- 13 Dec, 2010 14 commits
-
-
Rafał Miłecki authored
As discussed we do not know band width at core reset time and it is not a good idea to reset whole just to change band. So just set unconditionally 20 MHz band width as default during core reset. As for defines PHY clock changed to band width in specs and it makes much more sens to call defines by band width which is self-explainable. Updated specs do not mention 0 value, but comparing to old ones you can notice lineral relation between PHY clock speed and band width. So it makes sense for 0x0 value to be 10 MHz band width. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
I missed that part in previous reordering. Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Johannes Berg authored
Add support for split default keys (unicast and multicast) in mac80211. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Allow userspace to specify that a given key is default only for unicast and/or multicast transmissions. Only WEP keys are for both, WPA/RSN keys set here are GTKs for multicast only. For more future flexibility, allow to specify all combiations. Wireless extensions can only set both so use nl80211; WEP keys (connect keys) must be set as default for both (but 802.1X WEP is still possible). Signed-off-by:
-
Johannes Berg authored
Using the default key for "any key set" isn't quite what we should do. It works, but with the upcoming changes it makes life unnecessarily complex, so do something better here and really check for "any key". Signed-off-by:
-
Mohammed Shafi Shajakhan authored
The registers TBTT_TIMER ,DMA_BEACON_ALERT ,NEXT_SWBA are need to be configured only for AP and IBSS mode. SWBA register is used for generating software interrupts so that beacon frames will be created by the software.DMA beacon alert register is to indicate the hardware to DMA the contents of beacon buffer to PCU buffer and TBTT to start transmitting the packet buffer to the base band. Clearly these things are not needed for station/monitor mode so remove configuring them. Cc: doug dahlby <ddahlby@atheros.com> Signed-off-by:
Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by:
-
Sven Neumann authored
When a cached BSS struct is updated because a new beacon was received, the code replaces the cached information elements by the IEs from the new beacon. However it did not update the pub.information_elements and pub.len_information_elements fields leaving them either pointing to the old beacon IEs or in an inconsistent state where the data is replaced by the new beacon IEs but len_information_elements still has its value from the first beacon. Fix this by updating the information elements fields if they are pointing to beacon IEs. Signed-off-by:
Sven Neumann <s.neumann@raumfeld.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Rajkumar Manoharan authored
key4 of micentry is used, if ATH_CRYPT_CAP_MIC_COMBINED is set. But is not cleared on key cache reset. Cc: stable@kernel.org Signed-off-by:
Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by:
-
Rajkumar Manoharan authored
Add support to change interface type without bringing down the interface. Signed-off-by:
-
Bruno Randolf authored
Add a field to wiphy for the hardware to report the availble antennas for configuration. Only if this is set to something bigger than zero, will the anntenna configuration ops be executed. Allthough this could be a simple number of antennas, I defined it as a bitmap of antennas which are available for configuration, since it's more consistent with the rest of the antenna API and there could be cases where the hardware allows only configuration of certain antennas. As it does not make much of a difference in size or normal usage, I think it's better to be able to support this, in case the need arises. The antenna configuration is now also checked against the availabe antennas and rejected if it does not match. Signed-off-by:
Bruno Randolf <br1@einfach.org> -- v3: always apply available antenna mask (for "all" antennas case). v2: reject antenna configurations which don't match the available antennas Signed-off-by:
-
Luis R. Rodriguez authored
mac80211 will notify drivers when to go idle and ath9k assumed that it would get further notifications for idle states after a device stop() config call but as per agreed semantics the idle state of the radio is left up to driver after mac80211 issues the stop() callback. The driver is resposnbile for ensuring the device remains idle after that even between suspend / resume calls. This fixes suspend/resume when you issue suspend and resume twice on ath9k when ath9k_stop() was already called. We need to put the radio to full sleep in order for resume to work correctly. What might seem fishy is we are turning the radio off after resume. The reason why we do this is because we know we should not have anything enabled after a mac80211 tells us to stop(), if we resume and never get a start() we won't get another stop() by mac80211 so to be safe always bring the 802.11 device with the radio disabled after resume, this ensures that if we suspend we already have the radio disabled and only a start() will ever trigger it on. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
