- 28 Apr, 2009 8 commits
-
-
Jesse Brandeburg authored
Inspired by: Vlad Yasevich <vladislav.yasevich@hp.com> This is the code to enable ixgbe for hardware offload support of CRC32c on both transmit and receive of SCTP traffic. only 82599 supports this offload, not 82598. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
Originally from: Vlad Yasevich <vladislav.yasevich@hp.com> This patch, both the driver portion and the sctp code was modified by Jesse Brandeburg and is Copyright(c) 2009 Intel Corporation. Thanks go to Vlad for starting this work. Intel 82576 chipset supports SCTP checksum offloading. This patch enables this functionality in the driver. A new NETIF feature is introduced for SCTP checksum offload. If the driver supports CRC32c checksum, it can set this feature flag. The hardware can offload both transmit and receive. Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
Jesse Brandeburg authored
this is the sctp code to enable hardware crc32c offload for adapters that support it. Originally by: Vlad Yasevich <vladislav.yasevich@hp.com> modified by Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Alexander Duyck authored
Both of these drivers do a check to verify ip_summed is set to CHECKSUM_UNNECESSARY prior to passing the packet to GRO. GRO itself already does such a check so it is redundant and can be removed as this will likely cause out of order issues when receiving a packet that didn't pass checksum validation. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Alexander Duyck authored
The igb driver was being incorrectly setup to only allow disabling receive checksum if multiqueue was disabled. This change corrects that so that RXCSUM is configured regardless of queue configuration. Signed-off-by:
-
Alexander Duyck authored
This change updates the timeout logic so that it is not possible to have a sucessful check for message and still return an error if countdown = 0. Signed-off-by:
Juha Leppanen <juha_motorsportscom@luukku.com> Signed-off-by:
-
Magnus Damm authored
This is V2 of the smsc911x fifo byteswap patch. The smsc911x hardware supports both big and little and endian hardware configurations, and the linux smsc911x driver currently detects word order. For correct operation on big endian platforms lacking swapped byte lanes the following patch is needed. Only fifo data is swapped, register data does not require any swapping. Signed-off-by:
Magnus Damm <damm@igel.co.jp> Acked-by:
Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by:
-
Jie Yang authored
Disable L1/L0s when link detected. We enable L1/L0s when link connected before, but there is some hareware error on some platform. So just diable this feature when link connected. This feature is about power saving. Signed-off-by:
Jie Yang <jie.yang@atheros.com> Signed-off-by:
-
- 27 Apr, 2009 32 commits
-
-
Herbert Xu authored
On a brand new GRO skb, we cannot call ip_hdr since the header may lie in the non-linear area. This patch adds the helper skb_gro_network_header to handle this. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
The skb_gro_* code fails to handle the case where a header starts in the linear area but ends in the frags area. Since the goal of skb_gro_* is to optimise the case of completely non-linear packets, we can simply bail out if we have anything in the linear area. Signed-off-by:
-
Vladislav Zolotarov authored
Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Vladislav Zolotarov authored
Signed-off-by:
-
Vladislav Zolotarov authored
>From now on FW will be downloaded from the binary file using request_firmware. There will be different files for every supported chip. Currently 57710 (e1) and 57711 (e1h). File names have the following format: bnx2x-<chip version>-<FW version>.fw. ihex versions of current FW files are submitted in the next patch. Each binary file has a header in the following format: struct bnx2x_fw_file_section { __be32 len; __be32 offset; } struct bnx2x_fw_file_hdr { struct bnx2x_fw_file_section init_ops; struct bnx2x_fw_file_section init_ops_offsets; struct bnx2x_fw_file_section init_data; struct bnx2x_fw_file_section tsem_int_table_data; struct bnx2x_fw_file_section tsem_pram_data; struct bnx2x_fw_file_section usem_int_table_data; struct bnx2x_fw_file_section usem_pram_data; struct bnx2x_fw_file_section csem_int_table_data; struct bnx2x_fw_file_section csem_pram_data; struct bnx2x_fw_file_section xsem_int_table_data; struct bnx2x_fw_file_section xsem_pram_data; struct bnx2x_fw_file_section fw_version; } Each bnx2x_fw_file_section contains the length and the offset of the appropriate section in the binary file. Values are stored in the big endian format. Data types of arrays: init_data __be32 init_ops_offsets __be16 XXsem_pram_data u8 XXsem_int_table_data u8 init_ops struct raw_op { u8 op; __be24 offset; __be32 data; } fw_version u8 >From now boundaries of a specific initialization stage are stored in init_ops_offsets array instead of being defined by separate macroes. The index in init_ops_offsets is calculated by BLOCK_OPS_IDX macro: #define BLOCK_OPS_IDX(block, stage, end) \ (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end)) Security: In addition to sanity check of array boundaries bnx2x will check a FW version. Additional checks might be added in the future. Signed-off-by: -
