Commit 0a892c1c ("perf record: Add dummy event during system wide
synthesis") reveals an issue with Intel PT system wide tracing.
Specifically that Intel PT already adds a dummy tracking event, and it
is not the first event.  Adding another dummy tracking event causes
duplicated sideband events.  Fix by checking for an existing dummy
tracking event first.

Example showing duplicated switch events:

 Before:

   # perf record -a -e intel_pt//u uname
   Linux
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.895 MB perf.data ]
   # perf script --no-itrace --show-switch-events | head
            swapper     0 [007]  6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid:    11/11
            swapper     0 [007]  6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid:    11/11
          rcu_sched    11 [007]  6390.516223: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:     0/0
          rcu_sched    11 [007]  6390.516224: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:     0/0
          rcu_sched    11 [007]  6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid:     0/0
          rcu_sched    11 [007]  6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid:     0/0
            swapper     0 [007]  6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:    11/11
            swapper     0 [007]  6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:    11/11
            swapper     0 [002]  6390.516415: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid:  5556/5559
            swapper     0 [002]  6390.516416: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid:  5556/5559

 After:

   # perf record -a -e intel_pt//u uname
   Linux
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.868 MB perf.data ]
   #  perf script --no-itrace --show-switch-events | head
            swapper     0 [005]  6450.567013: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid:  7179/7181
               perf  7181 [005]  6450.567014: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:     0/0
               perf  7181 [005]  6450.567028: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid:     0/0
            swapper     0 [005]  6450.567029: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:  7179/7181
            swapper     0 [005]  6450.571699: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid:    11/11
          rcu_sched    11 [005]  6450.571700: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:     0/0
          rcu_sched    11 [005]  6450.571702: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid:     0/0
            swapper     0 [005]  6450.571703: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:    11/11
            swapper     0 [005]  6450.579703: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid:    11/11
          rcu_sched    11 [005]  6450.579704: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid:     0/0
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200629091955.17090-3-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Python 3.8 is requiring that arguments being packed as integers are also
integers.  Add int() accordingly.

 Before:

   $ perf record -e intel_pt//u uname
   $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls
   2020-06-25 16:09:10.547256 Creating database...
   2020-06-25 16:09:10.733185 Writing to intermediate files...
   Traceback (most recent call last):
     File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1106, in synth_data
       cbr(id, raw_buf)
     File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1058, in cbr
       value = struct.pack("!hiqiiiiii", 4, 8, id, 4, cbr, 4, MHz, 4, percent)
   struct.error: required argument is not an integer
   Fatal Python error: problem in Python trace event handler
   Python runtime state: initialized

   Current thread 0x00007f35d3695780 (most recent call first):
   <no Python frame>
   Aborted (core dumped)

 After:

   $ dropdb perf_data_db
   $ rm -rf perf_data_db-perf-data
   $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls
   2020-06-25 16:09:40.990267 Creating database...
   2020-06-25 16:09:41.207009 Writing to intermediate files...
   2020-06-25 16:09:41.270915 Copying to database...
   2020-06-25 16:09:41.382030 Removing intermediate files...
   2020-06-25 16:09:41.384630 Adding primary keys
   2020-06-25 16:09:41.541894 Adding foreign keys
   2020-06-25 16:09:41.677044 Dropping unused tables
   2020-06-25 16:09:41.703761 Done

Fixes: aba44287 ("perf scripts python: export-to-postgresql.py: Export Intel PT power and ptwrite events")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200629091955.17090-2-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To bring in the change made in this cset:

  e3a9e681 ("x86/entry: Fixup bad_iret vs noinstr")

This doesn't cause any functional changes to tooling, just a rebuild.

Addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
  diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To synchronize UAPI headers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull m68knommu mm fixes from Greg Ungerer:
 "Two critical mm related fixes that affect booting of m68k/ColdFire
  devices.

