("media: v4l: fwnode: Support generic parsing of graph endpoints in a device") Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
