SGI-PV: 936255
SGI-Modid: xfs-linux:xfs-kern:192759a
Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

SGI-PV: 908809
SGI-Modid: xfs-linux:xfs-kern:192756a
Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

SGI-PV: 934679
SGI-Modid: xfs-linux:xfs-kern:192570a
Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

SGI-PV: 908809
SGI-Modid: xfs-linux:xfs-kern:192348a
Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

SGI-PV: 935317
SGI-Modid: xfs-linux:xfs-kern:192007a
Signed-off-by: Dean Roehrich <roehrich@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

SGI-PV: 933551
SGI-Modid: xfs-linux:xfs-kern:192006a
Signed-off-by: Dean Roehrich <roehrich@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

SGI-PV: 933765
SGI-Modid: xfs-linux:xfs-kern:190760a
Signed-off-by: Dean Roehrich <roehrich@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

SGI-PV: 933551
SGI-Modid: xfs-linux:xfs-kern:190622a
Signed-off-by: Dean Roehrich <roehrich@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

SGI-PV: 932952
SGI-Modid: xfs-linux:xfs-kern:21938a
Signed-off-by: Nathan Scott <nathans@sgi.com>

Patch from Lennert Buytenhek

The ixp2000 defconfigs are among the few that do not enable module
support by default.  I keep enabling module support by hand for every
new kernel version, so let's just make this change upstream.

Signed-off-by: Lennert Buytenhek
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Richard Purdie

Fix typo in sharpsl_param.c so it works correctly on collie.

Signed-off-by: Richard Purdie
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

The IXP2000 has four timers, but if we're on an A-step IXP2800, timer
2 and 3 don't work.  We need two timers for timekeeping (one for the
timer interrupt and one for tracking missed jiffies), so on early
IXP2800s we have no other choice but to use timer 1 and 4 for that,
but on all other IXP2000s we'd rather leave timer 4 free since that's
the only timer we can use for the watchdog.
So, on buggy IXP2000s (i.e. the A-step IXP2800) we use timer 4 for
tracking missed jiffies, and on all all non-buggy IXP2000s (i.e.
everything but the A-step IXP2800) we use timer 2.
On a pre-production IXP2800, this patch should print these messages
on boot:
	Enabling IXP2800 erratum #25 workaround
	Unable to use IXP2000 watchdog due to IXP2800 erratum #25
On any non-buggy IXP2800 (as well as on IXP2400s) you shouldn't see
anything at all, and the watchdog should be usable again.

Signed-off-by: Lennert Buytenhek
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

This patch adds PCI support for the Versatile PB926 platform.

Signed-off-by: Colin King
Signed-off-by: Catalin Marinas
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Bellido Nicolas

Core support for AAEC-2000 based platforms.
This is an updated version of the previous patch, and takes
into account Russell's comments.
AAED-2000 default configuration will follow as soon
as some problems with the bootloader are sorted out...

Signed-off-by: Nicolas Bellido
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Convert ugly GCC types to Linux types:

	UQImode -> u8
	SImode -> s32
	USImode -> u32
	DImode -> s64
	UDImode -> u64
	word_type -> int
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This is not used anymore - RiscPC now contains the necessary
supporting code.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

A fairly recent platform requirement states that the OS must clear the
whole TCE table at setup time, in case firmware left any active
mappings in it.  Without this initialization, dynamic bus removes can
fail.  Firmware rejects these requests if active mappings still exist 
for a slot that has been deallocated by the OS.
Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Use the new cpu_has_feature macros instead of open coding it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Some rtasd printks were too loud. They would appear on a quiet boot
even though they were only informational.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

When DMA bounce buffers were unmapped and the data was memcpy'd to
the original buffer, we were not ensuring that the data was written
to RAM.  This means that there was the potential for page cache
pages to have different cache states depending whether they've been
bounced or not.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

flush_dcache_page() did nothing for these caches, but since they
suffer from I/D cache coherency issues, we need to ensure that data
is written back to RAM.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

We need to re-initialise the stack pointers for undefined, IRQ
and abort mode handlers whenever we resume.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add missed new files from basic SMP support for the Integrator/CP platform.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

When enabled, this should disable UCOPY prequeue'ing altogether,
but it does not due to a missing test.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the type of the third parameter 'length' of the 
raw_send_hdrinc() function from 'int' to 'size_t'.
This makes sense since this function is only ever called from one 
location, and the value passed as the third parameter in that location is 
itself of type size_t, so this makes the recieving functions parameter 
type match. Also, inside raw_send_hdrinc() the 'length' variable is 
used in comparisons with unsigned values and passed as parameter to 
functions expecting unsigned values (it's used in a single comparison with 
a signed value, but that one can never actually be negative so the patch 
also casts that one to size_t to stop gcc worrying, and it is passed in a 
single instance to memcpy_fromiovecend() which expects a signed int, but 
as far as I can see that's not a problem since the value of 'length' 
shouldn't ever exceed the value of a signed int).
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the type of the local variable 'i' in 
raw_probe_proto_opt() from 'int' to 'unsigned int'. The only use of 'i' in 
this function is as a counter in a for() loop and subsequent index into 
the msg->msg_iov[] array.
Since 'i' is compared in a loop to the unsigned variable msg->msg_iovlen 
gcc -W generates this warning : 

net/ipv4/raw.c:340: warning: comparison between signed and unsigned

Changing 'i' to unsigned silences this warning and is safe since the array 
index can never be negative anyway, so unsigned int is the logical type to 
use for 'i' and also enables a larger msg_iov[] array (but I don't know if 
that will ever matter).
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>