- 15 Sep, 2016 40 commits
-
-
Takashi Sakamoto authored
commit 6b1ca4bc upstream. In hwdep interface of fireworks driver, accessing to user space is in a critical section with disabled local interrupt. Depending on architecture, accessing to user space can cause page fault exception. Then local processor stores machine status and handles the synchronous event. A handler corresponding to the event can call task scheduler to wait for preparing pages. In a case of usage of single core processor, the state to disable local interrupt is worse because it don't handle usual interrupts from hardware. This commit fixes this bug, performing the accessing outside spinlock. This commit also gives up counting the number of queued response messages to simplify ring-buffer management. Reported-by:
Vaishali Thakkar <vaishali.thakkar@oracle.com> Fixes: 555e8a8f('ALSA: fireworks: Add command/response functionality into hwdep interface') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Sakamoto authored
commit 04b2d9c9 upstream. In hwdep interface of firewire-tascam driver, accessing to user space is in a critical section with disabled local interrupt. Depending on architecture, accessing to user space can cause page fault exception. Then local processor stores machine status and handle the synchronous event. A handler corresponding to the event can call task scheduler to wait for preparing pages. In a case of usage of single core processor, the state to disable local interrupt is worse because it doesn't handle usual interrupts from hardware. This commit fixes this bug, by performing the accessing outside spinlock. Reported-by:
-
Ken Lin authored
commit 83d9956b upstream. Avoid getting sample rate on B850V3 CP2114 as it is unsupported and causes noisy "current rate is different from the runtime rate" messages when playback starts. Signed-off-by:
Ken Lin <ken.lin@advantech.com.tw> Signed-off-by:
Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by:
-
Eric Biggers authored
commit 002ced4b upstream. The FS_IOC_SET_ENCRYPTION_POLICY ioctl allowed setting an encryption policy on nondirectory files. This was unintentional, and in the case of nonempty regular files did not behave as expected because existing data was not actually encrypted by the ioctl. In the case of ext4, the user could also trigger filesystem errors in ->empty_dir(), e.g. due to mismatched "directory" checksums when the kernel incorrectly tried to interpret a regular file as a directory. This bug affected ext4 with kernels v4.8-rc1 or later and f2fs with kernels v4.6 and later. It appears that older kernels only permitted directories and that the check was accidentally lost during the refactoring to share the file encryption code between ext4 and f2fs. This patch restores the !S_ISDIR() check that was present in older kernels. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Eric Biggers authored
commit 163ae1c6 upstream. On an ext4 or f2fs filesystem with file encryption supported, a user could set an encryption policy on any empty directory(*) to which they had readonly access. This is obviously problematic, since such a directory might be owned by another user and the new encryption policy would prevent that other user from creating files in their own directory (for example). Fix this by requiring inode_owner_or_capable() permission to set an encryption policy. This means that either the caller must own the file, or the caller must have the capability CAP_FOWNER. (*) Or also on any regular file, for f2fs v4.6 and later and ext4 v4.8-rc1 and later; a separate bug fix is coming for that. Signed-off-by:
-
Horia Geantă authored
commit 8b18e235 upstream. For algorithms that implement IV generators before the crypto ops, the IV needed for decryption is initially located in req->src scatterlist, not in req->iv. Avoid copying the IV into req->iv by modifying the (givdecrypt) descriptors to load it directly from req->src. aead_givdecrypt() is no longer needed and goes away. Fixes: 479bcc7c ("crypto: caam - Convert authenc to new AEAD interface") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Chuck Lever authored
commit 564471d2 upstream. Clean up: FMR is about to replace the rpcrdma_map_one code with scatterlists. Move the scatterlist fields out of the FRWR-specific union and into the generic part of rpcrdma_mw. One minor change: -EIO is now returned if FRWR registration fails. The RPC is terminated immediately, since the problem is likely due to a software bug, thus retrying likely won't help. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Wanpeng Li authored