Upon a failure we never call ath9k_ps_restore() on ath_radio_enable(), this will throw off the sc->ps_usecount. When the sc->ps_usecount is > 0 we never put the chip to full sleep. This drains battery, and will also make the chip fail upon resume with: ath: Starting driver with initial channel: 5745 MHz ath: timeout (100000 us) on reg 0x7000: 0xdeadbeef & 0x00000003 != 0x00000000 This would make the chip useless upon resume. I cannot prove this can happen but in theory it is so best to avoid this race completely and not have users complain about a broken device after resume. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by:
-
- 09 Dec, 2010 2 commits
-
-
John W. Linville authored
Description by Hauke: "If CONFIG_ATH_DEBUG=y is set ATH_DBG_WARN_ON_ONCE uses WARN_ON_ONCE and returns something, but if CONFIG_ATH_DEBUG is not set it does not return anything. Now ATH_DBG_WARN_ON_ONCE is used in the boolean expression in an if case and is not returning anything and causes a compile error. CC [M] /drivers/net/wireless/ath/ath9k/main.o /drivers/net/wireless/ath/ath9k/main.c: In function ‘ath_isr’: /drivers/net/wireless/ath/ath9k/main.c:769: error: expected expression before ‘do’ make[5]: *** [/drivers/net/wireless/ath/ath9k/main.o] Error 1 make[4]: *** [/drivers/net/wireless/ath/ath9k] Error 2" Reported-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Sedat Dilek authored
The AHB bus support patchset moved the table "Known PCI ids" from base.c to pci.c - unfortunately, MODULE_DEVICE_TABLE() was not transferred. With this fix 'modinfo ath5k' lists the alias -> pci-id lines, again. The issue was introduced by: commit e5b046d8 "ath5k: Move PCI bus functions to separate file." Signed-off-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
-
- 08 Dec, 2010 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville authored
Conflicts: drivers/net/wireless/ath/ath9k/ath9k.h drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/ath/ath9k/xmit.c
-
Luis R. Rodriguez authored
Suspend requires the device to be in fullsleep otherwise upon resume the device becomes unresponsive. We need to ensure that when we want the device to go to sleep it yields to the request, otherwise we'll have a useless devices upon resume. Warn when changing the power fails as we need to look into these issues. Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
We should not be idle when we get the ATH9K_INT_TIM_TIMER, otherwise its a sign of something broken in our design with our idle state machine and mac80211. Skip these and WARN once just in case this is triggerable. Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> signed-off-by:
-
Amitkumar Karwar authored
1)WLAN_EID_BSS_COEX_2040 2)WLAN_EID_OVERLAP_BSS_SCAN_PARAM 3)WLAN_EID_EXT_CAPABILITY Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Ben Greear authored
Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
This let us avoid double addressing while still having reg check. Signed-off-by:
-
Rafał Miłecki authored
Order was changed in specs. For writing arrays we have designed bulk function which makes use of auto increment and do not write table address over and over. Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Ben Greear authored
It can be NULL according to docs, and logging showed it to be NULL in practice. Signed-off-by:
-
Helmut Schaa authored
Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Helmut Schaa authored
Add a new BSS attribute to allow hostapd to set the current HT opmode. Otherwise drivers won't be able to set up protection for HT rates in AP mode. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
David Kilroy authored
Enable the port when disabling countermeasures, and disable it on enabling countermeasures. This bug causes the response of the system to certain attacks to be ineffective. It also prevents wpa_supplicant from getting scan results, as wpa_supplicant disables countermeasures on startup - preventing the hardware from scanning. wpa_supplicant works with ap_mode=2 despite this bug because the commit handler re-enables the port. The log tends to look like: State: DISCONNECTED -> SCANNING Starting AP scan for wildcard SSID Scan requested (ret=0) - scan timeout 5 seconds EAPOL: disable timer tick EAPOL: Supplicant port status: Unauthorized Scan timeout - try to get results Failed to get scan results Failed to get scan results - try scanning again Setting scan request: 1 sec 0 usec Starting AP scan for wildcard SSID Scan requested (ret=-1) - scan timeout 5 seconds Failed to initiate AP scan. Reported by: Giacomo Comes <comes@naic.edu> Signed-off by: David Kilroy <kilroyd@googlemail.com> Cc: stable@kernel.org Signed-off-by: -
David Kilroy authored
... and interface up. In these situations, you are usually trying to connect to a new AP, so keeping TKIP countermeasures active is confusing. This is already how the driver behaves (inadvertently). However, querying SIOCGIWAUTH may tell userspace that countermeasures are active when they aren't. Clear the setting so that the reporting matches what the driver has done.. Signed-off by: David Kilroy <kilroyd@googlemail.com> Cc: stable@kernel.org Signed-off-by: -
