touch_input is stored in wacom_shared for pen data to report touch
switch status. It is possible, although we didn't see it happen on
Linux yet, that pen data is procesed before touch interface is
fully probed.

As a by-product of this patch, it fixes the FreeBSD issue reported
by Denis Akiyakov http://www.spinics.net/lists/linux-input/msg33971.htmlReviewed-by: Hans Petter Selasky <hps@selasky.org>
Tested-by: Denis Akiyakov <d.akiyakov@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID fixes from Jiri Kosina:
 - workarounds for a couple of misbehaving Elan Touchscreens, by Adel
   Gadllah
 - fix for TransducerSerialNumber field implementation, by Jason Gerecke
 - a couple of new HID usages (added by HUT), by Olivier Gay

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: input: Fix TransducerSerialNumber implementation
  HID: add keyboard input assist hid usages
  HID: usbhid: enable always-poll quirk for Elan Touchscreen 016f
  HID: usbhid: enable always-poll quirk for Elan Touchscreen 009b

Pull Integrity subsystem fix from James Morris:
 "These changes fix a bug in xattr handling, where the evm and ima
  inode_setxattr() functions do not check for empty xattrs being passed
  from userspace (leading to user-triggerable null pointer
  dereferences)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  evm: check xattr value length and type in evm_inode_setxattr()
  ima: check xattr value length and type in the ima_inode_setxattr()

Pull powerpc updates from Michael Ellerman:
 "There's some bug fixes or cleanups to facilitate fixes, a MAINTAINERS
  update, and a new syscall (bpf)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
  powerpc/numa: ensure per-cpu NUMA mappings are correct on topology update
  powerpc/numa: use cached value of update->cpu in update_cpu_topology
  cxl: Fix PSL error due to duplicate segment table entries
  powerpc/mm: Use appropriate ESID mask in copro_calculate_slb()
  cxl: Refactor cxl_load_segment() and find_free_sste()
  cxl: Disable secondary hash in segment table
  Revert "powerpc/powernv: Fix endian bug in LPC bus debugfs accessors"
  powernv: Use _GLOBAL_TOC for opal wrappers
  powerpc: Wire up sys_bpf() syscall
  MAINTAINERS: nx-842 driver maintainer change
  powerpc/mm: Remove redundant #if case
  powerpc/mm: Fix build error with hugetlfs disabled

The commit which introduced TransducerSerialNumber (368c9664) is missing
two crucial implementation details. Firstly, the commit does not set the
type/code/bit/max fields as expected later down the code which can cause
the driver to crash when a tablet with this usage is connected. Secondly,
the call to 'set_bit' causes MSC_PULSELED to be sent instead of the
expected MSC_SERIAL. This commit addreses both issues.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus

We received a report of warning in kernel/sched/core.c where the sched
group was NULL on an LPAR after a topology update. This seems to occur
because after the topology update has moved the CPUs, cpu_to_node is
returning the old value still, which ends up breaking the consistency of
the NUMA topology in the per-cpu maps. Ensure that we update the per-cpu
fields when we re-map CPUs.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

There isn't any need to keep referring to update->cpu, as we've already
checked cpu == update->cpu at this point.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull two nfsd fixes from Bruce Fields:
 "One regression from the 3.16 xdr rewrite, one an older bug exposed by
  a separate bug in the client's new SEEK code"

* 'for-3.18' of git://linux-nfs.org/~bfields/linux:
  nfsd4: fix crash on unknown operation number
  nfsd4: fix response size estimation for OP_SEQUENCE

Merge tag 'trace-fixes-v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace trampoline accounting fixes from Steven Rostedt:
 "Adding the new code for 3.19, I discovered a couple of minor bugs with
  the accounting of the ftrace_ops trampoline logic.

  One was that the old hash was not updated before calling the modify
  code for an ftrace_ops.  The second bug was what let the first bug go
  unnoticed, as the update would check the current hash for all
  ftrace_ops (where it should only check the old hash for modified
  ones).  This let things work when only one ftrace_ops was registered
  to a function, but could break if more than one was registered
  depending on the order of the look ups.

