Skip to content

L
linux
Switch branch/tag
  1. 11 Apr, 2016 17 commits
  3. 30 Mar, 2016 5 commits
    • Christian Borntraeger's avatar
      kernel: Provide READ_ONCE and ASSIGN_ONCE · b5be8baf
      Christian Borntraeger authored 
      commit 230fa253 upstream.

ACCESS_ONCE does not work reliably on non-scalar types. For
example gcc 4.6 and 4.7 might remove the volatile tag for such
accesses during the SRA (scalar replacement of aggregates) step
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145)

Let's provide READ_ONCE/ASSIGN_ONCE that will do all accesses via
scalar types as suggested by Linus Torvalds. Accesses larger than
the machines word size cannot be guaranteed to be atomic. These
macros will use memcpy and emit a build warning.
Signed-off-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      b5be8baf
    • Eric W. Biederman's avatar
      umount: Do not allow unmounting rootfs. · e1ce59d2
      Eric W. Biederman authored 
      commit da362b09 upstream.

Andrew Vagin <avagin@parallels.com> writes:

> #define _GNU_SOURCE
> #include <sys/types.h>
> #include <sys/stat.h>
> #include <fcntl.h>
> #include <sched.h>
> #include <unistd.h>
> #include <sys/mount.h>
>
> int main(int argc, char **argv)
> {
> 	int fd;
>
> 	fd = open("/proc/self/ns/mnt", O_RDONLY);
> 	if (fd < 0)
> 	   return 1;
> 	   while (1) {
> 	   	 if (umount2("/", MNT_DETACH) ||
> 		        setns(fd, CLONE_NEWNS))
> 					break;
> 					}
>
> 					return 0;
> }
>
> root@ubuntu:/home/avagin# gcc -Wall nsenter.c -o nsenter
> root@ubuntu:/home/avagin# strace ./nsenter
> execve("./nsenter", ["./nsenter"], [/* 22 vars */]) = 0
> ...
> open("/proc/self/ns/mnt", O_RDONLY)     = 3
> umount("/", MNT_DETACH)                 = 0
> setns(3, 131072)                        = 0
> umount("/", MNT_DETACH
>
causes:

