- 26 Mar, 2018 22 commits
-
-
Roi Dayan authored
Increase representor netdev RQ size to avoid dropped packets. The current size (two) is just too small to keep up with conventional slow path traffic patterns. Also match the SQ size to the RQ size. Fixes: cb67b832 ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Moshe Shemesh authored
Add check of coalescing parameters received through ethtool are within range of values supported by the HW. Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx5 modify cq limits the coalescing time parameter to 12 bit and coalescing frames parameters to 16 bits. Return out of range error if user tries to set these parameters to higher values. Fixes: f62b8bb8 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
Add dependancy for switchdev to be congfigured as any user-space control plane SW is expected to use the HW switchdev ID to locate the representors related to VFs of a certain PF and apply SW/offloaded switching on them. Fixes: e80541ec ('net/mlx5: Add CONFIG_MLX5_ESWITCH Kconfig') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
SQs are 32 and not 16 bits, hence it's wrong to use only 16 bits to store the sq number for which are going to set steering rule, fix that. Fixes: cb67b832 ('net/mlx5e: Introduce SRIOV VF representors') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Jianbo Liu authored
The vport admin original link state will be re-applied after returning back to legacy mode, it is not right to change the admin link state value when in switchdev mode. Use direct vport commands to alter logical vport state in netdev representor open/close flows rather than the administrative eswitch API. Fixes: 20a1ea67 ('net/mlx5e: Support VF vport link state control for SRIOV switchdev mode') Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Sean Wang authored
It's required to create a modules.alias via MODULE_DEVICE_TABLE helper for the OF platform driver. Otherwise, module autoloading cannot work. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sean Wang authored
MODULE_ALIAS exports information to allow the module to be auto-loaded at boot for the drivers registered using legacy platform registration. However, currently the driver is always used by DT-only platform, MODULE_ALIAS is redundant and should be removed properly. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
We try to hold TX virtqueue mutex in vhost_net_rx_peek_head_len() after RX virtqueue mutex is held in handle_rx(). This requires an appropriate lock nesting notation to calm down deadlock detector. Fixes: 03088137 ("vhost_net: basic polling support") Reported-by: syzbot+7f073540b1384a614e09@syzkaller.appspotmail.com Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Torsten Hilbrich authored
This is needed to support the modem found in HP EliteBook 820 G3. Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
The same fix as in 'bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave' is needed for team driver. The panic can be reproduced easily: ip link add team1 type team ip link set team1 up ip link add link team1 vlan1 type vlan id 80 ip link set vlan1 master team1 Fixes: cb41c997 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Xin Long says: ==================== bonding: a bunch of fixes for dev hwaddr sync in bond_enslave This patchset is mainly to fix a crash when adding vlan as slave of bond which is also the parent link in patch 2/3, and also fix some err process problems in bond_enslave in patch 1/3 and 3/3. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails, dev_set_promiscuity(-1) should be done before going to the err path. Otherwise, dev->promiscuity will leak. Fixes: 7e1a1ac1 ("bonding: Check return of dev_set_promiscuity/allmulti") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Beniamino found a crash when adding vlan as slave of bond which is also the parent link: ip link add bond1 type bond ip link set bond1 up ip link add link bond1 vlan1 type vlan id 80 ip link set vlan1 master bond1 The call trace is as below: [<ffffffffa850842a>] queued_spin_lock_slowpath+0xb/0xf [<ffffffffa8515680>] _raw_spin_lock+0x20/0x30 [<ffffffffa83f6f07>] dev_mc_sync+0x37/0x80 [<ffffffffc08687dc>] vlan_dev_set_rx_mode+0x1c/0x30 [8021q] [<ffffffffa83efd2a>] __dev_set_rx_mode+0x5a/0xa0 [<ffffffffa83f7138>] dev_mc_sync_multiple+0x78/0x80 [<ffffffffc084127c>] bond_enslave+0x67c/0x1190 [bonding] [<ffffffffa8401909>] do_setlink+0x9c9/0xe50 [<ffffffffa8403bf2>] rtnl_newlink+0x522/0x880 [<ffffffffa8403ff7>] rtnetlink_rcv_msg+0xa7/0x260 [<ffffffffa8424ecb>] netlink_rcv_skb+0xab/0xc0 [<ffffffffa83fe498>] rtnetlink_rcv+0x28/0x30 [<ffffffffa8424850>] netlink_unicast+0x170/0x210 [<ffffffffa8424bf8>] netlink_sendmsg+0x308/0x420 [<ffffffffa83cc396>] sock_sendmsg+0xb6/0xf0 This is actually a dead lock caused by sync slave hwaddr from master when the master is the slave's 'slave'. This dead loop check is actually done by netdev_master_upper_dev_link. However, Commit 1f718f0f ("bonding: populate neighbour's private on enslave") moved it after dev_mc_sync. This patch is to fix it by moving dev_mc_sync after master_upper_dev_link, so that this loop check would be earlier than dev_mc_sync. It also moves if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an improvement. Note team driver also has this issue, I will fix it in another patch. Fixes: 1f718f0f ("bonding: populate neighbour's private on enslave") Reported-by: Beniamino Galvani <bgalvani@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
