* pci/host-rockchip:
  PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init()
  PCI: rockchip: Split out rockchip_cfg_atu()
  PCI: rockchip: Clean up bit definitions for PCIE_RC_CONFIG_LCS
  PCI: rockchip: Correct the use of FTS mask
  PCI: rockchip: Remove the pointer to L1 substate cap
  PCI: rockchip: Specify the link capability
  PCI: rockchip: Fix negotiated lanes calculation
  PCI: rockchip: Add Kconfig COMPILE_TEST
  PCI: rockchip: Mark RC as common clock architecture
  PCI: rockchip: Provide captured slot power limit and scale
  PCI: rockchip: Add three new resets as required properties
  PCI: Don't attempt to claim shadow copies of ROM
  PCI: designware: Check for iATU unroll support after initializing host
  PCI: qcom: Fix pp->dev usage before assignment
  PCI: designware-plat: Update author email address
  PCI: layerscape: Fix drvdata usage before assignment
  PCI: designware-plat: Change maintainer to Jose Abreu

* pci/host-rcar:
  PCI: rcar: Add gen3 fallback compatibility string for pcie-rcar
  PCI: rcar: Use gen2 fallback compatibility last
  PCI: rcar-gen2: Use gen2 fallback compatibility last

* pci/host-qcom:
  PCI: qcom: Add support for MSM8996 PCIe controller

* pci/host-layerscape:
  PCI: layerscape: Add LS1046a support
  PCI: layerscape: Remove redundant error message from ls_pcie_probe()

* pci/host-iproc:
  PCI: iproc: Skip check for legacy IRQ on PAXC buses
  PCI: iproc: Fix incorrect MSI address alignment
  PCI: iproc: Add support for the next-gen PAXB controller
  PCI: iproc: Add PAXBv2 binding info
  PCI: iproc: Add inbound DMA mapping support
  PCI: iproc: Add optional dma-ranges
  PCI: iproc: Make outbound mapping code more generic
  PCI: iproc: Remove redundant outbound properties
  PCI: iproc: Add PAXC v2 support
  PCI: iproc: Add PAXCv2 related binding
  PCI: iproc: Fix exception with multi-function devices
  PCI: iproc: Add BCMA type
  PCI: iproc: Do not reset PAXC when initializing the driver
  PCI: iproc: Improve core register population

* pci/host-imx6:
  MAINTAINERS: Add devicetree binding to PCI i.MX6 entry
  MAINTAINERS: Update Richard Zhu's email address

* pci/host-hv:
  PCI: hv: Allocate physically contiguous hypercall params buffer
  PCI: hv: Delete the device earlier from hbus->children for hot-remove
  PCI: hv: Fix hv_pci_remove() for hot-remove
  PCI: hv: Use the correct buffer size in new_pcichild_device()
  PCI: hv: Make unnecessarily global IRQ masking functions static

* pci/host-hisi:
  PCI: hisi: Remove redundant error message from hisi_pcie_probe()

* pci/host-altera:
  PCI: altera: Remove redundant error message in altera_pcie_parse_dt()
  PCI: altera: Use builtin_platform_driver() to simplify the code

* pci/host:
  of/pci: Add of_pci_get_max_link_speed() to parse max-link-speed from DT
  Documentation/devicetree: Add PCIe max-link-speed property

* pci/virtualization:
  PCI: Add comments about ROM BAR updating
  PCI: Decouple IORESOURCE_ROM_ENABLE and PCI_ROM_ADDRESS_ENABLE
  PCI: Remove pci_resource_bar() and pci_iov_resource_bar()
  PCI: Don't update VF BARs while VF memory space is enabled
  PCI: Separate VF BAR updates from standard BAR updates
  PCI: Update BARs using property bits appropriate for type
  PCI: Ignore BAR updates on virtual functions
  PCI: Do any VF BAR updates before enabling the BARs
  PCI: Support INTx masking on ConnectX-4 with firmware x.14.1100+
  PCI: Convert Mellanox broken INTx quirks to be for listed devices only
  PCI: Convert broken INTx masking quirks from HEADER to FINAL
  net/mlx4_core: Use device ID defines
  PCI: Add Mellanox device IDs

* pci/pm:
  x86/platform/intel-mid: Constify mid_pci_platform_pm
  PCI: pciehp: Add runtime PM support for PCIe hotplug ports
  ACPI / hotplug / PCI: Make device_is_managed_by_native_pciehp() public
  ACPI / hotplug / PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit
  PCI: Unfold conditions to block runtime PM on PCIe ports
  PCI: Consolidate conditions to allow runtime PM on PCIe ports
  PCI: Activate runtime PM on a PCIe port only if it can suspend
  PCI: Speed up algorithm in pci_bridge_d3_update()
  PCI: Autosense device removal in pci_bridge_d3_update()
  PCI: Don't acquire ref on parent in pci_bridge_d3_update()
  USB: UHCI: report non-PME wakeup signalling for Intel hardware
  PCI: Check for PME in targeted sleep state

* pci/msi:
  PCI/MSI: Check for NULL affinity mask in pci_irq_get_affinity()