> [  260.548301] ------------[ cut here ]------------
> [  260.550941] kernel BUG at /build/buildd/linux-3.13.0/fs/pnode.c:372!
> [  260.552068] invalid opcode: 0000 [#1] SMP
> [  260.552068] Modules linked in: xt_CHECKSUM iptable_mangle xt_tcpudp xt_addrtype xt_conntrack ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack bridge stp llc dm_thin_pool dm_persistent_data dm_bufio dm_bio_prison iptable_filter ip_tables x_tables crct10dif_pclmul crc32_pclmul ghash_clmulni_intel binfmt_misc nfsd auth_rpcgss nfs_acl aesni_intel nfs lockd aes_x86_64 sunrpc fscache lrw gf128mul glue_helper ablk_helper cryptd serio_raw ppdev parport_pc lp parport btrfs xor raid6_pq libcrc32c psmouse floppy
> [  260.552068] CPU: 0 PID: 1723 Comm: nsenter Not tainted 3.13.0-30-generic #55-Ubuntu
> [  260.552068] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
> [  260.552068] task: ffff8800376097f0 ti: ffff880074824000 task.ti: ffff880074824000
> [  260.552068] RIP: 0010:[<ffffffff811e9483>]  [<ffffffff811e9483>] propagate_umount+0x123/0x130
> [  260.552068] RSP: 0018:ffff880074825e98  EFLAGS: 00010246
> [  260.552068] RAX: ffff88007c741140 RBX: 0000000000000002 RCX: ffff88007c741190
> [  260.552068] RDX: ffff88007c741190 RSI: ffff880074825ec0 RDI: ffff880074825ec0
> [  260.552068] RBP: ffff880074825eb0 R08: 00000000000172e0 R09: ffff88007fc172e0
> [  260.552068] R10: ffffffff811cc642 R11: ffffea0001d59000 R12: ffff88007c741140
> [  260.552068] R13: ffff88007c741140 R14: ffff88007c741140 R15: 0000000000000000
> [  260.552068] FS:  00007fd5c7e41740(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
> [  260.552068] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [  260.552068] CR2: 00007fd5c7968050 CR3: 0000000070124000 CR4: 00000000000406f0
> [  260.552068] Stack:
> [  260.552068]  0000000000000002 0000000000000002 ffff88007c631000 ffff880074825ed8
> [  260.552068]  ffffffff811dcfac ffff88007c741140 0000000000000002 ffff88007c741160
> [  260.552068]  ffff880074825f38 ffffffff811dd12b ffffffff811cc642 0000000075640000
> [  260.552068] Call Trace:
> [  260.552068]  [<ffffffff811dcfac>] umount_tree+0x20c/0x260
> [  260.552068]  [<ffffffff811dd12b>] do_umount+0x12b/0x300
> [  260.552068]  [<ffffffff811cc642>] ? final_putname+0x22/0x50
> [  260.552068]  [<ffffffff811cc849>] ? putname+0x29/0x40
> [  260.552068]  [<ffffffff811dd88c>] SyS_umount+0xdc/0x100
> [  260.552068]  [<ffffffff8172aeff>] tracesys+0xe1/0xe6
> [  260.552068] Code: 89 50 08 48 8b 50 08 48 89 02 49 89 45 08 e9 72 ff ff ff 0f 1f 44 00 00 4c 89 e6 4c 89 e7 e8 f5 f6 ff ff 48 89 c3 e9 39 ff ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 90 66 66 66 66 90 55 b8 01
> [  260.552068] RIP  [<ffffffff811e9483>] propagate_umount+0x123/0x130
> [  260.552068]  RSP <ffff880074825e98>
> [  260.611451] ---[ end trace 11c33d85f1d4c652 ]--

Which in practice is totally uninteresting.  Only the global root user can
do it, and it is just a stupid thing to do.

However that is no excuse to allow a silly way to oops the kernel.

We can avoid this silly problem by setting MNT_LOCKED on the rootfs
mount point and thus avoid needing any special cases in the unmount
code.
Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      e1ce59d2
    • David S. Miller's avatar
      ipv4: Don't do expensive useless work during inetdev destroy. · 5cc4ff31
      David S. Miller authored 
      commit fbd40ea0 upstream.

When an inetdev is destroyed, every address assigned to the interface
is removed.  And in this scenerio we do two pointless things which can
be very expensive if the number of assigned interfaces is large:

1) Address promotion.  We are deleting all addresses, so there is no
   point in doing this.

2) A full nf conntrack table purge for every address.  We only need to
   do this once, as is already caught by the existing
   masq_dev_notifier so masq_inet_event() can skip this.

[mk] 3.12.*: The change in masq_inet_event() needs to be duplicated in
both IPv4 and IPv6 version of the function, these two were merged in
3.18.
Reported-by: default avatarSolar Designer <solar@openwall.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Tested-by: default avatarCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: default avatarMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      5cc4ff31
    • Gabriel Krisman Bertazi's avatar
      ipr: Fix regression when loading firmware · 7514ee10
      Gabriel Krisman Bertazi authored 
      commit 21b81716 upstream.

Commit d63c7dd5 ("ipr: Fix out-of-bounds null overwrite") removed
the end of line handling when storing the update_fw sysfs attribute.
This changed the userpace API because it started refusing writes
terminated by a line feed, which broke the update tools we already have.

This patch re-adds that handling, so both a write terminated by a line
feed or not can make it through with the update.

Fixes: d63c7dd5 ("ipr: Fix out-of-bounds null overwrite")
Signed-off-by: default avatarGabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Insu Yun <wuninsu@gmail.com>
Acked-by: default avatarBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      7514ee10
    • Insu Yun's avatar
      ipr: Fix out-of-bounds null overwrite · def91dea
      Insu Yun authored 
      commit d63c7dd5 upstream.

