- 11 Sep, 2012 40 commits
-
-
Sujith Manoharan authored
Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
The register macros for antenna diversity are common for AR9462 and AR9565, rename them. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Avinash Patil authored
This patch adds separate tx packet descriptor routine for AP interface. This function fills bss_type, bss_num, wmm packet delay information etc for TxPD going on AP interface. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Bing Zhao authored
Some platforms do not support WOW. Let's change the default wakeup criteria to 0. Signed-off-by:
-
Amitkumar Karwar authored
country 00 (world regulatory domain) doesn't define channels 52 - 64 and 100 - 140. Add these channels to our custom world regulatory domain. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Bing Zhao authored
We will use world regulatory domain (country 00) as default when driver is loaded. Later after a successful association cfg80211 will change the regulatory domain to a specific country if the AP has advertised country IE. Signed-off-by:
-
Amitkumar Karwar authored
AP's country ie is parsed and 11d information is updated in firmware while associating. Previous mwifiex_send_domain_info_cmd_fw() call in association path is not necessary now. Hence it is removed in this patch. Signed-off-by:
-
Amitkumar Karwar authored
"adapter->bss_prio_tbl[j].bss_prio_head" points to linked list of interfaces with priority 'j'. "bss_prio_tbl[j].bss_prio_cur" is supposed to point to next interface every time the routine for dequeuing the packet is called. This ensures that each interface gets fair chance. Currently we have AP and station interfaces with priority '0'. Therefore "adapter->bss_prio_tbl[0].bss_prio_cur" should alternately point to AP and station nodes. Since "bss_prio_cur" is not correctly updated, for each packet picked for AP, two packets are picked for station interface. This patch fixes the problem by correctly updating "bss_prio_cur". Signed-off-by:
-
Amitkumar Karwar authored
Currently AP interface has higher priority over station. Hence separate entries are created in "adapter->bss_prio_tbl" for these interfaces and station packet is dequeued only if there is not packet in queue for AP. It is observed that ping for station interface doesn't work if heavy traffic is running on AP. The problem is fixed by having same priority for both the interfaces. This patch also removes an extra initialisation for "priv->bss_priority". Signed-off-by:
-
Amitkumar Karwar authored
HostCmd_CMD_AMSDU_AGGR_CTRL is never called with GET action. So the code in mwifiex_ret_amsdu_aggr_ctrl() becomes redundant. Signed-off-by:
-
Amitkumar Karwar authored
HostCmd_CMD_11N_CFG is never called with GET action. So the code in mwifiex_ret_11n_cfg() becomes redundant. Signed-off-by:
-
Amitkumar Karwar authored
We don't send this command with GET action. Redundant code in mwifiex_ret_subsc_evt() is removed in this patch. Signed-off-by:
-
Rajkumar Manoharan authored
Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
Signed-off-by:
-
Rajkumar Manoharan authored
Whenever BT calibration requested, WLAN has to wait for the calibration to be completed. But right now we defer the waiting which might cause BT calibration to fail. Fix that. Signed-off-by:
-
Wei Yongjun authored
In rndis_scan(), 'request' is actually always valid pointer and the !request check is unneeded, so remove it. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
-
Sujith Manoharan authored
Enable AR9565. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Exclude CCK spur mitigation, freq 2437 for OFDM and add AR9565-specific logic. Signed-off-by:
-
Sujith Manoharan authored
Also, set the correct chainmask. Signed-off-by:
-
Sujith Manoharan authored
Various parts of the code require AR9565 checks, this patch adds them. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
And recognize the device in the init path. Signed-off-by:
-
Christian Lamparter authored
This patch fixes a regression which was introduced in: "mac80211: move TX station pointer and restructure TX" IP: p54_tx_80211+0x21/0x513 [p54common] Oops: 0000 [#1] SMP Modules linked in: p54usb p54common [...] Pid: 13394, comm: hostapd 3.6.0-rc4-wl+ RIP: 0010:p54_tx_80211+0x21/0x513 RSP: 0018:... EFLAGS: 00010292 [...] Process hostapd Stack: [...] Call Trace: p54_bss_info_changed+0x204/0x21e [p54common] ieee80211_del_station+0x16/0x32 [mac80211] ieee80211_start_ap+0x10f/0x157 [mac80211] nl80211_start_ap+0x315/0x361 [cfg80211] p54_tx_80211 function is called as part of the beacon update. The caller p54_bss_info_changed has to supply a valid tx control struct, or the control->sta will lead to a null pointer dereference. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Having generic hardware timer interrupt in debugfs would come handy when we are debugging 3 WIRE BTCOEX issues. Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
Read and configure thermometer calibration results read from OTP card. Signed-off-by:
-
Rajkumar Manoharan authored
Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Andy Shevchenko authored
The hex2str() is substituted by '%*phD' specificator. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by:
-
Mohammed Shafi Shajakhan authored
Before disabling BTCOEX in the h/w cancel all BTCOEX related works. This is similar to the commit in ath9k(c32cdbd8) ath9k: Stop the BTCOEX timers before disabling BTCOEX Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Enable BTCOEX for WB193(which seems to be the only supported ath9k_htc BTCOEX chipset)only when it is enabled via modparam, rather than enabling it by default. Cc: Vivek Natarajan <nataraja@qualcomm.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Signed-off-by:
-
Mohammed Shafi Shajakhan authored
*Remove all the checks that will be handled by cfg80211 based on the interface combination advertised. For instance, driver supports at the maximum 8 beaconing interface, while we advertise maximum 8 beaconing interface in the interface combination support. *cfg80211 will take care of not allowing us to add an interface that is not supported by the driver, further if the change_interface changes the old interface to a beaconing interface while we had reached the max limit of 8 beaconing interface, again cfg80211 takes care of this stuff! So remove all these checks. *Beautify placing PS wrappers in the appropriate position. Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Additionally it has a neat debug message informing us that we are stopping the ANI algorithm. Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Its more correct to convert btcoex_period to 'us' while comparing with btcoex_no_stomp which is in 'us'. Did not find any functionality issues being fixed, as the generic hardware timer triggers are usually refreshed with the newer duty cycle. Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
There is a possibility that AR_MCI_GPM_1 register can return 0xdeadbeef and this results in caching of invalid GPM index in ar9003_mci_is_gpm_valid. Ensure we have appropriate checks to avoid this. Cc: xijin luo <xijin@qca.qualcomm.com> Signed-off-by:
-
Andi Kleen authored
gcc 4.8 warns for this memcpy. While the copy size is correct, the whole copy seems to be a nop because the destination is never used, and there's no need to use memcpy to copy pointers anyways. And the type of the pointer was wrong, but at least those are always the same. Just remove it. /backup/lsrc/git/linux-lto-2.6/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c: In function 'ai_detach': /backup/lsrc/git/linux-lto-2.6/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c:539:32: warning: argument to 'sizeof' in 'memcpy' call is the same pointer type 'struct si_pub **' as the destination; expected 'struct si_pub *' or an explicit length [-Wsizeof-pointer-memaccess] memcpy(&si_local, &sih, sizeof(struct si_pub **)); ^ Signed-off-by:Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