vlan_vids_add_by_dev is called right after dev hwaddr sync, so on the err path it should unsync dev hwaddr. Otherwise, the slave dev's hwaddr will never be unsync when this err happens. Fixes: 1ff412ad ("bonding: change the bond's vlan syncing functions with the standard ones") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
After the qdisc lock was dropped in pfifo_fast we allow multiple enqueue threads and dequeue threads to run in parallel. On the enqueue side the skb bit ooo_okay is used to ensure all related skbs are enqueued in-order. On the dequeue side though there is no similar logic. What we observe is with fewer queues than CPUs it is possible to re-order packets when two instances of __qdisc_run() are running in parallel. Each thread will dequeue a skb and then whichever thread calls the ndo op first will be sent on the wire. This doesn't typically happen because qdisc_run() is usually triggered by the same core that did the enqueue. However, drivers will trigger __netif_schedule() when queues are transitioning from stopped to awake using the netif_tx_wake_* APIs. When this happens netif_schedule() calls qdisc_run() on the same CPU that did the netif_tx_wake_* which is usually done in the interrupt completion context. This CPU is selected with the irq affinity which is unrelated to the enqueue operations. To resolve this we add a RUNNING bit to the qdisc to ensure only a single dequeue per qdisc is running. Enqueue and dequeue operations can still run in parallel and also on multi queue NICs we can still have a dequeue in-flight per qdisc, which is typically per CPU. Fixes: c5ad119f ("net: sched: pfifo_fast use skb_array") Reported-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pawel Dembicki authored
BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. The USB id is added to qmi_wwan.c to allow QMI communication with the BM806U. Tested on 4.14 kernel and OpenWRT. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sanjeev Gupta authored
and switch to https where possible. All links have been eyeballed to verify that the domains have not changed, etc. Signed-off-by: Sanjeev Gupta <ghane0@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2018-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.16 Some fixes for 4.16, only for iwlwifi and brcmfmac this time. All pretty small. iwlwifi * fix an issue with the multicast queue * fix IGTK handling * fix some missing return value checks * add support for a HW workaround for issues on some platforms * a couple of fixes for channel-switch * a few fixes for the aggregation handling code brcmfmac * drop Inter-Access Point Protocol packets by default * fix check for ISO3166 regulatory code ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
While building ipv6 datagram we currently allow arbitrary large extheaders, even beyond pmtu size. The syzbot has found a way to exploit the above to trigger the following splat: kernel BUG at ./include/linux/skbuff.h:2073! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4230 Comm: syzkaller672661 Not tainted 4.16.0-rc2+ #326 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__skb_pull include/linux/skbuff.h:2073 [inline] RIP: 0010:__ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: 0018:ffff8801bc18f0f0 EFLAGS: 00010293 RAX: ffff8801b17400c0 RBX: 0000000000000738 RCX: ffffffff84f01828 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801b415ac18 RBP: ffff8801bc18f360 R08: ffff8801b4576844 R09: 0000000000000000 R10: ffff8801bc18f380 R11: ffffed00367aee4e R12: 00000000000000d6 R13: ffff8801b415a740 R14: dffffc0000000000 R15: ffff8801b45767c0 FS: 0000000001535880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000b000 CR3: 00000001b4123001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6_finish_skb include/net/ipv6.h:969 [inline] udp_v6_push_pending_frames+0x269/0x3b0 net/ipv6/udp.c:1073 udpv6_sendmsg+0x2a96/0x3400 net/ipv6/udp.c:1343 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2046 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2136 SYSC_sendmmsg net/socket.c:2167 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2162 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4404c9 RSP: 002b:00007ffdce35f948 