- 26 Sep, 2018 9 commits
-
-
Leonard Crestez authored
Adding lcdif nodes to a power domain currently results in black/corrupted screens or hangs because power is not correctly enabled when required. Ensure power is on when display is active by adding pm_runtime_get/put_sync to mxsfb_pipe_enable/disable. Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Stefan Agner <stefan@agner.ch> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Leonard Crestez authored
LCDIF will repeatedly display data from CUR_BUF and set CUR_BUF to NEXT_BUF when done. Since we are only ever writing to NEXT_BUF the display will show an initial corrupt frame. Fix by writing the FB paddr to both CUR_BUF and NEXT_BUF when activating the CRTC. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
-
Leonard Crestez authored
The main axi clk is disabled at the end of mxsfb_crtc_mode_set_nofb and immediately reenabled in mxsfb_enable_controller. Avoid this by moving the handling of axi clk one level up to mxsfb_crtc_enable. Do the same for mxsfb_crtc_disable for symmetry. This shouldn't have any functional effect. Signed-off-by:
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180926115640.24755-1-tzimmermann@suse.de
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
-
Sean Paul authored
Another "small driver" moving into drm-misc. Stefan has also offered to co-maintain it. Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
-
Ezequiel Garcia authored
Implement vmap/vunmap so we can export dmabufs to other drivers, such as video4linux. Tested with a virtio-gpu / vivid (virtual capture driver) pipeline, where the vivid driver imports the dmabufs exported by virtio-gpu. Note that dma_buf_vmap() does its own vmap counting, so it's not needed to take care of it in the driver. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180925161606.17980-4-ezequiel@collabora.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Ezequiel Garcia authored
Currently, virtio_gpu_object_kmap() is only called by virtio_gpufb_create(), when a DRM framebuffer is created. Thus, instead of returning the vmap'ed address, emit a warning if virtio_gpu_object_kmap is called on an already mapped object. With this change, kmap/kunmap calls are now balanced. Signed-off-by:
-
Ezequiel Garcia authored
Implement a virtio_gpu_object_kunmap() to unmap the kernel mapping, and use it in the TTM object destroy path. Signed-off-by:
-
- 25 Sep, 2018 16 commits
-
-
Gerd Hoffmann authored
Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-7-kraxel@redhat.com
-
Gerd Hoffmann authored
Use DRM_FORMAT_HOST_XRGB8888, so we are using the correct format code on bigendian machines. Also set the quirk_addfb_prefer_host_byte_order mode_config bit so drm_mode_addfb() asks for the correct format code. Both DRM_FORMAT_* and VIRTIO_GPU_FORMAT_* are defined to be little endian, so using a different mapping on bigendian machines is wrong. It's there because of broken drm_mode_addfb() behavior. So with drm_mode_addfb() being fixed we can fix this too. While wading through the code I've noticed we have a little issue in virtio: We attach a format to the bo when it is created (DRM_IOCTL_MODE_CREATE_DUMB), not when we map it as framebuffer (DRM_IOCTL_MODE_ADDFB). Easy way out: Support a single format only. Pick DRM_FORMAT_HOST_XRGB8888, it is the only one actually used in practice. Drop unused mappings in virtio_gpu_translate_format(). With this patch applied both ADDFB and ADDFB2 ioctls work correctly in the virtio-gpu.ko driver on big endian machines. Without the patch only ADDFB (which still seems to be used by the majority of userspace) works correctly. Signed-off-by:
-
Gerd Hoffmann authored
Add bochs_hw_set_*_endian() helper functions, to set the framebuffer byteorder at mode set time. Support both DRM_FORMAT_XRGB8888 and DRM_FORMAT_BGRX8888 framebuffer formats, no matter what the native machine byte order is. Signed-off-by:
-
Gerd Hoffmann authored
Use DRM_FORMAT_HOST_XRGB8888, so we are using the correct format code on bigendian machines. Also set the quirk_addfb_prefer_host_byte_order mode_config bit so drm_mode_addfb() asks for the correct format code. Create our own plane and use drm_crtc_init_with_planes() instead of depending on the default created by drm_crtc_init(). That way the plane format list is correct on bigendian machines. Also re-add the framebuffer format check dropped by "df2052cc bochs: convert to drm_fb_helper_fbdev_setup/teardown". With this patch applied both ADDFB and ADDFB2 ioctls work correctly in the bochs-drm.ko driver on big endian machines. Without the patch only ADDFB (which still seems to be used by the majority of userspace) works correctly. Signed-off-by:
-
Gerd Hoffmann authored
Creating framebuffers for fbdev emulation should use the correct format code too, so switch drm_gem_fbdev_fb_create() over to use the new drm_driver_legacy_fb_format() function. Signed-off-by:
-
Gerd Hoffmann authored
Turns out we need the pixel format fixup not only for the addfb ioctl, but also for fbdev emulation code. Ideally we would place it in drm_mode_legacy_fb_format(). That would create alot of churn though, and most drivers don't care because they never ever run on a big endian platform. So add a new drm_driver_legacy_fb_format() function instead which looks at the mode_config->quirk_addfb_prefer_host_byte_order flag. Signed-off-by:
-
Gerd Hoffmann authored
Pass virtio_gpu_object down to virtio_gpu_cmd_transfer_to_host_2d and virtio_gpu_cmd_transfer_to_host_3d functions, instead of passing just the virtio resource handle. This is needed to lookup the scatter list of the object, for dma sync. Signed-off-by:
Jiandi An <jiandi.an@amd.com> Tested-by:
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Shawn Guo <shawnguo@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-20-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. drm_fbdev_generic_setup() handles mode_config.num_connector being zero. In that case it retries fbdev setup on the next .output_poll_changed. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-19-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-18-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). If drm_fbdev_generic_setup() fails, an error is printed by the function. drm_fbdev_generic_setup() handles mode_config.num_connector being zero. In that case it retries fbdev setup on the next .output_poll_changed. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-14-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. CONFIG_DRM_FBDEV_EMULATION wasn't honoured by the CMA helper, but it is by drm_fb_helper. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-10-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Noralf Trønnes authored