  Both fix problems caused by recent system init memblock changes"

* tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: mm: fix node memblock init
  m68k: nommu: register start of the memory with memblock

Pull devicetree fixes from Rob Herring:

 - Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
   warnings

 - Various fixes for DT binding check warnings

 - A couple of build fixes/improvements for binding checks

 - ReST formatting improvements for writing-schema.rst

 - Document reference fixes

* tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: clock: imx: Fix e-mail address
  dt-bindings: thermal: k3: Fix the reg property
  dt-bindings: thermal: Remove soc unit address
  dt-bindings: display: arm: versatile: Pass the sysreg unit name
  dt-bindings: usb: aspeed: Remove the leading zeroes
  dt-bindings: copy process-schema-examples.yaml to process-schema.yaml
  dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check'
  dt-bindings: fix error in 'make clean' after 'make dt_binding_check'
  dt-bindings: mailbox: zynqmp_ipi: fix unit address
  dt-bindings: bus: uniphier-system-bus: fix warning in example
  scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
  doc: devicetree: bindings: fix spelling mistake
  docs: dt: minor adjustments at writing-schema.rst
  dt: fix reference to olpc,xo1.75-ec.txt
  dt: Fix broken references to renamed docs
  dt: fix broken links due to txt->yaml renames
  dt: update a reference for reneases pcar file renamed to yaml

Pull data race annotation from Christian Brauner:
 "This contains an annotation patch for a data race in copy_process()
  reported by KCSAN when reading and writing nr_threads.

  The data race is intentional and benign. This is obvious from the
  comment above the relevant code and based on general consensus when
  discussing this issue. So simply using data_race() to annotate this as
  an intentional race seems the best option"

* tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fork: annotate data race in copy_process()

Pull tpm fixes from Jarkko Sakkinen:
 "These are just fixes for bugs found lately.

  All of them are small scale things here and there, and all of them are
  for previous kernel releases (the oldest appeared in v2.6.17)"

* tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm_tis: Remove the HID IFX0102
  tpm_tis_spi: Prefer async probe
  tpm: ibmvtpm: Wait for ready buffer before probing for TPM2 attributes
  tpm/st33zp24: fix spelling mistake "drescription" -> "description"
  tpm_tis: extra chip->ops check on error path in tpm_tis_core_init
  tpm_tis_spi: Don't send anything during flow control
  tpm: Fix TIS locality timeout problems

Merge tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "tpm test fixes from Jarkko Sakkinen"

* tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: tpm: Use /bin/sh instead of /bin/bash
  selftests: tpm: Use 'test -e' instead of 'test -f'
  Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"

Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fixes from Shuah Khan
 "Fixes for build and run-times failures.

  Also includes troubleshooting tips updates to kunit user
  documentation"

* tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Documentation: kunit: Add some troubleshooting tips to the FAQ
  kunit: kunit_tool: Fix invalid result when build fails
  kunit: show error if kunit results are not present
  kunit: kunit_config: Fix parsing of CONFIG options with space

Pull nfsd fixes from Bruce Fields:
 "Fixes for a umask bug on exported filesystems lacking ACL support, a
  leak and a module unloading bug in the /proc/fs/nfsd/clients/ code,
  and a compile warning"

* tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: Add missing definition of ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
  nfsd: fix nfsdfs inode reference count leak
  nfsd4: fix nfsdfs reference count loop
  nfsd: apply umask on fs without ACL support

Pull block fixes from Jens Axboe:

 - Use kvfree_sensitive() for the block keyslot free (Eric)

 - Sync blk-mq debugfs flags (Hou)

 - Memory leak fix in virtio-blk error path (Hou)

* tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
  virtio-blk: free vblk-vqs in error path of virtblk_probe()
  block/keyslot-manager: use kvfree_sensitive()
  blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags

Pull io_uring fixes from Jens Axboe:
 "One fix in here, for a regression in 5.7 where a task is waiting in
  the kernel for a condition, but that condition won't become true until
  task_work is run. And the task_work can't be run exactly because the
  task is waiting in the kernel, so we'll never make any progress.

  One example of that is registering an eventfd and queueing io_uring
  work, and then the task goes and waits in eventfd read with the
  expectation that it'll get woken (and read an event) when the io_uring
  request completes. The io_uring request is finished through task_work,
  which won't get run while the task is looping in eventfd read"

* tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
  io_uring: use signal based task_work running
  task_work: teach task_work_add() to do signal_wake_up()

Acer C720 running Linux v5.3 reports this in klog:

tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis tpm_tis: Could not get TPM timeouts and durations
tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis 00:08: Could not get TPM timeouts and durations
ima: No TPM chip found, activating TPM-bypass!
tpm_inf_pnp 00:08: Found TPM with ID IFX0102

% git --no-pager grep IFX0102 drivers/char/tpm
drivers/char/tpm/tpm_infineon.c:	{"IFX0102", 0},
drivers/char/tpm/tpm_tis.c:	{"IFX0102", 0},		/* Infineon */

Obviously IFX0102 was added to the HID table for the TCG TIS driver by
mistake.