  The worse thing that can happen if this bug triggers is that the
  ftrace self checks would find an anomaly and shut itself down"

* tag 'trace-fixes-v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix checking of trampoline ftrace_ops in finding trampoline
  ftrace: Set ops->old_hash on modifying what an ops hooks to

Pull ARM fixes from Russell King:
 "A couple of ARM fixes.

  We fix some printk formats for ptrdiff_t quantities which cause GCC
  4.9 to complain, and we also blacklist known buggy GCC 4.8.x compilers
  as their miscompilation is serious enough to cause filesystem
  corruption, even through many distros have fixed their versions"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: fix some printk formats
  ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854

When unmapping a range of pages in zap_pte_range, the page being
unmapped is added to an mmu_gather_batch structure for asynchronous
freeing. If we run out of space in the batch structure before the range
has been completely unmapped, then we break out of the loop, force a
TLB flush and free the pages that we have batched so far. If there are
further pages to unmap, then we resume the loop where we left off.

Unfortunately, we forget to update addr when we break out of the loop,
which causes us to truncate the range being invalidated as the end
address is exclusive. When we re-enter the loop at the same address, the
page has already been freed and the pte_present test will fail, meaning
that we do not reconsider the address for invalidation.

This patch fixes the problem by incrementing addr by the PAGE_SIZE
before breaking out of the loop on batch failure.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

evm_inode_setxattr() can be called with no value. The function does not
check the length so that following command can be used to produce the
kernel oops: setfattr -n security.evm FOO. This patch fixes it.

Changes in v3:
* there is no reason to return different error codes for EVM_XATTR_HMAC
  and non EVM_XATTR_HMAC. Remove unnecessary test then.

Changes in v2:
* testing for validity of xattr type

[ 1106.396921] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 1106.398192] IP: [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48
[ 1106.399244] PGD 29048067 PUD 290d7067 PMD 0
[ 1106.399953] Oops: 0000 [#1] SMP
[ 1106.400020] Modules linked in: bridge stp llc evdev serio_raw i2c_piix4 button fuse
[ 1106.400020] CPU: 0 PID: 3635 Comm: setxattr Not tainted 3.16.0-kds+ #2936
[ 1106.400020] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 1106.400020] task: ffff8800291a0000 ti: ffff88002917c000 task.ti: ffff88002917c000
[ 1106.400020] RIP: 0010:[<ffffffff812af7b8>]  [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48
[ 1106.400020] RSP: 0018:ffff88002917fd50  EFLAGS: 00010246
[ 1106.400020] RAX: 0000000000000000 RBX: ffff88002917fdf8 RCX: 0000000000000000
[ 1106.400020] RDX: 0000000000000000 RSI: ffffffff818136d3 RDI: ffff88002917fdf8
[ 1106.400020] RBP: ffff88002917fd68 R08: 0000000000000000 R09: 00000000003ec1df
[ 1106.400020] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800438a0a00
[ 1106.400020] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 1106.400020] FS:  00007f7dfa7d7740(0000) GS:ffff88005da00000(0000) knlGS:0000000000000000
[ 1106.400020] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1106.400020] CR2: 0000000000000000 CR3: 000000003763e000 CR4: 00000000000006f0
[ 1106.400020] Stack:
[ 1106.400020]  ffff8800438a0a00 ffff88002917fdf8 0000000000000000 ffff88002917fd98
[ 1106.400020]  ffffffff812a1030 ffff8800438a0a00 ffff88002917fdf8 0000000000000000
[ 1106.400020]  0000000000000000 ffff88002917fde0 ffffffff8116d08a ffff88002917fdc8
[ 1106.400020] Call Trace:
[ 1106.400020]  [<ffffffff812a1030>] security_inode_setxattr+0x5d/0x6a
[ 1106.400020]  [<ffffffff8116d08a>] vfs_setxattr+0x6b/0x9f
[ 1106.400020]  [<ffffffff8116d1e0>] setxattr+0x122/0x16c
[ 1106.400020]  [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45
[ 1106.400020]  [<ffffffff8114d011>] ? __sb_start_write+0x10f/0x143
[ 1106.400020]  [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45
[ 1106.400020]  [<ffffffff811687c0>] ? __mnt_want_write+0x48/0x4f
[ 1106.400020]  [<ffffffff8116d3e6>] SyS_setxattr+0x6e/0xb0
[ 1106.400020]  [<ffffffff81529da9>] system_call_fastpath+0x16/0x1b
[ 1106.400020] Code: c3 0f 1f 44 00 00 55 48 89 e5 41 55 49 89 d5 41 54 49 89 fc 53 48 89 f3 48 c7 c6 d3 36 81 81 48 89 df e8 18 22 04 00 85 c0 75 07 <41> 80 7d 00 02 74 0d 48 89 de 4c 89 e7 e8 5a fe ff ff eb 03 83
[ 1106.400020] RIP  [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48
[ 1106.400020]  RSP <ffff88002917fd50>
[ 1106.400020] CR2: 0000000000000000
[ 1106.428061] ---[ end trace ae08331628ba3050 ]---
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