* pci/misc:
  PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)
  PCI: Expand "VPD access disabled" quirk message
  PCI: pciehp: Remove loading message
  PCI: hotplug: Remove hotplug core message
  PCI: Remove service driver load/unload messages
  PCI/AER: Log AER IRQ when claiming Root Port
  PCI/AER: Log errors with PCI device, not PCIe service device
  PCI/AER: Remove unused version macros
  PCI/PME: Log PME IRQ when claiming Root Port
  PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors
  PCI: Move config space size macros to pci_regs.h

* pci/hotplug:
  PCI: pciehp: Leave power indicator on when enabling already-enabled slot
  PCI: pciehp: Prioritize data-link event over presence detect
  PCI: cpqphp: Add missing call to pci_disable_device()

* pci/enumeration:
  PCI: Warn on possible RW1C corruption for sub-32 bit config writes
  PCI: Create revision file in sysfs

* pci/ecam:
  PCI: Explain ARM64 ACPI/MCFG quirk Kconfig and build strategy
  PCI: Add MCFG quirks for X-Gene host controller
  PCI: Add MCFG quirks for Cavium ThunderX pass1.x host controller
  PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller
  PCI: thunder-pem: Factor out resource lookup
  PCI: Add MCFG quirks for HiSilicon Hip05/06/07 host controllers
  PCI: Add MCFG quirks for Qualcomm QDF2432 host controller
  PCI/ACPI: Provide acpi_get_rc_resources() for ARM64 platform
  PCI/ACPI: Check for platform-specific MCFG quirks
  PCI/ACPI: Extend pci_mcfg_lookup() to return ECAM config accessors
  arm64: PCI: Exclude ACPI "consumer" resources from host bridge windows
  arm64: PCI: Manage controller-specific data on per-controller basis
  arm64: PCI: Search ACPI namespace to ensure ECAM space is reserved
  arm64: PCI: Add local struct device pointers
  ACPI: Add acpi_resource_consumer() to find device that claims a resource

* pci/aspm:
  PCI/ASPM: Don't retrain link if ASPM not possible
  PCI/ASPM: Use permission-specific DEVICE_ATTR variants

There is at least one Chelsio 10Gb card which uses VPD area to store some
non-standard blocks (example below).  However pci_vpd_size() returns the
length of the first block only assuming that there can be only one VPD "End
Tag".

Since 4e1a6355 ("vfio/pci: Use kernel VPD access functions"), VFIO
blocks access beyond that offset, which prevents the guest "cxgb3" driver
from probing the device.  The host system does not have this problem as its
driver accesses the config space directly without pci_read_vpd().

Add a quirk to override the VPD size to a bigger value.  The maximum size
is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h.
We do not read the tag as the cxgb3 driver does as the driver supports
writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes
boundary.  The quirk is registered for all devices supported by the cxgb3
driver.

This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3
driver itself accesses VPD directly and the problem only exists with the
vfio-pci driver (when cxgb3 is not running on the host and may not be even
loaded) which blocks accesses beyond the first block of VPD data.  However
vfio-pci itself does not have quirks mechanism so we add it to PCI.

This is the controller:
Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030]

This is what I parsed from its VPD:
===
b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K'
 0000 Large item 42 bytes; name 0x2 Identifier String
	b'10 Gigabit Ethernet-SR PCI Express Adapter'
 002d Large item 74 bytes; name 0x10
	#00 [EC] len=7: b'D76809 '
	#0a [FN] len=7: b'46K7897'
	#14 [PN] len=7: b'46K7897'
	#1e [MN] len=4: b'1037'
	#25 [FC] len=4: b'5769'
	#2c [SN] len=12: b'YL102035603V'
	#3b [NA] len=12: b'00145E992ED1'
 007a Small item 1 bytes; name 0xf End Tag

 0c00 Large item 16 bytes; name 0x2 Identifier String
	b'S310E-SR-X      '
 0c13 Large item 234 bytes; name 0x10
	#00 [PN] len=16: b'TBD             '
	#13 [EC] len=16: b'110107730D2     '
	#26 [SN] len=16: b'97YL102035603V  '
	#39 [NA] len=12: b'00145E992ED1'
	#48 [V0] len=6: b'175000'
	#51 [V1] len=6: b'266666'
	#5a [V2] len=6: b'266666'
	#63 [V3] len=6: b'2000  '
	#6c [V4] len=2: b'1 '
	#71 [V5] len=6: b'c2    '
	#7a [V6] len=6: b'0     '
	#83 [V7] len=2: b'1 '
	#88 [V8] len=2: b'0 '
	#8d [V9] len=2: b'0 '
	#92 [VA] len=2: b'0 '
	#97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'...
 0d00 Large item 252 bytes; name 0x11
	#00 [VC] len=16: b'122310_1222 dp  '
	#13 [VD] len=16: b'610-0001-00 H1\x00\x00'
	#26 [VE] len=16: b'122310_1353 fp  '
	#39 [VF] len=16: b'610-0001-00 H1\x00\x00'
	#4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'...
 0dff Small item 0 bytes; name 0xf End Tag