Improve error reporting in drm_fb_helper_fbdev_setup() by printing the error code. This is useful for drivers that choose to not fall over just because fbdev doesen't work, but still wants clues to why it failed. This way they don't have to provide an error message themselves. Signed-off-by:
-
- 21 Sep, 2018 4 commits
-
-
Chris Wilson authored
After schedule() returns 0, we must do one last check of COND to determine the reason for the wakeup with 0 jiffies remaining before reporting the timeout -- otherwise we may lose the signal due to scheduler delays. References: https://bugs.freedesktop.org/show_bug.cgi?id=106690Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920200530.2836-2-chris@chris-wilson.co.ukReviewed-by:
-
Chris Wilson authored
Both the .enable_signaling and .release of the null syncobj fence can be replaced by the default callbacks for a small reduction in code size. In particular the default callback for .release was changed in commit e28bd101 ("drm: rename null fence to stub fence in syncobj v2") which neglected its RCU protection. Fixes: e28bd101 ("drm: rename null fence to stub fence in syncobj v2") Signed-off-by:
-
José Roberto de Souza authored
All DRM_CLIENT capabilities are tied to KMS support, so returning -EOPNOTSUPP when KMS is not supported. v2: returning -EOPNOTSUPP(same value as posix ENOTSUP and available in uapi) instead of -ENOTSUPP v3: adding comments about the feature requirement about capabilities Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Wei Yongjun authored
'vaddr_out' is malloced in _vkms_get_crc() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: db7f419c ("drm/vkms: Compute CRC with Cursor Plane") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
- 20 Sep, 2018 2 commits
-
-
Sean Paul authored
Move udl maintenance into drm-misc tree. I've also signed up to be a reviewer, but have kept it at Odd Fixes level of support. Cc: Dave Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Kieran Bingham authored
Planes without an alpha property, using __drm_atomic_helper_plane_reset will have their plane state alpha initialised as zero, which represents a transparent alpha. If this value is then used for the plane, it may not be visible by default, and thus doesn't represent a good initialisation state. Update the default state->alpha value to DRM_BLEND_ALPHA_OPAQUE unconditionally when the plane is reset. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 19 Sep, 2018 7 commits
-
-
zhong jiang authored
for_each_available_child_of_node will get and put the node properly, the following of_node_put will lead to the double put. So just remove it. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1534472646-10368-1-git-send-email-zhongjiang@huawei.com
-
Lee, Shawn C authored
The N value was computed by kernel driver that based on synchronous clock mode. But only specific N value (0x8000) would be acceptable for LG LP140WF6-SPM1 eDP panel which is running at asynchronous clock mode. With the other N value, Tcon will enter BITS mode and display black screen. Add this panel into quirk database and give particular N value when calculate M/N divider. v2: no update v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-4-git-send-email-shawn.c.lee@intel.com
-
Lee, Shawn C authored
Some DP dongles in particular seem to be fussy about too large link M/N values. Set specific value for N divider can resolve this issue per dongle vendor's comment. So configure N as constant value (0x8000) to instead of reduce M/N formula when specific DP dongle connected. v2: add more comments for issue description and fix typo. v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Tested-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
-
Lee, Shawn C authored
DP quirk list just compare sink or branch device's OUI so far. That means particular vendor's products will be applied specific change. This change would confirm device_id the same or not. Then driver can implement some changes for branch/sink device that really need additional WA. v2: use sizeof instead of hard coded '6' v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Tested-by:
-
Jiandi An authored
With virtio gpu ttm-pages being dma mapped, dma sync is needed when swiotlb is used as bounce buffers, before TRANSFER_TO_HOST_2D/3D commands are sent. Signed-off-by:
-
Icenowy Zheng authored
The R40 SoC has a HDMI PHY that is possible to mux two video PLLs. Add support for it. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180916043409.62374-4-icenowy@aosc.io
-
Icenowy Zheng authored
The Allwinner R40 HDMI PHY is currently the only one that seems to be able to select between two PLL inputs. Add a compatible string for it, and the pll-1 clock input definition. Signed-off-by:
-
- 14 Sep, 2018 2 commits
-
-
Chris Wilson authored
If the ioctl is not supported on a particular piece of HW/driver combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily distinguished from both the lack of the ioctl and from a regular invalid parameter. v2: Across all the kms ioctls we had a mixture of reporting EINVAL, ENODEV and a few ENOTSUPP (most where EINVAL) for a failed drm_core_check_feature(). Update everybody to report ENOTSUPP. v3: ENOTSUPP is an internal errno! It's value (524) does not correspond to a POSIX errno, the one we want is ENOTSUP. However, uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says "ENOTSUP and EOPNOTSUPP have the same value on Linux, but according to POSIX.1 these error values should be distinct." so use EOPNOTSUPP as its equivalent. Signed-off-by:
-
Dan Carpenter authored
We accidentally forgot to set "ret" on this error path so it means we return NULL instead of an error pointer. The caller checks for NULL and changes it to an error pointer so it doesn't cause an issue at run time. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180914065615.GA12043@mwandaSigned-off-by:
-