Return value of snprintf is not bound by size value, 2nd argument.
(https://www.kernel.org/doc/htmldocs/kernel-api/API-snprintf.html).
Return value is number of printed chars, can be larger than 2nd
argument.  Therefore, it can write null byte out of bounds ofbuffer.
Since snprintf puts null, it does not need to put additional null byte.
Signed-off-by: default avatarInsu Yun <wuninsu@gmail.com>
Reviewed-by: default avatarShane Seymour <shane.seymour@hpe.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      def91dea
  5. 16 Mar, 2016 7 commits
    • Jiri Slaby's avatar
      Linux 3.12.57 · d9d35182
      Jiri Slaby authored
      d9d35182
    • Konrad Rzeszutek Wilk's avatar
      xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY · 372e0615
      Konrad Rzeszutek Wilk authored 
      commit 8d47065f upstream.

Commit 408fb0e5 (xen/pciback: Don't
allow MSI-X ops if PCI_COMMAND_MEMORY is not set) prevented enabling
MSI-X on passed-through virtual functions, because it checked the VF
for PCI_COMMAND_MEMORY but this is not a valid bit for VFs.

Instead, check the physical function for PCI_COMMAND_MEMORY.
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Signed-off-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      372e0615
    • Konrad Rzeszutek Wilk's avatar
      xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set. · bb7aa305
      Konrad Rzeszutek Wilk authored 
      commit 408fb0e5 upstream.

commit f598282f ("PCI: Fix the NIU MSI-X problem in a better way")
teaches us that dealing with MSI-X can be troublesome.

Further checks in the MSI-X architecture shows that if the
PCI_COMMAND_MEMORY bit is turned of in the PCI_COMMAND we
may not be able to access the BAR (since they are memory regions).

Since the MSI-X tables are located in there.. that can lead
to us causing PCIe errors. Inhibit us performing any
operation on the MSI-X unless the MEMORY bit is set.

Note that Xen hypervisor with:
"x86/MSI-X: access MSI-X table only after having enabled MSI-X"
will return:
xen_pciback: 0000:0a:00.1: error -6 enabling MSI-X for guest 3!

When the generic MSI code tries to setup the PIRQ without
MEMORY bit set. Which means with later versions of Xen
(4.6) this patch is not neccessary.

This is part of XSA-157
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      bb7aa305
    • Konrad Rzeszutek Wilk's avatar
      xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled. · 388a8005
      Konrad Rzeszutek Wilk authored 
      commit 7cfb905b upstream.

Otherwise just continue on, returning the same values as
previously (return of 0, and op->result has the PIRQ value).

This does not change the behavior of XEN_PCI_OP_disable_msi[|x].

The pci_disable_msi or pci_disable_msix have the checks for
msi_enabled or msix_enabled so they will error out immediately.

However the guest can still call these operations and cause
us to disable the 'ack_intr'. That means the backend IRQ handler
for the legacy interrupt will not respond to interrupts anymore.

This will lead to (if the device is causing an interrupt storm)
for the Linux generic code to disable the interrupt line.

Naturally this will only happen if the device in question
is plugged in on the motherboard on shared level interrupt GSI.

This is part of XSA-157
Reviewed-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      388a8005
    • Konrad Rzeszutek Wilk's avatar
      xen/pciback: Do not install an IRQ handler for MSI interrupts. · 4113b288
      Konrad Rzeszutek Wilk authored 
      commit a396f3a2 upstream.

Otherwise an guest can subvert the generic MSI code to trigger
an BUG_ON condition during MSI interrupt freeing:

 for (i = 0; i < entry->nvec_used; i++)
        BUG_ON(irq_has_action(entry->irq + i));

Xen PCI backed installs an IRQ handler (request_irq) for
the dev->irq whenever the guest writes PCI_COMMAND_MEMORY
(or PCI_COMMAND_IO) to the PCI_COMMAND register. This is
done in case the device has legacy interrupts the GSI line
is shared by the backend devices.