10f3 Large item 13315 bytes; name 0x62
!!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00'
===
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

It's not very enlightening to see

  pci 0000:07:00.0: [Firmware Bug]: VPD access disabled

in the dmesg log because there's no clue about what the firmware bug is.
Expand the message to explain why we're disabling VPD.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Remove the "PCI Express Hot Plug Controller Driver" version message.  I
don't think it contains any useful information.  Remove unused #defines
and move the author information to a comment.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Remove the "PCI Hot Plug PCI Core" version message.  I don't think it
contains any useful information.  Remove unused #defines and move the
author information to a comment.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Remove the "service driver %s loaded" and unloaded messages.  All service
drivers already log something in their probe functions, where they can log
more useful details.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add a log message when we enable AER on a Root Port and the hierarchy below
it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

All other AER-related log messages use the PCI device, e.g.,
"pci 0000:00:1c.0", not the PCIe service device, e.g.,
"aer 0000:00:1c.0:pcie02".

Change the probe error messages to match the rest and include a little
context.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Remove the unused DRIVER_VERSION, DRIVER_AUTHOR, and DRIVER_DESC macros.
The author information is already included in a comment above.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

We already log a "Signaling PME" whenever the PME service driver claims a
Root Port.  In fact, we also log the same message for every device in the
hierarchy below the Root Port.

Log the "Signaling PME" once (only for the Root Port, since we can
trivially find out which devices are below the Root Port), and include the
IRQ number in the message to help connect the dots with /proc/interrupts.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Since we register pcie_pme_driver only for PCI_EXP_TYPE_ROOT_PORT, the PME
driver never claims Root Complex Event Collectors.

Remove unused code related to Root Complex Event Collectors.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Move PCI configuration space size macros (PCI_CFG_SPACE_SIZE and
PCI_CFG_SPACE_EXP_SIZE) from drivers/pci/pci.h to
include/uapi/linux/pci_regs.h so they can be used by more drivers and
eliminate duplicate definitions.

[bhelgaas: Expand comment to include PCI-X details]
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This struct never needs to be modified.  The size of pci-mid.o ELF
sections changes thusly:

  -.data          56
  +.data           0
  -.rodata        32
  +.rodata        88
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Some (defective) PCIe devices are not able to reliably do link retraining.

Check to see if ASPM is possible between link partners before configuring
common clocking, and doing the resulting link retraining.  If ASPM is not
possible, there is no reason to risk losing access to a device due to an
unnecessary link retraining.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

PAXC and PAXCv2 buses do not support legacy IRQs so there is no reason to
even try and map them.  Without a change like this, one cannot create VFs
on Nitro ports since legacy interrupts are checked as part of the PCI
device creation process.  Testing on PAXC hardware showed that VFs are
properly created with only the change to not set pcie->map_irq, but just to
be safe the change in iproc_pcie_setup() will ensure that pdev_fixup_irq()
will not panic.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>

If an error occurs when enabling a slot, pciehp_power_thread() turns off
the power indicator.  But if the only error is that the slot was already
enabled, we should leave the power indicator on.

Return success if called to enable an already-enabled slot.
This is in the same spirit of the special handling for EEXISTS when
pciehp_configure_device() determines the slot devices already exist.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>

If Slot Status indicates changes in both Data Link Layer Status and
Presence Detect, prioritize the Link status change.

When both events are observed, pciehp currently relies on the Slot Status
Presence Detect State (PDS) to agree with the Link Status Data Link Layer
Active status.  The Presence Detect State, however, may be set to 1 through
out-of-band presence detect even if the link is down, which creates
conflicting events.

Since the Link Status accurately reflects the reachability of the
downstream bus, the Link Status event should take precedence over a
Presence Detect event.  Skip checking the PDC status if we handled a link
event in the same handler.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>

Add fallback compatibility string for the  R-Car Gen 3 family.  This is in
keeping with the both the existing fallback compatibility string for the
R-Car Gen 2 family and the fallback scheme being adopted wherever
appropriate for drivers for Renesas SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Improve readability by listing fallback compatibility strings after the
more-specific compatibility strings they provide a fallback for.

This does not affect run-time behaviour as it is the order in the DTB that
determines which compatibility string is used.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Improve readability by listing fallback compatibility strings after the
more-specific compatibility strings they provide a fallback for.

This does not affect run-time behaviour as it is the order in the DTB that
determines which compatibility string is used.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Move deassert of pm/aclk/pclk after phy_init() as we want to optimize the
logic of reset control and reuse rockchip_pcie_init_port() later which
should fully follow the cold boot procedure of ROM code.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>

Split out a new function, rockchip_cfg_atu(), in order to re-configure the
ATU when missing these information after wakeup from S3.

[bhelgaas: add "dev" temporary, return 0 when known]
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>

PCIE_RC_CONFIG_LCS contains control and status bits specific to the PCIe
link.  The layout for this register looks the same as the existing
PCI_EXP_LNKCTL and PCI_EXP_LNKSTA.  So let's reuse them.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>