When the MFD driver is a loadable module, the watchdog driver fails
to get linked into the kernel:

drivers/watchdog/iTCO_wdt.o: In function `update_no_reboot_bit_pmc':
iTCO_wdt.c:(.text+0x54f): undefined reference to `intel_pmc_gcr_update'

The code is written to support operation without the MFD driver, so
add a Kconfig dependency that allows this, while disallowing the watchdog
to be built-in when the MFD driver is a module.

Fixes: 25f1ca31 ("platform/x86: intel_pmc_ipc: Convert to MFD")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There is no need to have comma in terminator line. This will help
to find a potentially broken entries, due to placing after it,
during compilation time.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add support for Vinga Twizzle J116 Silead touchscreen which uses GSL1680 chip.
Signed-off-by: Andrew Dunai <a@dun.ai>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Slim Bootloader(SBL) is a small open-source boot firmware,
designed for running on certain Intel platforms. SBL can be
thought-of as fulfilling the role of a minimal BIOS
implementation, i.e initializing the hardware and booting
Operating System.

Since SBL is not UEFI compliant, firmware update cannot be triggered
using standard UEFI runtime services. Further considering performance
impact, SBL doesn't look for a firmware update image on every reset
and does so only when firmware update signal is asserted.

SBL exposes an ACPI-WMI device which comes up in sysfs as
/sys/bus/wmi/44FADEB1xxx and this driver adds a
"firmware_update_request" device attribute. This attribute normally
has a value of 0 and userspace can signal SBL to update firmware,
on next reboot, by writing a value of 1 like:

echo 1 > /sys/bus/wmi/devices/44FADEB1xxx/firmware_update_request

This driver only implements a signaling mechanism, the actual firmware
update process and various details like firmware update image format,
firmware image location etc are defined by SBL and are not in the
scope of this driver.

DocLink: https://slimbootloader.github.io/security/firmware-update.htmlSigned-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When both CONFIG_DEBUG_FS and CONFIG_PM_SLEEP are disabled, the
functions that got moved out of the #ifdef section now cause
a warning:

drivers/platform/x86/intel_pmc_core.c:654:13: error: 'pmc_core_lpm_display' defined but not used [-Werror=unused-function]
  654 | static void pmc_core_lpm_display(struct pmc_dev *pmcdev, struct device *dev,
      |             ^~~~~~~~~~~~~~~~~~~~
drivers/platform/x86/intel_pmc_core.c:617:13: error: 'pmc_core_slps0_display' defined but not used [-Werror=unused-function]
  617 | static void pmc_core_slps0_display(struct pmc_dev *pmcdev, struct device *dev,
      |             ^~~~~~~~~~~~~~~~~~~~~~

Rather than add even more #ifdefs here, remove them entirely and
let the compiler work it out, it can actually get rid of all the
debugfs calls without problems as long as the struct member is
there.

The two PM functions just need a __maybe_unused annotations to avoid
another warning instead of the #ifdef.

Fixes: aae43c2b ("platform/x86: intel_pmc_core: Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

I will be helping the x86 platform driver maintainers to look after
Intel SCU drivers.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Intel Elkhart Lake exposes SCU/PMC as an ACPI device that only supports
IPC functionality so add a platform driver supporting it. Interrupt is
optional so we let intel_scu_ipc_probe() to decide based on the passed
platform data whether it uses interrupt or polling.
Co-developed-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Co-developed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Since 'value' is declared as unsigned long, the following statement is
always false.
	value < 0

So let's remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This adds dual fan control for the following models:
P50, P51, P52, P70, P71, P72, P1 gen1, P2 gen2, X1E gen1 and X1E gen2.

Both fans are controlled together as if they were a single fan.

Tested on an X1 Extreme Gen1, an X1 Extreme Gen2, and a P50.

The patch is defensive, it adds only specific supported machines, and falls
back to the old behavior if both fans cannot be controlled.

Background:
I tested the BIOS default behavior on my X1E gen2 and both fans are always
changed together. So rather than adding controls for each fan, this controls
both fans together as the BIOS would do.

