- 05 Jul, 2012 11 commits
-
-
Paulo Zanoni authored
Previously we had has_pch_split to tell us whether we had a PCH or not and we also had dev_priv->pch_type to tell us which kind of PCH it was, but it could only be used if we were 100% sure we did have a PCH. Now that PCH_NONE was added to dev_priv->pch_type we don't need has_pch_split anymore: we can just check for pch_type != PCH_NONE. The HAS_PCH_{IBX,CPT,LPT} macros use dev_priv->pch_type, so they can only be called after intel_detect_pch. The HAS_PCH_SPLIT macro looks at dev_priv->info->has_pch_split, which is available earlier. Since the goal is to implement HAS_PCH_SPLIT using dev_priv->pch_type instead of dev_priv->info->has_pch_split, we need to make sure that intel_detect_pch is called before any calls to HAS_PCH_SPLIT are made. So we moved the intel_detect_pch call to an earlier stage. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
And rely on the fact that it's 0 to assume that machines without a PCH will have PCH_NONE as dev_priv->pch_type. Just today I finally realized that HAS_PCH_IBX is true for machines without a PCH. IMHO this is totally counter-intuitive and I don't think it's a good idea to assume that we're going to check for HAS_PCH_IBX only after we check for HAS_PCH_SPLIT. I believe that in the future we'll have more PCH types and checks like: if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) will become more and more common. There's a good chance that we may break non-PCH machines by adding these checks in code that runs on all machines. I also believe that the HAS_PCH_SPLIT check will become less common as we add more and more different PCH types. We'll probably start replacing checks like: if (HAS_PCH_SPLIT(dev)) foo(); else bar(); with: if (HAS_PCH_NEW(dev)) baz(); else if (HAS_PCH_OLD(dev) || HAS_PCH_IBX(dev)) foo(); else bar(); and this may break gen 2/3/4. As far as we have investigated, this patch will affect the behavior of intel_hdmi_dpms and intel_dp_link_down on gen 4. In both functions the code inside the HAS_PCH_IBX check is for IBX-specific workarounds, so we should be safe. If we start bisecting gen 2/3/4 bugs to this commit we should consider replacing the HAS_PCH_IBX checks with something else. V2: Improve commit message, list possible side effects and solution. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
High frequency link configurations have the potential to cause trouble with long and/or cheap cables, so prefer slow and wide configurations instead. This patch has the potential to cause trouble for eDP configurations that lie about available lanes, so if we run into that we can make it conditional on eDP. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45801 Tested-by: peter@colberg.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
While creating the new enable/disable_gt_powersave functions in commit 8090c6b9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Jun 24 16:42:32 2012 +0200 drm/i915: wrap up gt powersave enabling functions I've botched up the handling of ironlake_disable_rc6. Fix this up by calling it at the right place. Note though that ironlake_disable_rc6 does a bit more than just disabling rc6 - it also tears down all the allocated context objects. Hence we need to move intel_teardown_rc6 out and directly call it from intel_modeset_cleanup. Also properly mark ironlake_enable_rc6 as static and kill the un-used declaration in i915_drv.h. Note: In review a question popped out why disable_rc6 also tears down the backing object and why we should move that out - it's simply for consistency with gen6+ rps code, which does it that way. Cc: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
This commit moves force wake support routines into intel_pm modules, and exports the gen6_gt_check_fifodbg routine (used in I915_READ). Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
For Haswell, on some of the early hardware revisions, it is possible to run into issues when RC6 state is enabled and when pipes change state. v2: add comment saying that this is for early revisions only. v3: beautify as suggested by Daniel Vetter. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
This is based on Ivy Bridge clock gating for now, but is subject to changes in the future. Note: Compared to the ivb clock gating this drops the the IDICOS medium uncore sharing tuned in commit 20848223 Author: Ben Widawsky <ben@bwidawsk.net> Date: Fri May 4 18:58:59 2012 -0700 drm/i915: set IDICOS to medium uncore resources Eugeni wants to benchmark the effect of this first. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> [danvet: added note] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
We weren't disabling RC6 bits when bringing down RPS. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
It should be working so let's turn it on by default and catch any possible issues faster. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
Just a cosmetic change to simplify the if statement. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
Most of the RPS and RC6 enabling functionality is similar to what we had on Gen6/Gen7, so we preserve most of the registers. Note that Haswell only has RC6, so account for that as well. As suggested by Daniel Vetter, to reduce the amount of changes in the patch, we still write the RC6p/RC6pp thresholds, but those are ignored on Haswell. Note: Some discussion about the nature of the new tuning constants popped up in review - the answer is that we don't know why they've changed, but the guide from VPG with the magic numbers simply has different values now. v2: Squash fix for ?: vs | operation precende bug into this patch. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Added note to commit message. Squashed fix.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 03 Jul, 2012 3 commits
-
-
Eugeni Dodonov authored
There is a different ACK register for force wake on Haswell, so account for that. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
