GRO/GSO layers can be enabled on a node, even if said
node is only forwarding packets.

This patch permits GSO (and upcoming GRO) support for GRE
encapsulated packets, even if the host has no GRE tunnel setup.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: H.K. Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes some typos found by Sergei.
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jesse Gross says:

====================
[GIT net-next] Open vSwitch

Open vSwitch changes for net-next/3.14. Highlights are:
 * Performance improvements in the mechanism to get packets to userspace
   using memory mapped netlink and skb zero copy where appropriate.
 * Per-cpu flow stats in situations where flows are likely to be shared
   across CPUs. Standard flow stats are used in other situations to save
   memory and allocation time.
 * A handful of code cleanups and rationalization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Several functions and datastructures could be local
Found with 'make namespacecheck'
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jesse Gross <jesse@nicira.com>

The copy & csum optimization is no longer present with zerocopy
enabled. Compute the checksum in skb_gso_segment() directly by
dropping the HW CSUM capability from the features passed in.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Use of skb_zerocopy() can avoid the expensive call to memcpy()
when copying the packet data into the Netlink skb. Completes
checksum through skb_checksum_help() if not already done in
GSO segmentation.

Zerocopy is only performed if user space supported unaligned
Netlink messages. memory mapped netlink i/o is preferred over
zerocopy if it is set up.

Cost of upcall is significantly reduced from:
+   7.48%       vhost-8471  [k] memcpy
+   5.57%     ovs-vswitchd  [k] memcpy
+   2.81%       vhost-8471  [k] csum_partial_copy_generic

to:
+   5.72%     ovs-vswitchd  [k] memcpy
+   3.32%       vhost-5153  [k] memcpy
+   0.68%       vhost-5153  [k] skb_zerocopy

(megaflows disabled)
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Allows removing the net and dp_ifindex argument and simplify the
code.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Drop user features if an outdated user space instance that does not
understand the concept of user_features attempted to create a new
datapath.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Make the skb zerocopy logic written for nfnetlink queue available for
use by other modules.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Remove duplicated include.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jesse Gross <jesse@nicira.com>

As we're only doing a kfree() anyway in the RCU callback, we can
simply use kfree_rcu, which does the same job, and remove the
function rcu_free_sw_flow_mask_cb() and rcu_free_acts_callback().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

With mega flow implementation ovs flow can be shared between
multiple CPUs which makes stats updates highly contended
operation. This patch uses per-CPU stats in cases where a flow
is likely to be shared (if there is a wildcard in the 5-tuple
and therefore likely to be spread by RSS). In other situations,
it uses the current strategy, saving memory and allocation time.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Use memory mapped Netlink i/o for all unicast openvswitch
communication if a ring has been set up.

Benchmark
  * pktgen -> ovs internal port
  * 5M pkts, 5M flows
  * 4 threads, 8 cores

Before:
Result: OK: 67418743(c67108212+d310530) usec, 5000000 (9000byte,0frags)
  74163pps 5339Mb/sec (5339736000bps) errors: 0
	+   2.98%     ovs-vswitchd  [k] copy_user_generic_string
	+   2.49%     ovs-vswitchd  [k] memcpy
	+   1.84%       kpktgend_2  [k] memcpy
	+   1.81%       kpktgend_1  [k] memcpy
	+   1.81%       kpktgend_3  [k] memcpy
	+   1.78%       kpktgend_0  [k] memcpy

After:
Result: OK: 24229690(c24127165+d102524) usec, 5000000 (9000byte,0frags)
  206358pps 14857Mb/sec (14857776000bps) errors: 0
	+   2.80%     ovs-vswitchd  [k] memcpy
	+   1.31%       kpktgend_2  [k] memcpy
	+   1.23%       kpktgend_0  [k] memcpy
	+   1.09%       kpktgend_1  [k] memcpy
	+   1.04%       kpktgend_3  [k] memcpy
	+   0.96%     ovs-vswitchd  [k] copy_user_generic_string
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

An insufficent ring frame size configuration can lead to an
unnecessary skb allocation for every Netlink message. Check frame
size before taking the queue lock and allocating the skb and
re-check with lock to be safe.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Allocates a new sk_buff large enough to cover the specified payload
plus required Netlink headers. Will check receiving socket for
memory mapped i/o capability and use it if enabled. Will fall back
to non-mapped skb if message size exceeds the frame size of the ring.
Signed-of-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Flow lookup can happen either in packet processing context or userspace
context but it was annotated as requiring RCU read lock to be held. This
also allows OVS mutex to be held without causing warnings.
Reported-by: Justin Pettit <jpettit@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Reviewed-by: Thomas Graf <tgraf@redhat.com>

API changes only for code readability. No functional chnages.

This patch removes the underscored version. Added a new API
ovs_flow_tbl_lookup_stats() that returns the n_mask_hits.

Reported by: Ben Pfaff <blp@nicira.com>
Reviewed-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

We won't normally have a ton of flow masks but using a size_t to store
values no bigger than sizeof(struct sw_flow_key) seems excessive.

