- 04 Feb, 2016 40 commits
-
-
Rob Clark authored
commit 96c5d076 upstream. Signed-off-by:
Rob Clark <robdclark@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Takashi Iwai authored
commit 7ee96216 upstream. ALSA dummy driver can switch the timer backend between system timer and hrtimer via its hrtimer module option. This can be also switched dynamically via sysfs, but it may lead to a memory corruption when switching is done while a PCM stream is running; the stream instance for the newly switched timer method tries to access the memory that was allocated by another timer method although the sizes differ. As the simplest fix, this patch just disables the switch via sysfs by dropping the writable bit. BugLink: http://lkml.kernel.org/r/CACT4Y+ZGEeEBntHW5WHn2GoeE0G_kRrCmUh6=dWyy-wfzvuJLg@mail.gmail.comReported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Arnd Bergmann authored
commit fb2a24a1 upstream. There are two definitions of pxa_cpufreq_change_voltage, with slightly different prototypes after one of them had its argument marked 'const'. Now the other one (for !CONFIG_REGULATOR) produces a harmless warning: drivers/cpufreq/pxa2xx-cpufreq.c: In function 'pxa_set_target': drivers/cpufreq/pxa2xx-cpufreq.c:291:36: warning: passing argument 1 of 'pxa_cpufreq_change_voltage' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); ^ drivers/cpufreq/pxa2xx-cpufreq.c:205:12: note: expected 'struct pxa_freqs *' but argument is of type 'const struct pxa_freqs *' static int pxa_cpufreq_change_voltage(struct pxa_freqs *pxa_freq) ^ This changes the prototype in the same way as the other, which avoids the warning. Fixes: 03c22990 (cpufreq: pxa: make pxa_freqs arrays const) Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Viresh Kumar authored
commit e4b133cc upstream. There is a race discovered by Juri, where we are able to: - create and read a sysfs file before policy->governor_data is being set to a non NULL value. OR - set policy->governor_data to NULL, and reading a file before being destroyed. And so such a crash is reported: Unable to handle kernel NULL pointer dereference at virtual address 0000000c pgd = edfc8000 [0000000c] *pgd=bfc8c835 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 4 PID: 1730 Comm: cat Not tainted 4.5.0-rc1+ #463 Hardware name: ARM-Versatile Express task: ee8e8480 ti: ee930000 task.ti: ee930000 PC is at show_ignore_nice_load_gov_pol+0x24/0x34 LR is at show+0x4c/0x60 pc : [<c058f1bc>] lr : [<c058ae88>] psr: a0070013 sp : ee931dd0 ip : ee931de0 fp : ee931ddc r10: ee4bc290 r9 : 00001000 r8 : ef2cb000 r7 : ee4bc200 r6 : ef2cb000 r5 : c0af57b0 r4 : ee4bc2e0 r3 : 00000000 r2 : 00000000 r1 : c0928df4 r0 : ef2cb000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: adfc806a DAC: 00000051 Process cat (pid: 1730, stack limit = 0xee930210) Stack: (0xee931dd0 to 0xee932000) 1dc0: ee931dfc ee931de0 c058ae88 c058f1a4 1de0: edce3bc0 c07bfca4 edce3ac0 00001000 ee931e24 ee931e00 c01fcb90 c058ae48 1e00: 00000001 edce3bc0 00000000 00000001 ee931e50 ee8ff480 ee931e34 ee931e28 1e20: c01fb33c c01fcb0c ee931e8c ee931e38 c01a5210 c01fb314 ee931e9c ee931e48 1e40: 00000000 edce3bf0 befe4a00 ee931f78 00000000 00000000 000001e4 00000000 1e60: c00545a8 edce3ac0 00001000 00001000 befe4a00 ee931f78 00000000 00001000 1e80: ee931ed4 ee931e90 c01fbed8 c01a5038 ed085a58 00020000 00000000 00000000 1ea0: c0ad72e4 ee931f78 ee8ff488 ee8ff480 c077f3fc 00001000 befe4a00 ee931f78 1ec0: 00000000 00001000 ee931f44 ee931ed8 c017c328 c01fbdc4 00001000 00000000 1ee0: ee8ff480 00001000 ee931f44 ee931ef8 c017c65c c03deb10 ee931fac ee931f08 1f00: c0009270 c001f290 c0a8d968 ef2cb000 ef2cb000 ee8ff480 00000020 ee8ff480 1f20: ee8ff480 befe4a00 00001000 ee931f78 00000000 00000000 ee931f74 ee931f48 1f40: c017d1ec c017c2f8 c019c724 c019c684 ee8ff480 ee8ff480 00001000 befe4a00 1f60: 00000000 00000000 ee931fa4 ee931f78 c017d2a8 c017d160 00000000 00000000 1f80: 000a9f20 00001000 befe4a00 00000003 c000ffe4 ee930000 00000000 ee931fa8 1fa0: c000fe40 c017d264 000a9f20 00001000 00000003 befe4a00 00001000 00000000 Unable to handle kernel NULL pointer dereference at virtual address 0000000c 1fc0: 000a9f20 00001000 befe4a00 00000003 00000000 00000000 00000003 00000001 pgd = edfc4000 [0000000c] *pgd=bfcac835 1fe0: 00000000 befe49dc 000197f8 b6e35dfc 60070010 00000003 3065b49d 134ac2c9 [<c058f1bc>] (show_ignore_nice_load_gov_pol) from [<c058ae88>] (show+0x4c/0x60) [<c058ae88>] (show) from [<c01fcb90>] (sysfs_kf_seq_show+0x90/0xfc) [<c01fcb90>] (sysfs_kf_seq_show) from [<c01fb33c>] (kernfs_seq_show+0x34/0x38) [<c01fb33c>] (kernfs_seq_show) from [<c01a5210>] (seq_read+0x1e4/0x4e4) [<c01a5210>] (seq_read) from [<c01fbed8>] (kernfs_fop_read+0x120/0x1a0) [<c01fbed8>] (kernfs_fop_read) from [<c017c328>] (__vfs_read+0x3c/0xe0) [<c017c328>] (__vfs_read) from [<c017d1ec>] (vfs_read+0x98/0x104) [<c017d1ec>] (vfs_read) from [<c017d2a8>] (SyS_read+0x50/0x90) [<c017d2a8>] (SyS_read) from [<c000fe40>] (ret_fast_syscall+0x0/0x1c) Code: e5903044 e1a00001 e3081df4 e34c1092 (e593300c) ---[ end trace 5994b9a5111f35ee ]--- Fix that by making sure, policy->governor_data is updated at the right places only. Reported-and-tested-by:
Juri Lelli <juri.lelli@arm.com> Signed-off-by:
-
Slava Grigorev authored
commit fe6fc1f1 upstream. Properly setup the DFS divider for DP audio for DCE4.1. Signed-off-by:
Slava Grigorev <slava.grigorev@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Slava Grigorev authored
commit a64c9dab upstream. Move encoding of DFS (digital frequency synthesizer) divider into a separate function and improve calculation precision. Signed-off-by:
-
Slava Grigorev authored
commit c9a392ea upstream. This is preparation for the fixes in the following patches. Signed-off-by:
-
Jann Horn authored
commit 103502a3 upstream. Before this patch, a process with some permissive seccomp filter that was applied by root without NO_NEW_PRIVS was able to add more filters to itself without setting NO_NEW_PRIVS by setting the new filter from a throwaway thread with NO_NEW_PRIVS. Signed-off-by:
Jann Horn <jann@thejh.net> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Milo Kim authored
commit 49f34134 upstream. Atmel AIC has common structure for SMR (Source Mode Register). bit[6:5] Interrupt source type bit[2:0] Priority level Other bits are unused. To update new priority value, bit[2:0] should be cleared first and then new priority level can be written. However, aic_common_set_priority() helper clears source type bits instead of priority bits. This patch fixes wrong mask bit operation. Fixes: b1479ebb "irqchip: atmel-aic: Add atmel AIC/AIC5 drivers" Signed-off-by:
Milo Kim <milo.kim@ti.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Nicholas Ferre <nicolas.ferre@atmel.com> Link: http://lkml.kernel.org/r/1452669592-3401-2-git-send-email-milo.kim@ti.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Wanpeng Li authored
commit 1ca8ec53 upstream. commit 0ff53d09 sets the next tick interrupt to the last jiffies update, i.e. in the past, because the forward operation is invoked before the set operation. There is no resulting damage (yet), but we get an extra pointless tick interrupt. Revert the order so we get the next tick interrupt in the future. Fixes: commit 0ff53d09 "tick: sched: Force tick interrupt and get rid of softirq magic" Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1453893967-3458-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by:
-
Peter Hurley authored
commit f4f9edcf upstream. As the function documentation for tty_ldisc_ref_wait() notes, it is only callable from a tty file_operations routine; otherwise there is no guarantee the ref won't be NULL. The key difference with the VT's paste_selection() is that is an ioctl, where __speakup_paste_selection() is completely async kworker, kicked off from interrupt context. Fixes: 28a821c3 ("Staging: speakup: Update __speakup_paste_selection() tty (ab)usage to match vt") Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Peter Hurley authored
commit 6d27a63c upstream. Although n_tty_check_unthrottle() has a valid ldisc reference (since the tty core gets the ldisc ref in tty_read() before calling the line discipline read() method), it does not have a valid ldisc reference to the "other" pty of a pty pair. Since getting an ldisc reference for tty->link essentially open-codes tty_wakeup(), just replace with the equivalent tty_wakeup(). Signed-off-by:
-
Peter Hurley authored