ima_inode_setxattr() can be called with no value. Function does not
check the length so that following command can be used to produce
kernel oops: setfattr -n security.ima FOO. This patch fixes it.

Changes in v3:
* for stable reverted "allow setting hash only in fix or log mode"
  It will be a separate patch.

Changes in v2:
* testing validity of xattr type
* allow setting hash only in fix or log mode (Mimi)

[  261.562522] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  261.564109] IP: [<ffffffff812af272>] ima_inode_setxattr+0x3e/0x5a
[  261.564109] PGD 3112f067 PUD 42965067 PMD 0
[  261.564109] Oops: 0000 [#1] SMP
[  261.564109] Modules linked in: bridge stp llc evdev serio_raw i2c_piix4 button fuse
[  261.564109] CPU: 0 PID: 3299 Comm: setxattr Not tainted 3.16.0-kds+ #2924
[  261.564109] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  261.564109] task: ffff8800428c2430 ti: ffff880042be0000 task.ti: ffff880042be0000
[  261.564109] RIP: 0010:[<ffffffff812af272>]  [<ffffffff812af272>] ima_inode_setxattr+0x3e/0x5a
[  261.564109] RSP: 0018:ffff880042be3d50  EFLAGS: 00010246
[  261.564109] RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000015
[  261.564109] RDX: 0000001500000000 RSI: 0000000000000000 RDI: ffff8800375cc600
[  261.564109] RBP: ffff880042be3d68 R08: 0000000000000000 R09: 00000000004d6256
[  261.564109] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88002149ba00
[  261.564109] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[  261.564109] FS:  00007f6c1e219740(0000) GS:ffff88005da00000(0000) knlGS:0000000000000000
[  261.564109] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  261.564109] CR2: 0000000000000000 CR3: 000000003b35a000 CR4: 00000000000006f0
[  261.564109] Stack:
[  261.564109]  ffff88002149ba00 ffff880042be3df8 0000000000000000 ffff880042be3d98
[  261.564109]  ffffffff812a101b ffff88002149ba00 ffff880042be3df8 0000000000000000
[  261.564109]  0000000000000000 ffff880042be3de0 ffffffff8116d08a ffff880042be3dc8
[  261.564109] Call Trace:
[  261.564109]  [<ffffffff812a101b>] security_inode_setxattr+0x48/0x6a
[  261.564109]  [<ffffffff8116d08a>] vfs_setxattr+0x6b/0x9f
[  261.564109]  [<ffffffff8116d1e0>] setxattr+0x122/0x16c
[  261.564109]  [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45
[  261.564109]  [<ffffffff8114d011>] ? __sb_start_write+0x10f/0x143
[  261.564109]  [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45
[  261.564109]  [<ffffffff811687c0>] ? __mnt_want_write+0x48/0x4f
[  261.564109]  [<ffffffff8116d3e6>] SyS_setxattr+0x6e/0xb0
[  261.564109]  [<ffffffff81529da9>] system_call_fastpath+0x16/0x1b
[  261.564109] Code: 48 89 f7 48 c7 c6 58 36 81 81 53 31 db e8 73 27 04 00 85 c0 75 28 bf 15 00 00 00 e8 8a a5 d9 ff 84 c0 75 05 83 cb ff eb 15 31 f6 <41> 80 7d 00 03 49 8b 7c 24 68 40 0f 94 c6 e8 e1 f9 ff ff 89 d8
[  261.564109] RIP  [<ffffffff812af272>] ima_inode_setxattr+0x3e/0x5a
[  261.564109]  RSP <ffff880042be3d50>
[  261.564109] CR2: 0000000000000000
[  261.599998] ---[ end trace 39a89a3fc267e652 ]---
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

In certain circumstances the PSL (Power Service Layer, which provides
translation services for CXL hardware) can send an interrupt for a
segment miss that the kernel has already handled. This can happen if
multiple translations for the same segment are queued in the PSL before
the kernel has restarted the first translation.