Fixes: 93e1b7d4 ("[PATCH] tpm: add HID module parameter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203877
Cc: stable@vger.kernel.org
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Reported-by: Ferry Toth: <ferry.toth@elsinga.info>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

On a Chromebook I'm working on I noticed a big (~1 second) delay
during bootup where nothing was happening.  Right around this big
delay there were messages about the TPM:

[    2.311352] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2
[    3.332790] tpm_tis_spi spi0.0: Cr50 firmware version: ...

I put a few printouts in and saw that tpm_tis_spi_init() (specifically
tpm_chip_register() in that function) was taking the lion's share of
this time, though ~115 ms of the time was in cr50_print_fw_version().

Let's make a one-line change to prefer async probe for tpm_tis_spi.
There's no reason we need to block other drivers from probing while we
load.

NOTES:
* It's possible that other hardware runs through the init sequence
  faster than Cr50 and this isn't such a big problem for them.
  However, even if they are faster they are still doing _some_
  transfers over a SPI bus so this should benefit everyone even if to
  a lesser extent.
* It's possible that there are extra delays in the code that could be
  optimized out.  I didn't dig since once I enabled async probe they
  no longer impacted me.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

The tpm2_get_cc_attrs_tbl() call will result in TPM commands being issued,
which will need the use of the internal command/response buffer.  But,
we're issuing this *before* we've waited to make sure that buffer is
allocated.

This can result in intermittent failures to probe if the hypervisor / TPM
implementation doesn't respond quickly enough.  I find it fails almost
every time with an 8 vcpu guest under KVM with software emulated TPM.

To fix it, just move the tpm2_get_cc_attrs_tlb() call after the
existing code to wait for initialization, which will ensure the buffer
is allocated.

Fixes: 18b3670d ("tpm: ibmvtpm: Add support for TPM2")
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Trivial fix, the spelling of "drescription" is incorrect
in function comment.

Fix this.
Signed-off-by: Binbin Zhou <zhoubinbin@uniontech.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Found by smatch:
drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn:
 variable dereferenced before check 'chip->ops' (see line 979)

'chip->ops' is assigned in the beginning of function
in tpmm_chip_alloc->tpm_chip_alloc
and is used before first possible goto to error path.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

During flow control we are just reading from the TPM, yet our spi_xfer
has the tx_buf and rx_buf both non-NULL which means we're requesting a
full duplex transfer.

SPI is always somewhat of a full duplex protocol anyway and in theory
the other side shouldn't really be looking at what we're sending it
during flow control, but it's still a bit ugly to be sending some
"random" data when we shouldn't.

The default tpm_tis_spi_flow_control() tries to address this by
setting 'phy->iobuf[0] = 0'.  This partially avoids the problem of
sending "random" data, but since our tx_buf and rx_buf both point to
the same place I believe there is the potential of us sending the
TPM's previous byte back to it if we hit the retry loop.

Another flow control implementation, cr50_spi_flow_control(), doesn't
address this at all.

Let's clean this up and just make the tx_buf NULL before we call
flow_control().  Not only does this ensure that we're not sending any
"random" bytes but it also possibly could make the SPI controller
behave in a slightly more optimal way.

NOTE: no actual observed problems are fixed by this patch--it's was
just made based on code inspection.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

It has been reported that some TIS based TPMs are giving unexpected
errors when using the O_NONBLOCK path of the TPM device. The problem
is that some TPMs don't like it when you get and then relinquish a
locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without
sending a command.  This currently happens all the time in the
O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops()
further down the code to after the O_NONBLOCK determination is made.
This is safe because the priv->buffer_mutex still protects the priv
state being modified.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275
Fixes: d23d1248 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: Mario Limonciello <Mario.Limonciello@dell.com>
Tested-by: Alex Guzman <alex@guzman.io>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

The freescale.com domain is gone for quite some time.