commit 5c17c861 upstream. ioctl(TIOCGETD) retrieves the line discipline id directly from the ldisc because the line discipline id (c_line) in termios is untrustworthy; userspace may have set termios via ioctl(TCSETS*) without actually changing the line discipline via ioctl(TIOCSETD). However, directly accessing the current ldisc via tty->ldisc is unsafe; the ldisc ptr dereferenced may be stale if the line discipline is changing via ioctl(TIOCSETD) or hangup. Wait for the line discipline reference (just like read() or write()) to retrieve the "current" line discipline id. Signed-off-by:
-
Alan Stern authored
commit 13b43891 upstream. Runtime suspend during driver probe and removal can cause problems. The driver's runtime_suspend or runtime_resume callbacks may invoked before the driver has finished binding to the device or after the driver has unbound from the device. This problem shows up with the sd and sr drivers, and can cause disk or CD/DVD drives to become unusable as a result. The fix is simple. The drivers store a pointer to the scsi_disk or scsi_cd structure as their private device data when probing is finished, so we simply have to be sure to clear the private data during removal and test it during runtime suspend/resume. This fixes <https://bugs.debian.org/801925>. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Paul Menzel <paul.menzel@giantmonkey.de> Reported-by:
Erich Schubert <erich@debian.org> Reported-by:
Alexandre Rossi <alexandre.rossi@gmail.com> Tested-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Gavin Shan authored
commit 7e56f627 upstream. In eeh_pe_loc_get(), the PE location code is retrieved from the "ibm,loc-code" property of the device node for the bridge of the PE's primary bus. It's not correct because the property indicates the parent PE's location code. This reads the correct PE location code from "ibm,io-base-loc-code" or "ibm,slot-location-code" property of PE parent bus's device node. Fixes: 357b2f3d ("powerpc/eeh: Dump PE location code") Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Jan Beulich authored
commit 3625c2c2 upstream. For PAE kernels "unsigned long" is not suitable to hold page protection flags, since _PAGE_NX doesn't fit there. This is the reason for quite a few W+X pages getting reported as insecure during boot (observed namely for the entire initrd range). Fixes: 281d4078 ("x86: Make page cache mode a real type") Signed-off-by:
Jan Beulich <jbeulich@suse.com> Reviewed-by:
Juergen Gross <JGross@suse.com> Link: http://lkml.kernel.org/r/56A7635602000078000CAFF1@prv-mh.provo.novell.comSigned-off-by:
-
Mika Penttilä authored
commit 57adec86 upstream. Calling apply_to_page_range with an empty range results in a BUG_ON from the core code. This can be triggered by trying to load the st_drv module with CONFIG_DEBUG_SET_MODULE_RONX enabled: kernel BUG at mm/memory.c:1874! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 3 PID: 1764 Comm: insmod Not tainted 4.5.0-rc1+ #2 Hardware name: ARM Juno development board (r0) (DT) task: ffffffc9763b8000 ti: ffffffc975af8000 task.ti: ffffffc975af8000 PC is at apply_to_page_range+0x2cc/0x2d0 LR is at change_memory_common+0x80/0x108 This patch fixes the issue by making change_memory_common (called by the set_memory_* functions) a NOP when numpages == 0, therefore avoiding the erroneous call to apply_to_page_range and bringing us into line with x86 and s390. Reviewed-by:
Laura Abbott <labbott@redhat.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Mika Penttilä <mika.penttila@nextfour.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
dann frazier authored
commit 67dfa175 upstream. GCC6 (and Linaro's 2015.12 snapshot of GCC5) has a new default that uses adrp/ldr or adrp/add to address literal pools. When CONFIG_ARM64_ERRATUM_843419 is enabled, modules built with this toolchain fail to load: module libahci: unsupported RELA relocation: 275 This patch fixes the problem by passing '-mpc-relative-literal-loads' to the compiler. Fixes: df057cc7 ("arm64: errata: add module build workaround for erratum #843419") BugLink: http://bugs.launchpad.net/bugs/1533009Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by:
Christophe Lyon <christophe.lyon@linaro.org> Signed-off-by:
Dann Frazier <dann.frazier@canonical.com> Signed-off-by:
-
Lucas Tanure authored
commit 07905298 upstream. The return type "unsigned int" was used by the get_formation_index function despite of the aspect that it will eventually return a negative error code. So, change to signed int and get index by reference in the parameters. Done with the help of Coccinelle. [Fix the missing braces suggested by Julia Lawall -- tiwai] Signed-off-by:
Lucas Tanure <tanure@linux.com> Reviewed-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by:
-
Michael S. Tsirkin authored
commit 2989be09 upstream. KASan detected a use-after-free error in virtio-pci remove code. In virtio_pci_remove(), vp_dev is still used after being freed in unregister_virtio_device() (in virtio_pci_release_dev() more precisely). To fix, keep a reference until cleanup is done. Fixes: 63bd62a0 ("virtio_pci: defer kfree until release callback") Reported-by:
Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Tested-by:
-
Guillaume Fougnies authored
commit 5a4ff9ec upstream. TEAC UD-501/UD-503/NT-503 fail to switch properly between different rate/format. Similar to 'Playback Design', this patch corrects the invalid clock source error for TEAC products and avoids complete freeze of the usb interface of 503 series. Signed-off-by:
Guillaume Fougnies <guillaume@eulerian.com> Signed-off-by:
-
Takashi Iwai authored
commit 462b3f16 upstream. Some architectures like PowerPC can handle the maximum struct size in an ioctl only up to 13 bits, and struct snd_compr_codec_caps used by SNDRV_COMPRESS_GET_CODEC_CAPS ioctl overflows this limit. This problem was revealed recently by a powerpc change, as it's now treated as a fatal build error. This patch is a stop-gap for that: for architectures with less than 14 bit ioctl struct size, get rid of the handling of the relevant ioctl. We should provide an alternative equivalent ioctl code later, but for now just paper over it. Luckily, the compress API hasn't been used on such architectures, so the impact must be effectively zero. Reviewed-by:
Mark Brown <broonie@kernel.org> Acked-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
John Ernberg authored
commit 4152b387 upstream. In certain kernel configurations where the cdc_ether and option drivers are compiled as modules there can occur a race condition in enumeration. This causes the option driver to enumerate the ethernet(wwan) interface as usb-serial interfaces. usb-devices output for the modem: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=0055 Rev=00.00 S: Manufacturer=Cinterion S: Product=AHx C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by:
John Ernberg <john.ernberg@actia.se> Fixes: 1941138e ("USB: added support for Cinterion's products...") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Lorenzo Pieralisi authored
commit f436b2ac upstream. The Performance Monitors extension is an optional feature of the AArch64 architecture, therefore, in order to access Performance Monitors registers safely, the kernel should detect the architected PMU unit presence through the ID_AA64DFR0_EL1 register PMUVer field before accessing them. This patch implements a guard by reading the ID_AA64DFR0_EL1 register PMUVer field to detect the architected PMU presence and prevent accessing PMU system registers if the Performance Monitors extension is not implemented in the core. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Fixes: 60792ad3 ("arm64: kernel: enforce pmuserenr_el0 initialization and restore") Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
-
Greg Kroah-Hartman authored
commit e03cdf22 upstream. Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by:
Harald Linden <harald.linden@7183.org> Signed-off-by:
-
Takashi Iwai authored
commit da10816e upstream. ALSA OSS sequencer spews a kernel error message ("ALSA: seq_oss: too many applications") when user-space tries to open more than the limit. This means that it can easily fill the log buffer. Since it's merely a normal error, it's safe to suppress it via pr_debug() instead. Signed-off-by:
-
Takashi Iwai authored
commit 59915133 upstream. ALSA sequencer OSS emulation code has a sanity check for currently opened devices, but there is a thinko there, eventually it spews warnings and skips the operation wrongly like: WARNING: CPU: 1 PID: 7573 at sound/core/seq/oss/seq_oss_synth.c:311 Fix this off-by-one error. Reported-by:
-
Daniele Palmas authored
commit ff4e2494 upstream. This patch adds support for two PIDs of LE922. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Vladis Dronov authored
commit cb323213 upstream. The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Fixes: cfb8da8f ("USB: visor: fix initialisation of UX50/TH55 devices") Signed-off-by:
-
Johan Hovold authored
commit cac9b50b upstream. Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Peter Dedecker authored
commit f487c54d upstream. Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by:
Peter Dedecker <peter.dedecker@hotmail.com> Signed-off-by:
-
Du, Changbin authored
commit d8f00cd6 upstream. In function usb_reset_and_verify_device, the old BOS descriptor may still be used before allocating a new one. (usb_unlocked_disable_lpm function uses it under the situation that it fails to disable lpm.) So we cannot set the udev->bos to NULL before that, just keep what it was. It will be overwrite when allocating a new one. Crash log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8171f98d>] usb_enable_link_state+0x2d/0x2f0 Call Trace: [<ffffffff8171ed5b>] ? usb_set_lpm_timeout+0x12b/0x140 [<ffffffff8171fcd1>] usb_enable_lpm+0x81/0xa0 [<ffffffff8171fdd8>] usb_disable_lpm+0xa8/0xc0 [<ffffffff8171fe1c>] usb_unlocked_disable_lpm+0x2c/0x50 [<ffffffff81723933>] usb_reset_and_verify_device+0xc3/0x710 [<ffffffff8172c4ed>] ? usb_sg_wait+0x13d/0x190 [<ffffffff81724743>] usb_reset_device+0x133/0x280 [<ffffffff8179ccd1>] usb_stor_port_reset+0x61/0x70 [<ffffffff8179cd68>] usb_stor_invoke_transport+0x88/0x520 Signed-off-by:
Du, Changbin <changbin.du@intel.com> Signed-off-by:
-
Oliver Neukum authored
commit e912e685 upstream. This phone needs to be handled by a specialised firmware tool and is reported to crash irrevocably if cdc-acm takes it. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Lu Baolu authored
commit ffdb1e36 upstream. For Intel 7260 modem, it is needed for host side to send zero packet if the BULK OUT size is equal to USB endpoint max packet length. Otherwise, modem side may still wait for more data and cannot give response to host side. Signed-off-by:
Konrad Leszczynski <konrad.leszczynski@intel.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Lu Baolu authored
commit 19454462 upstream. In current acm driver, the bulk-in callback function ignores the URBs unlinked in usb core. This causes unexpected data loss in some cases. For example, runtime suspend entry will unlinked all urbs and set urb->status to -ENOENT even those urbs might have data not processed yet. Hence, data loss occurs. This patch lets bulk-in callback function handle unlinked urbs to avoid data loss. Signed-off-by:
Tang Jian Qiang <jianqiang.tang@intel.com> Signed-off-by:
-
Thorsten Leemhuis authored
commit 6220f4eb upstream. Since Linux 4.0 the CPU fan speed is going up and down on Dell Studio XPS 8000 and 8100 for unknown reasons. The 8100 was already blacklisted in commit a4b45b25 ("hwmon: (dell-smm) Blacklist Dell Studio XPS 8100"). This patch blacklists the XPS 8000. Without further debugging on the affected machine, it is not possible to find the problem. For more details see https://bugzilla.kernel.org/show_bug.cgi?id=100121Signed-off-by:
Thorsten Leemhuis <linux@leemhuis.info> Acked-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
-
Insu Yun authored
commit 2c3033a0 upstream. In acpiphp_enable_slot(), there is a missing unlock path when error occurred. It needs to be unlocked before returning an error. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit b186b4dc upstream. The quirk to get "acpi_backlight=vendor" behavior by default on the Dell Inspiron 5737 was added before we started doing "acpi_backlight=native" by default on Win8 ready machines. Since we now avoid using acpi-video as backlight driver on these machines by default (using the native driver instead) we no longer need this quirk. Moreover the vendor driver does not work after a suspend/resume where as the native driver does. This reverts commit 08a56226 (ACPI / video: Add Dell Inspiron 5737 to the blacklist). Link: https://bugzilla.kernel.org/show_bug.cgi?id=111061 Reported-and-tested-by: erusan@gmail.com Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit cc78eb22 upstream. Firmware is LE. Need to properly byteswap some of the fields so they are interpreted correctly by the driver on BE systems. Reviewed-by:
-
Christian König authored
commit 78d0e182 upstream. We could pin BOs into invisible VRAM otherwise. v2: make logic more readable as suggested by Michel Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