To subvert the backend the guest needs to make the backend
to change the dev->irq from the GSI to the MSI interrupt line,
make the backend allocate an interrupt handler, and then command
the backend to free the MSI interrupt and hit the BUG_ON.

Since the backend only calls 'request_irq' when the guest
writes to the PCI_COMMAND register the guest needs to call
XEN_PCI_OP_enable_msi before any other operation. This will
cause the generic MSI code to setup an MSI entry and
populate dev->irq with the new PIRQ value.

Then the guest can write to PCI_COMMAND PCI_COMMAND_MEMORY
and cause the backend to setup an IRQ handler for dev->irq
(which instead of the GSI value has the MSI pirq). See
'xen_pcibk_control_isr'.

Then the guest disables the MSI: XEN_PCI_OP_disable_msi
which ends up triggering the BUG_ON condition in 'free_msi_irqs'
as there is an IRQ handler for the entry->irq (dev->irq).

Note that this cannot be done using MSI-X as the generic
code does not over-write dev->irq with the MSI-X PIRQ values.

The patch inhibits setting up the IRQ handler if MSI or
MSI-X (for symmetry reasons) code had been called successfully.

P.S.
Xen PCIBack when it sets up the device for the guest consumption
ends up writting 0 to the PCI_COMMAND (see xen_pcibk_reset_device).
XSA-120 addendum patch removed that - however when upstreaming said
addendum we found that it caused issues with qemu upstream. That
has now been fixed in qemu upstream.

This is part of XSA-157
Reviewed-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      4113b288
    • Konrad Rzeszutek Wilk's avatar
      xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled · d8e0a80d
      Konrad Rzeszutek Wilk authored 
      commit 5e0ce145 upstream.

The guest sequence of:

  a) XEN_PCI_OP_enable_msix
  b) XEN_PCI_OP_enable_msix

results in hitting an NULL pointer due to using freed pointers.

The device passed in the guest MUST have MSI-X capability.

The a) constructs and SysFS representation of MSI and MSI groups.
The b) adds a second set of them but adding in to SysFS fails (duplicate entry).
'populate_msi_sysfs' frees the newly allocated msi_irq_groups (note that
in a) pdev->msi_irq_groups is still set) and also free's ALL of the
MSI-X entries of the device (the ones allocated in step a) and b)).

The unwind code: 'free_msi_irqs' deletes all the entries and tries to
delete the pdev->msi_irq_groups (which hasn't been set to NULL).
However the pointers in the SysFS are already freed and we hit an
NULL pointer further on when 'strlen' is attempted on a freed pointer.

The patch adds a simple check in the XEN_PCI_OP_enable_msix to guard
against that. The check for msi_enabled is not stricly neccessary.

This is part of XSA-157
Reviewed-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      d8e0a80d
    • Konrad Rzeszutek Wilk's avatar
      xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled · 0842f7d8
      Konrad Rzeszutek Wilk authored 
      commit 56441f3c upstream.

The guest sequence of:

 a) XEN_PCI_OP_enable_msi
 b) XEN_PCI_OP_enable_msi
 c) XEN_PCI_OP_disable_msi

results in hitting an BUG_ON condition in the msi.c code.

The MSI code uses an dev->msi_list to which it adds MSI entries.
Under the above conditions an BUG_ON() can be hit. The device
passed in the guest MUST have MSI capability.

The a) adds the entry to the dev->msi_list and sets msi_enabled.
The b) adds a second entry but adding in to SysFS fails (duplicate entry)
and deletes all of the entries from msi_list and returns (with msi_enabled
is still set).  c) pci_disable_msi passes the msi_enabled checks and hits:

BUG_ON(list_empty(dev_to_msi_list(&dev->dev)));

and blows up.

The patch adds a simple check in the XEN_PCI_OP_enable_msi to guard
against that. The check for msix_enabled is not stricly neccessary.

This is part of XSA-157.
Reviewed-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      0842f7d8
  7. 14 Mar, 2016 11 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7