- 31 Jan, 2016 40 commits
-
-
Sven Eckelmann authored
[ Upstream commit 63b39927 ] The batadv_claim_free_ref function uses call_rcu to delay the free of the batadv_bla_claim object until no (already started) rcu_read_lock is enabled anymore. This makes sure that no context is still trying to access the object which should be removed. But batadv_bla_claim also contains a reference to backbone_gw which must be removed. The reference drop of backbone_gw was done in the call_rcu function batadv_claim_free_rcu but should actually be done in the batadv_claim_release function to avoid nested call_rcus. This is important because rcu_barrier (e.g. batadv_softif_free or batadv_exit) will not detect the inner call_rcu as relevant for its execution. Otherwise this barrier will most likely be inserted in the queue before the callback of the first call_rcu was executed. The caller of rcu_barrier will therefore continue to run before the inner call_rcu callback finished. Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Acked-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ido Schimmel authored
[ Upstream commit 60a6531b ] We can't be within an RCU read-side critical section when deleting VLANs, as underlying drivers might sleep during the hardware operation. Therefore, replace the RCU critical section with a mutex. This is consistent with team_vlan_rx_add_vid. Fixes: 3d249d4c ("net: introduce ethernet teaming device") Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Doron Tsur authored
[ Upstream commit 0b6e26ce ] With several ConnectX-4 cards installed on a server, one may receive irqn > 255 from the kernel API, which we mistakenly trim to 8bit. This causes EQ creation failure with the following stack trace: [<ffffffff812a11f4>] dump_stack+0x48/0x64 [<ffffffff810ace21>] __setup_irq+0x3a1/0x4f0 [<ffffffff810ad7e0>] request_threaded_irq+0x120/0x180 [<ffffffffa0923660>] ? mlx5_eq_int+0x450/0x450 [mlx5_core] [<ffffffffa0922f64>] mlx5_create_map_eq+0x1e4/0x2b0 [mlx5_core] [<ffffffffa091de01>] alloc_comp_eqs+0xb1/0x180 [mlx5_core] [<ffffffffa091ea99>] mlx5_dev_init+0x5e9/0x6e0 [mlx5_core] [<ffffffffa091ec29>] init_one+0x99/0x1c0 [mlx5_core] [<ffffffff812e2afc>] local_pci_probe+0x4c/0xa0 Fixing it by changing of the irqn type from u8 to unsigned int to support values > 255 Fixes: 61d0e73e ('net/mlx5_core: Use the the real irqn in eq->irqn') Reported-by:
Doron Tsur <doront@mellanox.com> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit c6894dec ] After promisc mode management was introduced a bridge device could do dev_set_promiscuity from its ndo_change_rx_flags() callback which in turn can be called after the bridge's addr_list_lock has been taken (e.g. by dev_uc_add). This causes a false positive lockdep splat because the port interfaces' addr_list_lock is taken when br_manage_promisc() runs after the bridge's addr list lock was already taken. To remove the false positive introduce a custom bridge addr_list_lock class and set it on bridge init. A simple way to reproduce this is with the following: $ brctl addbr br0 $ ip l add l br0 br0.100 type vlan id 100 $ ip l set br0 up $ ip l set br0.100 up $ echo 1 > /sys/class/net/br0/bridge/vlan_filtering $ brctl addif br0 eth0 Splat: [ 43.684325] ============================================= [ 43.684485] [ INFO: possible recursive locking detected ] [ 43.684636] 4.4.0-rc8+ #54 Not tainted [ 43.684755] --------------------------------------------- [ 43.684906] brctl/1187 is trying to acquire lock: [ 43.685047] (_xmit_ETHER){+.....}, at: [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.685460] but task is already holding lock: [ 43.685618] (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.686015] other info that might help us debug this: [ 43.686316] Possible unsafe locking scenario: [ 43.686743] CPU0 [ 43.686967] ---- [ 43.687197] lock(_xmit_ETHER); [ 43.687544] lock(_xmit_ETHER); [ 43.687886] *** DEADLOCK *** [ 43.688438] May be due to missing lock nesting notation [ 43.688882] 2 locks held by brctl/1187: [ 43.689134] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81510317>] rtnl_lock+0x17/0x20 [ 43.689852] #1: (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.690575] stack backtrace: [ 43.690970] CPU: 0 PID: 1187 Comm: brctl Not tainted 4.4.0-rc8+ #54 [ 43.691270] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 43.691770] ffffffff826a25c0 ffff8800369fb8e0 ffffffff81360ceb ffffffff826a25c0 [ 43.692425] ffff8800369fb9b8 ffffffff810d0466 ffff8800369fb968 ffffffff81537139 [ 43.693071] ffff88003a08c880 0000000000000000 00000000ffffffff 0000000002080020 [ 43.693709] Call Trace: [ 43.693931] [<ffffffff81360ceb>] dump_stack+0x4b/0x70 [ 43.694199] [<ffffffff810d0466>] __lock_acquire+0x1e46/0x1e90 [ 43.694483] [<ffffffff81537139>] ? netlink_broadcast_filtered+0x139/0x3e0 [ 43.694789] [<ffffffff8153b5da>] ? nlmsg_notify+0x5a/0xc0 [ 43.695064] [<ffffffff810d10f5>] lock_acquire+0xe5/0x1f0 [ 43.695340] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.695623] [<ffffffff815edea5>] _raw_spin_lock_bh+0x45/0x80 [ 43.695901] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.696180] [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.696460] [<ffffffff8150189c>] dev_set_promiscuity+0x3c/0x50 [ 43.696750] [<ffffffffa0586845>] br_port_set_promisc+0x25/0x50 [bridge] [ 43.697052] [<ffffffffa05869aa>] br_manage_promisc+0x8a/0xe0 [bridge] [ 43.697348] [<ffffffffa05826ee>] br_dev_change_rx_flags+0x1e/0x20 [bridge] [ 43.697655] [<ffffffff81501532>] __dev_set_promiscuity+0x132/0x1f0 [ 43.697943] [<ffffffff81501672>] __dev_set_rx_mode+0x82/0x90 [ 43.698223] [<ffffffff815072de>] dev_uc_add+0x5e/0x80 [ 43.698498] [<ffffffffa05b3c62>] vlan_device_event+0x542/0x650 [8021q] [ 43.698798] [<ffffffff8109886d>] notifier_call_chain+0x5d/0x80 [ 43.699083] [<ffffffff810988b6>] raw_notifier_call_chain+0x16/0x20 [ 43.699374] [<ffffffff814f456e>] call_netdevice_notifiers_info+0x6e/0x80 [ 43.699678] [<ffffffff814f4596>] call_netdevice_notifiers+0x16/0x20 [ 43.699973] [<ffffffffa05872be>] br_add_if+0x47e/0x4c0 [bridge] [ 43.700259] [<ffffffffa058801e>] add_del_if+0x6e/0x80 [bridge] [ 43.700548] [<ffffffffa0588b5f>] br_dev_ioctl+0xaf/0xc0 [bridge] [ 43.700836] [<ffffffff8151a7ac>] dev_ifsioc+0x30c/0x3c0 [ 43.701106] [<ffffffff8151aac9>] dev_ioctl+0xf9/0x6f0 [ 43.701379] [<ffffffff81254345>] ? mntput_no_expire+0x5/0x450 [ 43.701665] [<ffffffff812543ee>] ? mntput_no_expire+0xae/0x450 [ 43.701947] [<ffffffff814d7b02>] sock_do_ioctl+0x42/0x50 [ 43.702219] [<ffffffff814d8175>] sock_ioctl+0x1e5/0x290 [ 43.702500] [<ffffffff81242d0b>] do_vfs_ioctl+0x2cb/0x5c0 [ 43.702771] [<ffffffff81243079>] SyS_ioctl+0x79/0x90 [ 43.703033] [<ffffffff815eebb6>] entry_SYSCALL_64_fastpath+0x16/0x7a CC: Vlad Yasevich <vyasevic@redhat.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Bridge list <bridge@lists.linux-foundation.org> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 2796d0c6 ("bridge: Automatically manage port promiscuous mode.") Reported-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 34ae6a1a ] When a tunnel decapsulates the outer header, it has to comply with RFC 6080 and eventually propagate CE mark into inner header. It turns out IP6_ECN_set_ce() does not correctly update skb->csum for CHECKSUM_COMPLETE packets, triggering infamous "hw csum failure" messages and stack traces. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Rabin Vincent authored
[ Upstream commit 229394e8 ] On ARM64, a BUG() is triggered in the eBPF JIT if a filter with a constant shift that can't be encoded in the immediate field of the UBFM/SBFM instructions is passed to the JIT. Since these shifts amounts, which are negative or >= regsize, are invalid, reject them in the eBPF verifier and the classic BPF filter checker, for all architectures. Signed-off-by:
Rabin Vincent <rabin@rab.in> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7aaed57c ] Ivaylo Dimitrov reported a regression caused by commit 7866a621 ("dev: add per net_device packet type chains"). skb->dev becomes NULL and we crash in __netif_receive_skb_core(). Before above commit, different kind of bugs or corruptions could happen without major crash. But the root cause is that phonet_rcv() can queue skb without checking if skb is shared or not. Many thanks to Ivaylo Dimitrov for his help, diagnosis and tests. Reported-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by:
-
Lars Persson authored
[ Upstream commit d4618732 ] The offset inside the fragment was not used for the dma address and silent data corruption resulted because TSO makes the checksum match. Fixes: 077742da ("dwc_eth_qos: Add support for Synopsys DWC Ethernet QoS") Signed-off-by:
Lars Persson <larper@axis.com> Signed-off-by:
-
Karl Heiss authored
[ Upstream commit 03d84a5f ] Commit 1f718f0f ("bonding: populate neighbour's private on enslave") undoes the fix provided by commit c2edacf8 ("bonding / ipv6: no addrconf for slaves separately from master") by effectively setting the slave flag after the slave has been opened. If the slave comes up quickly enough, it will go through the IPv6 addrconf before the slave flag has been set and will get a link local IPv6 address. In order to ensure that addrconf knows to ignore the slave devices on state change, set IFF_SLAVE before dev_open() during bonding enslavement. Fixes: 1f718f0f ("bonding: populate neighbour's private on enslave") Signed-off-by:
Karl Heiss <kheiss@gmail.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 9207f9d4 ] Skb_gso_segment() uses skb control block during segmentation. This patch adds 32-bytes room for previous control block which will be copied into all resulting segments. This patch fixes kernel crash during fragmenting forwarded packets. Fragmentation requires valid IP CB in skb for clearing ip options. Also patch removes custom save/restore in ovs code, now it's redundant. Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Link: http://lkml.kernel.org/r/CALYGNiP-0MZ-FExV2HutTvE9U-QQtkKSoE--KN=JQE5STYsjAA@mail.gmail.comSigned-off-by:
-
Michal Kubeček authored
[ Upstream commit 40ba3302 ] Commit acf8dd0a ("udp: only allow UFO for packets from SOCK_DGRAM sockets") disallows UFO for packets sent from raw sockets. We need to do the same also for SOCK_DGRAM sockets with SO_NO_CHECK options, even if for a bit different reason: while such socket would override the CHECKSUM_PARTIAL set by ip_ufo_append_data(), gso_size is still set and bad offloading flags warning is triggered in __skb_gso_segment(). In the IPv6 case, SO_NO_CHECK option is ignored but we need to disallow UFO for packets sent by sockets with UDP_NO_CHECK6_TX option. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Tested-by:
Shannon Nelson <shannon.nelson@intel.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
John Fastabend authored
[ Upstream commit 3de03596 ] Fix possible null pointer dereference that may occur when calling skb_reserve() on a null skb. Fixes: 879c7220 ("net: pktgen: Observe needed_headroom of the device") Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
Jamal Hadi Salim authored
[ Upstream commit 66530bdf ] only when user space passes the addresses should we consider their presence Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 83d15e70 ] For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno and CUBIC, per RFC 5681 (equation 4). tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh value if the intended reduction is as big or bigger than the current cwnd. Congestion control modules should never return a zero or negative ssthresh. A zero ssthresh generally results in a zero cwnd, causing the connection to stall. A negative ssthresh value will be interpreted as a u32 and will set a target cwnd for PRR near 4 billion. Oleksandr Natalenko reported that a system using tcp_yeah with ECN could see a warning about a prior_cwnd of 0 in tcp_cwnd_reduction(). Testing verified that this was due to tcp_yeah_ssthresh() misbehaving in this way. Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 3e4006f0 ] When first SYNACK is sent, we already hold rcu_read_lock(), but this is not true if a SYNACK is retransmitted, as a timer (soft) interrupt does not hold rcu_read_lock() Fixes: 45f6fad8 ("ipv6: add complete rcu protection around np->opt") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 320f1a4a ] proc_dostring() needs an initialized destination string, while the one provided in proc_sctp_do_hmac_alg() contains stack garbage. Thus, writing to cookie_hmac_alg would strlen() that garbage and end up accessing invalid memory. Fixes: 3c68198e ("sctp: Make hmac algorithm selection for cookie generation dynamic") Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 07b9b37c ] When a vxlan interface is created, the driver checks that there is not another vxlan interface with the same properties. To do this, it checks the existing vxlan udp socket. Since commit 1c51a915, the creation of the vxlan socket is done only when the interface is set up, thus it breaks that test. Example: $ ip l a vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip l a vxlan11 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip -br l | grep vxlan vxlan10 DOWN f2:55:1c:6a:fb:00 <BROADCAST,MULTICAST> vxlan11 DOWN 7a:cb:b9:38:59:0d <BROADCAST,MULTICAST> Instead of checking sockets, let's loop over the vxlan iface list. Fixes: 1c51a915 ("vxlan: fix race caused by dropping rtnl_unlock") Reported-by:
Thomas Faivre <thomas.faivre@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
willy tarreau authored
[ Upstream commit 712f4aad ] It is possible for a process to allocate and accumulate far more FDs than the process' limit by sending them over a unix socket then closing them to keep the process' fd count low. This change addresses this problem by keeping track of the number of FDs in flight per user and preventing non-privileged processes from having more FDs in flight than their configured FD limit. Reported-by: socketpair@gmail.com Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Mitigates: CVE-2013-4312 (Linux 2.0+) Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Oliver Neukum authored
commit 1eaf35e4 upstream. The module should fail to load. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Lu Baolu authored
commit bf5ce5bf upstream. Commit 655fe4ef ("usbcore: add sysfs support to xHCI usb3 hardware LPM") introduced usb3_hardware_lpm sysfs node. This doesn't show the correct status of USB3 U1 and U2 LPM status. This patch fixes this by replacing usb3_hardware_lpm with two nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2 (for U2), and recording the U1/U2 LPM status in right places. This patch should be back-ported to kernels as old as 4.3, that contains Commit 655fe4ef ("usbcore: add sysfs support to xHCI usb3 hardware LPM"). Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Oliver Freyermuth authored