EFLAGS: 00000217 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004404c9 RDX: 0000000000000003 RSI: 0000000020001f00 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000020000080 R11: 0000000000000217 R12: 0000000000401df0 R13: 0000000000401e80 R14: 0000000000000000 R15: 0000000000000000 Code: ff e8 1d 5e b9 fc e9 15 e9 ff ff e8 13 5e b9 fc e9 44 e8 ff ff e8 29 5e b9 fc e9 c0 e6 ff ff e8 3f f3 80 fc 0f 0b e8 38 f3 80 fc <0f> 0b 49 8d 87 80 00 00 00 4d 8d 87 84 00 00 00 48 89 85 20 fe RIP: __skb_pull include/linux/skbuff.h:2073 [inline] RSP: ffff8801bc18f0f0 RIP: __ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: ffff8801bc18f0f0 As stated by RFC 7112 section 5: When a host fragments an IPv6 datagram, it MUST include the entire IPv6 Header Chain in the First Fragment. So this patch addresses the issue dropping datagrams with excessive extheader length. It also updates the error path to report to the calling socket nonnegative pmtu values. The issue apparently predates git history. v1 -> v2: cleanup error path, as per Eric's suggestion Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+91e6f9932ff122fa4410@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Potapenko authored
KMSAN reports use of uninitialized memory in the case when |alen| is smaller than sizeof(struct sockaddr_nl), and therefore |nladdr| isn't fully copied from the userspace. Signed-off-by: Alexander Potapenko <glider@google.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raghuram Chary J authored
Description: EEE does not work with lan7800 when AutoSpeed is not set. (This can happen when EEPROM is not populated or configured incorrectly) Root-Cause: When EEE is enabled, the mac config register ASD is not set i.e. in default state, causing EEE fail. Fix: Set the register when eeprom is not present. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hans Wippel authored
Currently, the SMC experimental TCP option in a SYN packet is lost on the server side when SYN Cookies are active. However, the corresponding SYNACK sent back to the client contains the SMC option. This causes an inconsistent view of the SMC capabilities on the client and server. This patch disables the SMC option in the SYNACK when SYN Cookies are active to avoid this issue. Fixes: 60e2a778 ("tcp: TCP experimental option for SMC") Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Mar, 2018 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Don't pick fixed hash implementation for NFT_SET_EVAL sets, otherwise userspace hits EOPNOTSUPP with valid rules using the meter statement, from Florian Westphal. 2) If you send a batch that flushes the existing ruleset (that contains a NAT chain) and the new ruleset definition comes with a new NAT chain, don't bogusly hit EBUSY. Also from Florian. 3) Missing netlink policy attribute validation, from Florian. 4) Detach conntrack template from skbuff if IP_NODEFRAG is set on, from Paolo Abeni. 5) Cache device names in flowtable object, otherwise we may end up walking over devices going aways given no rtnl_lock is held. 6) Fix incorrect net_device ingress with ingress hooks. 7) Fix crash when trying to read more data than available in UDP packets from the nf_socket infrastructure, from Subash. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Subash Abhinov Kasiviswanathan authored
skb_header_pointer will copy data into a buffer if data is non linear, otherwise it will return a pointer in the linear section of the data. nf_sk_lookup_slow_v{4,6} always copies data of size udphdr but later accesses memory within the size of tcphdr (th->doff) in case of TCP packets. This causes a crash when running with KASAN with the following call stack - BUG: KASAN: stack-out-of-bounds in xt_socket_lookup_slow_v4+0x524/0x718 net/netfilter/xt_socket.c:178 Read of size 2 at addr ffffffe3d417a87c by task syz-executor/28971 CPU: 2 PID: 28971 Comm: syz-executor Tainted: G B W O 4.9.65+ #1 Call trace: [<ffffff9467e8d390>] dump_backtrace+0x0/0x428 arch/arm64/kernel/traps.c:76 [<ffffff9467e8d7e0>] show_stack+0x28/0x38 arch/arm64/kernel/traps.c:226 [<ffffff946842d9b8>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffff946842d9b8>] dump_stack+0xd4/0x124 lib/dump_stack.c:51 [<ffffff946811d4b0>] print_address_description+0x68/0x258 mm/kasan/report.c:248 [<ffffff946811d8c8>] kasan_report_error mm/kasan/report.c:347 [inline] [<ffffff946811d8c8>] kasan_report.part.2+0x228/0x2f0 mm/kasan/report.c:371 [<ffffff946811df44>] kasan_report+0x5c/0x70 mm/kasan/report.c:372 [<ffffff946811bebc>] check_memory_region_inline mm/kasan/kasan.c:308 [inline] [<ffffff946811bebc>] __asan_load2+0x84/0x98 mm/kasan/kasan.c:739 [<ffffff94694d6f04>] __tcp_hdrlen include/linux/tcp.h:35 [inline] [<ffffff94694d6f04>] xt_socket_lookup_slow_v4+0x524/0x718 net/netfilter/xt_socket.c:178 Fix this by copying data into appropriate size headers based on protocol. Fixes: a583636a ("inet: refactor inet[6]_lookup functions to take skb") Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 23 Mar, 2018 16 commits