commit 2e63ad4b upstream. native_smp_prepare_cpus -> default_setup_apic_routing -> enable_IR_x2apic -> irq_remapping_prepare -> intel_prepare_irq_remapping -> intel_setup_irq_remapping So IR table is setup even if "noapic" boot parameter is added. As a result we crash later when the interrupt affinity is set due to a half initialized remapping infrastructure. Prevent remap initialization when IOAPIC is disabled. Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Benjamin Coddington authored
commit a77ec83a upstream. The address of the iovec &vq->iov[out] is not guaranteed to contain the scsi command's response iovec throughout the lifetime of the command. Rather, it is more likely to contain an iovec from an immediately following command after looping back around to vhost_get_vq_desc(). Pass along the iovec entirely instead. Fixes: 79c14141 ("vhost/scsi: Convert completion path to use copy_to_iter") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Paul Burton authored
commit 2564970a upstream. If an IRQ is setup using __setup_irq(), which is used by the request_irq() family of functions, and we are using an SMP kernel then the affinity of the IRQ will be set via setup_affinity() immediately after the IRQ is enabled. This call to gic_set_affinity() will lead to the interrupt being mapped to a VPE. However there are other ways to use IRQs which don't cause affinity to be set, for example if it is used to chain to another IRQ controller with irq_set_chained_handler_and_data(). The irq_set_chained_handler_and_data() code path will enable the IRQ, but will not trigger a call to gic_set_affinity() and in this case nothing will map the interrupt to a VPE, meaning that the interrupt is never received. Fix this by implementing the activate operation for the GIC device IRQ domain, using gic_shared_irq_domain_map() to map the interrupt to the correct pin of cpu 0. Fixes: c98c1822 ("irqchip/mips-gic: Add device hierarchy domain") Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/20160819170715.27820-2-paul.burton@imgtec.comSigned-off-by:
-
Paul Burton authored
commit 6a33fa2b upstream. gic_shared_irq_domain_map() is called from gic_irq_domain_alloc() where the wrong chip has been set, and is then overwritten. Tidy this up by setting the correct chip the first time, and setting the handle_level_irq handler from gic_irq_domain_alloc() too. gic_shared_irq_domain_map() is also called from gic_irq_domain_map(), which now calls irq_set_chip_and_handler() to retain its previous behaviour. This patch prepares for a follow-on which will call gic_shared_irq_domain_map() from a callback where the lock on the struct irq_desc is held, which without this change would cause the call to irq_set_chip_and_handler() to lead to a deadlock. Fixes: c98c1822 ("irqchip/mips-gic: Add device hierarchy domain") Signed-off-by:
-
Kent Overstreet authored
commit acc9cf8c upstream. This patch fixes a cachedev registration-time allocation deadlock. This can deadlock on boot if your initrd auto-registeres bcache devices: Allocator thread: [ 720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds. [ 720.732361] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.732963] [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache] [ 720.733538] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.734137] [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache] [ 720.734715] [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache] [ 720.735311] [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950 [ 720.735884] [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache] Registration thread: [ 720.710403] INFO: task bash:3531 blocked for more than 120 seconds. [ 720.715226] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.715805] [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache] [ 720.716409] [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache] [ 720.717008] [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache] [ 720.717586] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.718191] [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache] [ 720.718766] [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70 [ 720.719369] [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350 [ 720.719968] [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache] [ 720.720553] [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache] [ 720.721153] [<ffffffff81354cef>] kobj_attr_store+0xf/0x20 [ 720.721730] [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50 [ 720.722327] [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180 [ 720.722904] [<ffffffff81225177>] __vfs_write+0x37/0x110 [ 720.723503] [<ffffffff81228048>] ? __sb_start_write+0x58/0x110 [ 720.724100] [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0 [ 720.724675] [<ffffffff812258a9>] vfs_write+0xa9/0x1b0 [ 720.725275] [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70 [ 720.725849] [<ffffffff81226755>] SyS_write+0x55/0xd0 [ 720.726451] [<ffffffff8106a390>] ? do_page_fault+0x30/0x80 [ 720.727045] [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71 The fifo code in upstream bcache can't use the last element in the buffer, which was the cause of the bug: if you asked for a power of two size, it'd give you a fifo that could hold one less than what you asked for rather than allocating a buffer twice as big. Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Tested-by:
Eric Wheeler <bcache@linux.ewheeler.net> Signed-off-by:
-
Vegard Nossum authored
commit e9e5e3fa upstream. I got this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) CPU: 0 PID: 5505 Comm: syz-executor Not tainted 4.8.0-rc2+ #161 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff880113415940 task.stack: ffff880118350000 RIP: 0010:[<ffffffff8172cb32>] [<ffffffff8172cb32>] bd_mount+0x52/0xa0 RSP: 0018:ffff880118357ca0 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffffffffffffffff RCX: ffffc90000bb6000 RDX: 0000000000000018 RSI: ffffffff846d6b20 RDI: 00000000000000c7 RBP: ffff880118357cb0 R08: ffff880115967c68 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801188211e8 R13: ffffffff847baa20 R14: ffff8801139cb000 R15: 0000000000000080 FS: 00007fa3ff6c0700(0000) GS:ffff88011aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc1d8cc7e78 CR3: 0000000109f20000 CR4: 00000000000006f0 DR0: 000000000000001e DR1: 000000000000001e DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Stack: ffff880112cfd6c0 ffff8801188211e8 ffff880118357cf0 ffffffff8167f207 ffffffff816d7a1e ffff880112a413c0 ffffffff847baa20 ffff8801188211e8 0000000000000080 ffff880112cfd6c0 ffff880118357d38 ffffffff816dce0a Call Trace: [<ffffffff8167f207>] mount_fs+0x97/0x2e0 [<ffffffff816d7a1e>] ? alloc_vfsmnt+0x55e/0x760 [<ffffffff816dce0a>] vfs_kern_mount+0x7a/0x300 [<ffffffff83c3247c>] ? _raw_read_unlock+0x2c/0x50 [<ffffffff816dfc87>] do_mount+0x3d7/0x2730 [<ffffffff81235fd4>] ? trace_do_page_fault+0x1f4/0x3a0 [<ffffffff816df8b0>] ? copy_mount_string+0x40/0x40 [<ffffffff8161ea81>] ? memset+0x31/0x40 [<ffffffff816df73e>] ? copy_mount_options+0x1ee/0x320 [<ffffffff816e2a02>] SyS_mount+0xb2/0x120 [<ffffffff816e2950>] ? copy_mnt_ns+0x970/0x970 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c3282a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 83 e8 63 1b fc ff 48 85 c0 48 89 c3 74 4c e8 56 35 d1 ff 48 8d bb c8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 36 4c 8b a3 c8 00 00 00 48 b8 00 00 00 00 00 fc RIP [<ffffffff8172cb32>] bd_mount+0x52/0xa0 RSP <ffff880118357ca0> ---[ end trace 13690ad962168b98 ]--- mount_pseudo() returns ERR_PTR(), not NULL, on error. Fixes: 3684aa70 ("block-dev: enable writeback cgroup support") Cc: Shaohua Li <shli@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Vincent Stehlé authored
commit c0082e98 upstream. An assertion in layout_in_gaps() verifies that the gap_lebs pointer is below the maximum bound. When computing this maximum bound the idx_lebs count is multiplied by sizeof(int), while C pointers arithmetic does take into account the size of the pointed elements implicitly already. Remove the multiplication to fix the assertion. Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
Vincent Stehlé <vincent.stehle@intel.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Richard Weinberger authored
commit 17ce1eb0 upstream. UBIFS uses full names to work with xattrs, therefore we have to use xattr_full_name() to obtain the xattr prefix as string. Cc: Andreas Gruenbacher <agruenba@redhat.com> Fixes: 2b88fc21 ("ubifs: Switch to generic xattr handlers") Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Tested-by:
Dongsheng Yang <dongsheng081251@gmail.com> Signed-off-by:
-
Tomas Winkler authored
commit 8c57cac1 upstream. Sunrise Point PCH with SPS Firmware doesn't expose working MEI interface, we need to quirk it out. The SPS Firmware is identifiable only on the first PCI function of the device. Tested-by:
Sujith Pandel <sujith_pandel@dell.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Miklos Szeredi authored
commit e1ff3dd1 upstream. Workdir creation fails in latest kernel. Fix by allowing EOPNOTSUPP as a valid return value from vfs_removexattr(XATTR_NAME_POSIX_ACL_*). Upper filesystem may not support ACL and still be perfectly able to support overlayfs. Reported-by:
Martin Ziegler <ziegler@uni-freiburg.de> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: c11b9fdd ("ovl: remove posix_acl_default from workdir") Signed-off-by:
-
Miklos Szeredi authored
