- 12 Mar, 2018 14 commits
-
-
Christoph Fritz authored
This patch adds support for AUO G104SN02 V2 800x600 10.4" panel to DRM simple panel driver. Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1513430016.1930.4.camel@googlemail.com
-
Wei Yongjun authored
Fixes the following sparse warnings: drivers/gpu/drm/panel/panel-ilitek-ili9322.c:182:12: warning: symbol 'ili9322_inputs' was not declared. Should it be static? drivers/gpu/drm/panel/panel-ilitek-ili9322.c:343:28: warning: symbol 'ili9322_regmap_config' was not declared. Should it be static? Also change ili9322_inputs to 'const char * const' to avoid chackpatch warning. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
jan.tuerk@emtrion.com authored
emtrion is a system integrator and manufacturer of embedded systems. Website: https://www.emtrion.deSigned-off-by:
Jan Tuerk <jan.tuerk@emtrion.com> Reviewed-by:
Andreas Färber <afaerber@suse.de> Acked-by:
-
Philippe CORNU authored
Add SPDX identifiers to OriseTech OTM8009a panel driver. Signed-off-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
-
Baruch Siach authored
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Jagan Teki authored
This adds support for the Kaohsiung Opto-Electronics., TX31D200VM0BAA 12.3" HSXGA LVDS panel, which can be supported by the simple panel driver. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Reviewed-by:
-
Philippe CORNU authored
Add support for the optional power-supply. Note: A "dummy regulator" is returned by devm_regulator_get() if the optional regulator is not present in the device tree, simplifying the source code when enabling/disabling the regulator. Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Signed-off-by:
-
Philippe CORNU authored
Some boards use a dedicated voltage regulator for this panel. Add & document this related optional power-supply property. Signed-off-by:
-
Sean Paul authored
Convert the sharp lq123p1jx31 from using a fixed mode to specifying a display timing with min/typ/max values. This allows us to capture the timings set forth in the datasheet as well as the additional values that we've cleared with the display vendor to avoid interference with the digitizer on the Samsung Chromebook Plus (kevin). A follow-on patch will specify the override mode for kevin devices. Changes in v2: - None Changes in v3: - None Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-rockchip@lists.infradead.org Signed-off-by:
Sean Paul <seanpaul@chromium.org> Tested-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
Sean Paul authored
In preparation for a new subnode section in a follow-on patch, add explicit headings to the existings sections for simple-panel. Changes in v2: - Added Changes in v3: - None Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-rockchip@lists.infradead.org Signed-off-by:
-
Sean Paul authored
Add a note in the documentation explaining when it's appropriate to use the display-timings subnode on its own, as well as the preferred name to use (panel-timing). Changes in v3: - Added Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-rockchip@lists.infradead.org Signed-off-by:
-
Philippe CORNU authored
This patch adds Raydium Semiconductor Corporation RM68200 5.5" 720x1280 TFT LCD panel driver (MIPI-DSI video mode). Signed-off-by:
-
Philippe CORNU authored
The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD panel connected using a MIPI-DSI video interface. Reviewed-by:
-
Eric Anholt authored
This fixes bad color output. When I was first testing the device I had the DPI hardware set to 666 mode, but apparently in the refactor to use the bus_format information from the panel driver, I failed to actually update the panel. Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: e8b6f561 ("drm/panel: simple: Add the 7" DPI panel from Adafruit") Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
- 09 Mar, 2018 4 commits
-
-
Stefan Schake authored
Using the hint from the plane state, we turn on the background color to avoid display corruption from planes blending with the background. Changes from v1: - Use needs_bg_fill from plane state Signed-off-by:
Stefan Schake <stschake@gmail.com> Signed-off-by:
-
Stefan Schake authored
We need to reference it from the CRTC to make a decision for enabling background color fill. Signed-off-by:
-
Stefan Schake authored
Considering a single plane only, we have to enable background color when the plane has an alpha format and could be blending from the background or when it doesn't cover the entire screen. Changes from v1: - Drop unrelated change - Move needs_bg_fill to plane state Signed-off-by:
-
Stefan Schake authored
Alpha formats in DRM are assumed to be premultiplied, so we should be setting the PREMULT bit in the plane configuration for HVS. Changes from v1: - Use correct has_alpha Signed-off-by:
-
- 08 Mar, 2018 7 commits
-
-
Sean Paul authored
Instead of using timer and spinlocks, use delayed_work and mutexes for rockchip psr. This allows us to make blocking calls when enabling/disabling psr (which is sort of important given we're talking over dpcd to the display). Cc: Caesar Wang <wxt@rock-chips.com> Cc: 征增 王 <wzz@rock-chips.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180305222324.5872-3-enric.balletbo@collabora.com
-
zain wang authored
There's a race between when bridge_disable and when vop_crtc_disable are called. If the flush timer triggers a new psr work between these, we will operate eDP without power shutdowned by bridge_disable. In this case, moving activate/deactivate to enable/disable bridge to avoid it. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by:
zain wang <wzz@rock-chips.com> Signed-off-by:
Caesar Wang <wxt@rock-chips.com> Signed-off-by:
-
Jeffy Chen authored
The HDMI vpll clock should be enabled when bind() is called. So move the clk_prepare_enable of that clock to bind() function and add the missing clk_disable_unprepare() required in error handling path and unbind(). Fixes: 12b9f204 ("drm: bridge/dw_hdmi: add rockchip rk3288 support") Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Jeffy Chen authored
In bind the clk_prepare_enable of the HDMI pclk is called before adding the i2c_adapter. So it should be the other way around in unbind, first remove the i2c_adapter and then call the clk_disable_unprepare. Fixes: 412d4ae6 ("drm/rockchip: hdmi: add Innosilicon HDMI support") Signed-off-by:
-
Jeffy Chen authored
Add missing error handling in bind(). Fixes: 412d4ae6 ("drm/rockchip: hdmi: add Innosilicon HDMI support") Signed-off-by:
-
Jeffy Chen authored
In bind()'s error handling path call destroy functions instead of cleanup functions for encoder and connector and reorder to match how is called in bind(). In unbind() call the connector and encoder destroy functions. Signed-off-by:
-
Ville Syrjälä authored
Replace the ad-hoc iturbt_709 property with the new standard COLOR_ENCODING property. Compiles, but not tested. v2: Fix typos (Ilia) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: nouveau@lists.freedesktop.org Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220134816.15229-1-ville.syrjala@linux.intel.comReviewed-by:
Ilia Mirkin <imirkin@alum.mit.edu> Acked-by: Ben Skeggs <bskeggs@redhat.com> #irc
-
- 07 Mar, 2018 15 commits
-
-
Linus Walleij authored
We were previously selecting 1024x768 and 32BPP as the default set-up for the PL111 consumers. This does not work on elder systems: the device tree bindings support a property "max-memory-bandwidth" in bytes/second that states that if you exceed this the memory bus will saturate. The result is flickering and unstable images. Parse the "max-memory-bandwidth" and respect it when intializing the driver. On the RealView PB11MP, Versatile and Integrator/CP we get a nice console as default with this code. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180307215819.15814-1-linus.walleij@linaro.org
-
Linus Walleij authored