commit f7d7f59a upstream. Add the USB device ID for ELV Marble Sound Board 1. Signed-off-by:
Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Peter Wu authored
commit 17bc5586 upstream. Free skb for received frames with a wrong checksum. This can happen pretty rapidly, exhausting all memory. This fixes a memleak (detected with kmemleak). Originally found while using monitor mode, but it also appears during managed mode (once the link is up). Signed-off-by:
Peter Wu <peter@lekensteyn.nl> ACKed-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Vinod Koul authored
commit a1068045 upstream. The detection of direction for compress was only taking into account codec capabilities and not CPU ones. Fix this by checking the CPU side capabilities as well Tested-by:
Ashish Panwar <ashish.panwar@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Charles Keepax authored
commit 24338722 upstream. We don't want to use a bypassed write in wm5110_clear_pga_volume, we might disable the DRE whilst the CODEC is powered down. A normal regmap_write will always go to the hardware (when not on cache_only) even if the written value matches the cache. As using a normal write will still achieve the desired behaviour of bring the cache and hardware in sync, this patch updates the function to use a normal write, which avoids issues when the CODEC is powered down. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Takashi Iwai authored
commit 230323da upstream. Currently ALSA timer device doesn't take the disconnection into account very well; it merely unlinks the timer device at disconnection callback but does nothing else. Because of this, when an application accessing the timer device is disconnected, it may release the resource before actually closed. In most cases, it results in a warning message indicating a leftover timer instance like: ALSA: timer xxxx is busy? But basically this is an open race. This patch tries to address it. The strategy is like other ALSA devices: namely, - Manage card's refcount at each open/close - Wake up the pending tasks at disconnection - Check the shutdown flag appropriately at each possible call Note that this patch has one ugly hack to handle the wakeup of pending tasks. It'd be cleaner to introduce a new disconnect op to snd_timer_instance ops. But since it would lead to internal ABI breakage and it eventually increase my own work when backporting to stable kernels, I took a different path to implement locally in timer.c. A cleanup patch will follow at next for 4.5 kernel. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109431Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 991f86d7 upstream. As HD-audio driver does deferred probe internally via workqueue, the driver might go into the mixed state doing both probe and remove when the module gets unloaded during the probe work. This eventually triggers an Oops, unsurprisingly. For avoiding this race, we just need to flush the pending probe work explicitly before actually starting the resource release. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=960710Signed-off-by:
-
Takashi Iwai authored
commit bca8e988 upstream. When the generic codec driver is specified via model option or such, the hda driver doesn't try to load the generic driver module but still loads the codec-specific driver, and this ends up with the binding failure. This patch fixes it by moving the generic module request in the common helper code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021Signed-off-by:
-
Takashi Iwai authored
commit db8948e6 upstream. ASUS N550JX (PCI SSID 1043:13df) requires the same fixup for a bass speaker output pin as other N550 models. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110001Signed-off-by:
-
Takashi Iwai authored
commit c0bcdbdf upstream. When a TLV ioctl with numid zero is handled, the driver may spew a kernel warning with a stack trace at each call. The check was intended obviously only for a kernel driver, but not for a user interaction. Let's fix it. This was spotted by syzkaller fuzzer. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Takashi Iwai authored