-
-
Eric Dumazet authored
syzbot reported a LOCKDEP splat [1] in rt6_age_examine_exception() rt6_age_examine_exception() is called while rt6_exception_lock is held. This lock is the lower one in the lock hierarchy, thus we can not call dst_neigh_lookup() function, as it can fallback to neigh_create() We should instead do a pure RCU lookup. As a bonus we avoid a pair of atomic operations on neigh refcount. [1] WARNING: possible circular locking dependency detected 4.16.0-rc4+ #277 Not tainted syz-executor7/4015 is trying to acquire lock: (&ndev->lock){++--}, at: [<00000000416dce19>] __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928 but task is already holding lock: (&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&tbl->lock){++-.}: __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline] _raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312 __neigh_create+0x87e/0x1d90 net/core/neighbour.c:528 neigh_create include/net/neighbour.h:315 [inline] ip6_neigh_lookup+0x9a7/0xba0 net/ipv6/route.c:228 dst_neigh_lookup include/net/dst.h:405 [inline] rt6_age_examine_exception net/ipv6/route.c:1609 [inline] rt6_age_exceptions+0x381/0x660 net/ipv6/route.c:1645 fib6_age+0xfb/0x140 net/ipv6/ip6_fib.c:2033 fib6_clean_node+0x389/0x580 net/ipv6/ip6_fib.c:1919 fib6_walk_continue+0x46c/0x8a0 net/ipv6/ip6_fib.c:1845 fib6_walk+0x91/0xf0 net/ipv6/ip6_fib.c:1893 fib6_clean_tree+0x1e6/0x340 net/ipv6/ip6_fib.c:1970 __fib6_clean_all+0x1f4/0x3a0 net/ipv6/ip6_fib.c:1986 fib6_clean_all net/ipv6/ip6_fib.c:1997 [inline] fib6_run_gc+0x16b/0x3c0 net/ipv6/ip6_fib.c:2053 ndisc_netdev_event+0x3c2/0x4a0 net/ipv6/ndisc.c:1781 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707 call_netdevice_notifiers net/core/dev.c:1725 [inline] __dev_notify_flags+0x262/0x430 net/core/dev.c:6960 dev_change_flags+0xf5/0x140 net/core/dev.c:6994 devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080 inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919 sock_do_ioctl+0xef/0x390 net/socket.c:957 sock_ioctl+0x36b/0x610 net/socket.c:1081 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686 SYSC_ioctl fs/ioctl.c:701 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 -> #2 (rt6_exception_lock){+.-.}: __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:315 [inline] rt6_flush_exceptions+0x21/0x210 net/ipv6/route.c:1367 fib6_del_route net/ipv6/ip6_fib.c:1677 [inline] fib6_del+0x624/0x12c0 net/ipv6/ip6_fib.c:1761 __ip6_del_rt+0xc7/0x120 net/ipv6/route.c:2980 ip6_del_rt+0x132/0x1a0 net/ipv6/route.c:2993 __ipv6_dev_ac_dec+0x3b1/0x600 net/ipv6/anycast.c:332 ipv6_dev_ac_dec net/ipv6/anycast.c:345 [inline] ipv6_sock_ac_close+0x2b4/0x3e0 net/ipv6/anycast.c:200 inet6_release+0x48/0x70 net/ipv6/af_inet6.c:433 sock_release+0x8d/0x1e0 net/socket.c:594 sock_close+0x16/0x20 net/socket.c:1149 __fput+0x327/0x7e0 fs/file_table.c:209 ____fput+0x15/0x20 fs/file_table.c:243 task_work_run+0x199/0x270 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x9bb/0x1ad0 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:968 get_signal+0x73a/0x16d0 kernel/signal.c:2469 do_signal+0x90/0x1e90 arch/x86/kernel/signal.c:809 exit_to_usermode_loop+0x258/0x2f0 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ec/0x940 arch/x86/entry/common.c:292 entry_SYSCALL_64_after_hwframe+0x42/0xb7 -> #1 (&(&tb->tb6_lock)->rlock){+.-.}: __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:315 [inline] __ip6_ins_rt+0x56/0x90 net/ipv6/route.c:1007 ip6_route_add+0x141/0x190 net/ipv6/route.c:2955 addrconf_prefix_route+0x44f/0x620 net/ipv6/addrconf.c:2359 fixup_permanent_addr net/ipv6/addrconf.c:3368 [inline] addrconf_permanent_addr net/ipv6/addrconf.c:3391 [inline] addrconf_notify+0x1ad2/0x2310 net/ipv6/addrconf.c:3460 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707 call_netdevice_notifiers net/core/dev.c:1725 [inline] __dev_notify_flags+0x15d/0x430 net/core/dev.c:6958 dev_change_flags+0xf5/0x140 net/core/dev.c:6994 do_setlink+0xa22/0x3bb0 net/core/rtnetlink.c:2357 rtnl_newlink+0xf37/0x1a50 net/core/rtnetlink.c:2965 rtnetlink_rcv_msg+0x57f/0xb10 net/core/rtnetlink.c:4641 netlink_rcv_skb+0x14b/0x380 net/netlink/af_netlink.c:2444 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4659 netlink_unicast_kernel net/netlink/af_netlink.c:1308 [inline] netlink_unicast+0x4c4/0x6b0 net/netlink/af_netlink.c:1334 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1897 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xca/0x110 net/socket.c:639 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2047 __sys_sendmsg+0xe5/0x210 net/socket.c:2081 SYSC_sendmsg net/socket.c:2092 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2088 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 -> #0 (&ndev->lock){++--}: lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920 __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline] _raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312 __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928 ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961 pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392 pneigh_ifdown net/core/neighbour.c:695 [inline] neigh_ifdown+0x149/0x250 net/core/neighbour.c:294 rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874 addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633 addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707 call_netdevice_notifiers net/core/dev.c:1725 [inline] __dev_notify_flags+0x262/0x430 net/core/dev.c:6960 dev_change_flags+0xf5/0x140 net/core/dev.c:6994 devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080 inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919 packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066 sock_do_ioctl+0xef/0x390 net/socket.c:957 sock_ioctl+0x36b/0x610 net/socket.c:1081 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686 SYSC_ioctl fs/ioctl.c:701 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 other info that might help us debug this: Chain exists of: &ndev->lock --> rt6_exception_lock --> &tbl->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&tbl->lock); lock(rt6_exception_lock); lock(&tbl->lock); lock(&ndev->lock); *** DEADLOCK *** 2 locks held by syz-executor7/4015: #0: (rtnl_mutex){+.+.}, at: [<00000000a2f16daa>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 #1: (&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292 stack backtrace: CPU: 0 PID: 4015 Comm: syz-executor7 Not tainted 4.16.0-rc4+ #277 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_circular_bug.isra.38+0x2cd/0x2dc kernel/locking/lockdep.c:1223 check_prev_add kernel/locking/lockdep.c:1863 [inline] check_prevs_add kernel/locking/lockdep.c:1976 [inline] validate_chain kernel/locking/lockdep.c:2417 [inline] __lock_acquire+0x30a8/0x3e00 kernel/locking/lockdep.c:3431 lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920 __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline] _raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312 __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928 ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961 pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392 pneigh_ifdown net/core/neighbour.c:695 [inline] neigh_ifdown+0x149/0x250 net/core/neighbour.c:294 rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874 addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633 addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707 call_netdevice_notifiers net/core/dev.c:1725 [inline] __dev_notify_flags+0x262/0x430 net/core/dev.c:6960 dev_change_flags+0xf5/0x140 net/core/dev.c:6994 devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080 inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919 packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066 sock_do_ioctl+0xef/0x390 net/socket.c:957 sock_ioctl+0x36b/0x610 net/socket.c:1081 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686 SYSC_ioctl fs/ioctl.c:701 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: c757faa8 ("ipv6: prepare fib6_age() for exception table") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Handle changes to MTU in GRE tunnels Petr says: When offloading GRE tunnels, the MTU setting is kept fixed after the initial offload even as the slow-path configuration changed. Worse: the offloaded MTU setting is actually just a transient value set at the time of NETDEV_REGISTER of the tunnel. As of commit ffc2b6ee ("ip_gre: fix IFLA_MTU ignored on NEWLINK"), that transient value is zero, and unless there's e.g. a VRF migration that prompts re-offload, it stays at zero, and all GRE packets end up trapping. Thus, in patch #1, change the way the MTU is changed post-registration, so that the full event protocol is observed. That way the drivers get to see the change and have a chance to react. In the remaining two patches, implement support for MTU change in mlxsw driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Update MTU of overlay loopback in accordance with the setting on the tunnel netdevice. Fixes: 0063587d ("mlxsw: spectrum: Support decap-only IP-in-IP tunnels") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Move the function so that it can be called without forward declaration from a function that will be added in a follow-up patch. Fixes: 0063587d ("mlxsw: spectrum: Support decap-only IP-in-IP tunnels") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