The following happens when connection a DVI output driven from the SiI9022 using a DVI-to-VGA adapter plug: i2c i2c-0: sendbytes: NAK bailout. i2c i2c-0: sendbytes: NAK bailout. Then no picture. Apparently the I2C engine inside the SiI9022 is not smart enough to try to fall back to DDC I2C. Or the vendor have not integrated the electronics properly. I don't know which one it is. After this, the I2C bus seems stalled and the first attempt to read the status register fails, and the code returns with negative return value, and the display fails to initialized. Instead, retry status readout five times and continue even if this fails. Tested on the ARM Versatile Express with a DVI-to-VGA connector, it now gives picture. Introduce a helper struct device *dev variable to make the code more readable. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
-
Linus Walleij authored
We want to cut down the default bpp to 16 on the RealView so we can have a 1024x768 framebuffer console by default. The memory bandwidth limitations makes this not work with the PL111 default of 32bpp. This builds on top of the earlier patches making the framebuffer default bpp a per-variant variable. Reviewed-by:
-
Linus Walleij authored
The PL110, Integrator and Versatile boards strongly prefer to use 16 BPP even if other modes are supported, both to keep down memory consumption and also to easier find a good match to supported resolutions with consideration taken to the memory bandwidth of the platforms. Reviewed-by:
-
Linus Walleij authored
This fixes up the .mode_valid() vtable entry documentation by copyediting the documentation from the .mode_valid() documentation in the drm_modeset_helper_vtables.h file. Fixes: 40275dc4 ("drm: simple_kms_helper: Add mode_valid() callback support") Suggested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Linus Walleij authored
It's better if we explain a bit that this pertains to non-programmable VGA DAC bridges. Reviewed-by:
-
Shirish S authored
Add reverse iterator for_each_oldnew_plane_in_state_reverse to compliment the for_each_oldnew_plane_in_state way or reading plane states. The plane states are required to be read in reverse order for amd drivers, cause the z order convention followed in linux is opposite to how the planes are supposed to be presented to DC engine, which is in common to both windows and linux. V2: fix compile time errors due to -Werror flag. Signed-off-by:
Shirish S <shirish.s@amd.com> Signed-off-by:
Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520392203-6885-1-git-send-email-shirish.s@amd.com
-
Ville Syrjälä authored
Pimp drm_property_type_valid() to check for more fails with the property flags. Also make the check before adding the property, and bail out if things look bad. Since we're now chekcing for more than the type let's also change the function name to drm_property_flags_valid(). Signed-off-by:
-
Ville Syrjälä authored
The property flags are part of the uabi and we have 32 bits for them. Pass them around as u32 internally as well, instead of a signed int. Signed-off-by:
-
Ville Syrjälä authored
DRM_MODE_PROP_PENDING is not used anywhere (except printed out by libdrm proptest/modetest). This seems to be yet another thing blindly copied from xrandr. Quoting from the protocol spec: "If 'pending' is TRUE, changes made to property values with RRChangeOutputProperty will be saved in the pending property value and be automatically copied to the current value on the next RRSetCrtcConfig request involving the named output. If 'pending' is FALSE, changes are copied immediately." So it was some kind of early idea for atomic property updates. Signed-off-by:
-
Ville Syrjälä authored
Enum values >63 with a bitmask property is a programmer error. WARN when someone is attempting this. Signed-off-by:
-
Ville Syrjälä authored
Trying to add enum values to non-enum/bitmask properties is a programmer mistake. WARN to make sure the developers notice their mistake. Signed-off-by:
-
Ville Syrjälä authored
If the property already has the enum value WARN and bail. Replacing enum values doesn't make sense to me. Throw out the pointless list_empty() while at it. Cc: Daniel Vetter <daniel@ffwll.ch> Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Marek Szyprowski authored