As a w/a to prevent reads sporadically returning 0, we need to wait for the GT thread to return to TC0 before proceeding to read the registers. v2: adapt for Haswell changes (Eugeni). v3: use wait_for_atomic_us for thread status polling. v3: *really* use wait_for_atomic for polling. References: https://bugs.freedesktop.org/show_bug.cgi?id=50243Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
Tidy up the routines for interacting with the GT (in particular the forcewake dance) which are scattered throughout the code in a single structure. v2: use wait_for_atomic for polling. v3: *really* use wait_for_atomic for polling. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 29 Jun, 2012 1 commit
-
-
Ben Widawsky authored
Daniel complained about this on initial review, but he graciously moved the patches forward. As promised, I am delivering the desired cleanup now. Hopefully I didn't screw the trivial patch up ;-) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 28 Jun, 2012 2 commits
-
-
Paulo Zanoni authored
Looks like a copy/paste error. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
The prep to remove the flushing list in commit cc889e0f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Jun 13 20:45:19 2012 +0200 drm/i915: disable flushing_list/gpu_write_list causes quite some decent regressions. We can fix this by setting the CS_STALL bit to ensure that the following seqno write happens only after the cache flush has completed. But only do that when the caller actually wants the flush (and not also when we invalidate caches before starting the next batch). I've looked through all our ancient scrolls about gen6+ pipe control workarounds, and this seems to be indeed a legal combination: We're allowed to set the CS_STALL bit when we flush the render cache (which we do). While yelling at this code, also pass back the return value from intel_emit_post_sync_nonzero_flush properly. v2: Instead of emitting more pipe controls, set the CS_STALL bit on the write flush as suggested by Chris Wilson. It seems to work, too. Cc: Eric Anholt <eric@anholt.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51436 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51429Tested-by: Lu Hua <huax.lu@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 27 Jun, 2012 3 commits
-
-
Jesper Juhl authored
If we ever hit the default case in the switch statement we'll return from the function without freeing the memory we just allocated to 'intel_plane' (but that has not been used). This patch gets rid of the leak by freeing the memory just before we return. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
We shouldn't hit this path anyway, but make it use the IVB sprite format definition to avoid confusion. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
Or going from tiled to untiled may break. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 25 Jun, 2012 6 commits
-
-
Daniel Vetter authored
drm/i915 now takes care itself of setting up the gtt for these chips. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
This is the quick&dirty way Dave Airlie suggested to workaround the midlayer drm agp brain-damange. Note that i915_probe is only called when the driver has ksm enabled, so no need to check for that. We also need to move the intel_agp_enabled check at the right place. Note that the only thing this does is enforce the correct module load order (by using a symbol from intel-agp.ko) to ensure that the fake agp driver is ready before the drm core tries to set up the agp stuff. v2: Add a comment to explain why gen3 needs all this legacy fake agp stuff - we've shipped an XvMC library with a kms-enabled ddx that requires it (but only on gen3). v3: Make it clear that this is only a gen3 issue in the comment. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
This single leftover use is due to a patch that went into 3.5 through -fixes. With the fake agp stuff on demise, at least for gen6+ we can't use this any more. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
The enable functions grabbed dev->struct_mutex themselves, whereas the disable functions expected dev->struct_mutex to be held by the caller. Move the locking out to the (currently only) callsite of intel_enable_gt_powersave to make this more consistent. Originally this was prep work for future patches, but I've chased down a totally wrong alley. Still, I think this is a sensible clarification. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
... instead of calling each one for each generation indiviudally. Notice that we've already managed to be inconsistent, the resume path is missing an IS_VLV check. As a nice benefit we can mark all the platform specific enable/disable functions as static and hide them in intel_pm.c Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
I want to merge the "no more fake agp on gen6+" patches into drm-intel-next (well, the last pieces). But a patch in 3.5-rc4 also adds a new use of dev->agp. Hence the backmarge to sort this out, for otherwise drm-intel-next merged into Linus' tree would conflict in the relevant code, things would compile but nicely OOPS at driver load :( Conflicts in this merge are just simple cases of "both branches changed/added lines at the same place". The only tricky part is to keep the order correct wrt the unwind code in case of errors in intel_ringbuffer.c (and the MI_DISPLAY_FLIP #defines in i915_reg.h together, obviously). Conflicts: drivers/gpu/drm/i915/i915_reg.h drivers/gpu/drm/i915/intel_ringbuffer.c Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 24 Jun, 2012 7 commits
-
-
Linus Torvalds authored
-
Anatol Pomozov authored
Coult -> Could Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Avi Kivity: "Fixing a scheduling-while-atomic bug in the ppc code, and a bug which allowed pci bridges to be assigned to guests." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_page KVM: Fix PCI header check on device assignment