For tunnels created with IFLA_MTU, MTU of the netdevice is set by rtnl_create_link() (called from rtnl_newlink()) before the device is registered. However without IFLA_MTU that's not done. rtnl_newlink() proceeds by calling struct rtnl_link_ops.newlink, which via ip_tunnel_newlink() calls register_netdevice(), and that emits NETDEV_REGISTER. Thus any listeners that inspect the netdevice get the MTU of 0. After ip_tunnel_newlink() corrects the MTU after registering the netdevice, but since there's no event, the listeners don't get to know about the MTU until something else happens--such as a NETDEV_UP event. That's not ideal. So instead of setting the MTU directly, go through dev_set_mtu(), which takes care of distributing the necessary NETDEV_PRECHANGEMTU and NETDEV_CHANGEMTU events. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, thp: do not cause memcg oom for thp mm/vmscan: wake up flushers for legacy cgroups too Revert "mm: page_alloc: skip over regions of invalid pfns where possible" mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink() mm/thp: do not wait for lock_page() in deferred_split_scan() mm/khugepaged.c: convert VM_BUG_ON() to collapse fail x86/mm: implement free pmd/pte page interfaces mm/vmalloc: add interfaces to free unmapped page table h8300: remove extraneous __BIG_ENDIAN definition hugetlbfs: check for pgoff value overflow lockdep: fix fs_reclaim warning MAINTAINERS: update Mark Fasheh's e-mail mm/mempolicy.c: avoid use uninitialized preferred_node
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "Two regression fixes, two bug fixes for older issues, two fixes for new functionality added this cycle that have userspace ABI concerns, and a small cleanup. These have appeared in a linux-next release and have a build success report from the 0day robot. * The 4.16 rework of altmap handling led to some configurations leaking page table allocations due to freeing from the altmap reservation rather than the page allocator. The impact without the fix is leaked memory and a WARN() message when tearing down libnvdimm namespaces. The rework also missed a place where error handling code needed to be removed that can lead to a crash if devm_memremap_pages() fails. * acpi_map_pxm_to_node() had a latent bug whereby it could misidentify the closest online node to a given proximity domain. * Block integrity handling was reworked several kernels back to allow calling add_disk() after setting up the integrity profile. The nd_btt and nd_blk drivers are just now catching up to fix automatic partition detection at driver load time. * The new peristence_domain attribute, a platform indicator of whether cpu caches are powerfail protected for example, is meant to be a single value enum and not a set of flags. This oversight was caught while reviewing new userspace code in libndctl to communicate the attribute. Fix this new enabling up so that we are not stuck with an unwanted userspace ABI" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, nfit: fix persistence domain reporting libnvdimm, region: hide persistence_domain when unknown acpi, numa: fix pxm to online numa node associations x86, memremap: fix altmap accounting at free libnvdimm: remove redundant assignment to pointer 'dev' libnvdimm, {btt, blk}: do integrity setup before add_disk() kernel/memremap: Remove stale devres_free() call
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A bunch of fixes all over the place (core, i915, amdgpu, imx, sun4i, ast, tegra, vmwgfx), nothing too serious or worrying at this stage. - one uapi fix to stop multi-planar images with getfb - Sun4i error path and clock fixes - udl driver mmap offset fix - i915 DP MST and GPU reset fixes - vmwgfx mutex and black screen fixes - imx array underflow fix and vblank fix - amdgpu: display fixes - exynos devicetree fix - ast mode fix" * tag 'drm-fixes-for-v4.16-rc7' of git://people.freedesktop.org/~airlied/linux: (29 commits) drm/ast: Fixed 1280x800 Display Issue drm: udl: Properly check framebuffer mmap offsets drm/i915: Specify which engines to reset following semaphore/event lockups drm/vmwgfx: Fix a destoy-while-held mutex problem. drm/vmwgfx: Fix black screen and device errors when running without fbdev drm: Reject getfb for multi-plane framebuffers drm/amd/display: Add one to EDID's audio channel count when passing to DC drm/amd/display: We shouldn't set format_default on plane as atomic driver drm/amd/display: Fix FMT truncation programming drm/amd/display: Allow truncation to 10 bits drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()' drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()' drm/i915/dp: Write to SET_POWER dpcd to enable MST hub. drm/amd/display: fix dereferencing possible ERR_PTR() drm/amd/display: Refine disable VGA drm/tegra: Shutdown on driver unbind drm/tegra: dsi: Don't disable regulator on ->exit() drm/tegra: dc: Detach IOMMU group from domain only once dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node drm/imx: move arming of the vblank event to atomic_flush ...