Use the nxp.com domain instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200701005346.1008-1-festevam@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

Pull hyperv fix from Wei Liu:
 "One patch from Joseph to make panic reporting contain more useful
  information"

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: Change flag to write log level in panic msg to false

Else there will be memory leak if alloc_disk() fails.

Fixes: 6a27b656 ("block: virtio-blk: support multi virt queues per virtio-blk device")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull exfat fixes from Namjae Jeon:

 - Zero out unused characters of FileName field to avoid a complaint
   from some fsck tool.

 - Fix memory leak on error paths.

 - Fix unnecessary VOL_DIRTY set when calling rmdir on non-empty
   directory.

 - Call sync_filesystem() for read-only remount (Fix generic/452 test in
   xfstests)

 - Add own fsync() to flush dirty metadata.

* tag 'exfat-for-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: flush dirty metadata in fsync
  exfat: move setting VOL_DIRTY over exfat_remove_entries()
  exfat: call sync_filesystem for read-only remount
  exfat: add missing brelse() calls on error paths
  exfat: Set the unused characters of FileName field to the value 0000h

Merge tag 'fixes-v5.8-rc3-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull security subsystem fixes from James Morris:
 "Two simple fixes for v5.8:

   - Fix hook iteration and default value for inode_copy_up_xattr
     (KP Singh)

   - Fix the key_permission LSM hook function type (Sami Tolvanen)"

* tag 'fixes-v5.8-rc3-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: Fix hook iteration and default value for inode_copy_up_xattr
  security: fix the key_permission LSM hook function type

Merge tag 'integrity-v5.8-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity updates from Mimi Zohar:
 "Include PCRs 8 & 9 in per TPM 2.0 bank boot_aggregate calculation.

  Prior to Linux 5.8 the SHA1 "boot_aggregate" value was padded with 0's
  and extended into the other TPM 2.0 banks.

  Included in the Linux 5.8 open window, TPM 2.0 PCR bank specific
  "boot_aggregate" values (PCRs 0  - 7) are calculated and extended into the TPM banks.

  Distro releases are now shipping grub2 with TPM support, which extend
  PCRs 8 & 9. I'd like for PCRs 8 & 9 to be included in the new
  "boot_aggregate" calculations.

  For backwards compatibility, if the hash is SHA1, these new PCRs are
  not included in the boot aggregate"

* tag 'integrity-v5.8-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: extend boot_aggregate with kernel measurements

Since 5.7, we've been using task_work to trigger async running of
requests in the context of the original task. This generally works
great, but there's a case where if the task is currently blocked
in the kernel waiting on a condition to become true, it won't process
task_work. Even though the task is woken, it just checks whatever
condition it's waiting on, and goes back to sleep if it's still false.

This is a problem if that very condition only becomes true when that
task_work is run. An example of that is the task registering an eventfd
with io_uring, and it's now blocked waiting on an eventfd read. That
read could depend on a completion event, and that completion event
won't get trigged until task_work has been run.

Use the TWA_SIGNAL notification for task_work, so that we ensure that
the task always runs the work when queued.

Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>

So that the target task will exit the wait_event_interruptible-like
loop and call task_work_run() asap.

The patch turns "bool notify" into 0,TWA_RESUME,TWA_SIGNAL enum, the
new TWA_SIGNAL flag implies signal_wake_up().  However, it needs to
avoid the race with recalc_sigpending(), so the patch also adds the
new JOBCTL_TASK_WORK bit included in JOBCTL_PENDING_MASK.

TODO: once this patch is merged we need to change all current users
of task_work_add(notify = true) to use TWA_RESUME.

Cc: stable@vger.kernel.org # v5.7
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Adjust the reg property to fix the following warning seen with
'make dt_binding_check':

Documentation/devicetree/bindings/thermal/ti,am654-thermal.example.dt.yaml: example-0: thermal@42050000:reg:0: [0, 1107623936, 0, 604] is too long
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630122527.28640-1-festevam@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

Remove the soc unit address to fix the following warnings seen with
'make dt_binding_check':

Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/thermal/thermal-zones.example.dts:23.20-50.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630121804.27887-1-festevam@gmail.com
[robh: also fix thermal-zones.yaml example]
Signed-off-by: Rob Herring <robh@kernel.org>

Pass the sysreg unit name to fix the following warning seen with
'make dt_binding_check':

Warning (unit_address_vs_reg): /example-0/sysreg: node has a reg or ranges property, but no unit name
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200629215500.18037-1-festevam@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

Remove the leading zeroes to fix the following warning seen with
'make dt_binding_check':

Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dts:37.33-42.23: Warning (unit_address_format): /example-0/usb-vhub@1e6a0000/vhub-strings/string@0409: unit name should not have leading 0s
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200629214027.16768-1-festevam@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

There are two processed schema files:

 - processed-schema-examples.yaml

    Used for 'make dt_binding_check'. This is always a full schema.