commit 7cb35119 upstream. Be defensive about what underlying fs provides us in the returned xattr list buffer. If it's not properly null terminated, bail out with a warning insead of BUG. Signed-off-by:
-
Miklos Szeredi authored
commit c11b9fdd upstream. Clear out posix acl xattrs on workdir and also reset the mode after creation so that an inherited sgid bit is cleared. Signed-off-by:
-
Miklos Szeredi authored
commit 0956254a upstream. When a copy up of a directory occurs which has the opaque xattr set, the xattr remains in the upper directory. The immediate behavior with overlayfs is that the upper directory is not treated as opaque, however after a remount the opaque flag is used and upper directory is treated as opaque. This causes files created in the lower layer to be hidden when using multiple lower directories. Fix by not copying up the opaque flag. To reproduce: ----8<---------8<---------8<---------8<---------8<---------8<---- mkdir -p l/d/s u v w mnt mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt rm -rf mnt/d/ mkdir -p mnt/d/n umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt touch mnt/d/foo umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt ls mnt/d ----8<---------8<---------8<---------8<---------8<---------8<---- output should be: "foo n" Reported-by:
Derek McGowan <dmcg@drizz.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291Signed-off-by:
-
Miklos Szeredi authored
commit eea2fb48 upstream. When mounting overlayfs it needs a clean "work" directory under the supplied workdir. Previously the mount code removed this directory if it already existed and created a new one. If the removal failed (e.g. directory was not empty) then it fell back to a read-only mount not using the workdir. While this has never been reported, it is possible to get a non-empty "work" dir from a previous mount of overlayfs in case of crash in the middle of an operation using the work directory. In this case the left over state should be discarded and the overlay filesystem will be consistent, guaranteed by the atomicity of operations on moving to/from the workdir to the upper layer. This patch implements cleaning out any files left in workdir. It is implemented using real recursion for simplicity, but the depth is limited to 2, because the worst case is that of a directory containing whiteouts under "work". Signed-off-by:
-
Jan Beulich authored
commit 9a035a40 upstream. This should really only be done for XS_TRANSACTION_END messages, or else at least some of the xenstore-* tools don't work anymore. Fixes: 0beef634 ("xenbus: don't BUG() on user mode induced condition") Reported-by:
Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by:
Jan Beulich <jbeulich@suse.com> Tested-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
John Stultz authored
commit 27727df2 upstream. When I added some extra sanity checking in timekeeping_get_ns() under CONFIG_DEBUG_TIMEKEEPING, I missed that the NMI safe __ktime_get_fast_ns() method was using timekeeping_get_ns(). Thus the locking added to the debug checks broke the NMI-safety of __ktime_get_fast_ns(). This patch open-codes the timekeeping_get_ns() logic for __ktime_get_fast_ns(), so can avoid any deadlocks in NMI. Fixes: 4ca22c26 "timekeeping: Add warnings when overflows or underflows are observed" Reported-by:
Steven Rostedt <rostedt@goodmis.org> Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/1471993702-29148-2-git-send-email-john.stultz@linaro.orgSigned-off-by:
-
John Stultz authored
commit a4f8f666 upstream. It was reported that hibernation could fail on the 2nd attempt, where the system hangs at hibernate() -> syscore_resume() -> i8237A_resume() -> claim_dma_lock(), because the lock has already been taken. However there is actually no other process would like to grab this lock on that problematic platform. Further investigation showed that the problem is triggered by setting /sys/power/pm_trace to 1 before the 1st hibernation. Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend, and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller than 1970) to the release date of that motherboard during POST stage, thus after resumed, it may seem that the system had a significant long sleep time which is a completely meaningless value. Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the sleep time happened to be set to 1, fls() returns 32 and we add 1 to sleep_time_bin[32], which causes an out of bounds array access and therefor memory being overwritten. As depicted by System.map: 0xffffffff81c9d080 b sleep_time_bin 0xffffffff81c9d100 B dma_spin_lock the dma_spin_lock.val is set to 1, which caused this problem. This patch adds a sanity check in tk_debug_account_sleep_time() to ensure we don't index past the sleep_time_bin array. [jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the issue slightly differently, but borrowed his excelent explanation of the issue here.] Fixes: 5c83545f "power: Add option to log time spent in suspend" Reported-by:
Janek Kozicki <cosurgi@gmail.com> Reported-by:
Chen Yu <yu.c.chen@intel.com> Signed-off-by:
-
Dave Chinner authored
commit f3d7ebde upstream. From inspection, the superblock sb_inprogress check is done in the verifier and triggered only for the primary superblock via a "bp->b_bn == XFS_SB_DADDR" check. Unfortunately, the primary superblock is an uncached buffer, and hence it is configured by xfs_buf_read_uncached() with: bp->b_bn = XFS_BUF_DADDR_NULL; /* always null for uncached buffers */ And so this check never triggers. Fix it. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Christoph Huber authored
commit 3e103a65 upstream. commit cbaadf0f ("ASoC: atmel_ssc_dai: refactor the startup and shutdown") refactored code such that the SSC is reset on every startup; this breaks duplex audio (e.g. first start audio playback, then start record, causing the playback to stop/hang) Fixes: cbaadf0f (ASoC: atmel_ssc_dai: refactor the startup and shutdown) Signed-off-by:
Christoph Huber <c.huber@bct-electronic.com> Signed-off-by:
Peter Meerwald-Stadler <p.meerwald@bct-electronic.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Eric Anholt authored
commit 552416c1 upstream. We'd end up NULL pointer dereferencing because we didn't take the error path out in the parent. Fixes igt vc4_lookup_fail test. Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: d5b1a78a ("drm/vc4: Add support for drawing 3D frames.") Signed-off-by:
-
Eric Anholt authored
commit 9326e6f2 upstream. Overflow memory handling is tricky: While it's still referenced by the BPO registers, we want to keep it from being freed. When we are putting a new set of overflow memory in the registers, we need to assign the old one to the last rendering job using it. We were looking at "what's currently running in the binner", but since the bin/render submission split, we may end up with the binner completing and having no new job while the renderer is still processing. So, if we don't find a bin job at all, look at the highest-seqno (last) render job to attach our overflow to. Signed-off-by:
-
Eric Anholt authored
commit d5fb46e0 upstream. If you managed to exceed the limit to switch to vmalloc, we'd use the wrong free. Signed-off-by:
-
Rob Clark authored
commit 89f82cbb upstream. Use instead __copy_from_user_inatomic() and fallback to slow-path where we drop and re-aquire the lock in case of fault. Reported-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Daniel Vetter authored
commit 6f00975c upstream. Somehow this one slipped through, which means drivers without modeset support can be oopsed (since those also don't call drm_mode_config_init, which means the crtc lookup will chase an uninitalized idr). Reported-by:
Alexander Potapenko <glider@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Mario Kleiner authored
commit add1fa75 upstream. Due to assigning the 'replaced' value instead of or'ing it, if drm_atomic_crtc_set_property() gets called multiple times, the last call will define the color_mgmt_changed flag, so a non-updating call to a property can reset the flag and prevent actual hw state updates required by preceding property updates. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Christian König authored
commit ae5b80d2 upstream. Looks like some RV6xx have problems with that. bug: https://bugs.freedesktop.org/show_bug.cgi?id=97099Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Christian König authored
commit 13f479b9 upstream. This bug seems to be present for a very long time. Signed-off-by:
-
Oliver Neukum authored
This is an alternative to eccf2a4e which inadvertedly fixes an oops in probe by a device returning malformed descriptors. The problem allows a malicious device to attack the kernel. That patch in v4.8 is too extensive to backport to stable. Thus this alternative fix is needed up to v4.7 Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by:
Binyamin Sharet <bsharet@cisco.com> Tested-by:
-
Balbir Singh authored