-
David Rientjes authored
Commit 25160354 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations") changed the page allocator to no longer detect thp allocations based on __GFP_NORETRY. It did not, however, modify the mem cgroup try_charge() path to avoid oom kill for either khugepaged collapsing or thp faulting. It is never expected to oom kill a process to allocate a hugepage for thp; reclaim is governed by the thp defrag mode and MADV_HUGEPAGE, but allocations (and charging) should fallback instead of oom killing processes. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803191409420.124411@chino.kir.corp.google.com Fixes: 25160354 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations") Signed-off-by: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrey Ryabinin authored
Commit 726d061f ("mm: vmscan: kick flushers when we encounter dirty pages on the LRU") added flusher invocation to shrink_inactive_list() when many dirty pages on the LRU are encountered. However, shrink_inactive_list() doesn't wake up flushers for legacy cgroup reclaim, so the next commit bbef9384 ("mm: vmscan: remove old flusher wakeup from direct reclaim path") removed the only source of flusher's wake up in legacy mem cgroup reclaim path. This leads to premature OOM if there is too many dirty pages in cgroup: # mkdir /sys/fs/cgroup/memory/test # echo $$ > /sys/fs/cgroup/memory/test/tasks # echo 50M > /sys/fs/cgroup/memory/test/memory.limit_in_bytes # dd if=/dev/zero of=tmp_file bs=1M count=100 Killed dd invoked oom-killer: gfp_mask=0x14000c0(GFP_KERNEL), nodemask=(null), order=0, oom_score_adj=0 Call Trace: dump_stack+0x46/0x65 dump_header+0x6b/0x2ac oom_kill_process+0x21c/0x4a0 out_of_memory+0x2a5/0x4b0 mem_cgroup_out_of_memory+0x3b/0x60 mem_cgroup_oom_synchronize+0x2ed/0x330 pagefault_out_of_memory+0x24/0x54 __do_page_fault+0x521/0x540 page_fault+0x45/0x50 Task in /test killed as a result of limit of /test memory: usage 51200kB, limit 51200kB, failcnt 73 memory+swap: usage 51200kB, limit 9007199254740988kB, failcnt 0 kmem: usage 296kB, limit 9007199254740988kB, failcnt 0 Memory cgroup stats for /test: cache:49632KB rss:1056KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:49500KB writeback:0KB swap:0KB inactive_anon:0KB active_anon:1168KB inactive_file:24760KB active_file:24960KB unevictable:0KB Memory cgroup out of memory: Kill process 3861 (bash) score 88 or sacrifice child Killed process 3876 (dd) total-vm:8484kB, anon-rss:1052kB, file-rss:1720kB, shmem-rss:0kB oom_reaper: reaped process 3876 (dd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB Wake up flushers in legacy cgroup reclaim too. Link: http://lkml.kernel.org/r/20180315164553.17856-1-aryabinin@virtuozzo.com Fixes: bbef9384 ("mm: vmscan: remove old flusher wakeup from direct reclaim path") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Tested-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Vacek authored
This reverts commit b92df1de ("mm: page_alloc: skip over regions of invalid pfns where possible"). The commit is meant to be a boot init speed up skipping the loop in memmap_init_zone() for invalid pfns. But given some specific memory mapping on x86_64 (or more generally theoretically anywhere but on arm with CONFIG_HAVE_ARCH_PFN_VALID) the implementation also skips valid pfns which is plain wrong and causes 'kernel BUG at mm/page_alloc.c:1389!' crash> log | grep -e BUG -e RIP -e Call.Trace -e move_freepages_block -e rmqueue -e freelist -A1 kernel BUG at mm/page_alloc.c:1389! invalid opcode: 0000 [#1] SMP -- RIP: 0010: move_freepages+0x15e/0x160 -- Call Trace: move_freepages_block+0x73/0x80 __rmqueue+0x263/0x460 get_page_from_freelist+0x7e1/0x9e0 __alloc_pages_nodemask+0x176/0x420 -- crash> page_init_bug -v | grep RAM <struct resource 0xffff88067fffd2f8> 1000 - 9bfff System RAM (620.00 KiB) <struct resource 0xffff88067fffd3a0> 100000 - 430bffff System RAM ( 1.05 GiB = 1071.75 MiB = 1097472.00 KiB) <struct resource 0xffff88067fffd410> 4b0c8000 - 4bf9cfff System RAM ( 14.83 MiB = 15188.00 KiB) <struct resource 0xffff88067fffd480> 