This reduces sw_flow_key_range and sw_flow_mask by 4 bytes on 32-bit
systems.  On 64-bit systems it shrinks sw_flow_key_range by 12 bytes but
sw_flow_mask only by 8 bytes due to padding.

Compile tested only.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Signed-off-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>

Conflicts:
	drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
	net/ipv6/ip6_tunnel.c
	net/ipv6/ip6_vti.c

ipv6 tunnel statistic bug fixes conflicting with consolidation into
generic sw per-cpu net stats.

qlogic conflict between queue counting bug fix and the addition
of multiple MAC address support.
Signed-off-by: David S. Miller <davem@davemloft.net>

action flushing missaccounting
Account only for deleted actions
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove unnecessary checks for act->ops
(suggested by Eric Dumazet).
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use DEVICE_ATTR_RO/RW macros to simplify bridge sysfs attribute definitions.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

br_multicast_set_hash_max() is called from process context in
net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function.

br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock),
which can deadlock the CPU if a softirq that also tries to take the
same lock interrupts br_multicast_set_hash_max() while the lock is
held .  This can happen quite easily when any of the bridge multicast
timers expire, which try to take the same lock.

The fix here is to use spin_lock_bh(), preventing other softirqs from
executing on this CPU.

Steps to reproduce:

1. Create a bridge with several interfaces (I used 4).
2. Set the "multicast query interval" to a low number, like 2.
3. Enable the bridge as a multicast querier.
4. Repeatedly set the bridge hash_max parameter via sysfs.

  # brctl addbr br0
  # brctl addif br0 eth1 eth2 eth3 eth4
  # brctl setmcqi br0 2
  # brctl setmcquerier br0 1

  # while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done
Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sathya Perla posted a patch trying to address following problem :

<quote>
 The vxlan driver sets itself as the socket owner for all the TX flows
 it encapsulates (using vxlan_set_owner()) and assigns it's own skb
 destructor. This causes all tunneled traffic to land up on only one TXQ
 as all encapsulated skbs refer to the vxlan socket and not the original
 socket.  Also, the vxlan skb destructor breaks some functionality for
 tunneled traffic like wmem accounting and as TCP small queues and
 FQ/pacing packet scheduler.
</quote>

I reworked Sathya patch and added some explanations.

vxlan_xmit() can avoid one skb_clone()/dev_kfree_skb() pair
and gain better drop monitor accuracy, by calling kfree_skb() when
appropriate.

The UDP socket used by vxlan to perform encapsulation of xmit packets
do not need to be alive while packets leave vxlan code. Its better
to keep original socket ownership to get proper feedback from qdisc and
NIC layers.

We use skb->sk to

A) control amount of bytes/packets queued on behalf of a socket, but
prior vxlan code did the skb->sk transfert without any limit/control
on vxlan socket sk_sndbuf.

B) security purposes (as selinux) or netfilter uses, and I do not think
anything is prepared to handle vxlan stacked case in this area.

By not changing ownership, vxlan tunnels behave like other tunnels.
As Stephen mentioned, we might do the same change in L2TP.
Reported-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP out_of_order_queue lock is not used, as queue manipulation
happens with socket lock held and we therefore use the lockless
skb queue routines (as __skb_queue_head())

We can use __skb_queue_head_init() instead of skb_queue_head_init()
to make this more consistent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It does not make sense to create an anycast address for an /128-prefix.
Suppress it.

As 32019e65 ("ipv6: Do not leave router anycast address for /127
prefixes.") shows we also may not leave them, because we could accidentally
remove an anycast address the user has allocated or got added via another
prefix.

Cc: François-Xavier Le Bail <fx.lebail@yahoo.com>
Cc: Thomas Haller <thaller@redhat.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The existing serial state notification handling expected older Option
devices, having a hardcoded assumption that the Modem port was always
USB interface #2.  That isn't true for devices from the past few years.

hso_serial_state_notification is a local cache of a USB Communications
Interface Class SERIAL_STATE notification from the device, and the
USB CDC specification (section 6.3, table 67 "Class-Specific Notifications")
defines wIndex as the USB interface the event applies to.  For hso
devices this will always be the Modem port, as the Modem port is the
only port which is set up to receive them by the driver.

So instead of always expecting USB interface #2, instead validate the
notification with the actual USB interface number of the Modem port.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It returns 0 in case of success, !0 error otherwise. Fix the improper error
verification.

Fixes: 2c9839c1 ("bonding: add num_grat_arp attribute netlink support")
CC: sfeldma@cumulusnetworks.com
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Acked-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the boolean value with the error code for the return value
of the rtl_ops_init().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some information of the device may be used in other functions. Move
the relative code to make sure it would be initialzed correctly
before using it.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the tabs of the variables declaration with the spaces.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With arm:allmodconfig, building the Teles PCI driver fails with

telespci.c:294:2: error: #error "not running on big endian machines now"

Similar, building the driver for HFC PCI-Bus cards fails with

hfc_pci.c:1647:2: error: #error "not running on big endian machines now"

Remove the big endian cpp check from both drivers to fix the build errors.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Proportional Integral controller Enhanced (PIE) is a scheduler to address the
bufferbloat problem.