commit 568ac888 upstream. cgroup_threadgroup_rwsem is acquired in read mode during process exit and fork. It is also grabbed in write mode during __cgroups_proc_write(). I've recently run into a scenario with lots of memory pressure and OOM and I am beginning to see systemd __switch_to+0x1f8/0x350 __schedule+0x30c/0x990 schedule+0x48/0xc0 percpu_down_write+0x114/0x170 __cgroup_procs_write.isra.12+0xb8/0x3c0 cgroup_file_write+0x74/0x1a0 kernfs_fop_write+0x188/0x200 __vfs_write+0x6c/0xe0 vfs_write+0xc0/0x230 SyS_write+0x6c/0x110 system_call+0x38/0xb4 This thread is waiting on the reader of cgroup_threadgroup_rwsem to exit. The reader itself is under memory pressure and has gone into reclaim after fork. There are times the reader also ends up waiting on oom_lock as well. __switch_to+0x1f8/0x350 __schedule+0x30c/0x990 schedule+0x48/0xc0 jbd2_log_wait_commit+0xd4/0x180 ext4_evict_inode+0x88/0x5c0 evict+0xf8/0x2a0 dispose_list+0x50/0x80 prune_icache_sb+0x6c/0x90 super_cache_scan+0x190/0x210 shrink_slab.part.15+0x22c/0x4c0 shrink_zone+0x288/0x3c0 do_try_to_free_pages+0x1dc/0x590 try_to_free_pages+0xdc/0x260 __alloc_pages_nodemask+0x72c/0xc90 alloc_pages_current+0xb4/0x1a0 page_table_alloc+0xc0/0x170 __pte_alloc+0x58/0x1f0 copy_page_range+0x4ec/0x950 copy_process.isra.5+0x15a0/0x1870 _do_fork+0xa8/0x4b0 ppc_clone+0x8/0xc In the meanwhile, all processes exiting/forking are blocked almost stalling the system. This patch moves the threadgroup_change_begin from before cgroup_fork() to just before cgroup_canfork(). There is no nee to worry about threadgroup changes till the task is actually added to the threadgroup. This avoids having to call reclaim with cgroup_threadgroup_rwsem held. tj: Subject and description edits. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Acked-by:
Zefan Li <lizefan@huawei.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Ming Lei authored
commit 4d70dca4 upstream. After arbitrary bio size was introduced, the incoming bio may be very big. We have to split the bio into small bios so that each holds at most BIO_MAX_PAGES bvecs for safety reason, such as bio_clone(). This patch fixes the following kernel crash: > [ 172.660142] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 > [ 172.660229] IP: [<ffffffff811e53b4>] bio_trim+0xf/0x2a > [ 172.660289] PGD 7faf3e067 PUD 7f9279067 PMD 0 > [ 172.660399] Oops: 0000 [#1] SMP > [...] > [ 172.664780] Call Trace: > [ 172.664813] [<ffffffffa007f3be>] ? raid1_make_request+0x2e8/0xad7 [raid1] > [ 172.664846] [<ffffffff811f07da>] ? blk_queue_split+0x377/0x3d4 > [ 172.664880] [<ffffffffa005fb5f>] ? md_make_request+0xf6/0x1e9 [md_mod] > [ 172.664912] [<ffffffff811eb860>] ? generic_make_request+0xb5/0x155 > [ 172.664947] [<ffffffffa0445c89>] ? prio_io+0x85/0x95 [bcache] > [ 172.664981] [<ffffffffa0448252>] ? register_cache_set+0x355/0x8d0 [bcache] > [ 172.665016] [<ffffffffa04497d3>] ? register_bcache+0x1006/0x1174 [bcache] The issue can be reproduced by the following steps: - create one raid1 over two virtio-blk - build bcache device over the above raid1 and another cache device and bucket size is set as 2Mbytes - set cache mode as writeback - run random write over ext4 on the bcache device Fixes: 54efd50b(block: make generic_make_request handle arbitrarily sized bios) Reported-by:
Sebastian Roesner <sroesner-kernelorg@roesner-online.de> Reported-by:
Eric Wheeler <bcache@lists.ewheeler.net> Cc: Shaohua Li <shli@fb.com> Acked-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Bart Van Assche authored
commit 1b856086 upstream. blk_set_queue_dying() can be called while another thread is submitting I/O or changing queue flags, e.g. through dm_stop_queue(). Hence protect the QUEUE_FLAG_DYING flag change with locking. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Daeho Jeong authored
commit b47820ed upstream. We temporally change checksum fields in buffers of some types of metadata into '0' for verifying the checksum values. By doing this without locking the buffer, some metadata's checksums, which are being committed or written back to the storage, could be damaged. In our test, several metadata blocks were found with damaged metadata checksum value during recovery process. When we only verify the checksum value, we have to avoid modifying checksum fields directly. Signed-off-by:
Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by:
Youngjin Gil <youngjin.gil@samsung.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Cc: Török Edwin <edwin@etorok.net> Signed-off-by:
-
Jan Kara authored
commit 2e81a4ee upstream. When we need to move xattrs into external xattr block, we call ext4_xattr_block_set() from ext4_expand_extra_isize_ea(). That may end up calling ext4_mark_inode_dirty() again which will recurse back into the inode expansion code leading to deadlocks. Protect from recursion using EXT4_STATE_NO_EXPAND inode flag and move its management into ext4_expand_extra_isize_ea() since its manipulation is safe there (due to xattr_sem) from possible races with ext4_xattr_set_handle() which plays with it as well. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
