- 26 Jan, 2017 40 commits
-
-
Felipe Balbi authored
commit d6214592 upstream. commit 0416e494 ("usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced") introduced a bug where we would leak DMA resources which would cause us to starve the system of them resulting in failing DMA transfers. Fix the bug by making sure that we always unmap EP0 requests since those are *always* mapped. Fixes: 0416e494 ("usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced") Tested-by:
Tomasz Medrek <tomaszx.medrek@intel.com> Reported-by:
Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Eva Rachel Retuya authored
commit b321a38d upstream. The oversampling ratio is controlled using the oversampling pins, OS [2:0] with OS2 being the MSB control bit, and OS0 the LSB control bit. The gpio connected to the OS2 pin is not being set correctly, only OS0 and OS1 pins are being set. Fix the typo to allow proper control of the oversampling pins. Signed-off-by:
Eva Rachel Retuya <eraretuya@gmail.com> Fixes: b9618c0c ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4") Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit e35d6d7c upstream. Bind to the interface, but do not register any ports, after having downloaded the firmware. The device will still disconnect and re-enumerate, but this way we avoid an error messages from being logged as part of the process: io_ti: probe of 1-1.3:1.0 failed with error -5 Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 015105b1 upstream. Make sure to drop the references taken by of_parse_phandle() and bus_find_device() before returning from am335x_get_phy_control(). Note that there is no guarantee that the devres-managed struct phy_control will be valid for the lifetime of the sibling phy device regardless of this change. Fixes: 3bb869c8 ("usb: phy: Add AM335x PHY driver") Acked-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Pan Bian authored
commit 3c3dd1e0 upstream. Function klsi_105_open() calls usb_control_msg() (to "enable read") and checks its return value. When the return value is unexpected, it only assigns the error code to the return variable retval, but does not terminate the exception path. This patch fixes the bug by inserting "goto err_generic_close;" when the call to usb_control_msg() fails. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Pan Bian <bianpan2016@163.com> [johan: rebase on prerequisite fix and amend commit message] Signed-off-by:
-
Takashi Iwai authored
commit 4763601a upstream. The function returns -EINVAL even if it builds the stream properly. The bogus error code sneaked in during the code refactoring, but it wasn't noticed until now since the returned error code itself is ignored in anyway. Kill it here, but there is no behavior change by this patch, obviously. Fixes: e5779998 ('ALSA: usb-audio: refactor code') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Geert Uytterhoeven authored
commit 3bc02bce upstream. If CONFIG_PM=n: drivers/usb/core/hub.c:107: warning: ‘hub_usb3_port_prepare_disable’ declared inline after being called drivers/usb/core/hub.c:107: warning: previous declaration of ‘hub_usb3_port_prepare_disable’ was here To fix this, move hub_port_disable() after hub_usb3_port_prepare_disable(), and adjust forward declarations. Fixes: 37be6676 ("usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Tony Lindgren authored
commit 8c300fe2 upstream. When unloading omap2430, we can get the following splat: WARNING: CPU: 1 PID: 295 at kernel/irq/manage.c:1478 __free_irq+0xa8/0x2c8 Trying to free already-free IRQ 4 ... [<c01a8b78>] (free_irq) from [<bf0aea84>] (musbhs_dma_controller_destroy+0x28/0xb0 [musb_hdrc]) [<bf0aea84>] (musbhs_dma_controller_destroy [musb_hdrc]) from [<bf09f88c>] (musb_remove+0xf0/0x12c [musb_hdrc]) [<bf09f88c>] (musb_remove [musb_hdrc]) from [<c056a384>] (platform_drv_remove+0x24/0x3c) ... This is because the irq number in use is 260 nowadays, and the dma controller is using u8 instead of int. Fixes: 6995eb68 ("USB: musb: enable low level DMA operation for Blackfin") Signed-off-by:
Tony Lindgren <tony@atomide.com> [b-liu@ti.com: added Fixes tag] Signed-off-by:
-
Heikki Krogerus authored
commit 8f8983a5 upstream. Intel Gemini Lake SoC has the same DWC3 than Broxton. Add the new ID to the supported Devices. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
commit c95a9f83 upstream. We normally use the passed in gfp flags for allocations, it's just these two which were missed. Fixes: 22d45f01 ("usb/xhci: replace pci_*_consistent() with dma_*_coherent()") Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Johan Hovold authored