commit 2ba1fe7a upstream. hrtimer_cancel() waits for the completion from the callback, thus it must not be called inside the callback itself. This was already a problem in the past with ALSA hrtimer driver, and the early commit [fcfdebe7: ALSA: hrtimer - Fix lock-up] tried to address it. However, the previous fix is still insufficient: it may still cause a lockup when the ALSA timer instance reprograms itself in its callback. Then it invokes the start function even in snd_timer_interrupt() that is called in hrtimer callback itself, results in a CPU stall. This is no hypothetical problem but actually triggered by syzkaller fuzzer. This patch tries to fix the issue again. Now we call hrtimer_try_to_cancel() at both start and stop functions so that it won't fall into a deadlock, yet giving some chance to cancel the queue if the functions have been called outside the callback. The proper hrtimer_cancel() is called in anyway at closing, so this should be enough. Reported-and-tested-by:
-
Nicolas Boichat authored
commit 43c54b8c upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_pcm_hw_params32 to a struct snd_pcm_hw_params, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. This actually leads to an out-of-bounds memory access later on in sound/soc/soc-pcm.c:soc_pcm_hw_params() (detected using KASan). Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Signed-off-by:
-
Nicolas Boichat authored
commit 9586495d upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_seq_port_info32 to a struct snd_seq_port_info, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by:
-
Takashi Iwai authored
commit cf52103a upstream. Another Dell model, another fixup entry: Latitude E6540 needs the same fixup as other Latitude E series as workaround for noise problems. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=104341Signed-off-by:
-
Takashi Iwai authored
commit ee8413b0 upstream. ALSA timer instance object has a couple of linked lists and they are unlinked unconditionally at snd_timer_stop(). Meanwhile snd_timer_interrupt() unlinks it, but it calls list_del() which leaves the element list itself unchanged. This ends up with unlinking twice, and it was caught by syzkaller fuzzer. The fix is to use list_del_init() variant properly there, too. Reported-by:
-
Takashi Iwai authored
commit af368027 upstream. ALSA timer ioctls have an open race and this may lead to a use-after-free of timer instance object. A simplistic fix is to make each ioctl exclusive. We have already tread_sem for controlling the tread, and extend this as a global mutex to be applied to each ioctl. The downside is, of course, the worse concurrency. But these ioctls aren't to be parallel accessible, in anyway, so it should be fine to serialize there. Reported-by:
-
Hui Wang authored
commit 0a1f90a9 upstream. The machine uses codec alc255, and the pin configuration value for pin 0x14 on this machine is 0x90171130 which is not in the pin quirk table yet. BugLink: https://bugs.launchpad.net/bugs/1533461Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Takashi Iwai authored
commit b5a663aa upstream. A slave timer instance might be still accessible in a racy way while operating the master instance as it lacks of locking. Since the master operation is mostly protected with timer->lock, we should cope with it while changing the slave instance, too. Also, some linked lists (active_list and ack_list) of slave instances aren't unlinked immediately at stopping or closing, and this may lead to unexpected accesses. This patch tries to address these issues. It adds spin lock of timer->lock (either from master or slave, which is equivalent) in a few places. For avoiding a deadlock, we ensure that the global slave_active_lock is always locked at first before each timer lock. Also, ack and active_list of slave instances are properly unlinked at snd_timer_stop() and snd_timer_close(). Last but not least, remove the superfluous call of _snd_timer_stop() at removing slave links. This is a noop, and calling it may confuse readers wrt locking. Further cleanup will follow in a later patch. Actually we've got reports of use-after-free by syzkaller fuzzer, and this hopefully fixes these issues. Reported-by:
-
Takashi Iwai authored
commit c4a359a0 upstream. The commit [da6d2769: ALSA: usb-audio: Add resume support for Native Instruments controls] brought a regression where the Native Instrument audio devices don't get the correct value at update due to the missing shift at writing. This patch addresses it. Fixes: da6d2769 ('ALSA: usb-audio: Add resume support for Native Instruments controls') Reported-and-tested-by:
Owen Williams <owilliams@mixxx.org> Signed-off-by:
-
Takashi Iwai authored
commit 98070576 upstream. Dell Latitude E5550 (1028:062c) has a white noise problem like other Latitude E models, and it gets fixed by the very same quirk as well. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110591Signed-off-by:
-
Takashi Iwai authored
commit 3567eb6a upstream. ALSA sequencer code has an open race between the timer setup ioctl and the close of the client. This was triggered by syzkaller fuzzer, and a use-after-free was caught there as a result. This patch papers over it by adding a proper queue->timer_mutex lock around the timer-related calls in the relevant code path. Reported-by:
-
