- 25 Mar, 2011 1 commit
-
-
David S. Miller authored
Any operation that: 1) Brings up an interface 2) Adds an IP address to an interface 3) Deletes an IP address from an interface can potentially invalidate the nh_saddr value, requiring it to be recomputed. Perform the recomputation lazily using a generation ID. Reported-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 24 Mar, 2011 5 commits
-
-
Randy Dunlap authored
Fix section mismatch warning by renaming the pci_driver variable to a recognized (whitelisted) name. WARNING: drivers/net/pch_gbe/pch_gbe.o(.data+0x1f8): Section mismatch in reference from the variable pch_gbe_pcidev to the variable .devinit.rodata:pch_gbe_pcidev_id The variable pch_gbe_pcidev references the variable __devinitconst pch_gbe_pcidev_id If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Eric Dumazet authored
Alessandro Suardi reported that we could not change route metrics : ip ro change default .... advmss 1400 This regression came with commit 9c150e82 (Allocate fib metrics dynamically). fib_metrics is no longer an array, but a pointer to an array. Reported-by:
Alessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Tested-by:
-
Yevgeny Petrilin authored
Avoiding abuse of ethtool_drvinfo.driver field. HW specific info can be retrieved using lspci. Signed-off-by:
Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by:
-
-
Eric Dumazet authored
commit fd245a4a (net_sched: move TCQ_F_THROTTLED flag) added a race. qdisc_watchdog() is run from softirq, so special care should be taken or we can lose one state transition (THROTTLED/RUNNING) Prior to fd245a4a, we were manipulating q->flags (qdisc->flags &= ~TCQ_F_THROTTLED;) and this manipulation could only race with qdisc_warn_nonwc(). Since we want to avoid atomic ops in qdisc fast path - it was the meaning of commit 37112105 (QDISC_STATE_RUNNING dont need atomic bit ops) - fix is to move THROTTLE bit into 'state' field, this one being manipulated with SMP and IRQ safe operations. Signed-off-by:
-
- 23 Mar, 2011 33 commits
-
-
-
Julia Lawall authored
Request_mem_region should be used with release_mem_region, not release_resource. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,E; @@ *x = request_mem_region(...) ... when != release_mem_region(x) when != x = E * release_resource(x); // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
Request_mem_region should be used with release_mem_region, not release_resource. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,E; @@ *x = request_mem_region(...) ... when != release_mem_region(x) when != x = E * release_resource(x); // </smpl> Signed-off-by:
-
Jiri Pirko authored
This prevents possible race between bond_enslave and bond_handle_frame as reported by Nicolas by moving rx_handler register/unregister. slave->bond is added to hold pointer to master bonding sructure. That way dev->master is no longer used in bond_handler_frame. Also, this removes "BUG: scheduling while atomic" message Reported-by:
Nicolas de Pesloüan <nicolas.2p.debian@gmail.com> Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> Tested-by:
Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by:
-
Stanislaw Gruszka authored
Rmmod myri10ge crash at free_netdev() -> netif_napi_del(), because napi structures are already deallocated. To fix call netif_napi_del() before kfree() at myri10ge_free_slices(). Cc: stable@kernel.org Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Yevgeny Petrilin authored
Signed-off-by:
-
Yevgeny Petrilin authored
Doorbell is used according to usage of BlueFlame. For Blue Flame to work in Ethernet mode QP number should have 0 at bits 6,7. Allocating range of QPs accordingly. Signed-off-by:
-
Eli Cohen authored
Do not allow a kernel consumer to allocate a UAR to serve for blue flame if the number of available UARs gets below MLX4_NUM_RESERVED_UARS (currently 8). This will allow userspace apps to open a device file and run things like ibv_devinfo. Signed-off-by:
Eli Cohen <eli@mellanox.co.il> Signed-off-by:
-
Eli Cohen authored
Add mlx4_bitmap_avail() to give the number of available resources. We want to use this as a hint to whether to allocate a resources or not. This patch is introduced to be used with allocation blue flame registers. Signed-off-by:
-
Eli Cohen authored
Using blue flame can improve latency by allowing the HW to more efficiently access the WQE. This patch presents two functions that are used to allocate or release HW resources for using blue flame; the caller need to supply a struct mlx4_bf object when allocating resources. Consumers that make use of this API should post doorbells to the UAR object pointed by the initialized struct mlx4_bf; Signed-off-by:
-
Yevgeny Petrilin authored
The mlx4_en module now uses the new steering mechanism. The RX packets are now steered through the MCG table instead of Mac table for unicast, and default entry for multicast. The feature is enabled through INIT_HCA Signed-off-by:
-
Yevgeny Petrilin authored
For Ethernet mode only, When we want to register QP as promiscuous, it must be added to all the existing steering entries and also to the default one. The promiscuous QP might also be on of "real" QPs, which means we need to monitor every entry to avoid duplicates and ensure we close an entry when all it has is promiscuous QPs. Same mechanism both for unicast and multicast. Signed-off-by:
-
Yevgeny Petrilin authored
The same packet steering mechanism would be used both for IB and Ethernet, Both multicasts and unicasts. This commit prepares the general infrastructure for this. Signed-off-by:
-
Yevgeny Petrilin authored
HW revision is derived from device ID and rev id. Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by:
-
Yevgeny Petrilin authored
The driver queries the FW for WOL support. Ethtool get/set_wol is implemented accordingly. Only magic packets are supported at the time. Signed-off-by:
Igor Yarovinsky <igory@mellanox.co.il> Signed-off-by:
-
Yevgeny Petrilin authored
Each RX ring will have its own interrupt vector, and TX rings will share one (we mostly use polling for TX completions). The vectors are assigned first time device is opened, and its name includes the interface name and ring number. Signed-off-by:
Markuze Alex <markuze@mellanox.co.il> Signed-off-by:
-
Yevgeny Petrilin authored
Adding a pool of MSI-X vectors and EQs that can be used explicitly by mlx4_core customers (mlx4_ib, mlx4_en). The consumers will assign their own names to the interrupt vectors. Those vectors are not opened at mlx4 device initialization, opened by demand. Changed the max number of possible EQs according to the new scheme, no longer relies on on number of cores. The new functionality is exposed through mlx4_assign_eq() and mlx4_release_eq(). Customers that do not use the new API will get completion vectors as before. Signed-off-by:
-
Yevgeny Petrilin authored
Signed-off-by:
-
Yevgeny Petrilin authored
Signed-off-by:
-
Yevgeny Petrilin authored
Instead of reseting the module parameters each ifup or mtu change, they are being set once at device initialization Signed-off-by:
-
Yevgeny Petrilin authored
Signed-off-by:
-
Senthil Balasubramanian authored
commit 86271e46 introduced a regression that caused mac80211 queues in stopped state. ath_drain_all_txq is called in driver flush which would reset the stopped flag and the mac80211 queues were never started after that. iperf traffic is completely stalled due to this issue. Restart the mac80211 queues in driver flush only if the txqs were drained. Signed-off-by:
Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Senthil Balasubramanian authored
With the recent tx status optimization in mac80211, we bail out as and and when invalid rate index is found. So the behavior of resetting rate idx to -1 and count to 0 has changed for the rate indexes that were not part of the driver's retry series. This has resulted in ath9k using incorrect rate table index which caused the system to panic. Ideally ath9k need to loop only for the indexes that were part of the retry series and so simply use hw->max_rates as the loop counter. Pasted the stack trace of the panic issue for reference. [ 754.093192] BUG: unable to handle kernel paging request at ffff88046a9025b0 [ 754.093256] IP: [<ffffffffa02eac49>] ath_tx_status+0x209/0x2f0 [ath9k] [ 754.094888] Call Trace: [ 754.094903] <IRQ> [ 754.094928] [<ffffffffa051f883>] ieee80211_tx_status+0x203/0x9e0 [mac80211] [ 754.094975] [<ffffffffa053e305>] ? __ieee80211_wake_queue+0x125/0x140 [mac80211] [ 754.095017] [<ffffffffa02e66c9>] ath_tx_complete_buf+0x1b9/0x370 [ath9k] [ 754.095054] [<ffffffffa02e6fcf>] ath_tx_complete_aggr+0x51f/0xb50 [ath9k] [ 754.095098] [<ffffffffa05382a3>] ? ieee80211_prepare_and_rx_handle+0x173/0xab0 [mac80211] [ 754.095148] [<ffffffff81350e62>] ? _raw_spin_unlock_irqrestore+0x32/0x40 [ 754.095186] [<ffffffffa02e9735>] ath_tx_tasklet+0x365/0x4b0 [ath9k] [ 754.095224] [<ffffffff8107a2a2>] ? clockevents_program_event+0x62/0xa0 [ 754.095261] [<ffffffffa02e2628>] ath9k_tasklet+0x168/0x1c0 [ath9k] [ 754.095298] [<ffffffff8105599b>] tasklet_action+0x6b/0xe0 [ 754.095331] [<ffffffff81056278>] __do_softirq+0x98/0x120 [ 754.095361] [<ffffffff8100cd5c>] call_softirq+0x1c/0x30 [ 754.095393] [<ffffffff8100efb5>] do_softirq+0x65/0xa0 [ 754.095423] [<ffffffff810563fd>] irq_exit+0x8d/0x90 [ 754.095453] [<ffffffff8100ebc1>] do_IRQ+0x61/0xe0 [ 754.095482] [<ffffffff81351413>] ret_from_intr+0x0/0x15 [ 754.095513] <EOI> [ 754.095531] [<ffffffff81014375>] ? native_sched_clock+0x15/0x70 [ 754.096475] [<ffffffffa02bcfa6>] ? acpi_idle_enter_bm+0x24d/0x285 [processor] [ 754.096475] [<ffffffffa02bcf9f>] ? acpi_idle_enter_bm+0x246/0x285 [processor] [ 754.096475] [<ffffffff8127fab2>] cpuidle_idle_call+0x82/0x100 [ 754.096475] [<ffffffff8100a236>] cpu_idle+0xa6/0xf0 [ 754.096475] [<ffffffff81339bc1>] rest_init+0x91/0xa0 [ 754.096475] [<ffffffff814efccd>] start_kernel+0x3fd/0x408 [ 754.096475] [<ffffffff814ef347>] x86_64_start_reservations+0x132/0x136 [ 754.096475] [<ffffffff814ef451>] x86_64_start_kernel+0x106/0x115 [ 754.096475] RIP [<ffffffffa02eac49>] ath_tx_status+0x209/0x2f0 [ath9k] Signed-off-by:
-
armadefuego@gmail.com authored
On hardware busy the scan request pointer should be cleared, as higher levels will release. This avoids a crash when that pointer is erroneously used later. Signed-off-by:
Joseph J. Gunn <armadefuego@yahoo.com> Signed-off-by:
-
Johannes Berg authored
Clearly a mistake, since pointers won't suddenly change their value... Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Eric Dumazet authored
commit 2c8cec5c (Cache learned PMTU information in inetpeer) added an extra inet_putpeer() call in ip_rt_update_pmtu(). This results in various problems, since we can free one inetpeer, while it is still in use. Ref: http://www.spinics.net/lists/netdev/msg159121.htmlReported-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
David S. Miller authored
In commit 9435eb1c ("ipv4: Implement __ip_dev_find using new interface address hash.") we reimplemented __ip_dev_find() so that it doesn't have to do a full FIB table lookup. Instead, it consults a hash table of addresses configured to interfaces. This works identically to the old code in all except one case, and that is for loopback subnets. The old code would match the loopback device for any IP address that falls within a subnet configured to the loopback device. Handle this corner case by doing the FIB lookup. We could implement this via inet_addr_onlink() but: 1) Someone could configure many addresses to loopback and inet_addr_onlink() is a simple list traversal. 2) We know the old code works. Reported-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Yuchung Cheng authored
In the current undo logic, cwnd is moderated after it was restored to the value prior entering fast-recovery. It was moderated first in tcp_try_undo_recovery then again in tcp_complete_cwr. Since the undo indicates recovery was false, these moderations are not necessary. If the undo is triggered when most of the outstanding data have been acknowledged, the (restored) cwnd is falsely pulled down to a small value. This patch removes these cwnd moderations if cwnd is undone a) during fast-recovery b) by receiving DSACKs past fast-recovery Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Linus Lüssing authored
The ipv6_dev_get_saddr() is currently called with an uninitialized destination address. Although in tests it usually seemed to nevertheless always fetch the right source address, there seems to be a possible race condition. Therefore this commit changes this, first setting the destination address and only after that fetching the source address. Reported-by:
Jan Beulich <JBeulich@novell.com> Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
-
Sriram authored
With recent changes to the driver(switch to new cpdma layer), the support for buffer descriptor address translation logic is broken. This affects platforms where the physical address of the descriptors as seen by the DMA engine is different from the physical address. Original Patch adding translation logic support: Commit: ad021ae8Signed-off-by:
Sriramakrishnan A G <srk@ti.com> Tested-By:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Florian Westphal authored
This avoids explicit cast to avoid 'discards qualifiers' compiler warning in a netfilter patch that i've been working on. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Steve Hodgson authored
If SR-IOV is enabled by firmware, even if it is not enabled in the PCI capability, TX pushes using write-combining may be corrupted. We want to know whether it is enabled before mapping the NIC registers, and even if PCI extended capabilities are not accessible. Therefore, we look for the MSI capability, which is removed if SR-IOV is enabled. Signed-off-by:Ben Hutchings <bhutchings@solarflare.com>
-
- 22 Mar, 2011 1 commit
-
-