commit fde1faf8 upstream. A static usb-serial-driver structure that is used to initialise the interrupt URB was modified during probe depending on the currently probed device type, something which could break a parallel probe of a device of a different type. Fix this up by overriding the default completion callback for MCS7715 devices in attach() instead. We may want to use two usb-serial driver instances for the two types later. Fixes: fb088e33 ("USB: serial: add support for serial port on the moschip 7715") Signed-off-by:
-
Johan Hovold authored
commit 75dd211e upstream. Do not submit the interrupt URB until after the parport has been successfully registered to avoid another use-after-free in the completion handler when accessing the freed parport private data in case of a racing completion. Fixes: b69578df ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Signed-off-by:
-
Johan Hovold authored
commit 91a1ff4d upstream. The interrupt URB was submitted on probe but never stopped on probe errors. This can lead to use-after-free issues in the completion handler when accessing the freed usb-serial struct: Unable to handle kernel paging request at virtual address 6b6b6be7 ... [<bf052e70>] (mos7715_interrupt_callback [mos7720]) from [<c052a894>] (__usb_hcd_giveback_urb+0x80/0x140) [<c052a894>] (__usb_hcd_giveback_urb) from [<c052a9a4>] (usb_hcd_giveback_urb+0x50/0x138) [<c052a9a4>] (usb_hcd_giveback_urb) from [<c0550684>] (musb_giveback+0xc8/0x1cc) Fixes: b69578df ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Signed-off-by:
-
Johan Hovold authored
commit b05aebc2 upstream. Fix NULL-pointer dereference at port open if a device lacks the expected bulk in and out endpoints. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf071c20>] (mos7720_open [mos7720]) from [<bf0490e0>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf0490e0>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf049d98>] (serial_open+0x48/0x6c [usbserial]) [<bf049d98>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 0f64478c ("USB: add USB serial mos7720 driver") Signed-off-by:
-
Johan Hovold authored
commit 5c75633e upstream. Fix NULL-pointer dereference in open() should the device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at mos7840_open+0x88/0x8dc [mos7840] Note that we continue to treat the interrupt-in endpoint as optional for now. Fixes: 3f542974 ("USB: Moschip 7840 USB-Serial Driver") Signed-off-by:
-
Johan Hovold authored
commit 21ce5784 upstream. Fix NULL-pointer dereference in write() should the device lack the expected interrupt-out endpoint: Unable to handle kernel NULL pointer dereference at virtual address 00000054 ... PC is at kobil_write+0x144/0x2a0 [kobil_sct] Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit 3dca0111 upstream. Fix NULL-pointer dereference when clearing halt at open should the device lack a bulk-out endpoint. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at cyberjack_open+0x40/0x9c [cyberjack] Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit 5afeef23 upstream. Fix NULL-pointer dereference in open() should the device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at oti6858_open+0x30/0x1d0 [oti6858] Note that a missing interrupt-in endpoint would have caused open() to fail. Fixes: 49cdee0e ("USB: oti6858 usb-serial driver (in Nokia CA-42 cable)") Signed-off-by:
-
Johan Hovold authored
commit 0dd40842 upstream. Fix NULL-pointer dereference when initialising URBs at open should a non-EPIC device lack a bulk-in or interrupt-in endpoint. Unable to handle kernel NULL pointer dereference at virtual address 00000028 ... PC is at edge_open+0x24c/0x3e8 [io_edgeport] Note that the EPIC-device probe path has the required sanity checks so this makes those checks partially redundant. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit ef079936 upstream. Fix NULL-pointer dereference in open() should a malicious device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 .. [<bf06a6b0>] (ti_open [ti_usb_3410_5052]) from [<bf02e118>] (serial_port_activate+0x68/0x98 [usbserial]) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit c4ac4496 upstream. Make sure to free the URB transfer buffer in case submission fails (e.g. due to a disconnect). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit 90507d54 upstream. Fix NULL-pointer dereference at open should the device lack a bulk-in or bulk-out endpoint: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at iuu_open+0x78/0x59c [iuu_phoenix] Fixes: 07c3b1a1 ("USB: remove broken usb-serial num_endpoints check") Signed-off-by:
-
Johan Hovold authored
commit 4f9785cc upstream. In case a device is left in "boot-mode" we must not register any port devices in order to avoid a NULL-pointer dereference on open due to missing endpoints. This could be used by a malicious device to trigger an OOPS: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf0caa84>] (edge_open [io_ti]) from [<bf0b0118>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf0b0118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf0b0da0>] (serial_open+0x48/0x6c [usbserial]) [<bf0b0da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit a323fefc upstream. Fix NULL-pointer dereference when clearing halt at open should a malicious device lack the expected endpoints when in download mode. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf011ed8>] (edge_open [io_ti]) from [<bf000118>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf000118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf000da0>] (serial_open+0x48/0x6c [usbserial]) [<bf000da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit cc090924 upstream. Fix NULL-pointer dereference in open() should the device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at spcp8x5_open+0x30/0xd0 [spcp8x5] Fixes: 619a6f1d ("USB: add usb-serial spcp8x5 driver") Signed-off-by:
-
Johan Hovold authored
commit 5d9b0f85 upstream. Check for the expected endpoints in attach() and fail loudly if not present. Note that failing to do this appears to be benign since da280e34 ("USB: keyspan_pda: clean up write-urb busy handling") which prevents a NULL-pointer dereference in write() by never marking a non-existent write-urb as free. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit 76ab439e upstream. Fix NULL-pointer dereference in open() should a type-0 or type-1 device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at pl2303_open+0x38/0xec [pl2303] Note that a missing interrupt-in endpoint would have caused open() to fail. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit f09d1886 upstream. The write URB was being killed using the synchronous interface while holding a spin lock in close(). Simply drop the lock and busy-flag update, something which would have been taken care of by the completion handler if the URB was in flight. Fixes: f7a33e60 ("USB: serial: add quatech2 usb to serial driver") Signed-off-by:
-
Johan Hovold authored
commit a5bc0194 upstream. Fix NULL-pointer dereferences at open() and disconnect() should the device lack the expected bulk-out endpoints: Unable to handle kernel NULL pointer dereference at virtual address 000000b4 ... [c0170ff0>] (__lock_acquire) from [<c0172f00>] (lock_acquire+0x108/0x264) [<c0172f00>] (lock_acquire) from [<c06a5090>] (_raw_spin_lock_irqsave+0x58/0x6c) [<c06a5090>] (_raw_spin_lock_irqsave) from [<c0470684>] (tty_port_tty_set+0x28/0xa4) [<c0470684>] (tty_port_tty_set) from [<bf08d384>] (omninet_open+0x30/0x40 [omninet]) [<bf08d384>] (omninet_open [omninet]) from [<bf07c118>] (serial_port_activate+0x68/0x98 [usbserial]) Unable to handle kernel NULL pointer dereference at virtual address 00000234 ... [<bf01f418>] (omninet_disconnect [omninet]) from [<bf0016c0>] (usb_serial_disconnect+0xe4/0x100 [usbserial]) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Mathias Nyman authored
commit ee8665e2 upstream. the tt_info provided by a HS hub might be in use to by a child device Make sure we free the devices in the correct order. This is needed in special cases such as when xhci controller is reset when resuming from hibernate, and all virt_devices are freed. Also free the virt_devices starting from max slot_id as children more commonly have higher slot_id than parent. Reported-by:
Guenter Roeck <groeck@chromium.org> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Wan Ahmad Zainie authored
commit 6c97cfc1 upstream. Intel Apollo Lake also requires XHCI_PME_STUCK_QUIRK. Adding its PCI ID to quirk. Signed-off-by:
Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 346e9973 upstream. If a device is unplugged and replugged during Sx system suspend some Intel xHC hosts will overwrite the CAS (Cold attach status) flag and no device connection is noticed in resume. A device in this state can be identified in resume if its link state is in polling or compliance mode, and the current connect status is 0. A device in this state needs to be warm reset. Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Observed on Cherryview and Apollolake as they go into compliance mode if LFPS times out during polling, and re-plugged devices are not discovered at resume. Signed-off-by:
-
Krzysztof Opasiak authored
commit 7e4da3fc upstream. By convention (according to doc) if function does not provide get_alt() callback composite framework should assume that it has only altsetting 0 and should respond with error if host tries to set other one. After commit dd4dff8b ("USB: composite: Fix bug: should test set_alt function pointer before use it") we started checking set_alt() callback instead of get_alt(). This check is useless as we check if set_alt() is set inside usb_add_function() and fail if it's NULL. Let's fix this check and move comment about why we check the get method instead of set a little bit closer to prevent future false fixes. Fixes: dd4dff8b ("USB: composite: Fix bug: should test set_alt function pointer before use it") Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
-
Alan Stern authored
commit bcdbeb84 upstream. The stop_activity() routine in dummy-hcd is supposed to unlink all active requests for every endpoint, among other things. But it doesn't handle ep0. As a result, fuzz testing can generate a WARNING like the following: WARNING: CPU: 0 PID: 4410 at drivers/usb/gadget/udc/dummy_hcd.c:672 dummy_free_request+0x153/0x170 Modules linked in: CPU: 0 PID: 4410 Comm: syz-executor Not tainted 4.9.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006a64ed10 ffffffff81f96b8a ffffffff41b58ab3 1ffff1000d4c9d35 ffffed000d4c9d2d ffff880065f8ac00 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 0000000041b58ab3 ffffffff859410e0 ffffffff813f0590 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff812b808f>] __warn+0x19f/0x1e0 kernel/panic.c:550 [<ffffffff812b831c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585 [<ffffffff830fcb13>] dummy_free_request+0x153/0x170 drivers/usb/gadget/udc/dummy_hcd.c:672 [<ffffffff830ed1b0>] usb_ep_free_request+0xc0/0x420 drivers/usb/gadget/udc/core.c:195 [<ffffffff83225031>] gadgetfs_unbind+0x131/0x190 drivers/usb/gadget/legacy/inode.c:1612 [<ffffffff830ebd8f>] usb_gadget_remove_driver+0x10f/0x2b0 drivers/usb/gadget/udc/core.c:1228 [<ffffffff830ec084>] usb_gadget_unregister_driver+0x154/0x240 drivers/usb/gadget/udc/core.c:1357 This patch fixes the problem by iterating over all the endpoints in the driver's ep array instead of iterating over the gadget's ep_list, which explicitly leaves out ep0. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Alan Stern authored
commit 0a8fd134 upstream. When checking a new device's descriptors, the USB core does not check for duplicate endpoint addresses. This can cause a problem when the sysfs files for those endpoints are created; trying to create multiple files with the same name will provoke a WARNING: WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0 sysfs: cannot create duplicate filename '/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05' Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59 [< inline >] create_dir lib/kobject.c:71 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229 [< inline >] kobject_add_varg lib/kobject.c:366 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263 This patch prevents the problem by checking for duplicate endpoint addresses during enumeration and skipping any duplicates. Signed-off-by:
-
Alan Stern authored
commit 1c069b05 upstream. Andrey Konovalov's fuzz testing of gadgetfs showed that we should improve the driver's checks for valid configuration descriptors passed in by the user. In particular, the driver needs to verify that the wTotalLength value in the descriptor is not too short (smaller than USB_DT_CONFIG_SIZE). And the check for whether wTotalLength is too large has to be changed, because the driver assumes there is always enough room remaining in the buffer to hold a device descriptor (at least USB_DT_DEVICE_SIZE bytes). This patch adds the additional check and fixes the existing check. It may do a little more than strictly necessary, but one extra check won't hurt. Signed-off-by:
-
Alan Stern authored