4bfac000 - 646b1fff System RAM (391.02 MiB = 400408.00 KiB) <struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB) <struct resource 0xffff88067fffd640> 100000000 - 67fffffff System RAM ( 22.00 GiB) crash> page_init_bug | head -6 <struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB) <struct page 0xffffea0001ede200> 1fffff00000000 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575 <struct page 0xffffea0001ede200> 505736 505344 <struct page 0xffffea0001ed8000> 505855 <struct page 0xffffea0001edffc0> <struct page 0xffffea0001ed8000> 0 0 <struct pglist_data 0xffff88047ffd9000> 0 <struct zone 0xffff88047ffd9000> DMA 1 4095 <struct page 0xffffea0001edffc0> 1fffff00000400 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575 BUG, zones differ! crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b787000 7b788000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS ffffea0001e00000 78000000 0 0 0 0 ffffea0001ed7fc0 7b5ff000 0 0 0 0 ffffea0001ed8000 7b600000 0 0 0 0 <<<< ffffea0001ede1c0 7b787000 0 0 0 0 ffffea0001ede200 7b788000 0 0 1 1fffff00000000 Link: http://lkml.kernel.org/r/20180316143855.29838-1-neelx@redhat.com Fixes: b92df1de ("mm: page_alloc: skip over regions of invalid pfns where possible") Signed-off-by: Daniel Vacek <neelx@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kirill A. Shutemov authored
shmem_unused_huge_shrink() gets called from reclaim path. Waiting for page lock may lead to deadlock there. There was a bug report that may be attributed to this: http://lkml.kernel.org/r/alpine.LRH.2.11.1801242349220.30642@mail.ewheeler.net Replace lock_page() with trylock_page() and skip the page if we failed to lock it. We will get to the page on the next scan. We can test for the PageTransHuge() outside the page lock as we only need protection against splitting the page under us. Holding pin oni the page is enough for this. Link: http://lkml.kernel.org/r/20180316210830.43738-1-kirill.shutemov@linux.intel.com Fixes: 779750d2 ("shmem: split huge pages beyond i_size under memory pressure") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Eric Wheeler <linux-mm@lists.ewheeler.net> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kirill A. Shutemov authored
deferred_split_scan() gets called from reclaim path. Waiting for page lock may lead to deadlock there. Replace lock_page() with trylock_page() and skip the page if we failed to lock it. We will get to the page on the next scan. Link: http://lkml.kernel.org/r/20180315150747.31945-1-kirill.shutemov@linux.intel.com Fixes: 9a982250 ("thp: introduce deferred_split_huge_page()") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kirill A. Shutemov authored
khugepaged is not yet able to convert PTE-mapped huge pages back to PMD mapped. We do not collapse such pages. See check khugepaged_scan_pmd(). But if between khugepaged_scan_pmd() and __collapse_huge_page_isolate() somebody managed to instantiate THP in the range and then split the PMD back to PTEs we would have a problem -- VM_BUG_ON_PAGE(PageCompound(page)) will get triggered. It's possible since we drop mmap_sem during collapse to re-take for write. Replace the VM_BUG_ON() with graceful collapse fail. Link: http://lkml.kernel.org/r/20180315152353.27989-1-kirill.shutemov@linux.intel.com Fixes: b1caa957 ("khugepaged: ignore pmd tables with THP mapped with ptes") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Toshi Kani authored
Implement pud_free_pmd_page() and pmd_free_pte_page() on x86, which clear a given pud/pmd entry and free up lower level page table(s). The address range associated with the pud/pmd entry must have been purged by INVLPG. Link: http://lkml.kernel.org/r/20180314180155.19492-3-toshi.kani@hpe.com Fixes: e61ce6ad ("mm: change ioremap to set up huge I/O mappings") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reported-by: Lei Li <lious.lilei@hisilicon.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Toshi Kani authored
On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ad ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-