If there is another bridge after analogix_dp, then the connector object should not be created. This fixes following timeouts on Exynos5420-based Chromebook2 Peach-PIT board during boot: exynos-dp 145b0000.dp-controller: AUX CH cmd reply timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180305085741.18896-4-m.szyprowski@samsung.com
-
Marek Szyprowski authored
Enabling runtime power management early in analogix_dp_bind() causes following kernel NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 000007d8 pgd = 28ffa2e4 [000007d8] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 6 PID: 69 Comm: kworker/6:1 Not tainted 4.16.0-rc1-00062-ge25751974ba8 #3622 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events deferred_probe_work_func PC is at analogix_dp_resume+0x8/0xc0 LR is at pm_generic_runtime_resume+0x2c/0x38 pc : [<c0531b98>] lr : [<c0543fec>] psr: a0000113 sp : ee13fbd8 ip : 0000001a fp : 00000001 r10: ee0eb080 r9 : c0552bd8 r8 : c0fb1d98 r7 : eebb1010 r6 : eeae9808 r5 : 00000000 r4 : d4850415 r3 : ee0ed010 r2 : b2d05e00 r1 : 00000000 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 2000406a DAC: 00000051 Process kworker/6:1 (pid: 69, stack limit = 0x913205b4) Stack: (0xee13fbd8 to 0xee140000) ... [<c0531b98>] (analogix_dp_resume) from [<c0543fec>] (pm_generic_runtime_resume+0x2c/0x38) [<c0543fec>] (pm_generic_runtime_resume) from [<c054ffb4>] (__genpd_runtime_resume+0x2c/0x8c) [<c054ffb4>] (__genpd_runtime_resume) from [<c0552d24>] (genpd_runtime_resume+0x14c/0x258) [<c0552d24>] (genpd_runtime_resume) from [<c0547798>] (__rpm_callback+0x134/0x214) [<c0547798>] (__rpm_callback) from [<c0547898>] (rpm_callback+0x20/0x80) [<c0547898>] (rpm_callback) from [<c0546ff4>] (rpm_resume+0x3a0/0x734) [<c0546ff4>] (rpm_resume) from [<c05475ec>] (__pm_runtime_resume+0x64/0x9c) [<c05475ec>] (__pm_runtime_resume) from [<c053b95c>] (__device_attach+0x8c/0x134) [<c053b95c>] (__device_attach) from [<c053ad08>] (bus_probe_device+0x88/0x90) [<c053ad08>] (bus_probe_device) from [<c05390d0>] (device_add+0x3a8/0x580) [<c05390d0>] (device_add) from [<c06764c4>] (i2c_register_adapter+0xd4/0x3ec) [<c06764c4>] (i2c_register_adapter) from [<c05321c8>] (analogix_dp_bind+0x2a0/0x410) [<c05321c8>] (analogix_dp_bind) from [<c0528e90>] (exynos_dp_bind+0x9c/0x12c) [<c0528e90>] (exynos_dp_bind) from [<c0535bc4>] (component_bind_all+0xfc/0x258) [<c0535bc4>] (component_bind_all) from [<c0522ee8>] (exynos_drm_bind+0x15c/0x28c) [<c0522ee8>] (exynos_drm_bind) from [<c0536378>] (try_to_bring_up_master+0x1b8/0x29c) [<c0536378>] (try_to_bring_up_master) from [<c05364fc>] (component_add+0xa0/0x170) [<c05364fc>] (component_add) from [<c0528fe4>] (exynos_dp_probe+0x64/0xb8) [<c0528fe4>] (exynos_dp_probe) from [<c053debc>] (platform_drv_probe+0x50/0xb0) [<c053debc>] (platform_drv_probe) from [<c053bd18>] (driver_probe_device+0x2b8/0x4a0) [<c053bd18>] (driver_probe_device) from [<c0539e4c>] (bus_for_each_drv+0x44/0x8c) [<c0539e4c>] (bus_for_each_drv) from [<c053b970>] (__device_attach+0xa0/0x134) [<c053b970>] (__device_attach) from [<c053ad08>] (bus_probe_device+0x88/0x90) [<c053ad08>] (bus_probe_device) from [<c053b258>] (deferred_probe_work_func+0x3c/0x168) [<c053b258>] (deferred_probe_work_func) from [<c014352c>] (process_one_work+0x1d0/0x7bc) [<c014352c>] (process_one_work) from [<c0143b84>] (worker_thread+0x34/0x4dc) [<c0143b84>] (worker_thread) from [<c014a30c>] (kthread+0x128/0x164) [<c014a30c>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xee13ffb0 to 0xee13fff8) ffa0: 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e2800e37 eafee601 e92d4070 e1a05000 (e59067d8) ---[ end trace bf6046013df7cab2 ]--- This oops happens, because analogix_dp_bind() calls drm_dp_aux_register() which registers i2c adapter. I2C core tries to runtime get i2c host device during registration. This ends in analogix_dp_resume(), but dp context is NULL there. dp context is set in exynos_dp_bind() after executing analogix_dp_bind(). Fix this issue by postponing enabling runtime power management after drm_dp_aux_register(). Signed-off-by:
-