Vladislav Zolotarov authored
Signed-off-by:
-
David Woodhouse authored
When creating a certain types of VPN, NetworkManager will first attempt to find an available tun device by iterating through 'vpn%d' until it finds one that isn't already busy. Then it'll set that to be persistent and owned by the otherwise unprivileged user that the VPN dæmon itself runs as. There's a race condition here -- during the period where the vpn%d device is created and we're waiting for the VPN dæmon to actually connect and use it, if we try to create _another_ device we could end up re-using the same one -- because trying to open it again doesn't get -EBUSY as it would while it's _actually_ busy. So solve this, we add an IFF_TUN_EXCL flag which causes tun_set_iff() to fail if it would be opening an existing persistent tundevice -- so that we can make sure we're getting an entirely _new_ device. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Simon Arlott authored
Values of dB between -0.99 and -0.01 will be output with the wrong sign. This converts the negative value to positive and outputs it with a "-" prefix. Signed-off-by:
Simon Arlott <simon@fire.lp0.eu> Signed-off-by:
-
roel kluin authored
mac_to_intf() can return -1 when no device or function is found, but when mac->dma_if is unsigned. The error wasn't noticed. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Neil Horman authored
When I initially implemented this protocol, I disregarded the use of netlink attribute headers, thinking for my purposes they weren't needed. I've come to find out that, as I'm starting to work with sending down messages with associated data (like config messages), the kernel code spits out warnings about trailing data in a netlink skb that doesn't have an associated header on it. As such, I'm going to start including attribute headers in my netlink transaction, and so for completeness, I should likely include them on messages bound from the kernel to user space. This patch adds that header to the kernel, and bumps the protocol version accordingly Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Waskiewicz Jr, Peter P authored
82598 and 82599 do not support SFP 1G modules. Instead of allowing the driver to load, but never get link, rejecting the module and displaying a useful message is more preferrable. The framework for displaying the failure message already exists, now we just need to detect and reject the SFP modules. Signed-off-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
-
Alexander Duyck authored
The igb driver was switching between adapter->itr containing the EITR value and the number of interrupts per second. This resulted in high latencies being seen after brining the interface down and then back up. To resolve the issue the itr value will now only contain the value that should be programmed into EITR. Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Acked-by:
Ram Vepa <ram.vepa@neterion.com> Signed-off-by:
-
Alexander Beregalov authored
If vpath is NULL then hldev is NULL also. Signed-off-by:
-
Jiri Pirko authored
Pointed out by Sean E. Millichamp. Quote from Documentation/networking/bonding.txt: "Note that when a bonding interface has no active links, the driver will immediately reuse the first link that goes up, even if the updelay parameter has been specified (the updelay is ignored in this case). If there are slave interfaces waiting for the updelay timeout to expire, the interface that first went into that state will be immediately reused. This reduces down time of the network if the value of updelay has been overestimated, and since this occurs only in cases with no connectivity, there is no additional penalty for ignoring the updelay." This patch actually changes the behaviour in this way. Signed-off-by:
Jiri Pirko <jpirko@redhat.com> drivers/net/bonding/bond_main.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) Signed-off-by:
-
Jiri Pirko authored
This patch only changes the order of interfaces to use for checking slave link status in bond_check_dev_link() to priorize ethtool interface. Should safe some troubles as ethtool seems to be more supported. Jirka Signed-off-by:
-
Grant Likely authored