 - processed-schema.yaml

    Used for 'make dtbs_check'. This may be a full schema, or a smaller
    subset if DT_SCHEMA_FILES is given by a user.

If DT_SCHEMA_FILES is not specified, they are the same. You can copy
the former to the latter instead of running dt-mk-schema twice. This
saves the cpu time a lot when you do 'make dt_binding_check dtbs_check'
because building the full schema takes a couple of seconds.

If DT_SCHEMA_FILES is specified, processed-schema.yaml is generated
based on the specified yaml files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-4-masahiroy@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Currently, processed-schema.yaml is always built, but it is actually
used only for 'make dtbs_check'.

'make dt_binding_check' uses processed-schema-example.yaml instead.

Build processed-schema.yaml only for 'make dtbs_check'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-3-masahiroy@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

We are having more and more schema files.

Commit 8b6b8021 ("dt-bindings: Fix command line length limit
calling dt-mk-schema") fixed the 'Argument list too long' error of
the schema checks, but the same error happens while cleaning too.

'make clean' after 'make dt_binding_check' fails as follows:

  $ make dt_binding_check
    [ snip ]
  $ make clean
  make[2]: execvp: /bin/sh: Argument list too long
  make[2]: *** [scripts/Makefile.clean:52: __clean] Error 127
  make[1]: *** [scripts/Makefile.clean:66: Documentation/devicetree/bindings] Error 2
  make: *** [Makefile:1763: _clean_Documentation] Error 2

'make dt_binding_check' generates so many .example.dts, .dt.yaml files,
which are passed to the 'rm' command when you run 'make clean'.

I added a small hack to use the 'find' command to clean up most of the
build artifacts before they are processed by scripts/Makefile.clean
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-2-masahiroy@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Fix unit address to match the first address specified in the reg
property of the node in example.
Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com>
Link: https://lore.kernel.org/r/20200625135158.5861-1-l4stpr0gr4m@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

Since commit e69f5dc6 ("dt-bindings: serial: Convert 8250 to
json-schema"), the schema for "ns16550a" is checked.

'make dt_binding_check' emits the following warning:

  uart@5,00200000: $nodename:0: 'uart@5,00200000' does not match '^serial(@[0-9a-f,]+)*$'

Rename the node to follow the pattern defined in
Documentation/devicetree/bindings/serial/serial.yaml

While I was here, I removed leading zeros from unit names.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20200623113242.779241-1-yamada.masahiro@socionext.comSigned-off-by: Rob Herring <robh@kernel.org>

Sync with upstream dtc primarily to pickup the I2C bus check fixes. The
interrupt_provider check is noisy, so turn it off for now.

This adds the following commits from upstream:

9d7888cbf19c dtc: Consider one-character strings as strings
8259d59f59de checks: Improve i2c reg property checking
fdabcf2980a4 checks: Remove warning for I2C_OWN_SLAVE_ADDRESS
2478b1652c8d libfdt: add extern "C" for C++
f68bfc2668b2 libfdt: trivial typo fix
7be250b4d059 libfdt: Correct condition for reordering blocks
81e0919a3e21 checks: Add interrupt provider test
85e5d839847a Makefile: when building libfdt only, do not add unneeded deps
b28464a550c5 Fix some potential unaligned accesses in dtc
Signed-off-by: Rob Herring <robh@kernel.org>

It's better to use /bin/sh instead of /bin/bash in order to run the tests
in the BusyBox shell.

Fixes: 6ea3dfe1 ("selftests: add TPM 2.0 tests")
Cc: stable@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

'test -f' is suitable only for *regular* files. Use 'test -e' instead.

Cc: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Cc: linux-integrity@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Fixes: 5627f9cf ("Kernel selftests: Add check if TPM devices are supported")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>