>From the IETF draft below:
" Bufferbloat is a phenomenon where excess buffers in the network cause high
latency and jitter. As more and more interactive applications (e.g. voice over
IP, real time video streaming and financial transactions) run in the Internet,
high latency and jitter degrade application performance. There is a pressing
need to design intelligent queue management schemes that can control latency and
jitter; and hence provide desirable quality of service to users.

We present here a lightweight design, PIE(Proportional Integral controller
Enhanced) that can effectively control the average queueing latency to a target
value. Simulation results, theoretical analysis and Linux testbed results have
shown that PIE can ensure low latency and achieve high link utilization under
various congestion situations. The design does not require per-packet
timestamp, so it incurs very small overhead and is simple enough to implement
in both hardware and software.  "

Many thanks to Dave Taht for extensive feedback, reviews, testing and
suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and
suggestions.  Naeem Khademi and Dave Taht independently contributed to ECN
support.

For more information, please see technical paper about PIE in the IEEE
Conference on High Performance Switching and Routing 2013. A copy of the paper
can be found at ftp://ftpeng.cisco.com/pie/.

Please also refer to the IETF draft submission at
http://tools.ietf.org/html/draft-pan-tsvwg-pie-00

All relevant code, documents and test scripts and results can be found at
ftp://ftpeng.cisco.com/pie/.

For problems with the iproute2/tc or Linux kernel code, please contact Vijay
Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu
(mysuryan@cisco.com)
Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Mythili Prabhu <mysuryan@cisco.com>
CC: Dave Taht <dave.taht@bufferbloat.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/netfilter/nfnetlink_queue_core.c: In function 'nfqnl_put_sk_uidgid':
net/netfilter/nfnetlink_queue_core.c:304:35: error: 'TCP_TIME_WAIT' undeclared (first use in this function)
net/netfilter/nfnetlink_queue_core.c:304:35: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [net/netfilter/nfnetlink_queue_core.o] Error 1

Just a missing include of net/tcp_states.h
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says: <pablo@netfilter.org>

====================
nftables updates for net-next

The following patchset contains nftables updates for your net-next tree,
they are:

* Add set operation to the meta expression by means of the select_ops()
  infrastructure, this allows us to set the packet mark among other things.
  From Arturo Borrero Gonzalez.

* Fix wrong format in sscanf in nf_tables_set_alloc_name(), from Daniel
  Borkmann.

* Add new queue expression to nf_tables. These comes with two previous patches
  to prepare this new feature, one to add mask in nf_tables_core to
  evaluate the queue verdict appropriately and another to refactor common
  code with xt_NFQUEUE, from Eric Leblond.

* Do not hide nftables from Kconfig if nfnetlink is not enabled, also from
  Eric Leblond.

* Add the reject expression to nf_tables, this adds the missing TCP RST
  support. It comes with an initial patch to refactor common code with
  xt_NFQUEUE, again from Eric Leblond.

* Remove an unused variable assignment in nf_tables_dump_set(), from Michal
  Nazarewicz.

* Remove the nft_meta_target code, now that Arturo added the set operation
  to the meta expression, from me.

* Add help information for nf_tables to Kconfig, also from me.

* Allow to dump all sets by specifying NFPROTO_UNSPEC, similar feature is
  available to other nf_tables objects, requested by Arturo, from me.

* Expose the table usage counter, so we can know how many chains are using
  this table without dumping the list of chains, from Tomasz Bursztyka.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e only.

Majority of this series contains patches from Greg and Mitch to fix
up or add functionality to the PF/VF driver interactions.  Notably,
a fix for SR-IOV VF port VLAN which resolved the problem of port VLAN
configurations not being persistent across VF driver loads and unloads
and enable/disable of the feature.  Also do not enable the default port
on the VEB, which is designed only to bridge the PF to an Open vSwitch
or bridge.  Another fix to resolve a possible memory corruption
condition where ARQ messages are written to random memory locations.
Fix a problem where the 'ip link show' command would display stale
link address information after the link address was set via the 'ip
link set' command.

Anjali provides several patches, one which saves information that can
be used while cleaning the Tx ring and useful in detecting Tx hangs.
Then provides a fixes to the admin queue shutdown function to ensure
we are shutting down the queue in the shutdown path and ensure ASQ is
alive before issuing the admin queue command.

Shannon provides a fix for get/update vsi params where the incorrect
struct was being used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sathya Perla says:

====================
be2net: patch set

Pls apply the following bug fixes to the 'net' tree. Thanks.

Suresh Reddy (2):
  be2net: increase the timeout value for loopback-test FW cmd
  be2net: fix max_evt_qs calculation for BE3 in SR-IOV config

Vasundhara Volam (1):
  be2net: disable RSS when number of RXQs is reduced to 1 via
    set-channels
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver wrongly assumes 16 EQs/vectors are available for each BE3 PF.
When SR-IOV is enabled, a BE3 PF can support only a max of 8 EQs.
Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>