This was inspired by a discussion on dual fan support for the thinkfan tool
(see link below). All BIOS IDs are taken from there. The X1E gen2 ID is
verified on my machine.

Thanks to GitHub users voidworker and civic9 for the earlier patches and
BIOS IDs, and to users peter-stoll and sassman for testing the patch on
their machines.

BugLink: https://github.com/vmatare/thinkfan/issues/58Signed-off-by: Lars Hofhansl <larsh@apache.org>
[andy: massaged commit message to capitalize ID and convert to BugLink]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Merge branch 'ib-mfd-x86-usb-watchdog-v5.7' of
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
to avoid conflicts in PDx86.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The driver lives now under MFD so split the current entry into two parts
and add me as co-maintainer of the Intel Broxton PMC driver. While there
correct formatting of Zha Qipeng's email address.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This driver only creates a bunch of platform devices sharing resources
belonging to the PMC device. This is pretty much what MFD subsystem is
for so move the driver there, renaming it to intel_pmc_bxt.c which
should be more clear what it is.

MFD subsystem provides nice helper APIs for subdevice creation so
convert the driver to use those. Unfortunately the ACPI device includes
separate resources for most of the subdevices so we cannot simply call
mfd_add_devices() to create all of them but instead we need to call it
separately for each device.

The new MFD driver continues to expose two sysfs attributes that allow
userspace to send IPC commands to the PMC/SCU to avoid breaking any
existing applications that may use these. Generally this is bad idea so
document this in the ABI documentation.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add new function that allows telemetry modules to get pointer to the
platform specific configuration. This is needed to allow the telemetry
debugfs module to fetch PMC IPC instance in the subsequent patch.

This also allows us to replace telemetry_pltconfig_valid() with
telemetry_get_pltdata() as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The PCI probe driver in intel_pmc_ipc.c is a duplicate of what we
already have in intel_scu_pcidrv.c with the exception that the later also
creates SCU specific devices. Move the PCI IDs from the intel_pmc_ipc.c
to intel_scu.c and use driver_data to detect whether SCU devices need to
be created or not.

Also update Kconfig entry to mention all platforms supported by the
Intel SCU PCI driver and change dependency from X86_INTEL_MID to PCI
which is more generic.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This allows to call the functions even when CONFIG_X86_INTEL_MID is not
enabled.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Now that all callers have been converted over to the SCU IPC API we can
drop intel_pmc_ipc_command().
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Convert the driver to use the new SCU IPC API. This allows us to get rid
of the duplicate PMC IPC implementation which is now covered in SCU IPC
driver.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Convert the Intel Apollo Lake telemetry driver to use the new SCU IPC
API. This allows us to get rid of the duplicate PMC IPC implementation
which is now covered in SCU IPC driver.

Also move telemetry specific IPC message constant to the telemetry
driver where it belongs.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This converts the Intel Merrifield PMIC driver over the new SCU IPC API
where the SCU IPC instance is passed to the functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Convert the Intel Broxton Whiskey Cover PMIC driver to use the new SCU
IPC API. This allows us to get rid of the PMC IPC implementation which
is now covered in SCU IPC driver. We drop the error log if the IPC
command fails because intel_scu_ipc_dev_command() does that already.

Also move PMIC specific IPC message constants to the PMIC driver from
the intel_pmc_ipc.h header.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Both PMIC drivers (intel_soc_pmic_mrfld and intel_soc_pmic_bxtwc) will
be using this field going forward to access the SCU IPC instance.

While there add kernel-doc for the intel_soc_pmic structure.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

SCU IPC is pretty much the same IPC implemented in the intel_pmc_ipc
driver so drop the duplicate implementation and call directly the SCU
IPC.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Drivers such as intel_pmc_ipc.c can be unloaded as well so in order to
support those in this driver add a new function that can be called to
unregister the SCU IPC when it is not needed anymore.