commit add333a8 upstream. Andrey Konovalov reports that fuzz testing with syzkaller causes a KASAN use-after-free bug report in gadgetfs: BUG: KASAN: use-after-free in gadgetfs_setup+0x208a/0x20e0 at addr ffff88003dfe5bf2 Read of size 2 by task syz-executor0/22994 CPU: 3 PID: 22994 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006df06a18 ffffffff81f96aba ffffffffe0528500 1ffff1000dbe0cd6 ffffed000dbe0cce ffff88006df068f0 0000000041b58ab3 ffffffff8598b4c8 ffffffff81f96828 1ffff1000dbe0ccd ffff88006df06708 ffff88006df06748 Call Trace: <IRQ> [ 201.343209] [< inline >] __dump_stack lib/dump_stack.c:15 <IRQ> [ 201.343209] [<ffffffff81f96aba>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff817e4dec>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:159 [< inline >] print_address_description mm/kasan/report.c:197 [<ffffffff817e5080>] kasan_report_error+0x1f0/0x4e0 mm/kasan/report.c:286 [< inline >] kasan_report mm/kasan/report.c:306 [<ffffffff817e562a>] __asan_report_load_n_noabort+0x3a/0x40 mm/kasan/report.c:337 [< inline >] config_buf drivers/usb/gadget/legacy/inode.c:1298 [<ffffffff8322c8fa>] gadgetfs_setup+0x208a/0x20e0 drivers/usb/gadget/legacy/inode.c:1368 [<ffffffff830fdcd0>] dummy_timer+0x11f0/0x36d0 drivers/usb/gadget/udc/dummy_hcd.c:1858 [<ffffffff814807c1>] call_timer_fn+0x241/0x800 kernel/time/timer.c:1308 [< inline >] expire_timers kernel/time/timer.c:1348 [<ffffffff81482de6>] __run_timers+0xa06/0xec0 kernel/time/timer.c:1641 [<ffffffff814832c1>] run_timer_softirq+0x21/0x80 kernel/time/timer.c:1654 [<ffffffff84f4af8b>] __do_softirq+0x2fb/0xb63 kernel/softirq.c:284 The cause of the bug is subtle. The dev_config() routine gets called twice by the fuzzer. The first time, the user data contains both a full-speed configuration descriptor and a high-speed config descriptor, causing dev->hs_config to be set. But it also contains an invalid device descriptor, so the buffer containing the descriptors is deallocated and dev_config() returns an error. The second time dev_config() is called, the user data contains only a full-speed config descriptor. But dev->hs_config still has the stale pointer remaining from the first call, causing the routine to think that there is a valid high-speed config. Later on, when the driver dereferences the stale pointer to copy that descriptor, we get a use-after-free access. The fix is simple: Clear dev->hs_config if the passed-in data does not contain a high-speed config descriptor. Signed-off-by:
-
Alan Stern authored
commit faab5098 upstream. Andrey Konovalov reports that fuzz testing with syzkaller causes a KASAN warning in gadgetfs: BUG: KASAN: slab-out-of-bounds in dev_config+0x86f/0x1190 at addr ffff88003c47e160 Write of size 65537 by task syz-executor0/6356 CPU: 3 PID: 6356 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88003c107ad8 ffffffff81f96aba ffffffff3dc11ef0 1ffff10007820eee ffffed0007820ee6 ffff88003dc11f00 0000000041b58ab3 ffffffff8598b4c8 ffffffff81f96828 ffffffff813fb4a0 ffff88003b6eadc0 ffff88003c107738 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96aba>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff817e4dec>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:159 [< inline >] print_address_description mm/kasan/report.c:197 [<ffffffff817e5080>] kasan_report_error+0x1f0/0x4e0 mm/kasan/report.c:286 [<ffffffff817e5705>] kasan_report+0x35/0x40 mm/kasan/report.c:306 [< inline >] check_memory_region_inline mm/kasan/kasan.c:308 [<ffffffff817e3fb9>] check_memory_region+0x139/0x190 mm/kasan/kasan.c:315 [<ffffffff817e4044>] kasan_check_write+0x14/0x20 mm/kasan/kasan.c:326 [< inline >] copy_from_user arch/x86/include/asm/uaccess.h:689 [< inline >] ep0_write drivers/usb/gadget/legacy/inode.c:1135 [<ffffffff83228caf>] dev_config+0x86f/0x1190 drivers/usb/gadget/legacy/inode.c:1759 [<ffffffff817fdd55>] __vfs_write+0x5d5/0x760 fs/read_write.c:510 [<ffffffff817ff650>] vfs_write+0x170/0x4e0 fs/read_write.c:560 [< inline >] SYSC_write fs/read_write.c:607 [<ffffffff81803a5b>] SyS_write+0xfb/0x230 fs/read_write.c:599 [<ffffffff84f47ec1>] entry_SYSCALL_64_fastpath+0x1f/0xc2 Indeed, there is a comment saying that the value of len is restricted to a 16-bit integer, but the code doesn't actually do this. This patch fixes the warning. It replaces the comment with a computation that forces the amount of data copied from the user in ep0_write() to be no larger than the wLength size for the control transfer, which is a 16-bit quantity. Signed-off-by:
-
Greg Kroah-Hartman authored
commit 0994b0a2 upstream. Andrey Konovalov reported that we were not properly checking the upper limit before of a device configuration size before calling memdup_user(), which could cause some problems. So set the upper limit to PAGE_SIZE * 4, which should be good enough for all devices. Reported-by:
-
Bartosz Golaszewski authored
commit ef37427a upstream. Similarly to the aemif clock - this screws up the linked list of clock children. Create a separate clock for mdio inheriting the rate from emac_clk. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> [nsekhar@ti.com: add a comment over mdio_clk to explaing its existence + commit headline updates] Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