The CXL driver does not expect this situation and does not check if a
segment had already been handled. This could cause a duplicate segment
table entry which in turn caused a PSL error taking down the card.

This patch fixes the issue by checking for existing entries in the
segment table that match the segment we are trying to insert, so as to
avoid inserting duplicate entries.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch makes copro_calculate_slb() mask the ESID by the correct mask
for 1T vs 256M segments.

This has no effect by itself as the extra bits were ignored, but it
makes debugging the segment table entries easier and means that we can
directly compare the ESID values for duplicates without needing to worry
about masking in the comparison.

This will be used to simplify a comparison in the following patch.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This moves the segment table hash calculation from cxl_load_segment()
into find_free_sste() since that is the only place it is actually used.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch simplifies the process of finding a free segment table entry
by disabling the secondary hash. This reduces the number of possible
entries in the segment table for a given address from 16 to 8.

Due to the large segment sizes we use it is extremely unlikely that the
secondary hash would ever have been used in practice, so this should not
have any negative impacts and may even improve performance due to the
reduced number of comparisons that software & hardware need to perform.

This patch clears the SC bit in the hardware's state register
(CXL_PSL_SR_An) to disable the secondary hash in the hardware since we
can no longer fill out entries using it.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This reverts commit bf7588a0.

Ben says although the code is not correct "[this] fix was completely
wrong and does more damages than it fixes things."
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull media fixes from Mauro Carvalho Chehab:
 "A series of driver fixes:
   - a few compilation fixes with randconfigs
   - one potential compilation breakage on userspace due to the usage of
     a gcc extension
   - several warnings fixed
   - some other random driver fixes"

* tag 'media/v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (22 commits)
  [media] s5p-jpeg: Avoid -Wuninitialized warning in s5p_jpeg_parse_hdr
  [media] s5p-fimc: Only build suspend/resume for PM
  [media] s5p-jpeg: Only build suspend/resume for PM
  [media] Remove references to non-existent PLAT_S5P symbol
  [media] videobuf-dma-contig: set vm_pgoff to be zero to pass the sanity check in vm_iomap_memory()
  [media] tw68: remove bogus I2C_ALGOBIT dependency
  [media] usbvision-video: two use after frees
  [media] tw68: remove deprecated IRQF_DISABLED
  [media] xc5000: use after free in release()
  [media] em28xx-input: NULL dereference on error
  [media] wl128x: fix fmdbg compiler warning
  Revert "[media] v4l2-dv-timings: fix a sparse warning"
  [media] hackrf: harmless off by one in debug code
  [media] cx23885: initialize config structs for T9580
  [media] v4l: uvcvideo: Fix buffer completion size check
  [media] vivid: fix buffer overrun
  [media] saa7146: Create a device name before it's used
  [media] em28xx: fix uninitialized variable warning
  [media] vivid: fix Kconfig FB dependency
  [media] anysee: make sure loading modules is const
  ...

Pull EDAC fixes from Borislav Petkov:
 "Correct severity of reported errors in several EDAC drivers.  From
  Jason Baron"

* tag 'edac_fixes_for_3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  e7xxx_edac: Report CE events properly
  cpc925_edac: Report UE events properly
  i82860_edac: Report CE events properly
  i3200_edac: Report CE events properly

Pull spi fixes from Mark Brown:
 "Quite a few driver fixes in here, including some fairly substantial
  ones for the recently added Rockchip driver, plus a fix for spidev to
  more reliably support bidirectional transfers which is fairly large
  but basically mechanical.