Helmut Schaa authored
mac80211 doesn't handle shared skbs correctly at the moment. As a result a possible resize can trigger a BUG in pskb_expand_head. [ 676.030000] Kernel bug detected[#1]: [ 676.030000] Cpu 0 [ 676.030000] $ 0 : 00000000 00000000 819662ff 00000002 [ 676.030000] $ 4 : 81966200 00000020 00000000 00000020 [ 676.030000] $ 8 : 819662e0 800043c0 00000002 00020000 [ 676.030000] $12 : 3b9aca00 00000000 00000000 00470000 [ 676.030000] $16 : 80ea2000 00000000 00000000 00000000 [ 676.030000] $20 : 818aa200 80ea2018 80ea2000 00000008 [ 676.030000] $24 : 00000002 800ace5c [ 676.030000] $28 : 8199a000 8199bd20 81938f88 80f180d4 [ 676.030000] Hi : 0000026e [ 676.030000] Lo : 0000757e [ 676.030000] epc : 801245e4 pskb_expand_head+0x44/0x1d8 [ 676.030000] Not tainted [ 676.030000] ra : 80f180d4 ieee80211_skb_resize+0xb0/0x114 [mac80211] [ 676.030000] Status: 1000a403 KERNEL EXL IE [ 676.030000] Cause : 10800024 [ 676.030000] PrId : 0001964c (MIPS 24Kc) [ 676.030000] Modules linked in: mac80211_hwsim rt2800lib rt2x00soc rt2x00pci rt2x00lib mac80211 crc_itu_t crc_ccitt cfg80211 compat arc4 aes_generic deflate ecb cbc [last unloaded: rt2800pci] [ 676.030000] Process kpktgend_0 (pid: 97, threadinfo=8199a000, task=81879f48, tls=00000000) [ 676.030000] Stack : ffffffff 00000000 00000000 00000014 00000004 80ea2000 00000000 00000000 [ 676.030000] 818aa200 80f180d4 ffffffff 0000000a 81879f78 81879f48 81879f48 00000018 [ 676.030000] 81966246 80ea2000 818432e0 80f1a420 80203050 81814d98 00000001 81879f48 [ 676.030000] 81879f48 00000018 81966246 818432e0 0000001a 8199bdd4 0000001c 80f1b72c [ 676.030000] 80203020 8001292c 80ef4aa2 7f10b55d 801ab5b8 81879f48 00000188 80005c90 [ 676.030000] ... [ 676.030000] Call Trace: [ 676.030000] [<801245e4>] pskb_expand_head+0x44/0x1d8 [ 676.030000] [<80f180d4>] ieee80211_skb_resize+0xb0/0x114 [mac80211] [ 676.030000] [<80f1a420>] ieee80211_xmit+0x150/0x22c [mac80211] [ 676.030000] [<80f1b72c>] ieee80211_subif_start_xmit+0x6f4/0x73c [mac80211] [ 676.030000] [<8014361c>] pktgen_thread_worker+0xfac/0x16f8 [ 676.030000] [<8002ebe8>] kthread+0x7c/0x88 [ 676.030000] [<80008e0c>] kernel_thread_helper+0x10/0x18 [ 676.030000] [ 676.030000] [ 676.030000] Code: 24020001 10620005 2502001f <0200000d> 0804917a 00000000 2502001f 00441023 00531021 Fix this by making a local copy of shared skbs prior to mangeling them. To avoid copying the skb unnecessarily move the skb_copy call below the checks that don't need write access to the skb. Also, move the assignment of nh_pos and h_pos below the skb_copy to point to the correct skb. It would be possible to avoid another resize of the copied skb by using skb_copy_expand instead of skb_copy but that would make the patch more complex. Also, shared skbs are a corner case right now, so the resize shouldn't matter much. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Sujith Manoharan authored
The HW has to be set to FULLSLEEP mode during suspend, when no interface has been brought up. Not doing this would break resume, as the chip won't be powered up at all. Signed-off-by:
Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Javier Cardona authored
Signed-off-by:
Javier Cardona <javier@cozybit.com> Signed-off-by:
-
Javier Cardona authored
This results in an erroneus num_adhoc_vifs count, as the this counter was incremented but not decremented for mesh interfaces. Signed-off-by:
-
Javier Cardona authored
This patch fixes the oops below when attempting to bring up a mesh interface on ath5k hardware. [ 128.933099] kernel BUG at drivers/net/wireless/ath/ath5k/base.c:197! [ 128.933099] invalid opcode: 0000 [#1] (...) [ 128.933099] Call Trace: [ 128.933099] [<c83b77fa>] ? ath5k_beacon_update+0x57/0x1f8 [ath5k] [ 128.933099] [<c02d9a40>] ? __sysfs_add_one+0x28/0x76 [ 128.933099] [<c83b830e>] ? ath5k_bss_info_changed+0x13f/0x173 [ath5k] [ 128.933099] [<c82ff629>] ? ieee80211_config_beacon+0xc0/0x17e [mac80211] [ 128.933099] [<c82f073e>] ? ieee80211_bss_info_change_notify+0x182/0x18b [mac80211] [ 128.933099] [<c83b81cf>] ? ath5k_bss_info_changed+0x0/0x173 [ath5k] [ 128.933099] [<c82ff6d6>] ? ieee80211_config_beacon+0x16d/0x17e [mac80211] [ 128.933099] [<c82ff753>] ? ieee80211_add_beacon+0x34/0x39 [mac80211] [ 128.933099] [<c830a4ed>] ? ieee80211s_init+0xf8/0x10f [mac80211] [ 128.933099] [<c830a5df>] ? ieee80211_mesh_init_sdata+0xdb/0x154 [mac80211] Signed-off-by:
-
David Kilroy authored
The interrupt handler takes a lock - but since commit bcad6e80 this lock goes through an indirection specified in the hermes_t structure. We must therefore initialise the structure before setting up the interrupt handler. Fix orinoco_cs and spectrum_cs <https://bugzilla.kernel.org/show_bug.cgi?id=23932> Bisected by: Matt Domsch <Matt_Domsch@dell.com> Signed-off by: David Kilroy <kilroyd@googlemail.com> Cc: stable@kernel.org Signed-off-by:
-