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull InfiniBand/RDMA fixes from Roland Dreier: - Fixes to new ocrdma driver - Typo in test in CMA * tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: QP type check on received REQs should be AND not OR RDMA/ocrdma: Fix off by one in ocrdma_query_gid() RDMA/ocrdma: Fixed RQ error CQE polling RDMA/ocrdma: Correct queue SGE calculation RDMA/ocrdma: Correct reported max queue sizes RDMA/ocrdma: Fixed GID table for vlan and events
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Nothing very controversial in here. Most of the fixes are for OMAP this time around, with some orion/kirkwood and a tegra patch mixed in." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion: Fix Virtual/Physical mixup with watchdog ARM: Kirkwood: clk_register_gate_fn: add fn assignment ARM: Orion5x - Restore parts of io.h, with rework ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled ARM: OMAP2+: mux: fix sparse warning ARM: OMAP2+: CM: increase the module disable timeout ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks ARM: OMAP4: hwmod data: fix 32k sync timer idle modes ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby ARM: OMAP: Fix Beagleboard DVI reset gpio arm/dts: OMAP2: Fix interrupt controller binding ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0 ARM: OMAP2+: Fix MUSB ifdefs for platform init code ARM: tegra: make tegra_cpu_reset_handler_enable() __init ARM: OMAP: PM: Lock clocks list while generating summary ARM: iconnect: Remove include of removed linux/spi/orion_spi.h
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing major in here, one radeon SI fix for tiling, and one uninit var fix, two minor header file fixes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: drop comment about this header being autogenerated. drm/edid: don't return stack garbage from supports_rb vga_switcheroo: Add include guard drm/radeon: SI tiling fixes for display
-
Roland Dreier authored
-
- 23 Jun, 2012 6 commits
-
-
Andrew Lunn authored
The orion watchdog is expecting to be passed the physcial address of the hardware, and will ioremap() it to give a virtual address it will use as the base address for the hardware. However, when creating the platform resource record, a virtual address was being used. Add the necassary #define's so we can pass the physical address as expected. Tested on Kirkwood and Orion5x. Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Marc Kleine-Budde authored
In commit: 98d9986c ARM: Kirkwood: Replace clock gating the kirkwood clock gating has been reworked. A custom variant of clock gating, that calls a custom function before gating the clock off, has been introduced. However in clk_register_gate_fn() this custom function "fn" is never assigned. This patch adds the missing fn assignment. Cc: stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Andrew Lunn authored
Commit 4d5fc58d (ARM: remove bunch of now unused mach/io.h files) removed the orion5x io.h. Unfortunately, this is still needed for the definition of IO_SPACE_LIMIT which overrides the default 64K. All Orion based systems have 1Mbyte of IO space per PCI[e] bus, and try to request_resource() this size. Orion5x has two such PCI buses. It is likely that the original, removed version, was broken. This version might be less broken. However, it has not been tested on hardware with a PCI card, let alone hardware with a PCI card with IO capabilities. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-fixes-a-for-3.5rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley (as per Tony Lindgren's request): "Some uncontroversial OMAP clock, hwmod, and compiler warning fixes for 3.5-rc" * tag 'omap-fixes-a-for-3.5rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled ARM: OMAP2+: mux: fix sparse warning ARM: OMAP2+: CM: increase the module disable timeout ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks ARM: OMAP4: hwmod data: fix 32k sync timer idle modes ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby ARM: OMAP: PM: Lock clocks list while generating summary
-
Olof Johansson authored
Merge tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here are a few fixes with the biggest one being fix for Beagle DVI reset. All of them are regression fixes, except for the missing omap2 interrupt controller binding that somehow got missed earlier." * tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: Fix Beagleboard DVI reset gpio arm/dts: OMAP2: Fix interrupt controller binding ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0 ARM: OMAP2+: Fix MUSB ifdefs for platform init code
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Sage Weil: "There are a couple of fixes from Yan for bad pointer dereferences in the messenger code and when fiddling with page->private after page migration, a fix from Alex for a use-after-free in the osd client code, and a couple fixes for the message refcounting and shutdown ordering." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: flush msgr queue during mon_client shutdown rbd: Clear ceph_msg->bio_iter for retransmitted message libceph: use con get/put ops from osd_client libceph: osd_client: don't drop reply reference too early ceph: check PG_Private flag before accessing page->private
-
- 22 Jun, 2012 1 commit
-
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull XFS fixes from Ben Myers: - Fix stale data exposure with unwritten extents - Fix a warning in xfs_alloc_vextent with ODEBUG - Fix overallocation and alignment of pages for xfs_bufs - Fix a cursor leak - Fix a log hang - Fix a crash related to xfs_sync_worker - Rename xfs log structure from struct log to struct xlog so we can use crash dumps effectively * tag 'for-linus-Jun-21-2012' of git://oss.sgi.com/xfs/xfs: xfs: rename log structure to xlog xfs: shutdown xfs_sync_worker before the log xfs: Fix overallocation in xfs_buf_allocate_memory() xfs: fix allocbt cursor leak in xfs_alloc_ag_vextent_near xfs: check for stale inode before acquiring iflock on push xfs: fix debug_object WARN at xfs_alloc_vextent() xfs: xfs_vm_writepage clear iomap_valid when !buffer_uptodate (REV2)
-