  It's a bit more code than I'd like but all fixes"

* tag 'spi-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: orion: fix potential NULL pointer de-reference
  spi/rockchip: spi controller must be disabled in tx callback too
  spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode
  spi/rockchip: fix bug that case spi can't go as fast as slave request
  spi: pl022: Fix incorrect dma_unmap_sg
  spi: spidev: Use separate TX and RX bounce buffers
  spi: dw: Initialize of_node to discover DT node children

Pull regulator fixes from Mark Brown:
 "A couple of fixes for v3.18, one fix for an incorrect voltage to
  register mapping in the rk808 driver and a fix for a build failure in
  some SH defconfigs"

* tag 'regulator-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Include err.h from consumer.h to fix build failure
  regulator: rk808: Fix min_uV for DCDC1 & DCDC2

Merge remote-tracking branches 'spi/fix/dw', 'spi/fix/orion', 'spi/fix/pl022', 'spi/fix/rockchip' and 'spi/fix/spidev' into spi-linus

Pull ARM SoC fixes from Olof Johansson:
 "Another week, another small batch of fixes.

  Most of these make zynq, socfpga and sunxi platforms work a bit
  better:

   - due to new requirements for regulators, DWMMC on socfpga broke past
     v3.17
   - SMP spinup fix for socfpga
   - a few DT fixes for zynq
   - another option (FIXED_REGULATOR) for sunxi is needed that used to
     be selected by other options but no longer is.
   - a couple of small DT fixes for at91
   - ...and a couple for i.MX"

* tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: imx28-evk: Let i2c0 run at 100kHz
  ARM: i.MX6: Fix "emi" clock name typo
  ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP
  ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE
  ARM: dts: socfpga: Add a 3.3V fixed regulator node
  ARM: dts: socfpga: Fix SD card detect
  ARM: dts: socfpga: rename gpio nodes
  ARM: at91/dt: sam9263: fix PLLB frequencies
  power: reset: at91-reset: fix power down register
  MAINTAINERS: add atmel ssc driver maintainer entry
  arm: socfpga: fix fetching cpu1start_addr for SMP
  ARM: zynq: DT: trivial: Fix mc node
  ARM: zynq: DT: Add cadence watchdog node
  ARM: zynq: DT: Add missing reference for memory-controller
  ARM: zynq: DT: Add missing reference for ADC
  ARM: zynq: DT: Add missing address for L2 pl310
  ARM: zynq: DT: Remove 222 MHz OPP
  ARM: zynq: DT: Fix GEM register area size

Pull vfs updates from Al Viro:
 "overlayfs merge + leak fix for d_splice_alias() failure exits"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  overlayfs: embed middle into overlay_readdir_data
  overlayfs: embed root into overlay_readdir_data
  overlayfs: make ovl_cache_entry->name an array instead of pointer
  overlayfs: don't hold ->i_mutex over opening the real directory
  fix inode leaks on d_splice_alias() failure exits
  fs: limit filesystem stacking depth
  overlay: overlay filesystem documentation
  overlayfs: implement show_options
  overlayfs: add statfs support
  overlay filesystem
  shmem: support RENAME_WHITEOUT
  ext4: support RENAME_WHITEOUT
  vfs: add RENAME_WHITEOUT
  vfs: add whiteout support
  vfs: export check_sticky()
  vfs: introduce clone_private_mount()
  vfs: export __inode_permission() to modules
  vfs: export do_splice_direct() to modules
  vfs: add i_op->dentry_open()

Merge tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

Merge "ARM: imx: fixes for 3.18" from Shawn Guo:

The i.MX fixes for 3.18:
 - Revert one patch which increases I2C bus frequency on imx28-evk
 - Fix a typo on imx6q EIM clock name

* tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx28-evk: Let i2c0 run at 100kHz
  ARM: i.MX6: Fix "emi" clock name typo
Signed-off-by: Olof Johansson <olof@lixom.net>

Commit 78b81f46 ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues
when doing the following sequence in loop:

- Boot the kernel
- Perform audio playback
- Reboot the system via 'reboot' command

In many times the audio card cannot be probed, which causes playback to fail.

After restoring to the original i2c0 frequency of 100kHz there is no such
problem anymore.

This reverts commit 78b81f46.

Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Fix a typo error, the "emi" names refer to the eim clocks.