Modules are not supposed to use any of the *_initcall*() hooks as the entry point. fsl_pq_mdio.c was using subsys_initcall_sync() instead of module_init() to guarantee that the MDIO bus was initialized before the Ethernet driver goes looking for the phy. However, the recent OF helpers rework happens to also make sure PHY connection is deferred to .open time, so using an initcall is no longer necessary. This patch replaces the initcall with a more traditional an accepted module_init() call. Tested on Freescale MPC8349emitxgp eval board. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Grant Likely authored
This patch adds support for the Xilinx ll_temac 10/100/1000 Ethernet device. The ll_temac ipcore is typically used on Xilinx Virtex and Spartan designs attached to either a PowerPC 4xx or Microblaze processor. At the present moment, this driver only works with Virtex5 PowerPC designs because it assumes DCR is used to access the DMA registers. However, the low level access to DMA registers is abstracted and it should be easy to adapt for the other implementations. I'm posting this driver now as an RFC. There are still some things that need to be tightened up, but it does appear to be stable. Derived from driver code written by Yoshio Kashiwagi and David H. Lynch Jr. Tested on Xilinx ML507 eval board with Base System Builder generated FPGA design. Signed-off-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
-
Grant Likely authored
This patch simplifies the driver by making use of more common code. Signed-off-by:
-
Grant Likely authored
This patch modifies the bitbanged MDIO driver in the ep8248e platform code to use the common of_mdio infrastructure. Signed-off-by:
-
Grant Likely authored
This patch simplifies the driver by making use of more common code. Signed-off-by:
-
Grant Likely authored
This patch simplifies the driver by making use of more common code. Signed-off-by:
-
Grant Likely authored
This patch simplifies the driver by making use of more common code. Tested on Freescale MPC8349emitxgp eval board Signed-off-by:
-
Grant Likely authored
This patch simplifies the driver by making use of more common code. Tested on Freescale MPC8349emitxgp eval board Signed-off-by:
-
Grant Likely authored
The patch reworks the MPC5200 Fast Ethernet Controller (FEC) driver to use the of_mdio infrastructure for registering PHY devices from data out openfirmware device tree, and eliminates the assumption that the PHY for the FEC is always attached to the FEC's own MDIO bus. With this patch, the FEC can use a PHY attached to any MDIO bus if it is described in the device tree. Tested on Freescale Lite5200b eval board Signed-off-by:
-
Grant Likely authored
Add support for parsing the device tree for PHY devices on an MDIO bus. Currently many of the PowerPC ethernet drivers are open coding a solution for reading data out of the device tree to find the correct PHY device. This patch implements a set of common routines to: a) let MDIO bus drivers register phy_devices described in the tree, and b) let MAC drivers find the correct phy_device via the tree. Signed-off-by:
-
Grant Likely authored
Add phy_connect_direct() and phy_attach_direct() functions so that drivers can use a pointer to the phy_device instead of trying to determine the phy's bus_id string. This patch is useful for OF device tree descriptions of phy devices where the driver doesn't need or know what the bus_id value in order to get a phy_device pointer. Signed-off-by:
-
Grant Likely authored
This patch makes changes in preparation for supporting open firmware device tree descriptions of MDIO busses. Changes include: - Cleanup handling of phy_map[] entries; they are already NULLed when registering and so don't need to be re-cleared, and it is good practice to clear them out when unregistering. - Split phy_device registration out into a new function so that the OF helpers can do two stage registration (separate allocation and registration steps). Signed-off-by:
-
Grant Likely authored
of_parse_phandle() is a helper function to read and parse a phandle property and return a pointer to the resulting device_node. Signed-off-by:
-
Neil Horman authored
The IP MIB (RFC 4293) defines stats for InOctets, OutOctets, InMcastOctets and OutMcastOctets: http://tools.ietf.org/html/rfc4293 But it seems we don't track those in any way that easy to separate from other protocols. This patch adds those missing counters to the stats file. Tested successfully by me With help from Eric Dumazet. Signed-off-by:
-
John Dykstra authored
Remove redundant set of skb->dev (now handled for ethernet drivers by eth_type_trans()). Signed-off-by:
John Dykstra <john.dykstra1@gmail.com> Signed-off-by:
-
Rami Rosen authored
This patch removes an unused parameter (tb_stamp) from fib_table structure in include/net/ip_fib.h. Signed-off-by:
Rami Rosen <ramirose@gmail.com> Signed-off-by:
-