We also add a managed version of the intel_scu_ipc_register() that takes
care of calling intel_scu_ipc_unregister() automatically when the driver
is unbound.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Convert the IPC util to use the new SCU IPC API where the SCU IPC
instance is passed to the functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This converts the Intel MID watchdog driver over the new SCU IPC API
where the SCU IPC instance is passed to the functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This converts the power button driver to use the new SCU IPC API where
the SCU IPC instance is passed to the functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The current SCU IPC API has been operating on a single instance and
there has been no way to pin the providing module in place when the SCU
IPC is in use.

This implements a new API that takes the SCU IPC instance as first
parameter (NULL means the single instance is being used). The SCU IPC
instance can be retrieved by calling new function intel_scu_ipc_dev_get()
that take care of pinning the providing module in place as long as
intel_scu_ipc_dev_put() is not called.

The old API is updated to call the new API and is is left there in the
legacy API header to support the existing users that cannot be converted
easily.

Subsequent patches will convert most of the users over to the new API.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

In preparation for introducing a new API for SCU IPC, move the legacy
API and constants to a separate header that is is subject to be removed
eventually.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Currently we only log an error if the command times out which makes it
hard to figure out the failing command. This changes the driver to log
command and subcommand with the error code which should make debugging
easier. This also allows us to simplify the callers as they don't need
to log these errors themselves.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The SCU IPC functionality is usable outside of Intel MID devices. For
example modern Intel CPUs include the same thing but now it is called
PMC (Power Management Controller) instead of SCU. To make the IPC
available for those split the driver into core part (intel_scu_ipc.c)
and the SCU PCI driver part (intel_scu_pcidrv.c) which then calls the
former before it goes and creates rest of the SCU devices. The SCU IPC
will also register a new class that gets assigned to the device that is
created under the parent PCI device.

We also split the Kconfig symbols so that INTEL_SCU_IPC enables the SCU
IPC library and INTEL_SCU_PCI the SCU driver and convert the users
accordingly. While there remove default y from the INTEL_SCU_PCI symbol
as it is already selected by X86_INTEL_MID.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

asus-nb-wmi does not add any extra functionality on these Asus
Transformer books. They have detachable keyboards, so the hotkeys are
send through a HID device (and handled by the hid-asus driver) and also
the rfkill functionality is not used on these devices.

Besides not adding any extra functionality, initializing the WMI interface
on these devices actually has a negative side-effect. For some reason
the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives
GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED,
high and there is no (WMI or other) interface to drive this low again
causing the LED to be permanently on, even during suspend.

This commit adds a blacklist of DMI system_ids on which not to load the
asus-nb-wmi and adds these Transformer books to this list. This fixes
the webcam LED being permanently on under Linux.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Jasper Lake uses Icelake PCH IPs and the S0ix debug interfaces are same as
Icelake. It uses SLP_S0_DBG register latch/read interface from Icelake
generation. It doesn't use Tiger Lake LPM debug registers. Change the
Jasper Lake S0ix debug interface to use the ICL reg map.

Fixes: 16292bed ("platform/x86: intel_pmc_core: Add Atom based Jasper Lake (JSL) platform support")
Signed-off-by: Archana Patni <archana.patni@intel.com>
Acked-by: David E. Box <david.e.box@intel.com>
Tested-by: Divagar Mohandass <divagar.mohandass@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add touchscreen info for the ONDA V891 v5 tablet.
Signed-off-by: Maksim Karasev <karasevm98@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There are few parameters that are not described properly.
Fill the gap by describing them properly in kernel doc format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There is no need to split lines as they perfectly fit 80 character limit.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There are types and helpers that are redefined with old names.
Convert the WMI library to use those types and helpers directly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Merge branch 'ib-pdx86-properties' of
git://git.infradead.org/linux-platform-drivers-x86.git
to avoid conflicts in PDx86.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Fix spelling issues over the comments in the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

Since we have a generic helper, drop custom implementation in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

In one place we open coded set_secondary_fwnode().
Let's replace it with a helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>