The change fixes typo in EIM and EIM_SLOW pre-output dividers and
selectors clock names. Notably EIM_SLOW clock itself is named correctly.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
[vladimir_zapolskiy@mentor.com: ported to v3.17]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

same story...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

no sense having it a pointer - all instances have it pointing to
local variable in the same stack frame
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

just use it to serialize the assignment
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

When modifying code, ftrace has several checks to make sure things
are being done correctly. One of them is to make sure any code it
modifies is exactly what it expects it to be before it modifies it.
In order to do so with the new trampoline logic, it must be able
to find out what trampoline a function is hooked to in order to
see if the code that hooks to it is what's expected.

The logic to find the trampoline from a record (accounting descriptor
for a function that is hooked) needs to only look at the "old_hash"
of an ops that is being modified. The old_hash is the list of function
an ops is hooked to before its update. Since a record would only be
pointing to an ops that is being modified if it was already hooked
before.

Currently, it can pick a modified ops based on its new functions it
will be hooked to, and this picks the wrong trampoline and causes
the check to fail, disabling ftrace.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ftrace: squash into ordering of ops for modification

The code that checks for trampolines when modifying function hooks
tests against a modified ops "old_hash". But the ops old_hash pointer
is not being updated before the changes are made, making it possible
to not find the right hash to the callback and possibly causing
ftrace to break in accounting and disable itself.

Have the ops set its old_hash before the modifying takes place.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull MIPS fixes from Ralf Baechle:
 "This is the first round of fixes and tying up loose ends for MIPS.

   - plenty of fixes for build errors in specific obscure configurations
   - remove redundant code on the Lantiq platform
   - removal of a useless SEAD I2C driver that was causing a build issue
   - fix an earlier TLB exeption handler fix to also work on Octeon.
   - fix ISA level dependencies in FPU emulator's instruction decoding.
   - don't hardcode kernel command line in Octeon software emulator.
   - fix an earlier fix for the Loondson 2 clock setting"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: SEAD3: Fix I2C device registration.
  MIPS: SEAD3: Nuke PIC32 I2C driver.
  MIPS: ftrace: Fix a microMIPS build problem
  MIPS: MSP71xx: Fix build error
  MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled
  MIPS: Prevent compiler warning from cop2_{save,restore}
  MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle
  MIPS: idle: Remove leftover __pastwait symbol and its references
  MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds
  MIPS: ptrace.h: Add a missing include
  MIPS: ath79: Fix compilation error when CONFIG_PCI is disabled
  MIPS: MSP71xx: Remove compilation error when CONFIG_MIPS_MT is present
  MIPS: Octeon: Remove special case for simulator command line.
  MIPS: tlbex: Properly fix HUGE TLB Refill exception handler
  MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismerge
  pci: pci-lantiq: remove duplicate check on resource
  MIPS: Lasat: Add missing CONFIG_PROC_FS dependency to PICVUE_PROC
  MIPS: cp1emu: Fix ISA restrictions for cop1x_op instructions

Pull arm64 fixes from Catalin Marinas:

 - enable 48-bit VA space now that KVM has been fixed, together with a
   couple of fixes for pgd allocation alignment and initial memblock
   current_limit.  There is still a dependency on !ARM_SMMU which needs
   to be updated as it uses the page table manipulation macros of the
   host kernel
 - eBPF fixes following changes/conflicts during the merging window
 - Compat types affecting compat_elf_prpsinfo
 - Compilation error on UP builds
 - ASLR fix when /proc/sys/kernel/randomize_va_space == 0
 - DT definitions for CLCD support on ARMv8 model platform

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix memblock current_limit with 64K pages and 48-bit VA
  arm64: ASLR: Don't randomise text when randomise_va_space == 0
  arm64: vexpress: Add CLCD support to the ARMv8 model platform
  arm64: Fix compilation error on UP builds
  Documentation/arm64/memory.txt: fix typo
  net: bpf: arm64: minor fix of type in jited
  arm64: bpf: add 'load 64-bit immediate' instruction
  arm64: bpf: add 'shift by register' instructions
  net: bpf: arm64: address randomize and write protect JIT code
  arm64: mm: Correct fixmap pagetable types
  arm64: compat: fix compat types affecting struct compat_elf_prpsinfo
  arm64: Align less than PAGE_SIZE pgds naturally
  arm64: Allow 48-bits VA space without ARM_SMMU